🚨PARTS I USED Bearings 99502H (no clip) : amzn.to/2mTFFgB No Mar Removal Ends: amzn.to/2mTIsWP Plastic protection for install (better than milk jugs): amzn.to/2oYIORA Tire LUBE is a MUST: amzn.to/2m8tSL7 Basic Manual Tire Changer Machine: amzn.to/2mLAiVu Saw I used to cut the steel Evolution Evo 380: amzn.to/2lOGxBZ 4 foot 3/4 black gas pipe from the Home Depot/Lowes 5/8" bolt and nut for bearings For the mounting end I used 3/16" steel 4"x4" angle iron cut to 2" wide. I cut the short end to around 1" and left the other at 4". You don't need angle iron and could just bend or cut/weld an angle piece together. 1/8" material is too thin and I would use 3/16" or 1/4" material. Bearings are 1/8" back from the face of the HDPE plastic. The plastic is around 1/4" thick so the bearings are around 3/8" from the inside of the angle iron. You can go to my Facebook page listed below for close up pictures. If you bought everything this would cost you around $25 with a spare $10 tip. To see more detailed photos Go to my Facebook Page: facebook.com/sixtyfiveford/posts/pfbid0sBRiNgNn5maGLnmvuf7fRcErhwpkjekEHo5YaoY3TXiY2WRMiWTSu1sS7F6GgBNVl

If you don’t want to spend time sandwiching layers of milk jugs you can always buy the dirt cheap HDPE cutting boards at the dollar store. Cut to size and bolt on.

Mate, thanks for doing this mod as I was worried about scratching the mags on my wife’s car! I’d never live it down! Kudos to you from Australia!

Boy, that's works smooth. It looks like it cuts down 50% of the resistance! Great idea and great job!

@sixtyfiveford

5 жыл бұрын

Thanks, It makes it a fair amount easier for sure.

After trying different DIY tire changing bars for motorcycle tires, tubed and tubeless, I came across your version of the mojolever. Without question, this is the best solution and much cheaper than a mojolever. I love the bearings. Thanks for sharing your design. I have changed four tires so far and the bar works great. The Nomar end is OK but the link you provided is for the mounting end of the Nomar bar. I cut a couple of flats on the tip so it is narrower the get it between the tire and rim. Insert, rotate the bar 90 degrees and it works the same.

love the bearing

@sixtyfiveford

7 жыл бұрын

Thanks.

I appreciate your ingenuity! I have a manual tire changer coming in the mail soon and definitely don't want to mar up the wheels for my drift car. Thanks for sharing the idea/ knowledge! Great design!

@sixtyfiveford

7 жыл бұрын

Thanks.

sff, great video as always. I wish i had even one percent of your ingenuity and ability. so please,never stop making videos. at least i can watch as good as you. lol.

@sixtyfiveford

7 жыл бұрын

Keep watching and won't stop!

That bearing made that look pretty slick, great idea!

@sixtyfiveford

7 жыл бұрын

Thanks. I seams to work very well.

Very clever implementation. No unnecessary music. Simple explanations where useful. I reckon I can make one ( including the support, in the time i'll save on its first use. A brilliant video, thank you.

@sixtyfiveford

4 жыл бұрын

Thanks, I'm glad you liked it.

That is awesome. I ended up wrapping the stock bar in kydex. It works but not the best fit. Definitely building one of your bars now.

You're a super smart fabricator sir and I enjoyed watching you work and make your materials work for you. Keep it up.

@sixtyfiveford

4 жыл бұрын

Awesome, I'm glad you liked it.

Another great tip! Thanks! Love the red paint detail! A man after my own heart.

@sixtyfiveford

7 жыл бұрын

Thanks, it's been working very well.

Well done, a masterpiece. I would make a display case for this and hang it on the wall for those Special Occasions.

Man, you have a great channel. Your practical builds and tips are money and time savers.

@sixtyfiveford

7 жыл бұрын

Thanks Ken. -Moe

I boght this today and I bent the bar on my first tire but I ended up fishing 8 rim tire swap doesn't have much life left I will probably do what you did thanks for the great video

Had to give a like purely for the 2 axis vice which I'd never seen before but is now on my list of must have tools and also for the melting of the HDPE. I'd never seen how easy it was to use that. I have all sorts of things that I could do with that.

That is excellent work! Very well done. Thanks for the video.

@sixtyfiveford

7 жыл бұрын

Thanks.

This is awesome. Love my manual tire changer.

