Upholster door panels without sewing by using this layering technique. Add a logos or designs if desired.
Жүктеу.....
Пікірлер: 187
@SynergyAVE3 жыл бұрын
Nice to see all positive comments and surprising there are no haters complaining about something.
@RustyGlovebox
3 жыл бұрын
Thanks for stopping by and checking it out.
@MothershipVideos5 жыл бұрын
Lloyd you're top of the pops when it comes to DIY.
@RustyGlovebox
5 жыл бұрын
Thanks Noel, I like trying my hand at many different projects. Have a great week.
@ToddAndrewCole5 жыл бұрын
Hi Lloyd! I found your video particularly interesting because I've been thinking about trying to make new door panels for my 1981 VW Rabbit pickup. Congratulations on winning a poem book! Thank you for the video. Take care.
@RustyGlovebox
5 жыл бұрын
Thanks Todd, it is a great alternative for the Do-it-yourselfer. Thanks for the poetry book , looking forward to it. Enjoy your week.
@PappysCorner5 жыл бұрын
Thanks Lloyd learn something new every day. The door panel turned our real nice and white has got to be difficult to keep white when playing with glue.!!... great job.!!
@RustyGlovebox
5 жыл бұрын
It wasn't impossible but you have to be a little careful. Thanks Pappy and take care
@thisoldcar51122 жыл бұрын
This is terrific! I can sew but don't have a machine for heavy duty material so this is a great alternative. I love this idea and may do some custom door panels on my restoration projects
@RustyGlovebox
2 жыл бұрын
Thanks, I was happy how easy it goes together after collecting all the parts .
@Buckswoodshop5 жыл бұрын
Neat to see all the pieces come together.
@RustyGlovebox
5 жыл бұрын
Thanks, getting to see all the parts come together make the work worth while. Enjoy your week
@rockerpat10855 жыл бұрын
Excellent work my friend!!! Will come in handy for the 39!!! Keep Rocking it out Lloyd!!!
@RustyGlovebox
5 жыл бұрын
Any model vehicle with flat door panels and it would be great for. Thanks Pat and Good luck.
@mazdalorean5 жыл бұрын
Nice job Lloyd . Thanks for sharing. Joe
@RustyGlovebox
5 жыл бұрын
Thanks Joe, I was pleased how the panels came out and they look good installed too. Enjoy your week.
@GardenTractorBoy5 жыл бұрын
Great video, thanks for sharing. I have never seen this technique before and it came out great. Good job
@RustyGlovebox
5 жыл бұрын
Thanks, it is going to work great for the Studebaker interior. Take care
@jankotze19595 жыл бұрын
That was really nice my Friend, great job, for some reason I missed this video
@leongrice66644 жыл бұрын
Great work. I'm sure to try this. God bless
@Bigskyguy563 жыл бұрын
Great video. Thanks for posting, you have solved the interior build issue on my 29 Model A p/u.
@RustyGlovebox
3 жыл бұрын
Glad it helped
@LarryDeSilva645 жыл бұрын
That's a pretty handy idea if you don't want to sew up the upholstery. Thanks for sharing that Lloyd.
@RustyGlovebox
5 жыл бұрын
Thanks Larry, It has several steps but easy overall. Enjoy your week
@oldrover30072 жыл бұрын
Great Video , I just learned how to make pleats on my Model A door panel . Good tip , thanks for posting it !
@RustyGlovebox
2 жыл бұрын
Glad it helped
@805ROADKING5 жыл бұрын
That came out great Bud!! I've never seen it done like that before!!☺
@RustyGlovebox
5 жыл бұрын
Thanks, you could do any type of pattern on the panel . It is a great option for early cars and truck with flat door panels. Have a great week.
@bigwadventures70615 жыл бұрын
That panel looks great. That’s a good process to use without sewing the panels. It’s going to look great in the Car. Thanks for sharing and teaching us something new. Have a great week my friend. BigW:-)
@RustyGlovebox
5 жыл бұрын
Thanks, you could make some custom VW door panel too. Enjoy your week.
@tiborkiss91863 жыл бұрын
you just gave me a good idea! Thank you for sharing.
@RustyGlovebox
3 жыл бұрын
It really looks good. Good luck on your project. Thanks
@MalcOfLincoln5 жыл бұрын
Nice job Lloyd. They turned out well.
@RustyGlovebox
5 жыл бұрын
Thanks Malc, I was looking for an option to taking the door panels to the upholstery shop . This method works great on flat panels.
@txsviking5 жыл бұрын
I never knew how that was done. Cool.
@RustyGlovebox
5 жыл бұрын
I had searched for alternative and came up with this as an option to using an upholstery shop . Thanks Terry and take care
@MissouriOldTimer5 жыл бұрын
that is very spiffy, I must say, you are a very talented fella.
@RustyGlovebox
5 жыл бұрын
Thanks Vernon, I was looking for an option to keep from taking them to the auto upholstery shop.Enjoy your week.
@DriveShaftDrew5 жыл бұрын
thumbs up and shared great job i know i would not have the patience require to do that well done sir
@BubbasgarageTv5 жыл бұрын
Love that layering approach. We have built a few for an old Nissan 4x4 wrapped in Camo great technique and works really well. Great Job!
