OK. Paying for installation.

@AnthonyJ350

4 жыл бұрын

It's worth it if you want the best result possible and you don't do this all the time.

@Jutoofficial

4 жыл бұрын

@@AnthonyJ350 where can you get it installed?

@AnthonyJ350

4 жыл бұрын

@@Jutoofficial Your local installation bay can do it.

Do you know which wire is to the antenna amplifier? I have really poor reception and I think they missed a wire or something....

I already did an install in a ford escape, this was helpful. The wiring in this car is honestly simpler and easier to work with than in the escape. I will be using my own amps, speaker wire, speakers, etc, so hopefully everything goes well

@AnthonyJ350

3 ай бұрын

Let us know how it goes!

i have an 2006 Nissan 350z roadster enthusiast package (non bose). In the Brown plug for the steering wheel control with 3 wires can you tell me what each of those 3 wires control on the steering wheel? is one of those 3 a ground? I bought one of those android head units from amazon that say they are compatible with steering wheel controls and have a learn feature and have the key 1 and key 2 wires coming from the head unit, when i bought it i was thinking i wouldnt need a pac unit but after watching your video im not sure.

Thanks for the great installation vid! I'm putting in my pioneer headunit in a day or two. I was wondering if the other video you mentioned for getting the mic cable through the a-pillar was just the video on removing the headliner. I didn't really see anything on the a-pillar specifically, and would like to know if it can be done without doing the whole front (or half the front) of the headliner. Also if you have any tips on getting from the center console, under the dash, and over to the a-pillar I'd love to hear'em. If i missed a particular video (I've watched almost every 350z related video, they're all great) and you can link me that'd be ideal. Great job with all these, I'll eventually be following your guidance for amps, front and rear speakers, and general wiring once I can get all the rest of the kit.

@AnthonyJ350

7 жыл бұрын

Hmmmm I have a Bluetooth mic run video as well. This video really covers the main things for what you're doing.

@johnwethekylow

7 жыл бұрын

ah. thanks i found it. Though i wish you could search within one user's videos. (something tells me you can and i don't know the right way to put it into the search bar, i just wish they'd put the search bar within your page of videos)

@AnthonyJ350

7 жыл бұрын

To help I'll be posting my main theory videos on the website

can you explain more on how to set the gain on the bose units? I removed my Bose unit and installed a Kenwood head unit and couldn't get any volume out of the system. I tried both adapters with no luck. I got tired of not having decent sound so I went back to my factory head unit. Any help would be greatly appreciated.

@gorkikanian1255

5 жыл бұрын

hey man I know its been a while but have you figured this issue out? I got this issue as well.

Hey Anthony, I pretty sure I'm going to be doing this very soon to my 06 roadster enthusiast. I shouldn't have any problems right? Also, I know you provided the website where all of this is from but could you possibly put the specific links into the description? I am a beginner at this and I don't want to mess things up.

@AnthonyJ350

3 жыл бұрын

Best thing to do is buy the parts from your local install shop as products and links can change over time.

I have an 04 z roadster, will this steering adapter "PAC SWI-RC" Work for me?

@AnthonyJ350

7 жыл бұрын

It's listed as compatible on their site, so it should work.

could you make a video on a bose one and how to replace headunit and set it up please !

@AnthonyJ350

4 жыл бұрын

It's pretty much the exact same procedure and parts.

@DaveSes31

3 жыл бұрын

@@AnthonyJ350 thank you for your video. The only question I have about using the Bose with the PAC is with regards to the grounding. Since you say the grounding in the 350z sucks. Do I have to ground the PAC? Or do I just ground the stereo and avoid using the PACs ground.

@AnthonyJ350

3 жыл бұрын

@@DaveSes31 I run all the grounds together.

This is awesome information, so I'm rebuilding my 2004 350z and the old audio install is ANCIENT, I do have two quick question as it's been close to a decade since I've had the dash apart, did you solder car to wiring interface, or did you solder wiring interface to head unit side? I'm going from an ancient Alpine IVA-W205 to an Alpine iLX-407, do I even need to change my harness set up, or are the adapters the same?

