This is beyond perfect! Everything is explained in great detail and I really liked that you also explained what you need to watch out for when installing speakers in a 350z!

@AnthonyJ350

7 жыл бұрын

xXYannuschXx Glad it helped you. Make sure to check out my other 350Z videos.

@xXYannuschXx

7 жыл бұрын

Do you have a link to the Tesa foam? The only one I can find has the glue on the flat side

@AnthonyJ350

7 жыл бұрын

xXYannuschXx No I don't. We get ours straight from the distrobutors.

Thanks for making the video Anthony, worked a treat following your instructions.

@AnthonyJ350

8 жыл бұрын

Glad it helped you!

Love your how to video's Anthony. I had to review how to remove the tweeter pod to keep from breaking. Couldn't remember how it came off. Getting ready to re-tint my windows. Haven't seen a video in the last few days...hope all is well.

@AnthonyJ350

5 жыл бұрын

Thanks! Ya I have to scale down the frequency because I'm so busy in the shop/ life. I am working on an oil cooler video hopefully coming out later today or tomorrow.

Nicely done my friend. You go all out. Better than factory. 👍🏾

@AnthonyJ350

6 ай бұрын

Thank you!

Awesome install

@AnthonyJ350

8 жыл бұрын

+John “TMONEY” Furious Thanks! It's just thorough. Anyone can do it.

Shot this was unbelievably helpful !!!

@AnthonyJ350

8 жыл бұрын

+Aidan Judd I hope you're adding sound deadening to your door to help it sound better :)

Really excellent vid bud

@AnthonyJ350

7 жыл бұрын

alightlefton Thank you!

thank you!!! well explained video.

@AnthonyJ350

4 жыл бұрын

Glad to hear it helped!

If my local installers did this type of job I wouldn't have done it myself. Good stuff.

@AnthonyJ350

7 жыл бұрын

N English My customers have to ask for it because a majority of people won't pay for labour to do it this thoroughly. I do a scaled down version of this which is like 80% of what you see in this video so people get better sound quality but doesn't cost too much.

@no_handle_required

7 жыл бұрын

AnthonyJ350 at least you give them the option and you have the skill, it's not worth the price when you know more than the installer and care about quality. Hope you do your thing for a long time and set the example.

@AnthonyJ350

7 жыл бұрын

N English We're trying to do as many cars as we can showing people online as well so people can see a different way than some stuff we've seen in the past.

Superb video as all your videos are! 👍 Hope you don't mind me asking but looking at swapping the door speakers on my Z and wondered what is the maximum depth of speaker you can get away with? 🤔

@AnthonyJ350

4 жыл бұрын

If you're not using spacers a JL Audio C1 is your best bet, you'll still need a speaker adapter.

Great video and thanks for taking the time to make it. I wonder if you would t mind to link some of the items you used today plz?

@AnthonyJ350

2 жыл бұрын

It's really best to consult your local install shop because the parts may slightly vary depending on the speaker.

awesome vid thank u

@AnthonyJ350

6 ай бұрын

Glad you found the video helpful!

good job i did the same on my 350z

@AnthonyJ350

8 жыл бұрын

+Omar Ortega Nice, what did you put in your car?

Followed this install a few weeks back, some corrections/additional tips to this process. They make a custom 6 ½” Speaker adapter for most Nissan models (part number CECOMINOD020597). This is an EXACT fit into the 350z. Note for larger speakers like the ones Anthony installed and myself you will need another ½ inch to clear the window when rolled down. I would highly recommend getting this adapter as it is no nonsense, exact bolt in, no modification. Just don’t overtighten the plastic seemed it would give way under too much force. Anthony mentions that he may run fresh speaker wire later. What he didn’t mention is how big of a pain it is. I ran new cable on the first shot. If you look online most people seem to be drilling/modifying their door harness to run 14-16 gauge cable through. After reading a few horror stories about how their door electronics were no longer working due to the modification, I went a different route. I cut holes in both the door and inside car and ran a custom loom for only the 14 gauge cable(used a Dremel metal cutting tool + step up drill bit on power drill). Nice part about this all is I was able to mount the crossovers in the kick panels. To summarize it all, you better be ready if you plan on doing a custom cable install. The jump from using factory wiring to custom was pretty crazy in complexity. I used all the products Anthony suggested except the plastic adapter and speaker company, and it came out great. I will say however that I would be curious of what would happen if you just used the fast ring center ring instead of the wave breaker. I doubt there would be much difference. In addition the Fast rings foam, you have to cut in half. The speaker especially the one me + Anthony installed are so large that the rings need to be reduced in size. In addition, everyone commenting on the location of the tweeter. Yea, it could be mounted in a better location, I’ve seen a few threads of people mounting it in the pillar. If you are going to that level, the mid driver is not optimal either. The speaker grill on the door card/panel doesn’t line up perfectly, and the location isn't the best. I’ve seen some guys do some custom work with that as well. In the end how far are you willing to go? I will say for most normal people who enjoy good quality audio, you will be satisfied with setup shown by Anthony. Pictures of install: imgur.com/a/7jpsH Oh and most of all, thanks Anthony for taking the time to show everyone your install procedure

@AnthonyJ350

6 жыл бұрын

Joe DeSantis Thank you and thanks for sharing your experience and feedback as well!