@sixtyfiveford

7 жыл бұрын

Thanks.

Good work thumbs up. Most likely been patented by now. I invented the Wheelbarrow with a break. But some years later another person somewhere in USA put patent on it. I still have early documentation showing I was the inventor.

nice job, true craftsman, I love to watch these videos, it amazes me how many smart and creative people are out there

@sixtyfiveford

6 жыл бұрын

Thanks, I'm glad you liked it.

Holy schnikes Batman you've outdone yourself. I have the same tire changer and this is just off the hook good. Thanks Bud.

@sixtyfiveford

7 жыл бұрын

I've been wanting to build this for a few years now. I'm glad I did.

Nice job. That tool will pay for itself after one dismount and mount.

@sixtyfiveford

7 жыл бұрын

This tire machine has saved me a lot of money.

Thank you for your trick and your experience ! Good vidéo!

Masterful engineering Moe!

@sixtyfiveford

7 жыл бұрын

Thanks.

You are a freaking genius. now I don’t have to scrap my tire changer

@sixtyfiveford

3 жыл бұрын

Thanks, I'm glad you liked it.

Great job ! 👍🏻

Now! That's a definite thumbs up from me! Great work and Thanks for the video.

@sixtyfiveford

6 жыл бұрын

Thanks Man.

That's very clever, I got some new hard rubber cruiser motorcycle tires, might have to build one myself. Thanks!

@sixtyfiveford

7 жыл бұрын

I've done a few tires now and I'm really enjoying it.

Good idea. That look like it worked pretty good. I liked your oven trick!

@sixtyfiveford

7 жыл бұрын

Hey Thanks.

Just found your channel several days ago..... Jeez, you're like a modern day- Blacksmith of Royalty (the King's Blacksmith)

Nice! My dad was a lot like you in this regard. I learned that, Necessity breeds ingenuity. We were in the sticks and not a lot of money. So we came up with things like an air compressor from an electric appliance motor and an old ac car compressor on a tank, bench grinder was an electric appliance motor, parts washer etc. Most impressive to me was a sandblasting box from parts. He used a pair of welding gloves sewn to Levi Jeans leg's , and glass from something(maybe plexiglass) as the lid. Get this, his buddy took a VW boxer type engine and made an air compressor for his large garage. Thing is it ran on 2 cylinders and pumped air with the other two?! If my memory serves me correctly. Same guy made a front wheel drive rollback with a front wheel drive Cadillac, truck cab and trailer?! Dude was very intelligent.

@billsmith7673

3 жыл бұрын

Damn smart people!

@kentuckywindage222

3 жыл бұрын

@@billsmith7673 Yep. What most folks called junk or a junk pile was a Hardware store. Didn't have a cellar to store potatoes? We dug a big hole about 2 foot deep 5 or 6 foot diameter. Place plastic in bottom with some straw. Start piling potatoes into a peak. Flip the excess plastic over the top and place more straw, then soil until covered. Sometimes another cover or straw. Always plastic over outside with rocks at bottom to hold it in place. Now when cold sets in with snow, go out with a bucket, knife and hoe or spade. Lift up covering dig and cut in. Get potatoes in your bucket cover back and repeat when necessary. Even pull cabbage and put the head down into the ground roots up. When you need it pull it up. Things that most take for granted going to the grocery store to get. It was always be prepared. Watch what animals do. Of course you have the lazy in those also. If you truly want to live off of your land!? Be prepared to work and think on your feet!

@billsmith7673

3 жыл бұрын

@@kentuckywindage222 I am really interested in stuff like that. It's good to have that kind of skill, knowledge, & ability. Most of society is concentrated in city areas now and is completely dependent on Walmart, grocery stores, etc. Most people know nothing about how to provide their own food, repair stuff, make stuff, etc. If society ever collapses or the trucks stop running, those people will be in trouble.

@kentuckywindage222

3 жыл бұрын

@@billsmith7673 I was raised in the outdoors. Hunting and trapping for food, fur, herbs to eat and sale. Trapping and skinning for fur to sell. A garden was a common part of living. We would can food. Also made driers from glass, wood and screen. Mostly to dry apples. Leather breeches were green beans on a string hung usually on a porch until dried out. Pickled corn was one of my favorites my mother would can. Elder berry jam (wine by some). Poke was a green. You only ate the young tender tips. Tastes and looks like canned spinach when cooked, but it can be fried. Lambs quarter. We would gather black walnuts let the husk dry in the gravel drive to remove it. Then sit and crack them so mom could make homemade chocolate fudge with walnuts. I have a saying, Poor boy's have poor boy ways. We were poor but so was most everyone else. Some more so than others. People were different. For example, if someone were building a pole barn? There might be 5 neighbors show up to help. Just feed them when you eat. Nothing else asked of you. We've allowed the people not like those from that time to get control of to many aspects of this country today. I just don't understand how responsibility has been thrown out the window. The old timers wouldn't have had time for such nonsense. Nothing wrong with helping each other. There is however a responsibility each of us has to somewhat take care of ourselves and loved ones.