@RustyGlovebox
5 жыл бұрын
Thanks Bubba, it has gone well and happy how it looks. Enjoy your week.
@marvinlvr2 жыл бұрын
Loved it! Thank you.
@RustyGlovebox
2 жыл бұрын
Thanks for watching. Hope it works for you too.
@countrysmurfcomedy30996 ай бұрын
Great info and Tips 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
@RustyGlovebox
5 ай бұрын
Glad you enjoyed! Thanks
@shawnmrfixitlee64785 жыл бұрын
yur a pro man , Looks AWESOME !.. ENJOYED
@RustyGlovebox
5 жыл бұрын
Thanks Shawn, it came together pretty good. I will be installing them soon. Enjoy your week.
@thomassoltis58625 жыл бұрын
Great job brother keep up the awesome work
@JustPlainCommonSense5 жыл бұрын
Neat trick! Great job and I hope to see it someday. You're right about that spray glue. I've had it fail pretty quickly. Seems it is made to hold things in place long enough for you to put a proper fastener in it but that is about as far as it will go.
@RustyGlovebox
5 жыл бұрын
If vinyl top glue can hold can hold it to the roof of a car it should work good on the door panels. Thanks and have a great week.
@buzzsah5 жыл бұрын
Nice job, neat and clean.
@RustyGlovebox
5 жыл бұрын
Thanks Buzz, it came out nice and now I have to complete the rest.
@1968hambone5 жыл бұрын
This is excellent brotha...it’ll come in handy on my Thing project!
@RustyGlovebox
5 жыл бұрын
VW's are the perfect car for this type of panel upholstery. Good luck on yours
@ceedell5 жыл бұрын
Neat technique Lloyd!
@RustyGlovebox
5 жыл бұрын
Thanks, it is an alternative to having an upholstery shop make them for you.
@rauldeluna6304 жыл бұрын
That was awesome Rusty
@RustyGlovebox
4 жыл бұрын
Thanks, it is holding up well and still looks great .
@TheOpenAirGarage5 жыл бұрын
This was very useful. Will have to borrow this.
@RustyGlovebox
5 жыл бұрын
Thanks Stan, it work good and just takes time . Good luck and enjoy your week.
@snowking555 жыл бұрын
Pretty ingenious Rusty! Those will dress up your Studebaker real nice.
@RustyGlovebox
5 жыл бұрын
Thanks, upholstery can be expensive and this is an option for folks . Take care
@racheltoby96483 жыл бұрын
BEAUTIFUL!!
@RustyGlovebox
3 жыл бұрын
Thank you!!
@RodderFiles5 жыл бұрын
On the money, So many people will benefit from your video , Shared it ;)
@RustyGlovebox
5 жыл бұрын
I hope it will be helpful. There isn't much out there on a good DIY from scratch door panel upholstery that doesn't require sewing. Thanks Ken and take care
@c10etc3 жыл бұрын
Excellent video, I'll be trying it on my ghia.
@RustyGlovebox
3 жыл бұрын
Thanks and good luck on the Ghia
@philipspooner70052 жыл бұрын
Excellent , what a neat trick , this is going to be done on my next project TR6 int thanks
@RustyGlovebox
2 жыл бұрын
Thanks and good luck
@michaelgramby7483 Жыл бұрын
Nice job Rusty
@RustyGlovebox
Жыл бұрын
Glad you like it, Thanks
@tertessa5 жыл бұрын
Thanks for the insight.. very interesting... thanks
@RustyGlovebox
5 жыл бұрын
Just like everything else, it is expensive to have it done . So I went this route. Thanks and enjoy your week
@melchristian36385 жыл бұрын
Hello mr. Rusty's glove box happy Sunday to you sir and to your family may God bless you
@RustyGlovebox
5 жыл бұрын
Thanks Mel, Hope you had a great Sunday as well.
@kyvirlogistics49932 жыл бұрын
Looks good
@RustyGlovebox
2 жыл бұрын
Thanks, it is holding up well too.
@kyvirlogistics4993
2 жыл бұрын
@@RustyGlovebox the fact you’re still replying to comments after all years shows integrity in your work... subscribed 👊🏾 glad to hear it’s still going strong
@jesusnegron26424 жыл бұрын
i liked very much will start doing mine thanks to you..
@RustyGlovebox
4 жыл бұрын
I have been very happy with it and like how it looked. Thanks and good luck on yours.
@RogersFixItBarn5 жыл бұрын
Nice job Lloyd i will have to do that on my 56 f100 when i get to the upholstery job
@RustyGlovebox
5 жыл бұрын
Thanks Roger, that would be the perfect vehicle for this type of upholstery. Good luck and take care
@curtsandvig18023 жыл бұрын
so great!!! thanks!
@RustyGlovebox
3 жыл бұрын
Thanks, glad it helps
@kakarote2277 Жыл бұрын
Great video.
@RustyGlovebox
Жыл бұрын
Thank you very much
@henrygibson15303 жыл бұрын
That's and easy way to do thanks for sharing.