@AnthonyJ350

2 жыл бұрын

You solder the head unit harness to the aftermarket harness then plug it into the car.

Hey I have a question about the steering wheel control thing, I bought my 08 hr 350z with aftermarket double din kenwood radio. The volume controls don't work on steering wheel how do you get it to work? Thanks in advance Please help

@AnthonyJ350

3 жыл бұрын

Need to install this kzread.info/dash/bejne/a65twamdeajOZbQ.html

i have a question about the wiring. i bought a pioneer sph-da120 and i bought with it the adapter harness for the none bose system while i have the bose system. everything works fine when i connect everything but i dont have any sound at all. i tried re-installing the factory unit and gain the factory amp at max and then but back the pioneer unit but nothing. some say that the amp wont get any signal so it is not turning on. what should i do?

@AnthonyJ350

6 жыл бұрын

IlloDaGreek Did you hook up the amp turn on and amp ground wires? It's in the instructions and legend with the wiring harness.

Awesome, thanks for the video man really helped out and make things simpler.

@AnthonyJ350

6 жыл бұрын

Glad to hear it helped!

What head unit was it

Wait, so for people with the boes system... we need to turn our volume all the way up before preforming this install?

@AnthonyJ350

6 жыл бұрын

PsychicF 75% and yes.

@Turtle-.-

6 жыл бұрын

Thanks.

@AnthonyJ350

6 жыл бұрын

Juan Gordillo Are you doing an amp bypass?

@AnthonyJ350

6 жыл бұрын

Juan Gordillo You can only use the stock head unit. Also you don't need to cut anything, you just buy a wiring harness like in the video.

i have a 2007 with Bose, using the Axxess interface, which plug and cables should I use? I see you used the brown plug is that correct?

@AnthonyJ350

2 жыл бұрын

Refer to the instruction manual provided, it will tell you what to use for your application.

hey anthony ik you posted this awhile ago and might not look at the comments but i replaced my stereo mad sure everything was plugged in correctly my fuel temp sensor high and low popped up , i didn’t ground anything down is that most likely the problem??

@AnthonyJ350

3 жыл бұрын

Fuel temp sensor? You have a check engine light on now?

Would it be possible to put the stereo where the navigation system would be and leave the empty sorry I'm the bottom for Luke a cabinet?

@AnthonyJ350

5 жыл бұрын

Possibly if you did a newer screen from Pioneer or Alpine where you can detach the screen from the chassis and relocate it. There is a support brace in that area, so there is no depth.

YeSir...

I need sum help So I was trynna connect the harness to the rca with 0gauge but connect to a 4 gauge without any distributor then went around the car and connected it got the tail light but then I ran out of blinker fluid so I went to autozone..... oooooh nvm found the issue , its an automatic ..

@AnthonyJ350

4 жыл бұрын

Thanks for watching

i see you are a professional installer in Canada. Do you typically disconnect the negative baytery terminal prior to taking out the old radio or installing the new headunit?

@AnthonyJ350

Жыл бұрын

No, because if I disconnect the battery I cannot test any of the electrical circuits. But for novices, it's a good idea to do so. I have a lot of testing equipment and access to scan tools to diagnose and reset a vehicle.

Ok , Here’s. y question.. I’ve got a Bose system - O4 Enthusiast. From my research the Bose speakers and amp run on a uncommon resistance (03 Ohms? Making changing the speakers or amp next to impossible) Regardless if I’m to upgrade the system I need the PAC unit to bring in the speaker level signal from my new amp into the existing Bose amp. And follow all the same instructions other than presenting the volume to 75% on the Bose head unit..

@AnthonyJ350

3 жыл бұрын

Or you could bypass the factory amp in the back.

Idk if this should be a problem but when I have everything disconnected and turn on my car should my air be blowing out like crazy? It did last time I did this but idk if that was before I got the rest of the dash taken out.