Cutting board is what I used for plastic part, that bearings are great idea! Cheers

@sixtyfiveford

5 жыл бұрын

Awesome.

Seems like a great idea, simple but effective.

Yes I need to make one

The mounting end is awesome! Works great. The demount struggles with trailer tires and straight up fails with anything larger. My truck tire ripped that little Nomar tip right out.

this is the BEST video I've seen because it uses the bearings and plastic creatively to avoid rim damage and make the job easier. Plus you have some fun machining and welding too!!!! I wonder if there is a good no-scuff dismounter rod/ball.

@sixtyfiveford

3 жыл бұрын

Awesome, I'm glad you liked it. The black plastic end works great as the dismounter.

Nice work. That's super handy

@sixtyfiveford

7 жыл бұрын

Thanks.

Love the vid and ingenuity. You can also always source Delrin (super strong slick plastic) from Mcmaster-carr. It comes in sheets rods etc. Same material as the no mar end you used.

Thank you!!! I was wondering what plastic to use😎😎

I saw you grab that angle iron after you cut it. Cool to the touch. I recently got a similar low speed chop saw. I bet nobody caught that grab of a cool piece LOL. ....and thanks a million for the Idea. I wish I had your brains.

@sixtyfiveford

5 жыл бұрын

Thanks, I'm glad you liked it. Yeah, the dry/cold cut saw is amazing.

Damn!! Now this is useful, great homemade tool. Going to make one.

nice build. thanks for sharing.

@sixtyfiveford

7 жыл бұрын

Thanks. It's been working out very well.

Great DIY video! Just what I needed, making one soon! Just bought the same tire changer at Harbor Freight for $32+tax with a 20% off coupon.

@sixtyfiveford

3 жыл бұрын

That is awesome!

Fantastic. Really nice job on that one.

@sixtyfiveford

7 жыл бұрын

Hey Thanks.

Nice mojo. Good ideas. Bearings are great. Works. And you actual know how. It shows. A+

@sixtyfiveford

3 жыл бұрын

Hey Thanks, I'm glad you liked it.

pretty cool, I was gonna try and buy one, shoot Ill just make it. Appreciate you list out the parts, totally cool, Nice video!

@sixtyfiveford

6 жыл бұрын

Thanks, I'm glad you liked it. It's been working out fantastic.

Kickass ....look great man!

You've got skilz my man!

Another well done job Moe! Enjoyed it as always! Zip~

@sixtyfiveford

7 жыл бұрын

Thanks Zippo.

Excellent video. Thanks for sharing.

@sixtyfiveford

4 жыл бұрын

Thanks, I'm glad you liked it.

Good modifications thumbs up!

@sixtyfiveford

6 жыл бұрын

Thanks, it's been working out very well.

dang! another channel I have to study, haha...God bless...doug

Very helpfull video. Thank you and have a great weekend!

@sixtyfiveford

7 жыл бұрын

Thanks Peter. -Moe

Helló! Megcsináltam és remekül működik. Jó kis szerszám :) Köszönöm az ötletet :)

The Yellowthing tire tool could help you hold the tire lip down when mounting the tire. There are similar things like that, as well.

thanks for the video bro. watching from the Philippines

@sixtyfiveford

4 жыл бұрын

Thanks for watching!

Very clever idea. Thank you

@sixtyfiveford

7 жыл бұрын

Hey Thanks.

Thank you so much for your great details video

@sixtyfiveford

6 жыл бұрын

Thanks, I'm glad you liked it.

Have to replace the tire on my 1998 Manco terminator Gokart. This a great informational video.

@sixtyfiveford

4 жыл бұрын

Manco made some great gokarts. I have 2 Dingos.

@nighthawkj30A4

4 жыл бұрын

sixtyfiveford to bad we will never see the brand come back I guess it was a 1990’s thing. But it great to have piece of fun and inexpensive offroad vehicle history.

