The fact you did mouse clicks while testing noise was extremely helpful compared to other noise test videos. It served as a reference sound and allowed user to adjust volume to match the loudness of their mouse click.

@ndgoliberty

Жыл бұрын

Yes

@alexokanenas7456

Жыл бұрын

+1000

@PerfectionHunter

Жыл бұрын

Yeah, too bad he forgot the last one at 3K RPM.

@ydihtty

Жыл бұрын

@@PerfectionHunter I figured at that point it would be so loud that it's a bit pointless. Still would serve as a good reference though

@georgeindestructible

9 ай бұрын

Exactly.

I installed it in the case yesterday. I get up this morning and my computer is gone, it has flown away.

@starrims

2 жыл бұрын

Lolllllll🤣

@haies09

Жыл бұрын

😂

@d0ba7a

4 ай бұрын

xaxaxa

@JohnIvoryMusic

Ай бұрын

LMAO

@lebraa

Ай бұрын

Blwn away vs flown away

0:05 I like how it started like a combustion engine car.

@r00tmaster84

Жыл бұрын

I see this as an absolute win

Your mouse click sound level reference was genius and indeed very helpful.

"Prepare for takeoff!"

I just bought 3 of these yesterday to use as front intake fans for my rig, I plan on using them at full blast when doing hard video encoding. I really don't care about noise, so as long as these things drop my temps then I'm fine with my rig sounding like an AC-130 taking off.

@MDGOrbit

2 жыл бұрын

Yeah I've been looking to them for the past couple days just wanna see what kind of way to control the speeds .

@NyaruZG

2 жыл бұрын

'CPU getting a heavy load and temperature increases' Me : "Scavac two-zero, cleared for takeoff runway zero-one" PC : "Cleared for takeoff runway zero-one, Scavac two-zero"

@NonLegitNation2

2 жыл бұрын

@@MDGOrbit I'm using MSI Dragon Center although I only have 3 options, 50%, 75% and 100% speed. I've been using 75% I was using 100% but there wasn't really any temp difference between 75% and 100% so I figured 75% since it's less power and less noise.

@pedropierre9594

2 жыл бұрын

😂

@pedropierre9594

2 жыл бұрын

@@NyaruZG ☠️

We going back to the ps4 with this one 🗣️🔥

Clear to Take Off 😂👍🏼

this helps me relax

Used these for a custom GPU mod. Great fans.

@jastrov

Жыл бұрын

@@uluth kzread.info/dash/bejne/pXd8yJmhnpWneto.html This On my other channel. A spoof video i made. Lol But the card is actually a GTX 1660Super with two 120mm Noctua IPPC fans.

God damn it's a fricking jet engine!

This is extremely helpful

Whats crazy is that's the RPM range of cars engines cruising on highway. 50 rotations a second ... thats nuts.

@Frozoken

Жыл бұрын

lol if you think that's crazy look at any delta fan, that makes even these noctuas look like child's play in terms of raw performance. They've got a 10000rpm (160 a second) 120mm fan that does nearly 200cfm with 23mm of static pressure. It's also 60db and uses over 20 watts per fan 💀.

Remembering that this model is aimed at the industrial line. According to the product specifications this fan has an airflow of 186.7 CFM and an acoustic noise of 43.5 dB. It's a monster created by Noctua hahahaha. I really liked the video. I'm sorry my English. I'm from Brazil. Hugs and sucess ever. Ah, it would be interesting to do the same type of test with other models of the brand. NF-F12-PWM, NF-P12 Redux-1300 PWM, NF-A12x15 PWM Thanks!!

