Cant wait to see belted 3.8 badlands!! This is such a great step forward proline!

@korbinbrayan4794

3 жыл бұрын

Pro tip: you can watch series at kaldrostream. Me and my gf have been using it for watching lots of of movies lately.

@imrangraham5596

3 жыл бұрын

@Korbin Brayan yea, I've been using KaldroStream for months myself =)

@miguelchris6374

3 жыл бұрын

@Korbin Brayan Definitely, have been using KaldroStream for since november myself :D

Thanks so much for reviewing these! Ballooning is annoying when you glue your own tires 😂

Thanks for the info and video

Very good video, subscribed, an look forward to more videos!

I put both the Badlands and Trencher 2.8 on my Rustler 4x4. The Badlands are a fast great tire. The Trenchers COMPLETELY change the handling of the car in the air. The rustler was fun to drive before now it's amazing. Definately would recommend. Great video

Proline always has Innovative products I’ve had there tires for years got some Gladiators for my RC10T. Love those tires.

@rcdriver

5 жыл бұрын

Gladiators were pretty awesome!

@nighthawkj30A4

5 жыл бұрын

RCDriver_Online yea to bad there discontinued

Love your reviews amazing always you Roc

Great after I just bought some trenchers!!!

I put some belted Badlands on my Kraton 6s and I lost so much more speed than I expected. Going to have to throw a new pinion on.

We needed these. The 6s trucks of today the tires can’t keep up. Heck even 3s. Can’t wait to get a pair. I found Sweeps racing tires pretty good for no ballooning though but also expensive

I'd definitely try them

Very different performance. Seems great for speed runs mostly. Landing hard might beat up all the suspension faster . Looks great 👍🏻

Cool info brother I have trenchers on my e maxx and now i must place my order for this ones too thanks a lot dude

@Not.The.Avg.Smitty

5 жыл бұрын

Let me know how the air control is, I tend to launch mine to the moon often!

Nice rig

Not bad it's a pretty good-looking Stampede as well

I just bought the old style trenchers for my xmaxx and also my erevo2.0.

Just bought the Trencher X tires for my Summit last week but it doesn’t go that fast anyways so no big deal. They did slow it down and reduce my runtime just a tad because of the weight. It makes a difference. Great grip though. They turn on a dime. 👍🏻

Awesome I might have to get me a pair

@CainSample

3 жыл бұрын

Stevo d from the 313💪✌ hope your doing good buddy

Cool shirt!

How well does the Stampede hold up to the added weight of these tires? Does the plastic suspension still hold up to light bumps etc? Or would it be recommended to just do the RPM arms at the same time?

Any suggestions for belted tiers on the Losi Baja Rey? id like to keep the same basic look as the stock. 3s is just messing up the body to much. thanks for your time and keep up the great content.

Now we need a 1/8 scale monster truck belted 3.8 MX38 Badlands and Trencher 3.8

I'm going to try a set on my E-MAX

Hello Greg I have a question for you.how do I go about finding a program card for the xtm x120bl esc.i remember seeing that you had a xt2 and had that system in it.and do you still have the programming card.i know it's been about 7 to 8 year's now.just wondering.

Just ordered a set and the promo code worked too, thanks man

@rcdriver

5 жыл бұрын

Oh cool. Enjoy the tires and thank you for the support!

@joshc8055

5 жыл бұрын

@@rcdriver does pro line usually take a few days to ship out an order?