Great idea! Thanks for the vid.

you can get what's known as an alloy mate bar which has been out for a long time, which uses nylon bolted to a metal bar, you can buy the nylon kit cheap then just make the bar up easy enough, very handy.

Great tool, thanks for sharing 👍👍

@sixtyfiveford

6 жыл бұрын

Thanks, it has come in handy quit a few times now.

Great job. Thank you

i'm a cheap bastard, so i made my own tire changer out of scrap steel i had lying around to save the 50 bucks. i've got an old solid axle shaft out of who knows what, that my dad used as a spud bar on the farm that's about 4' long that i am going to make the bar tool from. where the tool meets the rubber was where i was having some issue in my design. this solves my problem perfectly. thanx for the idea!

@sixtyfiveford

3 жыл бұрын

Awesome. This thing has made tire changing so much better. Especially for those rims you don't want scratched.

That is an outstanding idea. very good job. Apply for a patent and make your millions. I will be the first to buy one.

@sixtyfiveford

7 жыл бұрын

Thanks, I'm glad you like it.

Genius idea...Thank You

@sixtyfiveford

5 жыл бұрын

Thanks, I'm glad you liked it.

You should have been the one designing this machine great job!!!

@sixtyfiveford

5 жыл бұрын

Thanks, I'm glad you liked it.

Jag håller helt med!!!. Ett xy bord är helt underbart!!!!!!!!!

Great Video Man.

Muito bom vou tentar fazer uma espátula pra mim valeu

Nice build my first tire fixes were big tractor tires years later cars and trucks tires seemed to be built with magnets finding evry nail or. Screw ,it. Was actually easier to fix the big tractor tires , so l found a. Used. Coats 2020. For 250.00. So. Much better on those old hard. Ones. Thanks again

@sixtyfiveford

3 ай бұрын

I've eyeballed those coats machines many many times. One day

I had seen something similar to this being sold online for doing hot rod tires without scratching the rims. Seems like this would do the trick and probably cheaper or at least funner than buying the online one.

great idea , thanks for sharing

@sixtyfiveford

5 жыл бұрын

Thanks, I'm glad you liked it.

Nice job.

Now you done it. Now I'm gonna have to make my own.

@sixtyfiveford

6 жыл бұрын

I've really been enjoying this tool. Thanks Man! I'm glad you liked it.

@allenmckinney9533

6 жыл бұрын

sixtyfiveford what method did you use to melt the plastic? Is it just flat pieces of milk jug stacked together?

Thanks for the video. I've been looking for ideas for something exactly like this or modding the original bar. If I only had the tools to do this, I would basically copy this idea. Since I don't, I will probably buy the MOJO or that other no mar tire tool. Thanks again.

@sixtyfiveford

7 жыл бұрын

The Mogolever looks like a nice tool. I think the No Mar would be difficult to use.

Great video. I was thinking about building something similar myself. The bearing is very clever, and the technique to melt the HDPE into "putty" is a really neat trick.

@sixtyfiveford

7 жыл бұрын

Thanks. I played around with it on a few tires and it worked nicely. I have some larger mudder tires I'm putting on in a few days that'll put it to the test.

@dtrrtd774

7 жыл бұрын

How durable is the melted milk container plastic? I wonder if it could actually be used to put a protective skin around the Harbor Freight mounting bar end to minimize scratching. If it could be heated up enough to be a real liquid, maybe it would be possible to dip it in, candy apple style-

@sixtyfiveford

7 жыл бұрын

I made condoms from my HF tire changer a year or so ago out of PVC. They were too brittle and would crack under the force. You could potentially do it with the HDPE plastic(milk jug, 5 gallon buckets etc) as it is far less brittle. But it doesn't ever turn to a liquid, more like a thick putty, when heated. So you could hand mold it around.

@dtrrtd774

7 жыл бұрын

I might give that a try just to see- I got plenty of old milk cartons saved up! The stuff is fairly slippery, just so long as it doesn't rub right off on the first shot..

@shirleyabston8651

6 жыл бұрын

sixtyfiveford inb

Very clever, good job!

@sixtyfiveford

7 жыл бұрын

Thanks.

GOOD JOB !!!!!, ALWAYS LIKE AND APPRECIATE VERY MUCH THE EFFORT AND PRESENTATIONS YOU MAKE. REGARDS

@sixtyfiveford

7 жыл бұрын

Thanks.

Well THATS a real good idea!

great modification and sweet ending too

@sixtyfiveford

7 жыл бұрын

Thanks Man.