@avijitsinha9286

2 жыл бұрын

Its 186.7 m cube per hour...which when converted gives 109 CFM

@dazeen9591

Жыл бұрын

@@avijitsinha9286 no it's 158.5 CFM Edit: nvm I was looking at the 140mm version

@Frozoken

Жыл бұрын

@ッDazeen yeah as you said that's the 140mm and it'll be even louder because it doesn't lose any rpm at all compared to the 120mm 💀

@dazeen9591

Жыл бұрын

@@Frozoken I mean you can just the 140mm at lower RPM thus more quiet and get same airflow

@Frozoken

Жыл бұрын

@@dazeen9591 yes but then it wouldn't be the airflow u listed

1:45 I could dance to that sound!!! 😍

Not what i was expecting... thanks for this video, saved me some money xD

@emma6648

2 жыл бұрын

I mean tbf why would you look at 3000rpm fans and expect them to be quiet

@enjoyed_lemon

2 жыл бұрын

@@emma6648 there is quiet then there is jet engine. A lot louder then I also expected for 3000rpm

@BrapBrapDorito

Жыл бұрын

@@enjoyed_lemon That’s because this is an industrial fan, so noise is no issue and thus not considered in the design. There is also a quieter 3000 RPM 14mm Noctua industrial fan as well (quieter because the blades and fins are less straightened, and thus don’t generate as many high pitches)

@kingtolgakevinpetersoffici2031

4 ай бұрын

This Fan is Not for home computers, it is for industrial use. 😊

@ariefhidayat2157

Ай бұрын

lol you think this piece of garbage has industrial level this nothing compared to delta avc and also san ace take a look at 200mm san ace at 1120cfm 1.4 kpa of pressure, this make noctua fan fly away​@@kingtolgakevinpetersoffici2031

i will probably buy a noctua fan and take the motor out for my small washing machine project because its so damn quite!

Beatifull lamborghini v10 sound 😂😂😂😂

Thank god I bought these. At full speed they are so much quieter than the evga fans that came on my aio.

@harryshuman9637

Жыл бұрын

You kidding me right? I got one of those, it sounds like a vacuum cleaner.

@reaperactualgaming3075

Жыл бұрын

@@harryshuman9637 brooo i love EVGA products but I have no idea how they made those damn fans so loud lmao. Highly recommend swapping the fans for these if you haven't yet. Otherwise its a fantastic cooler.

@harryshuman9637

Жыл бұрын

@@reaperactualgaming3075 No I mean the Noctua PPC-3000, it's loud as all hell. My case is open concept and it's sitting on the desk close to the monitor. At max RPM it's like putting your head close to a vacuum cleaner and turning it on. Very loud.

@reaperactualgaming3075

Жыл бұрын

@@harryshuman9637 i apparently have the regular f12 pwm fans on my radiator and they are super quiet.

@harryshuman9637

Жыл бұрын

@@reaperactualgaming3075 Yeah for sure, but in my setup I have to fight for ever degree I can get. It's a SFF case with 5800X3D and 3090 crammed into it.

What software do you use? Is it a shell script? Could you share it, thanks.

Somewhere on our little planet, there is a bloke that is worried about his new cpu and does this to his fans.

how much in DB (decibels) would you say the fan was at 1000rpm and 2000rpm respectively?

Ladies and gentlemen, good afternoon. Welcome on board TF42. This is Captain Sparrow speaking and I have some information about our flight. Our flight time today will be 2 hrs and our estimated time of arrival in..local time.

this sounds about accurate for racked rig, I'll take ten!

its louder than my 3 fans at 1800 rpm together oh my god

How much of a difference would it be to use 6 of these in a push/pull with a 360rad 120mm fans.. I know dumb question im very curious, or would 3 be enough

What would you recommend as a front fan for Asus GT501? Can you help me?

Have you or plans to tested the SilverStone Shark Force 120 ARGB Performance Enhanced 120mm PWM fan?

Thank you for the video. Was thinking about buying some of these for my SC846 fan wall but after hearing that, I think I'll pass! :)

I wish someone could do a CFM test on it at certain speeds like 1000 RPM, 1500 RPM 2000 RPM, 2500 RPM, and 3000 RPM. Might have to have special expensive equipment for that test though.

@ydihtty

2 жыл бұрын

Yeah. Also just measuring raw CFM isn't that helpful unless you're planning on using the fan with zero impedance. The NF-F12 is designed for good performance at high impedances, so it might be more helpful to measure CFM through a radiator or something like that.