@RustyGlovebox
3 жыл бұрын
Thanks, it has held up well too.
@ramblers695 жыл бұрын
Looks really good Lloyd, :)
@RustyGlovebox
5 жыл бұрын
Thanks Tom, I'm happy how they came out. Enjoy your week.
@MidwestMotoRider5 жыл бұрын
Fantastic looks like a pro did it.
@RustyGlovebox
5 жыл бұрын
Thanks Scott, it makes a nice looking door panel. Lots more options than just pleats though. Enjoy your week
@not2fast4u2c5 жыл бұрын
That was Interesting!
@RustyGlovebox
5 жыл бұрын
Early cars and pickups are a perfect candidate for this type of door panel. Thanks and enjoy your week
@1966scoutcheif5 жыл бұрын
Looks like a good idea.
@RustyGlovebox
5 жыл бұрын
Thanks Eric, I was very happy how well it turned out. Take care
@tyronearmstead75986 ай бұрын
Very nice, thank you
@RustyGlovebox
5 ай бұрын
Thank you , it still looks good
@johnw6498 Жыл бұрын
Slick Idea !
@RustyGlovebox
Жыл бұрын
Thanks , it has held up good with no loose edges.
@scottrussell44885 жыл бұрын
Thanks for the video
@RustyGlovebox
5 жыл бұрын
Thanks and appreciate you watching. Take care
@mrmack44444 жыл бұрын
Very very nice and simple my friend!!
@RustyGlovebox
4 жыл бұрын
Thanks, I have been happy how well it is holding up too.
@mrmack4444
4 жыл бұрын
@@RustyGlovebox I'm sure you are a busy man,but I'm sure KZread would agree, but how about a video showing how to add designs into the pattern?
@DoctorWonka2 жыл бұрын
Very good idea, with a nice final look. Except it does seem more laborious than sewing it (so long as you have the right seeing machine).
@RustyGlovebox
2 жыл бұрын
Very true, I looked for an old upholstery machine but didn't find one in my price range. This has worked good and holding up well. Thanks
@nspacemonkey3 жыл бұрын
Awesome, also can do combinations like diagonal lines, maybe ad some carpet too.
@bigeddie12315 жыл бұрын
awesome video sir
@RustyGlovebox
5 жыл бұрын
Thanks Eddie, I'm happy how they came out.
@anthonychicoine93723 жыл бұрын
AWESOME!
@RustyGlovebox
3 жыл бұрын
Thanks Anthony
@HEARTNHUSTLESTUDIOS3 жыл бұрын
Great job. About to do the interior on 1964 Continental. Wish me luck
@RustyGlovebox
3 жыл бұрын
All the best and good luck
@truenorthliving95575 жыл бұрын
Cool stuff buddy
@RustyGlovebox
5 жыл бұрын
Thanks, the Studebaker interior is almost done.
@WallysPlace665 жыл бұрын
Very nice job
@RustyGlovebox
5 жыл бұрын
Thanks Ron, should complete them today
@Richie54803 жыл бұрын
Harbor freight spray gun, cool 😎.
@RustyGlovebox
3 жыл бұрын
You bet, it worked great spraying the glue. Thanks
@mostlymoparih56825 жыл бұрын
That's pretty cool Lloyd. For the window crank to come through are you going to make a small hole and pull some vinyl through the hole or just cut the hole out.
@RustyGlovebox
5 жыл бұрын
The backer board has a notch in it. And I will use a knife to cut an X for the shaft to pass through in the vinyl. Thanks and take care
@dyingforpie6879 Жыл бұрын
You guys showing all these flat panels- do some radius ones 😁
@RustyGlovebox
Жыл бұрын
There are a lot of options out there and this is just one. Making a custom raised panel using fiberglass resin and a polyester mat can make a cool looking panel for the right vehicle. Thanks
@busman54295 жыл бұрын
Lioyd thanks for sharing On my vw bus the panels for that you can buy from TMI, if you have extra $1,500.00 sitting around collecting dust. For years now on the VW's everyone makes them thier own (crazy things like putting in a V8 motor) they add thier style and vision. After watching this, I see how I can do that with my bus panels May need to call you buddy about how to do it when the time comes to panel it up on my bus ---you have me thinking about the VW emblem may need to practice on that one or BUSMAN54 ??? in the door panels ; you have some big panels on the buses.
@RustyGlovebox
5 жыл бұрын
That sounds great Dan and looking forward to seeing what you design. Sure call anytime. I'm still going to call about the title, just haven't got around to it yet. Thanks Buddy and enjoy your week.
@thomaswebb9705 Жыл бұрын
This is great. The door panels on my TR6 are fine, but the panel that covers the gas tank and separates the trunk from the interior is all warped. It's not worth me buying an entire interior kit for the car so this is the way to go.
@RustyGlovebox
Жыл бұрын
Thanks and good luck on your project
@dbest1aVlogs5 жыл бұрын
Darn that turned out good. I admit at the beginning, I was think wait what are we making. Came out great though..
@RustyGlovebox
5 жыл бұрын
Thanks, the vinyl top glue has a superior hold over some other adhesives is the key . Enjoy your week.