@cursedracing8247

5 жыл бұрын

It has to deal with your climate control, with the dial knobs disconnected the fans don't know what to do so they go full blast. That's why you want to be careful not to tear the ribbon wire when removing the dials section.

@AnthonyJ350

4 жыл бұрын

That happens when the climate control is disconnected.

Do you have any advice on how to put back the AC computer when your putting everything back together? How do you reach the plugs to plug it in after your done lol?

@AnthonyJ350

5 жыл бұрын

Are you talking about the white box that has the ribbon cable leading to the controls?

@reesehutchins7770

6 ай бұрын

Yes talking about that white box. How to plug it back in when done??

Do you retain your steering wheel controls? Volume, phone... Etc

@AnthonyJ350

5 жыл бұрын

If the customer purchases the interface module that is compatible, yes.

hey mate! i have the bose system and all i cant work out is how the speakers / amp is supposed to work, i have everything else connected properly and the volume controls work (says its going up and down) but no sound is coming out. which part do i need

@AnthonyJ350

6 жыл бұрын

aussie dynasty Did you hook up the amp turn on wire?

@aussiedynasty7792

6 жыл бұрын

which wire is that? :)

@AnthonyJ350

6 жыл бұрын

aussie dynasty It'll say in the instructions. Typically it's blue/ white.

What did you plug in for “FL FR RR RL” for the speaker, there is nothing coming out of my Z to plug in for the sound yo travel to the speakers

@AnthonyJ350

2 жыл бұрын

What harness did you use?

First off want to thank you for all your tutorial videos because they save me so much money. Okay so on my nissan 2007 350z I have installed a bose head unit with a 800 watt amp and 10 inch subs. I connect my amp turn on wire to the blue/white wire on the aftermarket wire harness and the amp will not turn on. Do I need to wire it to the factory amp or should I switch it to the other blue wire?

@AnthonyJ350

7 жыл бұрын

Did you test the wire you're hooking up to with a multi-meter to see the voltage to confirm it's 12+?

@justinlopez2121

7 жыл бұрын

No I did not. When I do it and its not 12 volts what should I do? Also what should I do if it is 12 volts?

@AnthonyJ350

7 жыл бұрын

Justin Lopez You need 12 volts to turn the amp on. Sorry factory or aftermarket head unit?

@justinlopez2121

7 жыл бұрын

Okay thank you!

Is this a 2006? Mines an enthusiast and the cubby above the radio don’t have those plastic clips with screws underneath

@AnthonyJ350

4 жыл бұрын

It was a 2006+ it has the newer interior.

Hi Anthony, great videos . Quite helpful. What is the name of the standard Nissan connector for the base radio system with out amp. It is shown during the how to install a touch screen stereo - 360z at about 35 seconds

@AnthonyJ350

5 жыл бұрын

You can get it from Bestkits or Metra the part numbers would be BHA7550 or 70-7550.

@AnthonyJ350

5 жыл бұрын

Your local install shop should carry them for you

quick question do you know the modle of that Kenwood? If not that's okay, I just really like that head unit.

@AnthonyJ350

7 жыл бұрын

I think it was a DNX692.

@bradleybauder9043

7 жыл бұрын

Awsome, thank you!!

Hey, probably already commented, but just got through with an install. You mount the radio brackets, and then (Note this) the radio brackets mount and screw into the front dash directly. This ensures you get the alignment perfect. Then when you install the center console with the brackets already screwed to the dash you will get access to the four screws that mount the bracket to the car frame. The top screws can be access by removing the plastic plate at the bottom of the cubby.

@AnthonyJ350

4 жыл бұрын

Thanks for sharing!

@JS-ny9ge

4 жыл бұрын

@@AnthonyJ350 Really have enjoyed the video's Anthony! I have done quite a bit of work on my Z and your vid's have been very helpful.

