Nissan 180sx | R33/Z32 Drum Handbrake Conversion
Автокөліктер мен көлік құралдары
In this video you'll see how to install an R33 and Z32 Drum Handbrake Conversion on a Nissan Silvia s13/s14/s15, 180sx, 200sx and 240sx!
This R33/Z32 Drum Handbrake Conversion is a very popular choice in the drifting world allowing improved initial bite and faster lockup to get you started going sideways!
Пікірлер: 21
Thanks man! Helped me get my handbrake assembly together!!
@DeeJayZeee
2 жыл бұрын
No worries man glad it helped! It can get tricky haha 👍🏽
your workshop is so neat
@DeeJayZeee
3 жыл бұрын
Haha thanks! Always try stay ontop of it 👌🏽
Nice clear instructions thanks man doing this mod to my s14cin next few days
@DeeJayZeee
2 жыл бұрын
No worries man! Glad I could help ✌🏽
@zenkisilvias1428
2 жыл бұрын
@@DeeJayZeee have you installed your rotors yet?
@DeeJayZeee
2 жыл бұрын
@@zenkisilvias1428 Nah not yet I ran into a problem with my rear knuckles haha I have an s14 rear subframe with s14 arms and knuckles but I’ve just found out that I need to use s13 rear knuckles.. so I basically have to undo everything I’ve done in the rear 😅
@zenkisilvias1428
2 жыл бұрын
I hope I don't need to replace anything as it took me so lonnnnng to find the drum brakes alone 😒 I'm running an s15 rear subframe in a s14 and r33 5 stud hubs (been told) but currently running the factory single pot s14 calipers
@DeeJayZeee
2 жыл бұрын
@@zenkisilvias1428 Yeah you should be fine, just have to check the spline count on the new hubs match the spline count on your axles 👍🏽 Only reason I have to go back and change my knuckles is cause the s14 knuckle coilover mount is different and the coilovers won’t seat properly Are you upgrading to r33 rotors/brakes while your at it?
So the hub needs no modification, the r33/z32 handbrake assembley fits onto the s14/s15 hub, you put everything in place and the brake disc for the foot brake gos over the handbrake shoe assembly correct? Let me know if i understand correctly.
Thanks so much man
@DeeJayZeee
2 жыл бұрын
No worries man 👍🏽
My handbrake leaver stop clicking and staying up. Any ideas?
You made that look to easy!
and then do you just put your normal silvia hub back on and its good to go ? so technicaly you can pull the drum handbrake stuff from a 4stud 33 aswell even if your silvia is 5 stud???
@DeeJayZeee
2 жыл бұрын
I’m not 100% sure about that one sorry, might have to do some digging in forums. I’d say mainly make sure your rotor to suit 4 Stud hub fits over the r33 handbrake assembly.