@AnthonyJ350

6 жыл бұрын

Where did you get that door boot for your speaker wire btw?

@Joe_DeSantis

6 жыл бұрын

AutoLoc DLOOM Rubber Door Wire Loom off amazon. Has a Built in grommet both ends. Just drilled a 5/8's hole hit the holes with some paint, and ran the loom. They are $10 a pop, but made the install pretty clean, easy in that regards.If you are worried about sealing it off, you could use some Black Silicone.

@AnthonyJ350

6 жыл бұрын

Joe DeSantis Awesome thanks! Your install looks solid. More cutting I'm willing to do to my car. Good job.

@teamradrz1

5 жыл бұрын

I know this is old but I have the Hertz speakers and going to be doing this same install, (thanks for the part #) do I need an additional 1/2" spacer on top of this spacer/adapter plate? Thanks

Will this work pretty much the same way for 370z?

@AnthonyJ350

6 жыл бұрын

PipsUniversity Similar

anthony..i have a question... i've changed the speaker in my doors..but i kept the old tweeters still plugged.. is it possible that those prevent my new speakers from playing the high frequencies? maybe these tweeters still use a canceling capacitor or something.. any advice>? thanks

@AnthonyJ350

6 жыл бұрын

What's probably happening is you have a factory amplified system that crosses over the speakers at a particular frequency. So if you put a coaxial speaker in the door, that speaker does not get full range because of the amp and that's what is preventing the high frequencies from playing.

Great!

@AnthonyJ350

8 ай бұрын

Thanks for watching!

I completely read that wrong... I thought it said computer speakers... I was like I gotta watch this... Lol

@binky44

7 жыл бұрын

Gnik4144 fucken same 😂😂😂😂

@AnthonyJ350

4 жыл бұрын

Lol, thanks for watching anyways!

Question do you thing adding all that foam and noise reduction stuff and leave the original speakers will make any difference in making better quality in the OEM Bose system ?

@AnthonyJ350

5 жыл бұрын

For sure, if you can cut down road noise and distortion, even factory speakers will see an improvement

Just bought a 350z, thinking about changing the speakers. What do you think about FOCAL speakers? Excellent videos bro

@Orange-yp9bl

4 жыл бұрын

Memphis Audio . Street Reference this is their Entry level Audio

@AnthonyJ350

4 жыл бұрын

Focal is an excellent brand. Make sure you amplify them.

Hi.what system do you have installed to monitor the air fuel that's above your radio.and what alarm system do you have that you can control everything from a remote

@AnthonyJ350

6 жыл бұрын

Gerrit Snyman I'm using a Greddy Infometer Touch with a t-harness and switch so I can turn it off for servicing and doesn't interfere with diagnostic equipment. The remote start and security is a Viper 5806V with a DBall2 interface. kzread.info/dash/bejne/nm2uqcV6iZazgaQ.html

I’m only trying to find out how in the hell I replace the lock cables, it’s such a pain. My car is low and the door doesn’t stay open (bad hinges) over all I’m stressed out over this crap.

Did you cut the stock speaker adapter plug and just wire everything to it instead of routing new wires through the molex? also how are you running the tweeter wires to the rest of the system? it's very difficult to make that out. I'm assuming from the tweeter you're running the stock adapter and then to the crossover using aftermarket wire?

@AnthonyJ350

2 жыл бұрын

I used the stock wiring but I put connectors on and wired it directly to the passive cross overs.

How much would you charge me to do that to both my front door speakers if I already had all the product to be installed? Btw great videos man, you really know your shit and are good at what you do! Keep the vids coming

@AnthonyJ350

6 жыл бұрын

Chris Richards Do you live in Vancouver? Why not just visit my shop?

Hi Anthony, I am looking for door speakers for my 350z. I would like to ask: in your experience, what's the max depth of my speaker without hitting the glass? I have ordered a 7/8 inch spacer but still looking for speakers. Thanks.

@AnthonyJ350

7 жыл бұрын

Rocky Tse I don't remember off the top of my head. JL Audio C2 speakers should fit easily.

@Jianemba

6 жыл бұрын

Buy spacers from crutchfield for 6.5 components

HI Anthony, based on your video, I decided to upgrade my door speakers. However, having a little dilemma with the dls crossover. I truly want to do a good job securing it but the crossover casing does not fit flush at your selected location. I think that is the best location for me aswell. Do you have any tips in how to secure the crossover correctly? I welcome you sage advice, George

@AnthonyJ350

6 жыл бұрын

george sanchez You can make a mounting surface out of ABS plastic and mount the passive crossover to that after.

