I recently replaced my clock spring and didn't notice these slots needed aligned. I had the extract same symptoms and this fixed my issue. Thank you!
@ericdorsey226210 ай бұрын
this video is awesome, best one out there. I'm in the middle of this shit right now, my son replaced the clock spring and he must not of got it back together correctly, but he drove it for about 2 weeks? strange, now the ABS is screeching whenever we drive it and turn the wheel. So yes you have to re-calibrate it with a scanner, from what I've seen cheapest scanner that does SAS {steering angle sensor} is about $250, but its a cheap Chinese one. I'm getting one for $315 at Autozone, the Innova 3160RS, not every scanner does SAS btw. garages want 1hr of labor for it - about $100-150
@daylight40110 ай бұрын
Thanks for the video replaced the clock spring and forgot to line it up.was having the same issue.thanks alot.
@jesusm1089 Жыл бұрын
Nice work! Thank you very much for sharing. I have the same issue with my Nissan and it gives me an idea now what do do.
@Chranos83Ай бұрын
great video, thanks for sharing.
@jokerfleckcast319611 ай бұрын
Thank you. Great video. Had exact problem. Replaced a clock spring but these tabs were not placed correctly. Re opened it and now error gone.
@randygonzales6559 Жыл бұрын
Thank so so much I just replaced the clock spring because my horn was not working . That solved my problem but after I did that my skid light came on and wont go away, I had a bald tire so I bought a new one thinking that was the problem but the light is still on . I think that steering sensor is not lining up . I need to take apart again and line it up correctly.. Thank you so much for this video.
@user-pg6wv9iy2m7 ай бұрын
Thank you very much.very helpful Video
@shawnmasters2751 Жыл бұрын
Great job my friend 👏
@charleshines852310 ай бұрын
I get that light too and the one that says brake as if the emergency brake was on. What might it be? A stuck emergency brake on one or both rear wheels? I know they have a cable connected to them and I have no idea if anything happened with it. It is getting near 60,000 miles. I don't know if a hose got damaged or what. It could be seemingly anything with these newer vehicles. It does not seem to lose control or do anything weird. Of course I would have to make sure not to do anything that could cause a skid since the lights may indicate it disabled the traction control for some odd reason. Is there any brake fluid that could have caused it?
@samfinkelstein5841 Жыл бұрын
Godsend! I just did the clock spring on a car and have this issue. I didn't line up the tabs!
@samfinkelstein5841
Жыл бұрын
Took it back off and the tabs weren't aligned. Lined them up and fixed!
@luisivanmorales5876 Жыл бұрын
Excelente ayuda Gracias por compartir
@bigboybuilder7711 ай бұрын
So in order to this job. We have to have a scanner similar to the one you have? I have an autell scanner, but I don't think it can check steering angle . What should cost of service be to have someone only reset the angle?
@coryament
11 ай бұрын
I think you can do it with that scanner but not sure. As far as having someone do the reset it really depends on the shop or you have do it.
@ericdorsey2262
10 ай бұрын
this video is awesome, best one out there. I'm in the middle of this shit right now, my son replaced the clock spring and he must not of got it back together correctly, but he drove it for about 2 weeks? strange, now the ABS is screeching whenever we drive it and turn the wheel. So yes you have to re-calibrate it with a scanner, from what I've seen cheapest scanner that does SAS {steering angle sensor} is about $250, but its a cheap Chinese one. I'm getting one for $315 at Autozone, the Innova 3160RS, not every scanner does SAS btw. garages want 1hr of labor for it - about $100-150 @@coryament
@Basesjuiced Жыл бұрын
Question...if im replacing the clockspring and put the sensor back correctly when transfering stuff over, will I have to use a scanner that can do a SAS reset? Trying to avoid having to go to a shop to reset the sensor after replacing the clockspring
@coryament
Жыл бұрын
I believe you will have to have a scanner to do the relearn but I'm not 100% on that.
