HERES THE SAVAGE BRUSHLESS CONVERSION - kzread.info/dash/bejne/gKKB2caroqSwo6w.html

@jaybartlett1439

Жыл бұрын

what size pinion gear did you use?

Awesome conversion, Love how you went brushless too !!

@rcworxshop

2 жыл бұрын

Thanks matey, it worked better than I thought as the motor is a little small 👍🏻

Got the same car with the same problem.. Pull start lasted 2 days this time... Time for a swap out. Thanks for the video pal.

@rcworxshop

4 ай бұрын

Your welcome, thanks for watching matey 👍🏻

Amazing Conversion!!!

Nice video!! Great work!!! 😀

@rcworxshop

2 жыл бұрын

Thanks for watching matey, appreciate it 👍🏻

i will use this as a tutorial for my convertion thank you very much👍👍

@rcworxshop

3 ай бұрын

Fantastic!! Let us know how you get on 👍🏻

Very Nice

Some isopon fine mesh for those holes in the shell wouldn't be a bad shout. Keep the air in and the debris out. Full sends be a'comin!!!!!

@rcworxshop

2 жыл бұрын

Ohhhhh goos idea 💡 nice one 👍🏻 I'm sure he'll try and out send us lol

Had my nitro car 6 months now and 3 pull start springs gone and now here I am looking at how to do a conversion

@rcworxshop

2 жыл бұрын

Trust me you'll never look back, not to mention you can sell your engine and fuel tank for a pretty penny 👍🏻

@alexstoles1339

2 жыл бұрын

@@rcworxshop what nitro motor did u have? Are u selling it?

Love I'm gonna do it to my dt10

Wicked conversion, i notice you kept original centre diff and spur, what pitch pinion did you use?

Nitro Boogay? 😉 Nice video man!

😊

😸✌🏻

@rcworxshop

2 жыл бұрын

Thanks for watching matey 👍🏻👍🏻

great conversion! would you suggest going bigger than 3300kv motor?

@redblue40rc33

3 ай бұрын

Hobbywing 1650kv is better...smoke the tires easily

Awesome video. I ve just found my eb4 thats not been used for 10 years plus and got it running eventually lol. Im new to the electric side and want to convert to brushless. I would be super greatful if you could put me on to a motormount. And even any esc and motor tips would be mint. I know this is a big ask but would love it if you could help me out.

@rcworxshop

2 жыл бұрын

Appreciate that matey thank you for watching, here's a like to a motor mount on ebay and a great value esc and motor combo www.ebay.co.uk/itm/144629270598?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1tzoan7vsre&sssrc=2349624&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY esc and motor www.ebay.co.uk/itm/295021988958?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=owmmlsiysms&sssrc=2349624&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY

@andyboovy

2 жыл бұрын

@@rcworxshop thank you so much for the response. The mount page is no longer available but thing I have found a hsp mount that may do the trick.

@rcworxshop

2 жыл бұрын

The motor size is a 540 so as long as the mount is a 540 you'll be fine

Hello.i have a thundertiger ek4 s2 nitro and I want to convert it as well but here in Greece in Rhodes Island nobody knows how to do it.i ve just watched your video and now i have an idea from where to start.is there a chance you can tell me what do I need to buy and which electric motor?many thanks

@rcworxshop

6 ай бұрын

Thank you so much, that means a lot really appreciate the feedback I'll add a few links below that will get you started, keep me posted on your build 👍🏻 www.ebay.co.uk/itm/174828808651?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dPXUYVFRTle&sssrc=4429486&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY www.ebay.co.uk/itm/174836567796?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dPXUYVFRTle&sssrc=4429486&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY

Hi folks. I have a Kyosho Landmax 1/8 from the 90s I want to convert. It is currently a Nitro where do I start. ? Been out the game a long time

@rcworxshop

Жыл бұрын

Hi Mark, there's only a select few rc I would recommend spending the money on to convert, unfortunately the landmax isn't one of them unless it has sentimental value, the only reason I say this it conversions aren't cheap and would probably benefit you buying an electric modern day 1/10 buggy, car, truck? Any more questions please feel free to ask and thank you for watching 👍🏻

Hi could you show me how to put the motor mount on and the holes

@rcworxshop

Жыл бұрын

You need to put your motor in the mount with pinion gear on and line it up with the spur when it's perfect you need to draw round the motor mount on the chassis with a marker then you'll know where to drill the holes 👍🏻

Ebay link is bad, any more info on that motor plate? How did you select pinon size?