I made a tier changer similar to a rim clamp but just has a hydraulic cilinder to clamp the wheel down in a metal box I welded a large gear to the cilinder and use a eletric motor to turn it on a petal swich used for a drive by wire system for a car I maid the arm out of a square and a circle pipe with a lever to lock the jig in place the only part I have bought was the duck hed and the bar

oh no! the chinese manufacturers are watching this man's creative idea to replicate it and make an easy buck, with no effort, like they've been doing the last 30 years. Hats off to this guy! 👍

Nice video great design I’m hooked and subscribed 😁👍

@sixtyfiveford

6 жыл бұрын

Thanks, I'm glad you liked it and thanks for the Sub. -Moe

Good job. Well done mate

@sixtyfiveford

7 жыл бұрын

Thanks.

Greta humilde man! Thanks for sharing.

@sixtyfiveford

5 жыл бұрын

Thanks, I'm glad you liked it.

あなたのアイデアは素晴らしい！ 私も真似して製作します。

Another’65 masterpiece

@sixtyfiveford

3 жыл бұрын

Hey Thanks, I'm glad you liked it.

all while wearing some bling. classy!

@sixtyfiveford

7 жыл бұрын

Gotta know what time it is.

@lukemartin7029

7 жыл бұрын

True. Nicely done.

Спасибо за видио помог

nice tool 👍

Молодец сделал отличный монтажный ключ

Damn right sixtyfiveford!,I'm building one for myself.cheers!

@sixtyfiveford

3 жыл бұрын

Thanks, I'm glad you liked it.

Thanks for the video tutorial. So I found these walker skids made from Teflon, they are curved to 90°and taper on the end I am going to back the skid with a piece of 1"X⅛" flat bar formed to the contour of the skid and weld that to my galvanized pipe, I also going to use ½"ID berings. I will be using the mount\demount bar for changing motorcycle tires.

@sixtyfiveford

3 жыл бұрын

I just saw your Facebook comment. What about layering two layers of your 1/8" flat bar to make 1/4"? I think it would hold up much better.

That is an outstanding idea.

@sixtyfiveford

4 жыл бұрын

Thanks, I'm glad you liked it.

@koonovo3dprinter822

4 жыл бұрын

Yes! This is very creative

I use my coats 4050a great machine

@sixtyfiveford

7 жыл бұрын

Great machine but it still scuffs up rims unless you use the protector booties.

Excellent Job !!!!

@sixtyfiveford

3 жыл бұрын

Glad you like it!

back in the day when making our tyr bar's. Removers we used old Ball joints welded to the bare-End " Like This" . Drill a tap to fit Ball joint nut screw in , Until tight. then wald the outer pin to the bar a dress to smoth . On the other end het the bar hot , falten & Temper when finish. form a hook to fit the rim brill bar & weld ball to a hook , mount so the Carver of the ball of the joint & valy is mounted. so it can push the tyre beds on to the weal . weld ball stem to flatend bar & hook . smooth to prevent ripping. in my day they wear riveted to bar & drest ro run easey ., so it slides Easy , of tyr ues plenty of sope . This bar was used to fit or remove tyers , uk England . To bay i would weld flat steel hooked steel , To 1" 'steel bar, & round into a carve with a Vealy carve to represent the ball agents the steel flat valley to let the bar . pres on the beed . Given the weldingkit of today & carves a good polishing well forward on the hook . given the wedding kit of today kit. In my Day we hadn't that kit they have to day we were still. welding with gas back then. HA LOL But not today it easily welded & more to the point strong , So just polish . The ends to help lesson damage. & of course for Aluminium plastic Coated kit is the way to go. plastic coated Yes. The ends. I have a bar my dad made back in 1920. it's still changes tyer's as well today in 2020. i don't use it so much but i have seen my grand kid's change tyr's with it , By gum son . try the ball joint mether on the end of a bar. it's a way to use up them old ball joints , we did , back Then. I do Bevel it's gotten better with age , Les England . "THEM WERE THE DAYS SON,

Thanks a bunch. I have come close to throwing my bar. I tore up the edge on a Cooper tire with it. It's not long enough and the end like you use is thick. Some of it has to do with that bead glue they used. Tire cost twice as much as the tire stand and tool.

@sixtyfiveford

7 жыл бұрын

I've tore a couple tire beads with my stock tire bar. Professional tire lube makes a big difference.

@dtrrtd774

7 жыл бұрын

Also be sure to remove any old wheel weights before mounting a tire, if they snag the tool it can end up ripping the bead when forced.