Great paint job on this body can you show us how well this body fits on some of your crawlers. Pleaseeeeeee

Quick question I thought I had messed up my rear granite arm turns out my one wheel has a mean wobble and it's the banditos street tires with the 10 screws on the front when I switch the wheel to another arm its still wobbly what can cause this the tires are only 4 days old and not a huge run time on that at all maybe 10 hours in total

I got belted rears on my stampede vxl and non belted on the front, is it a huge deal with it being 2wd

i have these on a granite upgraded to 4s decent tires but the extra weight destroys driveshafts. had to go back to the stock fortress dboots

Imma need these i pop tires like balloons all the time

Hey what a great video, Str8 up sub'D by 1:50, thanks for your time

When are they going to have theys for the bigger trucks because the trenchers I have on my erevo 2.0 suck

I'm new to RC and bought a Stampede 1/10 with upgrade 2s-3s HW motor. I bought new tires and they immediately shredded apart at the rear. I didn't even get a 5 minute run. I swapped the front to the rear and then those shredded. Please tell me the belted tires are better and is there an actual speed rated tire like in a real car tire like touring tires compared to Z-rated speed tires? I need tires that can run now.

Ok so I have an ECX Torment with the Tazer 3300Kv Brushless motor, if I get these wheels, will the belt blow like you said? I do not know how to convert Kv to loaded RPM so I do not know if my rc can run these or not. if you can respond with an answer it would be greatly appreciated

I think we will be seeing allot more belted tires coming out.

@einaargednochsonn7099

5 жыл бұрын

belted Tires are trash, no aircontrol at all with em.

I think I'm going to get a set of these. Just very disappointed by the color options.

ProLine please make a belted 1/5th V tread monster truck tire for the Xmaxx 👍🏻

Do you find you lost control in the air with the belted ones? The only thing that worries me is the loss of control when doing backflips etc. Any feedback? Thanks

@trentmarlowe7655

5 жыл бұрын

Good question. I've strapped tyres and definately saw a reduction of air control.

@rcdriver

5 жыл бұрын

Most of the jumping I did was smooth transitions that required very little correction, but I did notice I was able to make those corrections. I'll try and make it back out next week to get a bit more wild with the truck to provide more feedback.

@Andre_M_3D

5 жыл бұрын

@@rcdriver thank you sir

@SebastianLong

4 жыл бұрын

Air control is mostly based on the weight of the tire. Centrifugal force is what makes you able to do backflips and such. These tires weigh more so than air control should actually be better. Just got my brother a set for his Stampede 4x4, so we'll see how much better or identical they do. If anything, I'd imagine much better but harder on the drive line. Fortunately me and my brother have modded the drivetrain to be capable of handling 6s power but only run it on 3. The biggest issue now is backing out screws, tires ripping away from the wheels, and motor shafts snapping. He only snapped one motor shaft thus far though but his Stampede will do 75 as it sits on 3s power. Even have GPS evidence. The other big problem is the wheelbase is too short for the power and it just wheelies over the wheelie bar like it's non existent. One of these days I'll post a video but I have no editing skills or programs to even do any editing.

Will these be to big for a armma typhon 6s ?

will these fit my DHK Zombie 8E?

Hoping for Badlands MX38 belted but have a set of these in the mail for my E Revo 2.0.

@brianwestgate7055

5 жыл бұрын

Just got my E Revo 2.0, running 6s, and thinking about ordering some as well. Let me know how you like them Espen!

Will these fit a rustler 2 wdr vxl?

I installed the Proline Trenchers HP Belted 3.8 sure changed the handling I don't like them. I put the Sledgehammers back on alot more fun. Any ideas of a different tire to go with they are just to wide for my liking. Would I be better with Belted or Non Belted. I don't do Skate Parks. Would as some point like to do some flips and flops.

Will they fit on the Arrma big rock ?

What are these like for bashing? Is it harder to pull of flips and will it be harder on other areas of the car, such as suspension when taking a hard landing?

@stevenahti2201

3 жыл бұрын

I'm wondering the same thing. I'm thinking my stampede is going to fall apart with these but I'm going to try them anyways lol.

@cliffjones9922

3 жыл бұрын

@@stevenahti2201 don't bother. I bought them and for bashing they awful. I gave them a few goes but then went back to the Badlands

My concern has always been the tires offer an additional bit of shock absorbency. On huge jumps I think eith these tires you would be much more likely to break parts. How much heavier are they than the regulars?

@rcdriver

5 жыл бұрын

One belted tire with wide adapter and hardware weighs 245 grams. I don't have a standard Trencher on a Raid wheel for a fair comparison.