@georgesanchez9971

6 жыл бұрын

I understand! I was also thinking of putting two .5 inches wide brackets that would allow me to have an even surface to mount the crossover. Thank you for your advice!

@AnthonyJ350

6 жыл бұрын

george sanchez Yes you can do that as well.

Do you also need the speaker adapter plates for the rear speakers too or just the fronts?

@AnthonyJ350

6 жыл бұрын

The rear speakers they line up with the holes, just use sound deadening during the install. kzread.info/dash/bejne/immEl5qrlrCzZMY.html

Do you think it was a good idea to try and use the door itself as the speaker enclosure instead of those foam baffles?

@AnthonyJ350

4 жыл бұрын

What we found through practice is the foam or plastic speaker baffles are too small (factor woofer displacement) and you loose a lot midrange bass from the speaker.

@MeatPopsycle

4 жыл бұрын

Gotcha. Thanks for the response.

@AnthonyJ350

4 жыл бұрын

@@MeatPopsycle No problem.

My stock speakers blew out this week and Im looking to replace the speaker just like in this video. I have an old stereo (alpine iva d310) not sure if that matters, what would you recommend me getting now? I know newer speakers have came out since this video was release and maybe you can guide me on what models to look at. Great video btw.

@AnthonyJ350

2 жыл бұрын

JL Audio C2s are a fantastic value and will be easier to fit than the speakers I used. Depends if you want a lot of mid bass. If you do a larger speaker like the Hertz used is probably what you want.

@ivanbelmonte6284

2 жыл бұрын

@@AnthonyJ350 Thank you for the recommendation !

@AnthonyJ350

2 жыл бұрын

@@ivanbelmonte6284 You're welcome 🙂

where can I find those speaker adapters that you used and what's the name of them.

@AnthonyJ350

8 жыл бұрын

Most install shops will carry them or they can order it for you.

Hey man can you do an install on the rear speakers in a 350z? Ive had speakers for the rear in mine but I am too afraid of breaking something.

@AnthonyJ350

8 жыл бұрын

+Jacob Williams I already did mine but a lot of people are asking for the video, so I'll see if I can get one of the local guys to come in and I'll do it for a discounted price for a video.

@AnthonyJ350

8 жыл бұрын

+Jacob Williams You're in luck. I was able to get a local guy to bring in his 350Z so I'll be doing a video on the rear speakers this upcoming Thursday.

@jacobwilliams3938

8 жыл бұрын

+AnthonyJ350 awesome thank you so much! Ive heard they are hard. So thanks I can't find any videos for a Z.

@AnthonyJ350

8 жыл бұрын

+Jacob Williams You asked for it, now you got it. kzread.info/dash/bejne/immEl5qrlrCzZMY.html

What are your thoughts on how the door panel speaker grill doesn't really line up with the speaker? Looks to me like only about half the grill is even over the speaker. I used fast rings on mine and I'm happy with the sound I get, but I can't help but think that some of the sound is getting trapped in there.

@AnthonyJ350

7 жыл бұрын

Jeremy Schank If you want it to line up better you would have to 3D router a speaker adapter to give it an angle or do a custom grille on the door panel itself aligning with the speaker. If you want to test listen to it with the door panel off and see if you hear a significant difference.

@jjszx6r

7 жыл бұрын

Yea i listened to it with and without the door panel and honestly couldn't tell much of a difference. I was just curious what your thoughts were on that situation since I am a newb in car audio lol

@AnthonyJ350

7 жыл бұрын

Jeremy Schank I think If it had an angle on it toward the listener you can get some better imaging. Bit then fitment may become an issue you'll have to overcome.

Did you need any speak mount adapter for the front door speakers or wire harness adapter for the front door speakers ?

@AnthonyJ350

2 жыл бұрын

Yup, I show it in the video.

What's your take on the rear speakers alot of people say it's a waste of money

@AnthonyJ350

6 жыл бұрын

I definitely don't focus on them. If there is a limited budget I always focus on the front and adding acoustic material. In a lot of vehicles the driver can't really hear the rears properly.

Do i need to have an external amp if im adding new comp speakers? Like i have a stock sound system and im tryna upgrade it and bought a set of rockport comp speakers. Really feel like i messed up not buying an amp the more i read

@AnthonyJ350

5 жыл бұрын

How much power do your speakers need (RMS watts)?

@antonio-ry9tc

5 жыл бұрын

AnthonyJ350 40 rms watts i got rockportR165-S

Hi, I just bought my 350z but I just blew one of my speakers up. I see you have a few sponsored on your page, my question is are these the stock market ones or after? I know the stock are terrible but I just want higher quality ones and I'm at a lose to finding good quality parts.