@AnthonyJ350

4 жыл бұрын

@@JS-ny9ge That's awesome! Glad the videos are helping you with your car. 😀

how were u able to move your shift nob while in park? was your car on?

@AnthonyJ350

3 жыл бұрын

Turn ignition to the on position and push the brake.

Idk if you still read these comments...but I’m gonna ask anyway. Ok...my head unit wiring only has a blue white for amp power and no blue for antenna power. Can I wire the antenna to one of the wires not being used on the head unit?

@AnthonyJ350

4 жыл бұрын

You can hook up the antenna wire to the blue/ white of the new head unit.

@shadkowaleski1786

4 жыл бұрын

AnthonyJ350 but then what do you do with the amp power wire? I have the Bose unit. I just ordered the pac unit to try again. You think I can splice the amp power and antenna to the same blue white wire since pioneer doesn’t have both on their harness?

@AnthonyJ350

4 жыл бұрын

@@shadkowaleski1786 Yup you can do that on the vehicle side of the harness. I talk about it in this video kzread.info/dash/bejne/lW18uJmhm63bhKQ.html

Wait how the hell did you reinstall the AC box plugs in the back? You had to forcefully remove them with a screw driver in the beginning with very little room to move. Also, am I going to run into the same type of installation if I already have an aftermarket head unit installed? It broke on me and I need to replace it. I couldn't get a straight answer on whether or not I needed another double din dash kit and if I would need to solder my wiring harness. I had it professionally installed the first time.

@AnthonyJ350

7 жыл бұрын

DigiSpecMedia The double din trim is just a trim and you use the factory metal brackets to hold the head unit in place.

The last guy who had my Z took off the brackets and ghetto rigs the radio in there now to stay up with the medal bracket from the radio itself. Can't find where to purchase the brackets other than ebay.

@AnthonyJ350

7 жыл бұрын

That factory brackets are the way to go. No wrecking yards in your area?

@mckinneytexaszeds5922

7 жыл бұрын

no not with z's ... im ordering some from ebay. Also t5i is on the way tpp ;-)

@AnthonyJ350

7 жыл бұрын

Did your stickers come in yet?

@mckinneytexaszeds5922

7 жыл бұрын

Not yet

Do you by any chance have a link to a diagram of a stock unit for an 03? I can't find any that matches my car.

@AnthonyJ350

2 ай бұрын

Try the12volt.com

@CWFDSmokeEater

2 ай бұрын

@@AnthonyJ350 tyty

I got a Bose sub but it constantly cuts out, was told it might be my amp?

@AnthonyJ350

7 жыл бұрын

Steven Beatty Ya I typically bypass the factory Bose and start from scratch with new gear. sounds so much better.

@stevenbeatty3872

7 жыл бұрын

Thoughts on kicker?

@AnthonyJ350

7 жыл бұрын

Steven Beatty Really good brand. Their IQ lineup looks cool.

@aidancookson6485

7 жыл бұрын

I had this problem too on my 2004 Touring. If you open up the sub amp you will find a grey box on the circuit board. That part gets loose and needs to be held in place. You can accomplish this by adding a piece of rubber ontop or even shoving a wad of paper in there. Good luck!

@dylanverkler4552

6 жыл бұрын

Owe is what I am going to keep it’s grea

Did you explain how to use the cheap one in the beginning of the video

@AnthonyJ350

11 ай бұрын

Cheap what?

Anthonyj350 Hi I just bought an 03 350 Z touring with the Bous stereo, the volume doesnt work, it was loud enough when i bought it, but no adjustment, now volume is almost gone, any ideas whats wrong. Really want to leave car original if poss, thank you.

@AnthonyJ350

7 жыл бұрын

Does the number change on the head unit when you adjust the volume?

@keithsimpson8442

7 жыл бұрын

no nothing

@AnthonyJ350

7 жыл бұрын

Keith Simpson It's most likely the head unit is malfunctioning. Only way to test is to put another unit in.

@keithsimpson8442

7 жыл бұрын

ok thank you, really wanted to try to keep this one as its got the wood trim all over it.