@dbest1aVlogs
5 жыл бұрын
Rusty Glovebox thank you enjoy your week too. Yes that glue looked like serious stuff, especially when you said you didn’t want to put too much on.
@MrGabo00893 жыл бұрын
Excelente trabajo bien ejecutado !!
@RustyGlovebox
3 жыл бұрын
Muchas gracias mi amigo
@swdweeb5 жыл бұрын
Man that looked great. Will you show how to attach the panels as well?
@RustyGlovebox
5 жыл бұрын
I will complete the panels this week and install them . I can show how the attack then. Good question and Thanks Perry
@swdweeb
5 жыл бұрын
Rusty Glovebox cool I heard about a guy with an old mustang he might need to do something similar to ;-)
@mastergreen84924 жыл бұрын
Way Togo Rusty 👍🏽😎
@RustyGlovebox
4 жыл бұрын
Thanks, very happy how well it turned out.
@SteveRobReviews5 жыл бұрын
I had no idea this could be done ✔
@RustyGlovebox
5 жыл бұрын
There is a pieces but none is hard to do. And it delivers a nice result too. Thanks and take care
@StreetRodGuy07 Жыл бұрын
Great video. I have a couple questions. I noticed when you added the second plywood piece; you rolled the edge; but I didn't see where you added any kind of adhesive other than the bottom. Should I assume it is only attached with staples at the bottom and on the back side..?? Also I am curious how you use glue in the spray gun. Does it need to be thinned down or just use it as it comes in the can. Also do you have a video about how to have "holes" in the vinyl for items like armrest or window cranks. Thanks looking forward to a reply. Great video
@RustyGlovebox
Жыл бұрын
Don't need to thin the glue , It sprays out easily using the gun. The bottom panel is held on with glue and staples. The bottom has a line of screws across it. You can get a gasket hole punch on Amazon or Ebay to punch hole in the vinyl.
@royreddick29342 жыл бұрын
Several months ago I bought some hard board like what your using and I made my own door panels I also used 1/4" foam They came out good but now the glue has weakened and my vinyl is coming loose. I used 3M #77 contact cement aerosol can, I will never use that crappy glue again. So I am going to use Weldwood Landau and trim adhesive from now on. Rusty will it hold up to the Texas heat?
@RustyGlovebox
2 жыл бұрын
I live in Texas and it has done good for me. Good luck
@levonhamiltoniii81873 жыл бұрын
I have looked all over for landau foam. What thickness did you use and where did you purchase it ?
@RustyGlovebox
3 жыл бұрын
The foam can be purchased at upholster supply shops. Sometimes called vinyl top foam. 1/8 inch can be found on ebay or amazon also. Good luck
@FarmallFanatic5 жыл бұрын
I need that for a tractor seat lol
@RustyGlovebox
5 жыл бұрын
For a seat I would definitely sew it, but door panel are different. Your tractor have a cab...ha ha, Thanks
@doncase6704 Жыл бұрын
In regards to the spray gun..... can you tell me a little about air pressure? Plus, do you have to strip and clean the gun every night?
@RustyGlovebox
Жыл бұрын
I used a cheap Harbor Freight spray gun cause if it messed up it was no big loss. On air pressure you have to play with pressure and the fan spray you want to get it right, not to hard. The first time I did it I clean it up but the next time I cover the vent and cleaned the tip up and it worked fine the next day. Good luck on your project
@MrSpongie15 жыл бұрын
Well I sure don't think this was your first BBQ... she turned out great Rusty. How long do you have before the glue dry?
@RustyGlovebox
5 жыл бұрын
That glue dries really quick and is very strong too. So this should last a long time. Thanks Spongie and enjoy your week.
@TheShadeTreeFixitMan5 жыл бұрын
NIcely done Lloyd! But now I have a problem, I think I need to upholster the inside of the Goofy Cart! (after I get moved of course...)
@RustyGlovebox
5 жыл бұрын
There you go George , problem solved . This will work great on the Goofy Cart too.
@GDTractor5 жыл бұрын
Is there anything you can't do?????? :) Always a great job !! GD Tractor
@RustyGlovebox
5 жыл бұрын
Thanks Gary, all this cost was the materials to do it and was a real learning experience. Thanks and have a great Memorial Day.
@TubeTerryH Жыл бұрын
Did you foam the bottom piece of plywood?
@RustyGlovebox
Жыл бұрын
No, just the pleated parts. But if your job needs it you could.
@shanedarden3694 жыл бұрын
What did u use for backer boards
@RustyGlovebox
4 жыл бұрын
1/8 plywood and 1/8 Masonite
@kahhao31393 жыл бұрын
May I know Landau foam is this same like the pe foam?
@RustyGlovebox
3 жыл бұрын
The landau foam is for cars with vinyl tops. An upholstery shop would have it or you can get it on eBay or Amazon. PE foam is not the same. Thanks and take care
@fishtheft674 жыл бұрын
Hello , 1/8" plywood , how thick is the landau foam , 1/16" correct ? Because you say after glued & assembled , its 3/16" thick correct ? Awesome video !