@AnthonyJ350

5 жыл бұрын

I used Hertz Audio in my car. I would suggest visiting your local car audio shop and listening to some 6.5" component speakers.

@koolaidshower

5 жыл бұрын

@@AnthonyJ350 thanks! I really want to do this myself and your video has given me a little more confidence that I won't blow it up trying

@koolaidshower

5 жыл бұрын

@@AnthonyJ350 any website recommendations for quality after market parts?

Were the speakers plug and play? Is the wiring for this easy?

@AnthonyJ350

6 жыл бұрын

CallMehDustyNinja I extended the wires a few inches and soldered onto the speaker.

Did you use the factory speaker wires from the 6.5 harness or did you run new speaker wires from the head unit / amp?

@AnthonyJ350

3 ай бұрын

I used the main factory wires and extended them a bit. I push a 100 watts RMS through them, no issues.

@zackgounden7802

3 ай бұрын

@@AnthonyJ350 thanks will do the same..🙏

What freq. is your HP filter and xover rate? Any vibrations? How much power? I've always heard the 350z has cruddy vibrations and poor midrange through the front door speakers and the best bet is to do custom kick pods made out of fiberglass completely bypassing the doors and sail panels all together due to their poor angles and SQ. In other words, how do your Hertz sound? lol

@AnthonyJ350

8 жыл бұрын

I know they angle down but I feel people are nit picky. Sitting that close can you tell the difference? The Hertz are big and with enough power the midrange is strong if you build up the door. I have the Hertz down to 50hz and I think I have a -6 dB slope at the amp right now. I did not turn on the HPF at the head unit or you compound the slope.

@AnthonyJ350

8 жыл бұрын

I do demo the car on my Facebook page in the video section

@wernerlab13

8 жыл бұрын

Anthony your super quick response to my question is terrific and thank you for posting such helpful videos btw! I might just do custom kick panels for midbass/midrange using DLS iridum 6.5" 70hz-2.5k, tweets in a custom a-pillar up high 2.5k on up, and after watching your video some 6.5" midbass only running 70hz - 250hz for some extra sound up front. No rear speakers. Anyway, great stuff man i just watched the dip stick video....great channel. subscribed.

@AnthonyJ350

8 жыл бұрын

+Johnny Werner (reker13) Thank you! Sounds like you're pretty experienced so it means a lot.

Great video! I'm getting ready to put new component speakers in my door as well, I do have one question, did you get an adapter for the stock harness? Or did you cut and solder the wires?

@AnthonyJ350

5 жыл бұрын

I cut and solder wires

@wdy7472

4 жыл бұрын

@@AnthonyJ350 Hi did you cut thre wires on the door or before the door ? is still stock wires bro your player ? Thanks

@AnthonyJ350

4 жыл бұрын

@@wdy7472 I used the stock wires and I'm putting 100 watts RMS through them for the speakers through an Alpine PDX V9 five channel amplifier.

@wdy7472

4 жыл бұрын

@@AnthonyJ350 Thanks for the reply does the cable enough strength power to the speakers ? does it crack when you play it loud ? Thanks

@AnthonyJ350

4 жыл бұрын

@@wdy7472 No it works perfect, you just need to make sure your amp can supply the speakers enough power

Thanks for the video, very informative. Where did you get the 1/2 inch spacers that have a wide enough inside diameter to go over those Hertz speakers?

@AnthonyJ350

8 жыл бұрын

+Nickels Worth I work at an install shop, so we carry Metra's speaker spacers. I did have to router them out a bit because the Hertz speakers are quite large.

What's the difference between Dynamat and the sliver/chrome sound deadening that you install later on the door panel ?

@AnthonyJ350

5 жыл бұрын

I used Stinger Roadkill here. I still believe Dynamat has some of the best dampening properties, many people say they're all the same but I've had the opportunity to test different types back to back.

@AnthonyJ350

5 жыл бұрын

Just depends on how much you want to spend.

@Shad0w1383

5 жыл бұрын

@@AnthonyJ350 thanks for the quick and clear answer 👍

hey Anthony, can you list the products used in this video

@AnthonyJ350

4 жыл бұрын

The speakers aren't available anymore, but the speaker adapters and sound deadening would be at your local installation shop.

did you run your speaker wire through the stock loom or did you drill a hole in the door? I ran mine through the loom.

@AnthonyJ350

7 жыл бұрын

Tom R I'm not running that much power so it's the stock wiring for the most part.

@tomr1107

7 жыл бұрын

cool. sick speakers btw.

@AnthonyJ350

7 жыл бұрын

Tom R Thanks! Ya they're very clear and produce a good amount of mid bass.