@agataerminiapennisi5504

2 жыл бұрын

@@ydihtty Could you use an inexpensive Digital Decibel Meter? Unfortunately without it, understanding the actual noise is difficult.

@brianc5581

Жыл бұрын

@@agataerminiapennisi5504 Just imagine a fighter jet

@cipherbenchmarks

11 ай бұрын

What an annoying sound.

@matthewwarren7879

8 ай бұрын

@@cipherbenchmarks this recording had vibrations i don't have present on my nf 12. yes this thing is loud but i don't find it bothersome because i use headphones often when gaming and i run it silent when its not. my temps are ridiculously low.

What software is that?

these are the best fans

I have this fan, and I set it up to reach full speed only at extreme temperatures. I never heard him working.

Which is better 12v or 24v? Is it really loud?

Is that high pitch humming common. I bought some and installed. Runa fine at idle and minimal tasks. But she under load they have a loud humm like that. Which is annoying at times. Is there anyway to get rid of it?

@ydihtty

2 жыл бұрын

Do you mean the buzzing sound? Because the humming sound is just a consequence of this fan's design, unfortunately. But the motor buzzing audible at lower speeds is exclusive to the iPPC fans.

This video has saved me money. I do not want that noise in an HTPC. Thank you

if he had wings he would fly.

This video helped me a lot to get an idea of ​​how noisy this cooler is. I was thinking of buying 3 to use in my gamer setup, but after seeing how noisy it is, I'm going to stick with the conventional ones for computers.

@Todbrecher

Жыл бұрын

you do realise that other fans just stop accelerating at 1500RPM cause it's their limit? at 1500RPM this fan is quite silent, especially for it's performance.

@andso7068

Жыл бұрын

2.7 is probably the peak of noise, when would you actually need your fans to get that high?

@Lazaran

Жыл бұрын

​@@andso7068 for maximum cooling, but these have PWM and you can easily limit it to 2000rpm or whatever you want. These fans are better build quality and will last longer than the conventional ones.

@adsadsaddFQ

10 ай бұрын

it will never reach full speed if you set up it properly.

@-mrws-

7 ай бұрын

@@Todbrecher this one has an incredible airflow, but it isn't silent, even at 1.5k RPM, and not all fans are silent at this RPM's!

how long can it last with suck a small hub ?

imagine accidentally touching the fan at max rpm 💀

@ChutneyGames

2 жыл бұрын

I have it really only stings a bit but didn't cut

@DreadyBearBoi

Жыл бұрын

The fans have protection it will just die for a second after you stop it and start up again.

@frankvilla5750

Жыл бұрын

Does this little fan push air well.

@69grandpa69

Жыл бұрын

hey, I just did that today! about 1400 rpm actually. Not fun! and now I'm buying more!

@4Core100

Жыл бұрын

Nothing will happen, they are low torque 💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀

Jesus, this reminds me of The Batman's Batmobile start up

Will my pc fly away at around 2500 rpm

SOunds like those old plane engines at startup and idle and throttling up and down while parked on the ground lol but when it goes at high rpm speed then sounds like a jet engine xD

How did you reduce the rotation speed so much? The specification sheets say the minimum speed is 750 rpm?

@RolandBerneder

8 күн бұрын

Oh, i see, you have to set the PWM clock base to 25kHz

This video is so entertaining to watch lol

Was the fan taped to the table or something? i don't understand how a fan spinning that fast and pushing lots of air can just stay upright. unless it's not moving a lot of air

@ydihtty

2 жыл бұрын

I think there are a few factors that contribute to this: 1. This fan is moderate weight for its size (168g, 120x25mm). 2. This fan is designed to perform well in high-impedance applications. It does still move a lot of air in low impedance applications, but not as much as many other designs. 3. The effect of the cable. With the way I have the fan positioned in most of these videos, the cable is behind and below the fan, pulling it backwards slightly. I also have a lot of extensions weighing the cable down, which would increase the pull force. 4. The focus of the airflow. I think fans which create more focused airflow will generate more thrust force per unit of air moved. This fan has straight blades, and straight stator vanes, so the airflow isn't as focused as other designs with curved forward blades, and curved stator vanes. These are just guesses though.