@RustyGlovebox
4 жыл бұрын
Yes, you are correct. Thanks
@fishtheft67
4 жыл бұрын
@@RustyGlovebox hello , where did you find 1/16" landau foam , i searched internet & could only find 1/8" , that was the thinest i could find . Do you think i could just wrap 3/16" landau without wood board ? Thanks for your help Sir , I really appreciate it very much !
@RustyGlovebox
4 жыл бұрын
@@fishtheft67 I got mine at our local upholstery shop. They had a role of it. You can use any thickness of foam as long as it is not to thick for your interior door handles to fit properly. It will be hard to get a crisp line on the vinyl without the plywood backer on the foam. Good luck
@ss00733 жыл бұрын
Interesting What are you using as a spray gun?
@RustyGlovebox
3 жыл бұрын
Just a cheap Harbor Freight paint gun. Work out good with no modifications.
@ss0073
3 жыл бұрын
@@RustyGlovebox Enough said! Thank you
@swivelgate2 жыл бұрын
How are you going to attach it to the door ?
@RustyGlovebox
2 жыл бұрын
I used the factory style push fasteners
@RustyGlovebox
2 жыл бұрын
I used the factory style push fasteners
@charlesdyer23765 жыл бұрын
U B A Polster by golly !!!
@RustyGlovebox
5 жыл бұрын
It is stuck on there and came out pretty good. I will complete the others and install them next. Thanks and enjoy your week.
@jessesalomon83588 ай бұрын
How about convertible top motor replacement, and videos.
@RustyGlovebox
8 ай бұрын
I replaced a control module on a Chevy SSR Top but no motor repairs on a standard conv. tops. Good luck
@jiminohio7253 Жыл бұрын
A ton of work to not have to sew
@RustyGlovebox
Жыл бұрын
Thanks and I agree, might be something to try on a small project.
@cheekydan45923 жыл бұрын
Where to buy materials
@RustyGlovebox
3 жыл бұрын
Local upholstery shop can supply most of the parts
@cheekydan4592
3 жыл бұрын
@@RustyGlovebox thank you. It’s been hard to finish but I’ll keep looking
Пікірлер: 187
Nice to see all positive comments and surprising there are no haters complaining about something.
@RustyGlovebox
3 жыл бұрын
Thanks for stopping by and checking it out.
Lloyd you're top of the pops when it comes to DIY.
@RustyGlovebox
5 жыл бұрын
Thanks Noel, I like trying my hand at many different projects. Have a great week.
Hi Lloyd! I found your video particularly interesting because I've been thinking about trying to make new door panels for my 1981 VW Rabbit pickup. Congratulations on winning a poem book! Thank you for the video. Take care.
@RustyGlovebox
5 жыл бұрын
Thanks Todd, it is a great alternative for the Do-it-yourselfer. Thanks for the poetry book , looking forward to it. Enjoy your week.
Thanks Lloyd learn something new every day. The door panel turned our real nice and white has got to be difficult to keep white when playing with glue.!!... great job.!!
@RustyGlovebox
5 жыл бұрын
It wasn't impossible but you have to be a little careful. Thanks Pappy and take care
This is terrific! I can sew but don't have a machine for heavy duty material so this is a great alternative. I love this idea and may do some custom door panels on my restoration projects
@RustyGlovebox
2 жыл бұрын
Thanks, I was happy how easy it goes together after collecting all the parts .
Neat to see all the pieces come together.
@RustyGlovebox
5 жыл бұрын
Thanks, getting to see all the parts come together make the work worth while. Enjoy your week
Excellent work my friend!!! Will come in handy for the 39!!! Keep Rocking it out Lloyd!!!
@RustyGlovebox
5 жыл бұрын
Any model vehicle with flat door panels and it would be great for. Thanks Pat and Good luck.
Nice job Lloyd . Thanks for sharing. Joe
@RustyGlovebox
5 жыл бұрын
Thanks Joe, I was pleased how the panels came out and they look good installed too. Enjoy your week.
Great video, thanks for sharing. I have never seen this technique before and it came out great. Good job
@RustyGlovebox
5 жыл бұрын
Thanks, it is going to work great for the Studebaker interior. Take care
That was really nice my Friend, great job, for some reason I missed this video
Great work. I'm sure to try this. God bless
Great video. Thanks for posting, you have solved the interior build issue on my 29 Model A p/u.
@RustyGlovebox
3 жыл бұрын
Glad it helped
That's a pretty handy idea if you don't want to sew up the upholstery. Thanks for sharing that Lloyd.
@RustyGlovebox
5 жыл бұрын
Thanks Larry, It has several steps but easy overall. Enjoy your week
Great Video , I just learned how to make pleats on my Model A door panel . Good tip , thanks for posting it !
@RustyGlovebox
2 жыл бұрын
Glad it helped
That came out great Bud!! I've never seen it done like that before!!☺
@RustyGlovebox
5 жыл бұрын
Thanks, you could do any type of pattern on the panel . It is a great option for early cars and truck with flat door panels. Have a great week.