@diamondevans3731 Жыл бұрын
Where you located I need mines fix please
@contendingforthefaith98974 ай бұрын
Replaced tie rod end on both sides of the Rogoe, steering wheel is turned to the left as I drive straight, now my traction control light is blinking, and the car is slowing down on its own.
Пікірлер: 24
I recently replaced my clock spring and didn't notice these slots needed aligned. I had the extract same symptoms and this fixed my issue. Thank you!
this video is awesome, best one out there. I'm in the middle of this shit right now, my son replaced the clock spring and he must not of got it back together correctly, but he drove it for about 2 weeks? strange, now the ABS is screeching whenever we drive it and turn the wheel. So yes you have to re-calibrate it with a scanner, from what I've seen cheapest scanner that does SAS {steering angle sensor} is about $250, but its a cheap Chinese one. I'm getting one for $315 at Autozone, the Innova 3160RS, not every scanner does SAS btw. garages want 1hr of labor for it - about $100-150
Thanks for the video replaced the clock spring and forgot to line it up.was having the same issue.thanks alot.
Nice work! Thank you very much for sharing. I have the same issue with my Nissan and it gives me an idea now what do do.
great video, thanks for sharing.
Thank you. Great video. Had exact problem. Replaced a clock spring but these tabs were not placed correctly. Re opened it and now error gone.
Thank so so much I just replaced the clock spring because my horn was not working . That solved my problem but after I did that my skid light came on and wont go away, I had a bald tire so I bought a new one thinking that was the problem but the light is still on . I think that steering sensor is not lining up . I need to take apart again and line it up correctly.. Thank you so much for this video.
Thank you very much.very helpful Video
Great job my friend 👏
I get that light too and the one that says brake as if the emergency brake was on. What might it be? A stuck emergency brake on one or both rear wheels? I know they have a cable connected to them and I have no idea if anything happened with it. It is getting near 60,000 miles. I don't know if a hose got damaged or what. It could be seemingly anything with these newer vehicles. It does not seem to lose control or do anything weird. Of course I would have to make sure not to do anything that could cause a skid since the lights may indicate it disabled the traction control for some odd reason. Is there any brake fluid that could have caused it?
Godsend! I just did the clock spring on a car and have this issue. I didn't line up the tabs!
@samfinkelstein5841
Жыл бұрын
Took it back off and the tabs weren't aligned. Lined them up and fixed!
Excelente ayuda Gracias por compartir
So in order to this job. We have to have a scanner similar to the one you have? I have an autell scanner, but I don't think it can check steering angle . What should cost of service be to have someone only reset the angle?
@coryament
11 ай бұрын
I think you can do it with that scanner but not sure. As far as having someone do the reset it really depends on the shop or you have do it.
@ericdorsey2262
10 ай бұрын
this video is awesome, best one out there. I'm in the middle of this shit right now, my son replaced the clock spring and he must not of got it back together correctly, but he drove it for about 2 weeks? strange, now the ABS is screeching whenever we drive it and turn the wheel. So yes you have to re-calibrate it with a scanner, from what I've seen cheapest scanner that does SAS {steering angle sensor} is about $250, but its a cheap Chinese one. I'm getting one for $315 at Autozone, the Innova 3160RS, not every scanner does SAS btw. garages want 1hr of labor for it - about $100-150 @@coryament
Question...if im replacing the clockspring and put the sensor back correctly when transfering stuff over, will I have to use a scanner that can do a SAS reset? Trying to avoid having to go to a shop to reset the sensor after replacing the clockspring
@coryament
Жыл бұрын
I believe you will have to have a scanner to do the relearn but I'm not 100% on that.
Where you located I need mines fix please
Replaced tie rod end on both sides of the Rogoe, steering wheel is turned to the left as I drive straight, now my traction control light is blinking, and the car is slowing down on its own.
@coryament
4 ай бұрын
You need an alignment
@contendingforthefaith9897
4 ай бұрын
@@coryament Right
Helo my frind me help u
Ware r u froom