Do you know what belted tires for the maxx

Ive been using SRC road and off road belted rc tires. Ive had them over 100mph with no ballooning. Hope these hold up

Fits good on Maxx 4S? I think the 3.8 is too big.

I want these for my Maxx but these ones in your video are too small arent they? And the 3.8hp is too big. Oh what to do? Lol. Great video, subscribed

I hope this helps keeping them from exploding also

@viperbite3086

4 жыл бұрын

Should

Do they have hex hubs for 17 mm for the rims it would be for my slash

@rcdriver

5 жыл бұрын

They do offer 17mm adapters for the Raid wheels.

What size for the JLB CHEETAH?

How do you vent this?

What is your opinion about those tyres? Proline 1170. Am thinking to buy them

Thanks for the info. Do they come in 17mm hex so I can use them with my arrma kraton.

@rcdriver

5 жыл бұрын

They come with 12mm hex adapters. The 17mm adapters are an optional part.

@rcjer6473

5 жыл бұрын

@@rcdriver thanks bro....ok so the way I go about this, I'm assuming is, to just order the wheels and tires and then search for the belted proline trencher 17mm hex adapters ?

@rcdriver

5 жыл бұрын

@@rcjer6473 The link in the video description goes right to the Premounted tires. They don't offer them unmounted. Not sure if they will. You'd need to get the premounted and then get the 17mm adapters. Here is the link for the adapters: www.prolineracing.com/accessories/6x30-to-17mm-hex-adapters.asp

There was a tire ad at the beginning of this video coincidence I don’t think so

Costly fixes tell me about it I drove my slash 4x4 in a pole frame, axle, and servo broke

Is proline going to release a solid axle 1/10th monster truck seems how axial isn't re releasing smt10

@nobodynoone3428

5 жыл бұрын

Are you really sure they aren't though?

@brettskinner5824

5 жыл бұрын

@@nobodynoone3428 their to busy releasing stupid micro crawlers

@nobodynoone3428

5 жыл бұрын

@@brettskinner5824 Yes, but couldn't they get around to another SMT10 eventually?

Are there tyres like this for other vehicles like a Traxxas slash 4WD. Or the xmax?

@rcdriver

5 жыл бұрын

No, just for 1/10 monster trucks right now.

@nobodynoone3428

5 жыл бұрын

You can put them on a Slash. Just need a different body or trim the stock one and maybe gear down some.

Basically a radial for an rc car

I just bought a set of 2.8 Badlands last month please don't make me spend more money on tires! lol

What took so long? They keep bringing out and promoting all these 6s and 8s vehicles, and majority of tires out there get destroyed in short order. Even if these cost more, will save money if they're not blowing out all the time.

I wanna see them on a kraton

How much heavier are they than the original?

@rcdriver

5 жыл бұрын

One belted tire with wide adapter and hardware weighs 245 grams.

@lmt200ish

5 жыл бұрын

@@rcdriver Thanks

I was already wanting a set of these for the Stampede I've been modifying for the last 20 years........this video does not help that any😅

Very nice tire, and highly anticipated, but really upset they don't go ahead and offer them with the 17mm hexs. They're sticking you with more money, and you're looking at $130 for a set of tires!

@rcdriver

5 жыл бұрын

I'm guessing they didn't included the 17's because then it would bump up the cost a little bit. But it looks like the 17mm adapters are about $7 for the 4. Not toooo bad. Maybe PL is watching the comments here, if enough people start asking, who know's maybe they'll offer a Belted pair of tires of with just 17mm adapters.

Been doing this for 37 years and will never get a belted tire.., tsa good option for the ones who cant controll their throttle. Never blown a tire, and allways 6s, says a bit 🤪..but its a good option ❤

Are this priced the same as the older ones? They look sweet! Thanks for the info!