F.a.s.t. Foam rings did you cut them down at all? If so, how much did you take off the top? Or how much did you leave available?

@AnthonyJ350

8 жыл бұрын

The foam around the surround I didn't cut down.

@AnthonyJ350

8 жыл бұрын

Huh, that rhymed a lot.

could you use Styrofoam in place of the wave breaker?

@AnthonyJ350

Жыл бұрын

I think it would reflect.

Hello, my question to you is do you know the part # for that thick foam you used around the speaker(the one between the door panel and the speaker)? Thank you.

@AnthonyJ350

8 жыл бұрын

+Valentin Reinis I would just try to find the equivalent foam tape for whether sealing at your local hardware store.

@valentinreinis8325

8 жыл бұрын

+AnthonyJ350 is that a tesa brand? becasue our shop gets some stuff from them. I jist never seen this product and it looks like it could bump us up to the next level of install 😊

@AnthonyJ350

8 жыл бұрын

Valentin Reinis It said TESA on the release paper, but I have no idea where it was from. I just had it laying in my shop. Cause I think it's the same result but cheaper than fast rings.

@valentinreinis8325

8 жыл бұрын

+AnthonyJ350 yea fast rings are over priced. would by any chance have a part # or was it just shop mats laying around?

@AnthonyJ350

8 жыл бұрын

Valentin Reinis Sorry, no numbers on it. I was using whether stripping tape from Home Depot and that seemed to work well too. Just not a lot of variety on height.

Does the 350Z have a Quadraphonic speaker setup as most cars do?

@AnthonyJ350

8 жыл бұрын

+Khyree Holmes Yes it has 4 speakers. Doors and 2 in the rear behind the occupants. Some are also equipped with a factory sub.

@Khyree_Holmes

8 жыл бұрын

+AnthonyJ350 I always wondered since its a 2 seater car.

as if not run active front stage with such nice speakers

Do you think those are better than the stock Bose? I tried some 6.5s for my rear speakers from Best Buy (kenwood) and my Bose were the same if not slight better

@AnthonyJ350

5 жыл бұрын

These are way better. The BOSE system isnt clear. You will need am aftermarket amp and sub to hit their potential though

@rrrrrafaell

5 жыл бұрын

AnthonyJ350 yeah that’s what I have Kicker sub and amp and it sounds pretty good. Then I decided to try the Kenwood concert series speakers and they were the same as the Bose. I want something more clear, unfortunately once I reach a high volume the distortion is pretty bad with those (I use Pioneer SPH da120 radio)

@AnthonyJ350

5 жыл бұрын

@@rrrrrafaell That's because you used the BOSE amp, you have to bypass it

@rrrrrafaell

5 жыл бұрын

AnthonyJ350 I never had the Bose ones. I bought them for the quality but I had the regular speakers before the Bose and now is an aftermarket amp. Do you know any solution to fix that? I’d appreciate it!

@AnthonyJ350

5 жыл бұрын

@@rrrrrafaell Are the new ones mounted in an adapter and sound deadened like in the video?

great video. I'm thinking of doing this exact install in my z. what amp are you driving the front speakers with and where did you mount it? also, are you using the rear speakers? I've read a lot of posts where people have disconnected them. thanks!

@AnthonyJ350

8 жыл бұрын

+j pugs I'll be using Alpine Electronics' INE-W967HD head unit and their PDX V9 5-channel amp mounted in the glove box. That way it's hidden and easy for me to tune whenever I want. For speakers I'm doing an odd setup where I'm only using the woofers from the Hertz High Energies and I'm tuning them to only play mid range bass frequencies. So I'm stage the car from the rear to play roughly 70-60 hz and below, the middle will be on a HPF to 60 but I'll cut it off so it doesn't play anything really high and the front will play from 60HZ all the way up. I've never done it this way stage a vehicle progressively like that so I figure I'd try it.

Did the ohm difference make it quieter?

@AnthonyJ350

Жыл бұрын

With just the factory head unit yes. But I went to a 5 channel amplifier pretty much right after because that was the plan.

@z33hayden23

Жыл бұрын

@@AnthonyJ350 ah, ok

I have a project for us Z guys and girls since the door is exposed is installing side merror blinkers wiring and installation

@AnthonyJ350

3 жыл бұрын

Let us know how it goes!

can you use styrofoam instead of the wave breaker mat

@AnthonyJ350

7 жыл бұрын

Maybe, never tried it. The Wavebreaker has a really good adhesive and conform to the contour of the door easily while the styrofoam is likely to crack. The styrofoam might also be too hard of a surface not absorbing the back wave.

Can you post the bracket and spacers you bought?

@AnthonyJ350

2 жыл бұрын

You can get them from your local install shop.

Would be nice to add a list of what you used

@AnthonyJ350

4 жыл бұрын

Is it the speaker adaptor you're asking about or literally everything?