That panel looks great. That’s a good process to use without sewing the panels. It’s going to look great in the Car. Thanks for sharing and teaching us something new. Have a great week my friend. BigW:-)
@RustyGlovebox
5 жыл бұрын
Thanks, you could make some custom VW door panel too. Enjoy your week.
you just gave me a good idea! Thank you for sharing.
@RustyGlovebox
3 жыл бұрын
It really looks good. Good luck on your project. Thanks
Nice job Lloyd. They turned out well.
@RustyGlovebox
5 жыл бұрын
Thanks Malc, I was looking for an option to taking the door panels to the upholstery shop . This method works great on flat panels.
I never knew how that was done. Cool.
@RustyGlovebox
5 жыл бұрын
I had searched for alternative and came up with this as an option to using an upholstery shop . Thanks Terry and take care
that is very spiffy, I must say, you are a very talented fella.
@RustyGlovebox
5 жыл бұрын
Thanks Vernon, I was looking for an option to keep from taking them to the auto upholstery shop.Enjoy your week.
thumbs up and shared great job i know i would not have the patience require to do that well done sir
Love that layering approach. We have built a few for an old Nissan 4x4 wrapped in Camo great technique and works really well. Great Job!
@RustyGlovebox
5 жыл бұрын
Thanks Bubba, it has gone well and happy how it looks. Enjoy your week.
Loved it! Thank you.
@RustyGlovebox
2 жыл бұрын
Thanks for watching. Hope it works for you too.
Great info and Tips 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
@RustyGlovebox
5 ай бұрын
Glad you enjoyed! Thanks
yur a pro man , Looks AWESOME !.. ENJOYED
@RustyGlovebox
5 жыл бұрын
Thanks Shawn, it came together pretty good. I will be installing them soon. Enjoy your week.
Great job brother keep up the awesome work
Neat trick! Great job and I hope to see it someday. You're right about that spray glue. I've had it fail pretty quickly. Seems it is made to hold things in place long enough for you to put a proper fastener in it but that is about as far as it will go.
@RustyGlovebox
5 жыл бұрын
If vinyl top glue can hold can hold it to the roof of a car it should work good on the door panels. Thanks and have a great week.
Nice job, neat and clean.
@RustyGlovebox
5 жыл бұрын
Thanks Buzz, it came out nice and now I have to complete the rest.
This is excellent brotha...it’ll come in handy on my Thing project!
@RustyGlovebox
5 жыл бұрын
VW's are the perfect car for this type of panel upholstery. Good luck on yours
Neat technique Lloyd!
@RustyGlovebox
5 жыл бұрын
Thanks, it is an alternative to having an upholstery shop make them for you.
That was awesome Rusty
@RustyGlovebox
4 жыл бұрын
Thanks, it is holding up well and still looks great .
This was very useful. Will have to borrow this.
@RustyGlovebox
5 жыл бұрын
Thanks Stan, it work good and just takes time . Good luck and enjoy your week.
Pretty ingenious Rusty! Those will dress up your Studebaker real nice.
@RustyGlovebox
5 жыл бұрын
Thanks, upholstery can be expensive and this is an option for folks . Take care
BEAUTIFUL!!
@RustyGlovebox
3 жыл бұрын
Thank you!!
On the money, So many people will benefit from your video , Shared it ;)
@RustyGlovebox
5 жыл бұрын
I hope it will be helpful. There isn't much out there on a good DIY from scratch door panel upholstery that doesn't require sewing. Thanks Ken and take care
Excellent video, I'll be trying it on my ghia.
@RustyGlovebox
3 жыл бұрын
Thanks and good luck on the Ghia
Excellent , what a neat trick , this is going to be done on my next project TR6 int thanks
@RustyGlovebox
2 жыл бұрын
Thanks and good luck
Nice job Rusty
@RustyGlovebox
Жыл бұрын
Glad you like it, Thanks
Thanks for the insight.. very interesting... thanks
@RustyGlovebox
5 жыл бұрын
Just like everything else, it is expensive to have it done . So I went this route. Thanks and enjoy your week
Hello mr. Rusty's glove box happy Sunday to you sir and to your family may God bless you
@RustyGlovebox
5 жыл бұрын
Thanks Mel, Hope you had a great Sunday as well.
Looks good
@RustyGlovebox
2 жыл бұрын
Thanks, it is holding up well too.
@kyvirlogistics4993
2 жыл бұрын
@@RustyGlovebox the fact you’re still replying to comments after all years shows integrity in your work... subscribed 👊🏾 glad to hear it’s still going strong
i liked very much will start doing mine thanks to you..
@RustyGlovebox
4 жыл бұрын
I have been very happy with it and like how it looked. Thanks and good luck on yours.
Nice job Lloyd i will have to do that on my 56 f100 when i get to the upholstery job
@RustyGlovebox
5 жыл бұрын
Thanks Roger, that would be the perfect vehicle for this type of upholstery. Good luck and take care
so great!!! thanks!
@RustyGlovebox
3 жыл бұрын
Thanks, glad it helps
Great video.
@RustyGlovebox
Жыл бұрын
Thank you very much
That's and easy way to do thanks for sharing.
@RustyGlovebox
3 жыл бұрын
Thanks, it has held up well too.