@fren3198

5 жыл бұрын

50 per tire

@trentmarlowe7655

5 жыл бұрын

$50 a pair

What tyres

Is there something like these that'll fit on the slash 4x4 platinum

@DoctorCreepy13

5 жыл бұрын

donald studer Not yet, but short course tires don’t balloon much anyway.

@donaldstuder8618

5 жыл бұрын

@@DoctorCreepy13 lol yes they do mine are bald in the middle because of it

@viperbite3086

4 жыл бұрын

You can get these, but you have to get another kit to raise the body shell

Don't any of you put a layer of duct tape on the inside of the tire, does the same thing

@TheBigGuy78

5 жыл бұрын

The problem with duct tape is it makes the tires pretty noticeably heavier than without. I'm hoping proline made these lighter than what my taped Trenchers weigh.

@nobodynoone3428

5 жыл бұрын

@@TheBigGuy78 I'm curious about the weight too. My guess is these are heavier than taped tires. Depends on how much tape though also.

@teejay5673

5 жыл бұрын

Nobody No One a

@mrbasshead403

5 жыл бұрын

Funny lol I used model glue in my tires I coat the inside with the brush and no balloon.

@GreenJeep1998

5 жыл бұрын

I did on my Trenchers and Street Fighters when I bought them in 2012, but there is still some ballooning, likely from the tape's adheasive or the tape itself failing.

Would they fit on my rustler 4x4?

@rcdriver

5 жыл бұрын

Yes they would.

@viperbite3086

4 жыл бұрын

I have them on mine and they look really cool

I wish Proline would just rip a Dboots backflip tire of the rim and work out how they do it 😵😁🤙🏼 It’s not brain surgery

@DoctorCreepy13

5 жыл бұрын

CAMO RC !! Backflips are 100% a Badlands ripoff. Almost exactly the seams tires, except Proline put them out first.

@72nivo

5 жыл бұрын

doctor creepy I agree 100% creep. They are exactly the same apart from the rubber compound and the ribs on the inside of the tire that help with ballooning. It’s ingenious 🤙🏼

@mikelow4374

4 жыл бұрын

I have DBoots on my Arrma Senton 3s.. They are thin crap and shred constantly.. Even with these ribs you say are so good 😂

dear proline we need it on 1.9 scale tires for ultra4.

Would these fit 2wd slash at all

@nobodynoone3428

5 жыл бұрын

Yes, if you mod the body or have one that works with 2.8s. The Fusion body is one example.

@Airbear288

5 жыл бұрын

Well I have the prline ford raptor body

@nobodynoone3428

5 жыл бұрын

@@Airbear288 If it's a Slash sized body, these tires will rub unless you cut the fenders off.

I wonder how these would work with a 6s E Revo 2.0. 🤔

@rcdriver

5 жыл бұрын

Espen Lund These are the 2.8” tires with 12mm hex. Proline doesn’t have a 3.8” with 17mm hex for the E-Revo... yet? 🤔

@667Gurba

5 жыл бұрын

I hope for belted Badlands MX38s. 😀

@Crewchief227

5 жыл бұрын

@@667Gurba I hate my MX38 on my Revo 2.0, too soft, too much mass

@667Gurba

5 жыл бұрын

I haven't gotten them because they only come premounted. I would tape them. But maybe belted they would perform better?

If it's not gonna balloon, I'm not going to buy it! I love driving loose and on the edge of out of control 😈

I never really understood why good rc tires cost so much? They get comparable to real tires on a full size car. Even cheap car tires on a car have a ton more durability and quality then the best tires you can buy for an RC. Plus you get maybe 1/25th the amount of material in RC tires. No comparison! I just had to bring that up. Good video and it makes a world of difference having stronger better tires than that soft slop excuse for rubber tires companies love to sell us for our remote control vehicles. Especially the junk tires you get with many new RC cars and trucks!