@keithsimpson8442

7 жыл бұрын

Anthonyj350 is it possible to get the head unit fixed if not can you suggest a good double din, dont need the navigation or blue tooth, would rather spend the money on good stereo, thank you.

I’m still a little confused on exactly how to work this if I have a boss system

@AnthonyJ350

5 жыл бұрын

I recommend bringing it to your local install shop, there's a few things you have to do to make it work and sound properly.

can you make a video on how to find a cheap nissan 350z

@AnthonyJ350

4 жыл бұрын

I can try, you'd have to look for salvage title cars and just make sure the unibody is straight.

Whats the model of the unit?

@AnthonyJ350

7 жыл бұрын

Kenwood DNX 692.

What size is that head unit? Also is it double din?

@AnthonyJ350

2 жыл бұрын

Standard double din size

Do I need the system interface?

@AnthonyJ350

5 жыл бұрын

Does your car have BOSE?

Where do I ground the black cable?

@AnthonyJ350

4 жыл бұрын

Chassis

Hey Anthony. Is this a difficult task to install a new radio for a beginner like me?

@AnthonyJ350

Жыл бұрын

Depends if you watch the video and if it makes perfect sense to you or not.

@robb5289

Жыл бұрын

@@AnthonyJ350 The wiring part seems a little complex.

@AnthonyJ350

Жыл бұрын

@@robb5289 I recommend paying a professional shop

@robb5289

Жыл бұрын

@@AnthonyJ350 Did you have to do a parking break bypass? or maybe its just here in the US.

@AnthonyJ350

Жыл бұрын

@@robb5289 Hook up to the parking brake wire

How you run the ground from Ware

@AnthonyJ350

Жыл бұрын

Add an extra black wire with a ring terminal and attach it to chassis somewhere

Where did you get the dash trim

@AnthonyJ350

7 жыл бұрын

Young Hustler I carry them at my work. Most install shops will carry it or be able to order it for you.

Do you still have that stock stereo and would you sell it?

@AnthonyJ350

7 жыл бұрын

I have to check, I think it's gone. Why not just go aftermarket?

@robertrosal9034

7 жыл бұрын

I want to keep everything stock and clean. btw, do you have a video on how to paint the top cover of the speedometer? That scratches easily too.

Does someone know whether the maxima 08 with bose sound system, no nav uses the same adapter?

@AnthonyJ350

5 жыл бұрын

You can look it up on pacaudio.com

@mickaeldavid1304

5 жыл бұрын

Tanks Anthony!

@AnthonyJ350

5 жыл бұрын

@@mickaeldavid1304 No problem!

You did not mention anything about the antenna adapter is one needed ?

@AnthonyJ350

7 жыл бұрын

Og boost Junkie Yes you'll need a Nissan antenna adapter from Bestkits BAA9 I believe.

@kingsavagez6368

6 жыл бұрын

Depends on your radio. My pioneer 2300NEX is a direct fit

Hey I'm still having trouble with the hissing/buzzing noise, I have the PAC ROEM-NIS 2 Wired going into the factory harness and the bose subwoofer installed. I think I know the issue (ground) but im not 100% i've re-wired the whole thing twice to make sure and all the wires are matching the only thing I can think of is that you mentioned you have to create your own ground however my head unit has a ground that I attached with the PAC ROEM-NIS 2 and that leads into the car harness. Can you help/guide me where im going wrong or what I should do to fix this? I have images of the wiring so help show it better if needed

@AnthonyJ350

4 ай бұрын

Did you ground the harness like how we did in the video?

@prokskaterjassal

4 ай бұрын

@@AnthonyJ350hey just like you my after market head unit has a ground that I attached with the PAC ROEM-NIS 2 ground however I don't know how to ground from the car harness wire like you were talking about starting at 10:21. Can you please explain how and where you did this portion from exactly?

@prokskaterjassal

4 ай бұрын

which wire did you create the ground from (car harness) that you attached to the subframe using the grounding bolt?

