Awesome video. Thank you it was very helpful

@Project_B

2 жыл бұрын

No worries 😁

What did you do with the ground, key1 and key 2 from the iso to vehicle harness

Thanks for sharing your experience with it! Planning to get a d22 and what's in there does not live up to what we are used to in our days... You did not show us how you take de A piller cover off... if that is done wrong, I am concerned plastic bits will brake off and the outcome won't be nice... Thank you so much!

@Project_B

6 ай бұрын

Hey, to remove the A pillar, peel back the rubber molding in the door. Then with a trim remove tool, start to pry the top of the A piller trim back. As it is just held in by clips, the plastic clips should pop out before the trim brakes. The first one will be the hardest to pop, but once you got it, the rest should come out a lot easier. You can use a screwdriver if you dont have the trim removal tools, but you just need to be careful not to scuff up the trim when prying

I have a PIONEER DMH-Z6350BT and have a rear camera. It takes 2 cam inputs. Any suggesting on how I can permantly power a forward facing camera?

Hi guys, I’m looking to get the same head unit for my 2011 yd25, it comes with a reverse camera as well, is that easily connected as well? Cheers

@Project_B

2 жыл бұрын

Hey Daniel, yep its quite straight forward in terms of the wiring. The hardest part will most likely be tracing it through the cab and tray to the back. I haven't done it for mine, yet it is something I'll definitely be doing in the future, especially how cheap the reverse camera for the pioneers are.

Does this way use the rear speakers? Or do you need to wire them up separately?

@Project_B

2 жыл бұрын

In the d22 navara we have, there are only front speakers, however if you've already got rear speakers hooked up you should just be able to plug them in when changing the head unit. Same goes if you have a sub as well

Would you be able to tell me if a Pioneer MVH-S425BT would fit in this vehicle

@Project_B

2 жыл бұрын

Hey Ashton, im not sure on that specific head unit but to my knowledge the mounting bracket is somewhat of a standard fit/size (fits most head units)

My 2006 Navara seems to have a completely different stock 7 pin plug to every available primary harness. Any ideas what to do? Sounding like I might have to wire it myself.

@Project_B

8 ай бұрын

Yeah you might need to do it the old fashioned way and wire it yourself unfortunately. Does the below link to this primary harness look different to your plug? aerpro.com/vehicles/nissan/nissan-navara-1997-2006-d22

Hi mate,I followed your steps but for some reason I can’t hear any sound but all the features on the head unit work. I’ve heard about there being an amp trigger cable but I can’t seem to find it. I have an 05 d22 nav

@Project_B

2 жыл бұрын

Hi Ayomal, I'm not sure what this issue could be. Id start by checking the harness and making sure its got a good connection. Also what headunit have you got? And are your speakers the factory ones?

@ayomalperera9736

2 жыл бұрын

@@Project_B I have a pioneer deh-x4750bt and yes the speakers are factory.

@Project_B

2 жыл бұрын

Okay, from doing some brief research, I don't see why it hasn't got audio coming through. I'd look through the troubleshooting for that head unit to see whether any of the solutions work. cms.pioneercarentertainment.com/files/Manual/DEH-X6750BT%20DEH-X4750BT_XNGS%20Owners%20Manual.pdf

On the aeropro website it only comes up with the iso harness and that’s it. What do I do

@Project_B

2 жыл бұрын

So the ISO harness will be the harness that adapts to your car. If you scroll down (aerpro.com/selector) where it asks for what headunit you have, put the model headunit in there. It should then give you the harness that will connect to your head unit. And all Aerpro harnesses connect to each other. I hope this helps.

Hi what did you do with the ground ?

@Project_B

Жыл бұрын

Hey, we put a ring terminal on the end and attached between the bolt that mounts the head unit. There are a few bolts behind the head unit that you can also use.

What year model is your navara? Depending on year model you need a t3 or a t2 harness, I have a 2006 and can’t find the info anywhere

@Project_B

2 жыл бұрын

Hey Marli, my nav is a 2010 model. From what ive found on Aerpro, it looks like if you've got a d22 zd30 (2006 or older), then the harness you'll need is a APP0120, but if its the newer d22 with the yd25, then you'll need the APP091. Hope this helps

Hey just wondering I have the exact same head unit and exact same car, however I have a half inch gap between the bottom of the head unit and the cover, just seeing if there’s any solutions to make it flush?

@Project_B

2 жыл бұрын

Hi Jyve, hmm thats odd. There is a small amount of adjustment you can do with the mounting bracket of the headunit but im not sure if it can fix a gap like that. But id start there and see if that can get it any closer

@jyvehudson7318

2 жыл бұрын

@@Project_B Thank you and another question, is there only the one size for that model pioneer, 6.8 right? Also did you use a trim or anything around the radio?

@Project_B

2 жыл бұрын

@@jyvehudson7318 Yeah i believe mine is also 6.8, and nah no trim used. What year d22 do you have? Could possibly be nissan changed the facia between the years?

@jyvehudson7318

2 жыл бұрын

@@Project_B 2004 my model is

@pantonsfishkeeping3512

11 ай бұрын

​@@jyvehudson7318same mines 2004 and I have that same gap, purchased the wrong iso harness today tho, gotta wait till the morning to make the exchange 😮

Where do you get brackets

@Project_B

2 жыл бұрын

The brackets for the headunit are just the oem ones. Should be there from the factory head unit. And they should line up with most aftermarket head units

You wouldn't be wanting to do this stuff on a new car! It would be way too complicated!

@Project_B

2 жыл бұрын

Yeah good point. Especially that everything now days is connected to the head unit