Thank you, How did you manage to connect the fan externally and change the RPM, I would like to know for a project

@ydihtty

Жыл бұрын

I used the Noctua NA-FC1 and a bunch of extensions.

@martingeorge2006

Жыл бұрын

@@ydihtty did u do it over usb or did you connect it to a fan header

@ydihtty

Жыл бұрын

@@martingeorge2006 Connected to a fan header

Very nice men BR

Can I use pc fan like this to replace my noisy UPS cooling fan ???

I use one of these, I set the curve such that it functions like a normal fan but if my cpu were to hit 80c it kicks up to full.

I still want a 3000 RPM 200mm.

I own a 3D printer along with an enclosure. I can afford to make separate exhaust for entire unit, for my room is small. I would like to use this fan with activated carbon filter to terminate toxic odor, and recirculate the purified air. Is this possible?

Never have i ever felt such agony while watching a fan,i mean either ur pc is catching a cold or this thing gonna rip through the ceiling

I got this fan and it's louder than a bus engine

I put this pull push to alienware r10 cpu radiator, it is loud but not as stock fan.

Are we taking off?

Can it hover? Can it fly?

It's tolerable until it gets to 2100 RPM, then you can start to hear motor whine. At 1200 RPM, it's almost silent.

@ydihtty

Жыл бұрын

I think its an aero sound rather than a motor sound, due to interaction between the trailing edge of the blade and the leading edge of the stator vanes. They line up, instead of having more of an angle that other fans have, so they create a very audible tone.

@Magnulus76

Жыл бұрын

@@ydihtty It's difficult to design any fan that spins at 2200+ RPM and doesn't have a disagreeable sound. Compared to a cheap ball bearing fan, this fan is relatively quiet.

@ydihtty

Жыл бұрын

@@Magnulus76 This fan just has a bad design though. Look at every other fan which uses stator vanes, they are curved or angled to not line up with the trailing edge of the blades. This is the only fan which has them line up, and it ends up functioning similarly to a rotary siren. Plenty of other fan designs produce similar performance while sounding a lot less annoying. The radiator fan of my Radeon 6900XT LC is a good example, its a Delta FFB1212SJ-F00. I might try to do a video on this fan soon, its a great design.

@Magnulus76

Жыл бұрын

@@ydihtty The F12 isn't a static-pressure oriented fat, it's a flow fan, and isn't meant for heatsinks or radiators.

@ydihtty

Жыл бұрын

@@Magnulus76 Sorry, are you confused with the Arctic F12? Because what you said is true for that, but is not true for the Noctua NF-F12. Quoted from the Noctua website: "...the NF-F12’s Focused Flow™ system creates outstanding static pressure and focuses the airflow for superior performance on heatsinks and radiators." "Its commanding performance, exhaustive set of features and Noctua’s trusted premium quality make it an elite choice for use on air coolers, radiators and other pressure demanding applications." noctua.at/en/nf-f12-pwm Also check this page: noctua.at/en/which_fan_is_right_for_me And this page: noctua.at/en/nf-a12x25-performance-comparison-to-nf-f12-and-nf-s12a So what you describe would apply more to something like the NF-S12A or S12B.

Mines makes the same rattling noise at any level. Good fan, but that rattled noise bothers me the most compared to the RPM noise.

I have a NZXT h1 case and I wanted this fan to replace the stock one. but with the noise, well well well....

1800RPMあたりから、ファン自体が飛んでいきそうな音

Test a Noctua NF-A14 IPPC 3000PWM pls

Im just waiting for it to blow up, lmao! xD

I put 3 in my Mini Itx case lol, 2 intake and 1 exhaust

Ready for lift off

is this fan does good ( 3000rpm ) for inside my casing while gaming? my rtx 2060 somtimes make temp above 80 while gaming ?