What's the name of the speaker spacer for the 350z

@AnthonyJ350

7 жыл бұрын

Omar Castaneda You can search Nissan speaker adapter. They're on Metra.

How long does this process take?

@AnthonyJ350

6 жыл бұрын

You Is Dumb I spent most of the day on it. Mainly cause I was making the video and being really thorough

What size speaker wire do you use? What brand wire do you recommend? Thanks

@AnthonyJ350

6 жыл бұрын

Tyler Lesko I used factory here with 14 gauge I think. 12 gauge you're usually fine for more applications.

@tylerlesko5895

6 жыл бұрын

AnthonyJ350 and should you use component speakers only in front then coaxial speakers in back of the 350z?

@AnthonyJ350

6 жыл бұрын

Tyler Lesko That's what I did.

@tylerlesko5895

6 жыл бұрын

AnthonyJ350 okay thanks. One more question. What do you recommend for amplifying the four speakers but i also want to wire a 10” sub

@AnthonyJ350

6 жыл бұрын

Tyler Lesko Alpine PDX V9 five channel amp is my go to piece.

what inch size speakers go in the doors if these?

@AnthonyJ350

7 жыл бұрын

Zion! Ghosts Commentator! 6.5" with proper adapter/ spacers.

@TeMpAImPulse

7 жыл бұрын

AnthonyJ350 do you have to have an adaptor ? can't they screw right into the same spot the factory ones were in? cheers

@AnthonyJ350

7 жыл бұрын

Zion! Ghosts Commentator! That's why you need the adapter so it lines up with the factory holes. You see me use them in the video.

@TeMpAImPulse

7 жыл бұрын

AnthonyJ350 isn't the adapter already on the factory speaker tho so i don't need to worry about it, just swap the speakers over?

@TeMpAImPulse

7 жыл бұрын

oooo never mind aha, just seen. i need to buy an adaptor to suit

Where can i get those speakers adapters?

@AnthonyJ350

5 ай бұрын

Amazon will have them

1:30 the previous owner of my 350z put a bolt in the bottom handle part .. it's too long to get with a socket.. dunno what the heck he did there.. fortunately, i was able to remove the grille ..i'l put the new speeekerz from there..

@AnthonyJ350

6 жыл бұрын

klepetar That's sounds like it was annoying

Hi Anthony. do you think it would make much of a difference drilling out the rest of the holes on the speaker grill or cutting out the center and wrapping it with speaker cloth ? Thanks for the how to videos & putting up with some of the clowns that comment on here

@AnthonyJ350

7 жыл бұрын

Funny you say that because I tried drilling them out more but the plastic didn't drill out clean so I cleaned up what I drilled. I would drill them out sand it down and then cover in a grille cloth that matches your door colour. The reason I don't suggest cutting it out is in the real world someone might end up pushing through the cloth damaging the speaker.

What is that pointy plastic piece called ? @ 7:46

@AnthonyJ350

4 жыл бұрын

They're often called "sail panels".

What year is your 350z?

@AnthonyJ350

8 жыл бұрын

Mine's 2006. You can see more pics of it on my Instagram.

What size are the tweeters?

@AnthonyJ350

3 жыл бұрын

Here's the specs on the speakers www.hertzaudiovideo.com/car-audio-speakers-system-hienergy-hsk165/

What did you use to mount the crossover?

@AnthonyJ350

3 жыл бұрын

In the door

@LtLongle

3 жыл бұрын

@@AnthonyJ350 what is sticking it to the door?

@AnthonyJ350

3 жыл бұрын

@@LtLongle screws through the the sub inner sheet metal panel. Grease on the other end to help prevent corrosion.

@LtLongle

3 жыл бұрын

@@AnthonyJ350 gotchya. Thanks

@AnthonyJ350

3 жыл бұрын

@@LtLongle You're welcome.

was this car a factory bose?

@AnthonyJ350

2 жыл бұрын

No it was a base sound system. Car is an enthusiast.

Where do you get the spacers

@AnthonyJ350

4 жыл бұрын

You can get them at your local install shop.

dude,, have you done an engine clean video on you 350z,?

@AnthonyJ350

7 жыл бұрын

aaron napoles No but I'll probably do one on my truck soon

@karbonbon69

7 жыл бұрын

AnthonyJ350 k,, I've been looking for one on a 350z that's why I asked,, I want to clean mine, and since you have plenty of vids on 350z's I though you had done one.

@AnthonyJ350

7 жыл бұрын

aaron napoles You could do what other people do on other cars. Just cover the electrical components with plastic bags.

Who makes that panel remover.

@AnthonyJ350

6 жыл бұрын

12vtools.com/

That baffle you bought KILLS all bass. You should remove that from behind the speakers. Edit: sorry, didn't notice you cut them at the bottom.