@AnthonyJ350

4 ай бұрын

@@prokskaterjassal I take the ground wire and bolt it from the head unit and ROEM-NIS2 and bolt it to the subframe in the dash.

@AnthonyJ350

4 ай бұрын

You can see the bolt I threaded into the round bar for the subframe above the radio at the minute mark you pointed out

So do we always connect the green wire to ground 🤔🙈

@AnthonyJ350

7 жыл бұрын

This application is for a non-Bose system. So it'll be different for Bose

@catracho93

7 жыл бұрын

Lol no I meant you bypassing the Parking brake

@AnthonyJ350

7 жыл бұрын

Ovin In this application yes, if you are taking your 350Z offroad or only if your co-pilot ;)

hey does anyone know where I can find the PAC ROEM-NIS2 Wiring Interface he used in this video? I am from Canada I cannot find it through the amazon link and also eBay, the source, factory direct tech source and other electronic stores I could find. I have an 04 touring and I really need to get this so I can put everything back together and get the car on the road again

@AnthonyJ350

Жыл бұрын

Your local car audio shop would have it or can order it for you.

@prokskaterjassal

Жыл бұрын

@@AnthonyJ350 hey thanks for reaching out, I was able to get my hands on one however the hizzing sound was still there, turns out one of the previous owners took out the bose sub so I'm not sure where I go from here. Am I sale to install any sub on the factory location/ wiring or just the bose one that came with the car?

@AnthonyJ350

Жыл бұрын

@@prokskaterjassal I think an aftermarket amp and sub will have more bass, but it's more effort to install.

@prokskaterjassal

Жыл бұрын

@@AnthonyJ350 do you think I will be able to install it ar the factory bass location? I really don't want to install it in the truck because it already doesn't have a lot of place to carry stuff

@AnthonyJ350

Жыл бұрын

@@prokskaterjassal Yup you can, you'll have to build an enclosure that can bolt in (preferably)

Dude, I need help. I’ve got an 04 350z and I bought it a while back. The dude who had it before me tried to install some stereo in it and couldn’t figure it out. I’ve blown like 5 fuses already. I redid the wiring harness and cleaned it up a bit and I’ve tried connecting the grounding wire to 3 different spots and nothing is helping. Does anyone have any idea what the heck it could be?

@AnthonyJ350

Жыл бұрын

Does the car have the BOSE system?

@damainhickman8667

Жыл бұрын

@@AnthonyJ350 no it doesn’t

@AnthonyJ350

Жыл бұрын

Did they use am aftermarket plug or cut the wires at the stereo? Is there an aftermarket amplifier?

@damainhickman8667

Жыл бұрын

@@AnthonyJ350 so they have the wires laid out for an AMP but there isn’t one in here. I found a like green wire running down towards the parking brake that was cut, I have no idea what it goes too though

@damainhickman8667

Жыл бұрын

But they used a plug for the wires running to the stereo

im....lost

@rockymodzdiy

5 жыл бұрын

🤣🤣🤣🤣🤣

@JESUSCHRISTISTHEKINGOFKINGS

5 жыл бұрын

i am in the same boat but i'll figure it out eventually :^)

So was removing old radio unplugging white wire cap and it broke what do i do now

@AnthonyJ350

2 жыл бұрын

Swear a little and grab a beer.

@Hazy4oo

2 жыл бұрын

@@AnthonyJ350 continue

@AnthonyJ350

2 жыл бұрын

@@Hazy4oo Which part broke, you got a picture? You can send it to info@gofasthavefun.ca

@Hazy4oo

2 жыл бұрын

@@AnthonyJ350 the whole white cap over the radio wires

@AnthonyJ350

2 жыл бұрын

@@Hazy4oo You can't click it back on?

Where is your shop ?

@AnthonyJ350

5 жыл бұрын

Lower Mainland BC Canada

Please tell me there is a simpler method

@AnthonyJ350

5 жыл бұрын

You can pay an experienced shop to do the work.