Looks really good Lloyd, :)
@RustyGlovebox
5 жыл бұрын
Thanks Tom, I'm happy how they came out. Enjoy your week.
Fantastic looks like a pro did it.
@RustyGlovebox
5 жыл бұрын
Thanks Scott, it makes a nice looking door panel. Lots more options than just pleats though. Enjoy your week
That was Interesting!
@RustyGlovebox
5 жыл бұрын
Early cars and pickups are a perfect candidate for this type of door panel. Thanks and enjoy your week
Looks like a good idea.
@RustyGlovebox
5 жыл бұрын
Thanks Eric, I was very happy how well it turned out. Take care
Very nice, thank you
@RustyGlovebox
5 ай бұрын
Thank you , it still looks good
Slick Idea !
@RustyGlovebox
Жыл бұрын
Thanks , it has held up good with no loose edges.
Thanks for the video
@RustyGlovebox
5 жыл бұрын
Thanks and appreciate you watching. Take care
Very very nice and simple my friend!!
@RustyGlovebox
4 жыл бұрын
Thanks, I have been happy how well it is holding up too.
@mrmack4444
4 жыл бұрын
@@RustyGlovebox I'm sure you are a busy man,but I'm sure KZread would agree, but how about a video showing how to add designs into the pattern?
Very good idea, with a nice final look. Except it does seem more laborious than sewing it (so long as you have the right seeing machine).
@RustyGlovebox
2 жыл бұрын
Very true, I looked for an old upholstery machine but didn't find one in my price range. This has worked good and holding up well. Thanks
Awesome, also can do combinations like diagonal lines, maybe ad some carpet too.
awesome video sir
@RustyGlovebox
5 жыл бұрын
Thanks Eddie, I'm happy how they came out.
AWESOME!
@RustyGlovebox
3 жыл бұрын
Thanks Anthony
Great job. About to do the interior on 1964 Continental. Wish me luck
@RustyGlovebox
3 жыл бұрын
All the best and good luck
Cool stuff buddy
@RustyGlovebox
5 жыл бұрын
Thanks, the Studebaker interior is almost done.
Very nice job
@RustyGlovebox
5 жыл бұрын
Thanks Ron, should complete them today
Harbor freight spray gun, cool 😎.
@RustyGlovebox
3 жыл бұрын
You bet, it worked great spraying the glue. Thanks
That's pretty cool Lloyd. For the window crank to come through are you going to make a small hole and pull some vinyl through the hole or just cut the hole out.
@RustyGlovebox
5 жыл бұрын
The backer board has a notch in it. And I will use a knife to cut an X for the shaft to pass through in the vinyl. Thanks and take care
You guys showing all these flat panels- do some radius ones 😁
@RustyGlovebox
Жыл бұрын
There are a lot of options out there and this is just one. Making a custom raised panel using fiberglass resin and a polyester mat can make a cool looking panel for the right vehicle. Thanks
Lioyd thanks for sharing On my vw bus the panels for that you can buy from TMI, if you have extra $1,500.00 sitting around collecting dust. For years now on the VW's everyone makes them thier own (crazy things like putting in a V8 motor) they add thier style and vision. After watching this, I see how I can do that with my bus panels May need to call you buddy about how to do it when the time comes to panel it up on my bus ---you have me thinking about the VW emblem may need to practice on that one or BUSMAN54 ??? in the door panels ; you have some big panels on the buses.
@RustyGlovebox
5 жыл бұрын
That sounds great Dan and looking forward to seeing what you design. Sure call anytime. I'm still going to call about the title, just haven't got around to it yet. Thanks Buddy and enjoy your week.
This is great. The door panels on my TR6 are fine, but the panel that covers the gas tank and separates the trunk from the interior is all warped. It's not worth me buying an entire interior kit for the car so this is the way to go.
@RustyGlovebox
Жыл бұрын
Thanks and good luck on your project
Darn that turned out good. I admit at the beginning, I was think wait what are we making. Came out great though..
@RustyGlovebox
5 жыл бұрын
Thanks, the vinyl top glue has a superior hold over some other adhesives is the key . Enjoy your week.
@dbest1aVlogs
5 жыл бұрын
Rusty Glovebox thank you enjoy your week too. Yes that glue looked like serious stuff, especially when you said you didn’t want to put too much on.
Excelente trabajo bien ejecutado !!
@RustyGlovebox
3 жыл бұрын
Muchas gracias mi amigo
Man that looked great. Will you show how to attach the panels as well?
@RustyGlovebox
5 жыл бұрын
I will complete the panels this week and install them . I can show how the attack then. Good question and Thanks Perry
@swdweeb
5 жыл бұрын
Rusty Glovebox cool I heard about a guy with an old mustang he might need to do something similar to ;-)
Way Togo Rusty 👍🏽😎
@RustyGlovebox
4 жыл бұрын
Thanks, very happy how well it turned out.