@AnthonyJ350

7 жыл бұрын

Paweł Be Yup that's what we found out to address that problem. Cut them open.

@bilazaurus2759

7 жыл бұрын

I'm thinking about routing cables to the woofer but after I saw how risky it is, I think I'm good with how it is though knowing how thin OEM wires are.....

@bilazaurus2759

7 жыл бұрын

Geeeez. I've just noticed I wrote the same comment a year ago :D

@AnthonyJ350

7 жыл бұрын

Paweł Be I run 100 watts rms through the factory lines. That's the most I'm willing to run through them.

Is that just the foam strips from the hardware stores??

@AnthonyJ350

8 жыл бұрын

+Andrew Oliver I've used that from the hardware stores and seems to stick well. Just have to get the appropriate height.

@andrewoliver9686

8 жыл бұрын

+AnthonyJ350 I'm gonna get some this week. You've convinced me to get some Alpine type r components last week. Can't wait to put them in!

@AnthonyJ350

8 жыл бұрын

Andrew Oliver Niice! Let me know how it sounds. You're putting in sound deadening right?

@andrewoliver9686

8 жыл бұрын

+AnthonyJ350 Absolutely... this vid will be by reference

@AnthonyJ350

8 жыл бұрын

Andrew Oliver Awesome! That's what I like to hear!

Could you message or reply to me a list of the exact products you used? thank you

@michaelzosa2759

6 жыл бұрын

specifically the spacer used/adapter used? thank you dude. great work

@AnthonyJ350

6 жыл бұрын

Michael Zosa You can email me at info@gofasthavefun.ca and I'll reply with the parts list. I used speaker adapters from Metra. Your local install shop can get them for you.

Wish you showed the wiring... great vid but that was the main thing needed

@AnthonyJ350

3 жыл бұрын

Thanks for the feedback!

@esperxecho4134

3 жыл бұрын

@@AnthonyJ350 would u consider making a wiring instruction video? another great video idea would be doing the bose harness to aftermarket amp thats in the rear of the trunk... absolutely noone has a video on this specifically on the 350z where alot of people need it most!

@AnthonyJ350

3 жыл бұрын

@@esperxecho4134 Maybe if I every work on a 350Z to do that job. I just do generalized concepts to give people ideas on best practices. I don't want to give away too many trade secrets and take away from my peers. If a job is too technical to figure out, I highly recommend visiting your local installation shop.

Why crossovers mounted in door?

@AnthonyJ350

8 жыл бұрын

+SeanOMatic The tweeter and mid range woofer are all located in the door so it only makes sense to mount the passive cross overs in the as well to keep the wire runs simple and short.

@SeanOMatic

8 жыл бұрын

AnthonyJ350 Got ya. I normally install my crossovers in kick panels or with the amp in the trunk, but I can see cost/time being a consideration.

Can you link the foam tape you used?

@AnthonyJ350

6 жыл бұрын

I switched over to using FAST Rings for acoustic material kzread.info/dash/bejne/rKytprh9lcbVmqw.html

@brycekiesel

5 жыл бұрын

Oh cool. I didn't even see your comment until now, and I have already ordered some of those. I do have another question though. What was the approximate depth of your adapter and spacer together? You mentioned that your spacer was 1/2 inch I think, but I couldn't find out how deep your adapter was. Also what kind of speaker gasket tape do you use? Thank you so much!

@AnthonyJ350

5 жыл бұрын

@@brycekiesel I think I was close to an inch when done. I use FAST rings now for a gasket.

@AnthonyJ350

5 жыл бұрын

Here's the video I made using FAST Rings kzread.info/dash/bejne/rKytprh9lcbVmqw.html

@brycekiesel

5 жыл бұрын

So if I currently have a 3/4 inch adapter should I get a 1-inch spacer or a .5 inch spacer? When I said gasket tape I was referring to the really thin stuff you would put between the door and adapter or adapter and spacer to reduce a slight amount of vibration.

where can I get that metal panel removal tool you use? Thanks!

@AnthonyJ350

8 жыл бұрын

www.12vtools.com

@TheStpeteboy

8 жыл бұрын

appreciated! Thank!

And that's how you install a pair of $600.00 dollars speakers , Squeeze all the juice out of those Hertz . Not over done just the right amount of sound deadener.

@AnthonyJ350

8 жыл бұрын

+juancmendez38 Yup, you don't have to cover every square inch especially with a door like this with a relatively good seal. Trying to show all these Tuner guys you can have a sound system without adding much weight at all.

just bought a set of rockport components and this looks complicated asf lmao not lookin forward to the install

@AnthonyJ350

4 жыл бұрын

You could pay an installer like me instead ;)

You didn't show how you spliced the speakers in thk that's what I needed to know you said you were.