@festushaggen2563

5 жыл бұрын

Saint Kenny To answer your question, it’s all about💰💰💰. Every company does it with their products. You get the deal on the main part and then the necessary accessories are 25% or more of the cost of the product it’s for. In power tools, you can pay more for batteries than the new power drill it’s for and saw blades can cost almost the same as the saw. Printers are cheap and the ink cartridges are expensive, etc. They keep us coming back and make us pay for it. 💰💰💰

@siouxunit17

4 жыл бұрын

Also the sell billions of car tires their production line is miles ahead of anything a hobby shops got going on

I'll stick to my Src's...

Tires look good for flat runs, but look like your bouncing more on landings. Which leads to the vehicle ending up on it's roof.

A trencher is a basher tire. Who cares about ballooning in a basher tire. Where this idea would work nice is in a race tire. I have problems with my race tire ballooning coming out of the turns witch makes my ass end slide. Driving a monster truck at 70 jumping 30ft in the air ballooning in not a worry lol

This can be done with duct tape on the inside

Mmm should put those porkers on a scale

I like to balloon my tires to gain a higher top speed out of my rc car.

@TheBigGuy78

5 жыл бұрын

That's a good call out. If you are playing with 6S Monster Truggies the difference in a ballooning tire vs a non-ballooning tire at full throttle is probably 15-20 mph

Yay for new tire choices coming out. Yay for those who wanted this. Yawn for trenchers..... again I still don't see the need for these, other than giving the people what they want. I'd like to see a weight comparison on the belted vs non belted tires. Rotating mass has to be higher on these bad bois

I'm not a fan of these. It's TRUE they dont balloon, but they are so stiff they make your car bouncy and the grip is not as good as regular trenchers. They just dont flex like the previous compound. I like the concept, but performance wise I like the previous trenchers better.

Waaaaay toooo heavy for hard bashing !!!! I ran them twice and broke a arms , diffs stripped , bent old stock towers as the extra weight is just too much on high impacts. Ok for light to mid bashing. But be wary - very very heavy

UPDATE! After discovering that these tires are nowhere near the same size and require re-gearing of my Rustler 4X4 VXL Pro-line refuses to refund my money. But only after accusing me of not reading their ad for the information that ISN"T PROVIDED and for not innately knowing that Pro-line tires "always"' come slightly larger than OEM. Then I was told they would do NOTHING for me unless I canceled my "Paypal dispute" with them. After quizzing further all they would do is give me 'Credit" toward another product of theirs. As IF I'll EVER spend a penny on their product ever again.

Already out of stock.......

@nobodynoone3428

5 жыл бұрын

They're not exactly limited edition.

@cwatson42785

5 жыл бұрын

@@nobodynoone3428 huh? I'm just saying they sold out quick. Hopefully they restock soon

@nobodynoone3428

5 жыл бұрын

@@cwatson42785 They will. Make sure you check Tower too.

@cwatson42785

5 жыл бұрын

@@nobodynoone3428 Good idea, thanks! The funny thing is I literally just bought a set of trenchers 2 weeks ago lol. Wish I had waited.

I'm not fan at all

@anthonybush9101

5 жыл бұрын

Why not? Just asking kinda new

@dannyoaks85

5 жыл бұрын

Neither am I. Might I ask why you're not a fan?

@rcpatapouf

5 жыл бұрын

Without ballooning you can't control your car in air ... You can't flip it

@dannyoaks85

5 жыл бұрын

@@anthonybush9101 usually belted tires are heavier, and for sure, as mentioned in the video, the belts can break and cause the tire to explode or just be unbalanced to the point of uselessness. In the real car world a tire can break a belt from hitting a pothole too hard, I can only suspect the rc version would have similar susceptibility

@rcpatapouf

5 жыл бұрын

And i looooove seeing my tires ballooning ☺️😅

Don't buy them! They are NOT sized for the Rustler/Stampede. You need re-gear your RC to 'Lower' the gearing(make it slower) or you'll overtax your motor/ESC and cause costly repairs. That sure as hell nullifies their whole purpose IMHO. A total misrepresentation and con. Pro-line LIES! Never again will I purchase another item from those lying thieves. NEVER!

Fits good on Maxx 4S? I think the 3.8 is too big.