Can I get someone to do this for me?

@AnthonyJ350

7 жыл бұрын

Win Studios Yup your experienced local install shop can do it for you.

Why does my head unit turn on but all I hear is a clicking noise

@AnthonyJ350

Жыл бұрын

Does it have the BOSE system?

3rd

@ZHGAmingAllTheWay

7 жыл бұрын

2nd

@camarondemelon1675

7 жыл бұрын

ShortManFilms first?

In the video

@AnthonyJ350

4 жыл бұрын

Yes?

It has the one you have

@AnthonyJ350

5 жыл бұрын

You need a wiring harness and a steering wheel control module. If you have BOSE you want the interface as well.

@jovanyhernandez2313

5 жыл бұрын

AnthonyJ350 is it fine if I don’t have the steering wheel harness?

@AnthonyJ350

5 жыл бұрын

@@jovanyhernandez2313 It's optional to maintain.

@jovanyhernandez2313

5 жыл бұрын

Thank you so much!

@jovanyhernandez2313

5 жыл бұрын

Last question😂 does the wire harness effect the sound quality?

Heatshrink

@AnthonyJ350

4 жыл бұрын

Yes

Name kenwood player

@AnthonyJ350

2 жыл бұрын

I named it Ken.

Where are you based at I hope Los Angeles

@AnthonyJ350

7 жыл бұрын

Yup, we're in Vancouver Lower Mainland British Columbia.

2:01 You never explained if its necessary to shift the gear like you show here Also didn't even show theres a plug to the oil gauges and how to remove that.

@AnthonyJ350

Жыл бұрын

If it's in the way move it. You unplug the gauges when you have them loose.

Thanks for skipping the part where u get the center piece off. I unscrewed all the screws u said. Then what?. Mine wont pop out without breaking

@AnthonyJ350

4 жыл бұрын

Did you try reading the instructions with the mounting kit?

@AnthonyJ350

4 жыл бұрын

479 other people figured it out

@thesouth50

4 жыл бұрын

@@AnthonyJ350 it was already in. I was trying to replace it with a different head unit. I had a dd clarion I wanted to use and replace the dd kenwood that was in already. I finally got it. None of the videos I watched had aftermarket radios already in. They were all factory radio. Whoever put mine in before I bought the car used a piece of metal strap to the back of the radio. That's why it wouldn't pull out. I had to literally take everything apart to get it done. When I put the clarion in I didnt re use that strap he had

@AnthonyJ350

4 жыл бұрын

@@thesouth50 I guess you can retract your first comment then.

@thesouth50

4 жыл бұрын

@@AnthonyJ350 no my statement is the same. The video skips the part I wanted to see between 3:23-3:30. Where the unit pulls out

350 zed :(

@XxDylanRockzxX

7 жыл бұрын

jacob bana Canadian

@AnthonyJ350

Жыл бұрын

It's how we say it in Canada

Me: sees automatic 350z...."wack"

@AnthonyJ350

Жыл бұрын

Manual isn't for everyone. Definitely more fun though.

This is too hard. 😬

@AnthonyJ350

4 жыл бұрын

I recommend getting your experienced local install shop to do the job for you.

@jdmcivicsi90

3 жыл бұрын

@@AnthonyJ350 what happens if you dont program the new aftermarket head unit, would it work just fine without the steering controls? And just control everything from the screen and the remote control the aftermarket unit comes with?

@AnthonyJ350

3 жыл бұрын

@@jdmcivicsi90 That's correct. Steering wheel controls are just optional for operation.

@jdmcivicsi90

3 жыл бұрын

@@AnthonyJ350 thanks!

Automatic? Haha, why bother? Save money and get a camry if you can't drive.

@AnthonyJ350

6 жыл бұрын

Maybe the owner physically can't drive manual but likes the car. I own a manual myself and prefer it, but don't be so quick to judge. This is my car actually kzread.info/dash/bejne/n4aVstaclZCnito.html