@ydihtty

2 жыл бұрын

300rpm won't move much air, you might want higher speeds than that.

@fiveteensensei

2 жыл бұрын

@@ydihtty pardon me for my typo 🤣, it should be 3000

@ydihtty

2 жыл бұрын

Ah. Well 3000 rpm will move a lot of air, so it will keep stuff cool. It will just be very loud.

এই ফ্যান কি সার্ভার রুমে লাগালে কাজ হবে?

That was loud!

Just bought 2 of these and both has this very audible rapid clicking noise at low rpm. It gets less noticeable at 1300 rpm and above. I think I can also hear it in this video, is this normal? Or should I look into returning it?

@ydihtty

Жыл бұрын

I think this is normal, I think its due to the higher torque output of the motor. I could be wrong about the reason, but I'm pretty sure its normal.

Did someone else feel the wind? :)

I'm surprised it didn't tip over

My PC AIO fan sometimes reach 1800 RPM, With lot's of sound

Not bad. I SAID...NOT BAD.

Yeah its loud but 3000 rpm, its impressive

Slap 3 of these on a D15 air cooler and see how low the temps can get.

I feared a second the blade could fly out at above 2000 rpm

@ydihtty

Жыл бұрын

I have some 120mm fans which reach much higher speeds than this one

I thought he will change gear for a second

Website name

oh VTEC kicked in

kinda makes sense because these are meant for servers

When someone ask Noctua to create a noise and airflow monster : This happen

1:52 My grandfather's pc playing minesweeper.

And thats still less noise then my ps4 makes

120 mm or 140 mm ?

@VITAS874

Ай бұрын

140 for cold cpu 😂

Bit excessive for Rocket League, maybe … 🤔.. thank you for the video.

I'm surprised it didn't move across your desk and destroy everything

Industrial PPC fans aren’t supposed to be used in desktops, even Noctua claims that in their own website... Saying they’re louder than Normal Noctua fans!

Can I install on graphics card ♦️ my fan is broken you GPU fan need 3000rpm

What's amazing about these fans is when they're at 800 RPM they're quiet.

@enlargedquack

Жыл бұрын

Not these ones, there's a lot more fan noise than usual on this particular fan. Compare this to higher end noctua and it's a night and day difference

@jamesm568

Жыл бұрын

@@enlargedquack These industrial fans are high-end fans. I have eight of these industrial fans in my PC case and they are quite at 800 RPM. Definitely not as quiet as a quiet designated 800 RPM fan, but definitely not excessive in noise when set to 1,000 RPM or below. These industrial fans will also run at 450 RPM.

It sounds like the banshee in gta 5

lol at 2k RPM it sounds like it's about to blow up

This is a need, not a want.

Lmfao DDAAAYYYUUUUUUMNNN that is loud, but I’m one to not care about loudness if it keeps my temps low

@ydihtty

2 жыл бұрын

Honestly I feel like the Phanteks T30 is probably a better choice, it's often cheaper too from what I've seen.

That's not Quiet

@LuizFernando-ii4de

2 жыл бұрын

i was thinking the same kkkk

@NonLegitNation2

2 жыл бұрын

they're 3000rpm industrial fans, what were you expecting?

@ydihtty

2 жыл бұрын

@@NonLegitNation2 To be fair, they are also quite noisy even at lower speeds due to the blade/stator design, other industrial fans have (in my opinion) better designs in this regard.

At 3000 rpm: "and takeoff"

Isso é muito legal som da preste kkkkk

like a honda si

this sounds like my ps4

Is it me or does it make a crackling noise around 1000rpm

@ydihtty

2 жыл бұрын

The higher power motor of the iPPC fans does make some extra noise audible at lower RPMs.

I'm going to use it to remove the air from a KITCHEN, the noise really doesn't bother me anymore. I'm curious if anyone has tried something like this