@rcworxshop

Жыл бұрын

Try this one matey, I used what fit on the day 👍🏻 www.ebay.co.uk/itm/194227210244?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=NMFbeOBZQ_W&sssrc=2349624&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY

@crazcougg961

Жыл бұрын

@@rcworxshop thanks!!!

Mine has 1650kv, max6 on 6s..24 pinion 40 spur.....😎

Hey man. How did you reverse the motor?

@Fast_Roy

6 ай бұрын

you can relocate two of the three motor poles and it wil switch directions

@rcworxshop

6 ай бұрын

Sorry for the late reply if the motor only has three wires coming off its called an un sensored motor, if that the case simply try the blue swapping any two of the wires from the motor to the speed control 👍🏻

Do you still have that two speed transmission o it ?

@rcworxshop

6 ай бұрын

No just the single speed 👍🏻

Tempted to do that with my traxxas tmaxx

@rcworxshop

Жыл бұрын

I've converted a tmaxx before, it turned out well 👍🏻

@redblue40rc33

Жыл бұрын

Did my tmaxx to brushless ..4s lipo, hobao 150a esc, 3200kv......wheelies all day ..just change out ya center front n rear drive shafts to HD 77mm metal dog bones shafts and diff cups ....stock shafts twist like a pretzel....but be easy on it.....front n rear diffs ain't made for brushless motors....center diff 2nd gear has to be locked in too with screws so ya have brake n reverse...it's a process to change over the tmaxx....motor mount I made out of aluminum 1/4" flat bar

How did you get reverse I've put ESC motor in and runs forward but not reverse thanks

@rcworxshop

2 жыл бұрын

Your esc will need to be calibrated, should be a little button next to the on switch / button

@scottporter463

2 жыл бұрын

My on switch is on a wire that comes from esc

@rcworxshop

2 жыл бұрын

Does it have a little push button by the switch? Or a little button the the esc?

@scottporter463

2 жыл бұрын

I've been told I need to lock the gears cause they are just spinning

@rcworxshop

2 жыл бұрын

Oh so the motor does revers but the gears don't?

Add purchase link, please

@rcworxshop

2 жыл бұрын

I've not got any as it was bits I had spare, what was it you wanted to know and I'll find out for you 👍🏻

Couldnt u just have gotten a starter box or electric starter

@rcworxshop

2 жыл бұрын

I've got one lol, I do prefer electric setup, I have other nitro models I use on the odd occasion 👍🏻 thanks for watching 👍🏻

Nitro was better now its just average

That motor seems a bit small

@rcworxshop

Жыл бұрын

Agreed but it works well and doesnt get to warm 👍🏻 only meant to be a cheap conversion 👍🏻

Sad

@rcworxshop

2 жыл бұрын

Why are you sad?

@ggwoods5684

2 жыл бұрын

@@rcworxshop poor engine just got removed from its home haha jokes

@rcworxshop

2 жыл бұрын

🤣🤣 I still like and have a bit of nitro in the collection but they are soooo temperamental, thanks for watching matey 👍🏻👍🏻

@ggwoods5684

2 жыл бұрын

@@rcworxshop haha no worries true they cna be fun while set up right haha

Did he really put a 540 can in a 1:8 scale and then power it with 4s ? 🤦‍♂️ Utter nonsense!

Don’t do this. Motor too small. KV too high. Will cook on 4S. Cheapest motor mount in the world. Get a hobao one instead. Bad conversion. Worst I’ve ever seen

@rcworxshop

4 ай бұрын

Don't talk silly, this is still going strong its been out at least 50 times, skatepark jumps speed runs etc

@rcworxshop

4 ай бұрын

Also Where's your video if your the expert 👍🏻

@michaelinzitari

4 ай бұрын

what a great idea. indeed i will make a video to show the world how it should be done. and you can guarantee i wont be drilling holes in the chassis like an amateur!!@@rcworxshop

@ggwoods5684

3 ай бұрын

​@@michaelinzitariyour just been silly and stupid 😂 its a hobby he got it working theres no right or wrongs if it makes him happy so what? Its working is it the best maybe not but is it still usable yes? Get a life lol