I had no idea this could be done ✔
@RustyGlovebox
5 жыл бұрын
There is a pieces but none is hard to do. And it delivers a nice result too. Thanks and take care
Great video. I have a couple questions. I noticed when you added the second plywood piece; you rolled the edge; but I didn't see where you added any kind of adhesive other than the bottom. Should I assume it is only attached with staples at the bottom and on the back side..?? Also I am curious how you use glue in the spray gun. Does it need to be thinned down or just use it as it comes in the can. Also do you have a video about how to have "holes" in the vinyl for items like armrest or window cranks. Thanks looking forward to a reply. Great video
@RustyGlovebox
Жыл бұрын
Don't need to thin the glue , It sprays out easily using the gun. The bottom panel is held on with glue and staples. The bottom has a line of screws across it. You can get a gasket hole punch on Amazon or Ebay to punch hole in the vinyl.
Several months ago I bought some hard board like what your using and I made my own door panels I also used 1/4" foam They came out good but now the glue has weakened and my vinyl is coming loose. I used 3M #77 contact cement aerosol can, I will never use that crappy glue again. So I am going to use Weldwood Landau and trim adhesive from now on. Rusty will it hold up to the Texas heat?
@RustyGlovebox
2 жыл бұрын
I live in Texas and it has done good for me. Good luck
I have looked all over for landau foam. What thickness did you use and where did you purchase it ?
@RustyGlovebox
3 жыл бұрын
The foam can be purchased at upholster supply shops. Sometimes called vinyl top foam. 1/8 inch can be found on ebay or amazon also. Good luck
I need that for a tractor seat lol
@RustyGlovebox
5 жыл бұрын
For a seat I would definitely sew it, but door panel are different. Your tractor have a cab...ha ha, Thanks
In regards to the spray gun..... can you tell me a little about air pressure? Plus, do you have to strip and clean the gun every night?
@RustyGlovebox
Жыл бұрын
I used a cheap Harbor Freight spray gun cause if it messed up it was no big loss. On air pressure you have to play with pressure and the fan spray you want to get it right, not to hard. The first time I did it I clean it up but the next time I cover the vent and cleaned the tip up and it worked fine the next day. Good luck on your project
Well I sure don't think this was your first BBQ... she turned out great Rusty. How long do you have before the glue dry?
@RustyGlovebox
5 жыл бұрын
That glue dries really quick and is very strong too. So this should last a long time. Thanks Spongie and enjoy your week.
NIcely done Lloyd! But now I have a problem, I think I need to upholster the inside of the Goofy Cart! (after I get moved of course...)
@RustyGlovebox
5 жыл бұрын
There you go George , problem solved . This will work great on the Goofy Cart too.
Is there anything you can't do?????? :) Always a great job !! GD Tractor
@RustyGlovebox
5 жыл бұрын
Thanks Gary, all this cost was the materials to do it and was a real learning experience. Thanks and have a great Memorial Day.
Did you foam the bottom piece of plywood?
@RustyGlovebox
Жыл бұрын
No, just the pleated parts. But if your job needs it you could.
What did u use for backer boards
@RustyGlovebox
4 жыл бұрын
1/8 plywood and 1/8 Masonite
May I know Landau foam is this same like the pe foam?
@RustyGlovebox
3 жыл бұрын
The landau foam is for cars with vinyl tops. An upholstery shop would have it or you can get it on eBay or Amazon. PE foam is not the same. Thanks and take care
Hello , 1/8" plywood , how thick is the landau foam , 1/16" correct ? Because you say after glued & assembled , its 3/16" thick correct ? Awesome video !
@RustyGlovebox
4 жыл бұрын
Yes, you are correct. Thanks
@fishtheft67
4 жыл бұрын
@@RustyGlovebox hello , where did you find 1/16" landau foam , i searched internet & could only find 1/8" , that was the thinest i could find . Do you think i could just wrap 3/16" landau without wood board ? Thanks for your help Sir , I really appreciate it very much !
@RustyGlovebox
4 жыл бұрын
@@fishtheft67 I got mine at our local upholstery shop. They had a role of it. You can use any thickness of foam as long as it is not to thick for your interior door handles to fit properly. It will be hard to get a crisp line on the vinyl without the plywood backer on the foam. Good luck
Interesting What are you using as a spray gun?
@RustyGlovebox
3 жыл бұрын
Just a cheap Harbor Freight paint gun. Work out good with no modifications.
@ss0073
3 жыл бұрын
@@RustyGlovebox Enough said! Thank you
How are you going to attach it to the door ?
@RustyGlovebox
2 жыл бұрын
I used the factory style push fasteners
@RustyGlovebox
2 жыл бұрын
I used the factory style push fasteners
U B A Polster by golly !!!
@RustyGlovebox
5 жыл бұрын
It is stuck on there and came out pretty good. I will complete the others and install them next. Thanks and enjoy your week.
How about convertible top motor replacement, and videos.
@RustyGlovebox
8 ай бұрын
I replaced a control module on a Chevy SSR Top but no motor repairs on a standard conv. tops. Good luck
A ton of work to not have to sew
@RustyGlovebox
Жыл бұрын
Thanks and I agree, might be something to try on a small project.
Where to buy materials
@RustyGlovebox
3 жыл бұрын
Local upholstery shop can supply most of the parts
@cheekydan4592
3 жыл бұрын
@@RustyGlovebox thank you. It’s been hard to finish but I’ll keep looking