@AnthonyJ350

3 жыл бұрын

I have this video kzread.info/dash/bejne/dKab1NSenrvNp7Q.html

Longest 5 minute video ive ever watched

@AnthonyJ350

4 жыл бұрын

Well we appreciate you watching!

pioneer avic-8100nex front 2 Alpine SPR-60C 6.5" Component Two-Way rear 2 Alpine SPR-60 6.5" Type-R Coaxial amp for the speakers MTX Thunder 75.4 2 amp for 2 subwoofer mtx thunder 1000.1 at ohm and 2 JL Audio 10W6v3‑D4 10" in a sealed box i have pictures if you want i can sended to you all my wire is stinger 0 gauge and 4 gauge i have for power xp 1200d secondary battery xs power xp 950 i take some of your ideas thanks you for all your videos

@AnthonyJ350

8 жыл бұрын

+Omar Ortega Niice! Ya you can e-mail me at info@gofasthavefun.ca

how much would this cost ?

@AnthonyJ350

7 жыл бұрын

Retail on the speakers is around $500 plus plates and sound deadening material. Ball park, $750 in parts and material.

@pushhrodd01

5 жыл бұрын

@@AnthonyJ350 jesus christ that much? I got kicker speakers for less than half of that

@AnthonyJ350

5 жыл бұрын

@@pushhrodd01 It's Canadian pricing if that helps.

Didn’t get to see how to take off harness for led lighting cup holder?? 🙄🙄

@AnthonyJ350

4 жыл бұрын

Just unplug it.

The Bose is good enough I have one

@colsutd1663

4 жыл бұрын

no...

Apart from Nissan fucking up Tweeter placement, this is a great video

@AnthonyJ350

8 жыл бұрын

+jody024 Thanks!

@jody024

8 жыл бұрын

AnthonyJ350 BTW: where did you buy that panel removal tool ?

@AnthonyJ350

8 жыл бұрын

jody024 12vtools.com/

@jody024

8 жыл бұрын

AnthonyJ350 Thank you

I don’t think i need new speakers anymore 😬

@AnthonyJ350

2 жыл бұрын

Yes you do! You can put in smaller 6.5" like JL Audio C1s or C2s and use just one speaker adaptor.

@Hazy4oo

2 жыл бұрын

@@AnthonyJ350 i don’t wanna break something incase i do a trade soon thank you for tha advice tho 🙏🏽

Why put such a powerful speaker in the door without amplifier? The hu is not powerful enough to drive those.

@AnthonyJ350

7 жыл бұрын

Because I added a PDX V9 in a later video.

@DROIDRAZR16

7 жыл бұрын

ok that makes sense. Do you have another amp for sub?

@AnthonyJ350

7 жыл бұрын

DROIDRAZR16 Nope I run a 5 channel. If you search my 350Z Playlist you can see the completed system. And I play the system on my Facebook page.

U wanna do that to my speakers lol

@AnthonyJ350

8 жыл бұрын

+Alex Borici Sure! Just gotta pay me :)

@350zgang8

8 жыл бұрын

+AnthonyJ350 rather do that then pay someone that will prob fuck it up lol

@AnthonyJ350

8 жыл бұрын

Alex Borici Ya even though I show you the steps, most local people just pay me to do the work because it's second nature for me and I take care of the cars. For a small fee it's worth the workmanship.

Don't use these closed speaker baffles. If you know how drivers work you'll know these baffles will destroy your bass

@AnthonyJ350

8 жыл бұрын

+Paweł Be (Bilazaurus) You did see the part where I talked about cutting most of it out and just using the top as a water shield right? To avoid the issue you comment is about. If I left it closed, what's the point of the Wave Breaker behind?

Position of the tweeter is very horrible

@AnthonyJ350

8 жыл бұрын

+AutoStudio Нальчик But that's the factory location. I didn't feel like spending 4 to 5 hours building pods and then they'll weigh a lot and it's the smalled ball and socket design holding these in. And I haven't decided if I'm going to do gauges on my a-pillar so I can't mount them there yet.

@jewllake

8 жыл бұрын

+AutoStudio Нальчик critical comment with no justification and good input to back it up.

@hamiduca

8 жыл бұрын

+jewllake tweters are for ears,not for legs

@jody024

8 жыл бұрын

+AnthonyJ350 Pods aren't that heavy....

@AnthonyJ350

8 жыл бұрын

+AutoStudio Нальчик The tweeters are positioned at head level. I mean you can hear their definition just fine. Now maybe the way it got captured on camera you may think they are angling down for some reason as tweeters are very directional. Rest assured they're not. But what do I know right?

You talk too much

@AnthonyJ350

7 жыл бұрын

David Melgar That's why people watch me. Would you prefer a slide show with text? Ahh I know you're one of those impatient people that want me to read your mind and give you what you want to know in 30 seconds. I bet you goggle everything instead of trying to figure it out too. Merry Christmas!