Thank you for this great video! I just bought this camera and thought I was doing something wrong on the tripod. It all makes sense now! Just ordered it on Amazon. I spent a little more though as I opted for the one with the two thread options on the bottom. Thanks again! 😊

thanks for the tip i just got my p900 yesterday and noticed that about the mounting point

Thanks for your demo, I now have one fitted to my P900, very pleased, got it through eBay. Thanks again.

@DaleMrDSimmons

5 жыл бұрын

Ivor Mendes you are welcome. I use mine constantly. Thanks for watching.

That's going to prove very useful, I bought it just now!

Thank you so much for this video. It is far superior to anything I have seen on You Tube. Enjoyed your comments & have now purchased this nikon ring to improve my videos.

@DaleMrDSimmons

4 жыл бұрын

Shelley Faigle I’m glad I could help. It really will help. Thanks for watching

I know I’m a few years behind but I have a P900 on its way… And all the components for a support ring! Thanks for the video. The DSLR I shoot with is a 14 yr old model and it’s rare I have a current model of anything, but I live within my budget. Thank God information lives on the internet forever. Lol

@DaleMrDSimmons

Жыл бұрын

Congrats on your P900. You will enjoy it.

Nice simple video.Thank you.All the best from Cork

Thanks for this demo , i have this P900 and thought it was wrong too, I hope to get this now. Thanks

@DaleMrDSimmons

6 жыл бұрын

Ivor Mendes you are welcome, mine really never comes off. Thanks for watching.

thank you! I thought it was my tripod. I'll try this. Would not have bought this model had I known this.

Great thanks. Very good instructions and mine collar fits perfectly in my P900.

I had same problem. My tripod fall with my nikon , and tripod mount was broken wider than one in your video . thanks a lot. JBU

Thanks a lot for the amazing video, I have one p900, its not broken (yet) but I will get one of this probably it will help with the vibration when you press the button.

Thank you so much Dale. This helped me keep my p900

@DaleMrDSimmons

3 жыл бұрын

You are welcome. Thanks for watching

Thanks its worth full information for me few months befor am buy this camera right now plan to buy tripod after search lot this video help nd save my dream camera damage i think.... Thank you 😊

@DaleMrDSimmons

5 жыл бұрын

saravanan s you’re welcome. Thanks for watching.

Thanks for that video-much appreciated Sir!

@DaleMrDSimmons

6 жыл бұрын

Barry Hyder you’re welcome. Thanks for watching

I use a rotating tripod collar with mine also, but the problem I have is with the lens drifting downward when zoomed out. It doesn't seem to matter if I'm shooting vertically or horizontally, the lens always wants to drift downwards. Brand new locking ballhead with a Kirk Enterprises quick release and plate. The Kirk plates for other camera models have a lip at the rear so that there is no drift, but they don't make a plate specifically for the P900.

Thanks, was very helpful

VERY INFORMATIVE AND GREAT TIP!! Thanks from me as well!! Actually i´ve been looking for another Help, how to stabilize the Cam by full Zoom OUT, like filming Planes go fast by but may be NOW, that Problem may even be solved all the way??

I bought this ring attachment because of this video and its amazing 10/10. My primary rig is the p900 w/ the ring mount (now) that connects to a ball joint attachment on my monopod giving an impressively noticeable difference in stability. Without the ball joint the camera is stationary on the monopod which is only good for things directly in front of the height of the pole. The ball joint gives the ability to shoot high, low or tracking subject. The combination with the increased stability of the ring Mount with a tripod, monopod or otherwise it’s a must have for the P900.

great videos! wonder if you have one on replacing the lens glass cover which is cracked in my coolpix p900 / Thank you

Thanks for your help on this. thumbs up

thank you, just ordered my "ring"

@DaleMrDSimmons

5 жыл бұрын

Linda Doup You’re very welcome. Enjoy Thanks for watching.

Thank you for this video Sir

Ty for you information just got p900 and I'm new to photography but that was the first thing I didn't like 😉

@DaleMrDSimmons

5 жыл бұрын

Jon Parkes you’ll love it but I do recommend the lens support ring. Thanks for watching.

I have experienced the damage as well on my p900. Sent it in for a warranty claim as it was only 7 months old and Nikon tried to deny. I complained as I have had many camera's and never had this happen before. They wanted $285 to fix it but after my complaint, they said they would repair it under "good will" I agree it is a design flaw. I will be getting myself one of these ordered up today.

@DaleMrDSimmons

5 жыл бұрын

Todd Fynn bummer you had the problem. The tripod lens mount will really help. Thanks for watching

This is a neccesity as the base mount for the tripod is far too small and weak. The example shown in the above video where the mount rips off shows exactly what happened to me. Hope you don't have the same repair problems as I did as Nikon's customer support is the worst I've ever experienced, really poor, so I'd recommend the support ring. Thank you, Dale. Strange how the P1000 has changed it's design. Could it be they now recognise the problem that a lot of people have had with the P900? More than likely

I wish you would have given a link to this part

thank you

Hi everyone, last night I broke the support with the screw of my Nikon P900, what a mess Nikon made this thing 😏. I am very happy to have seen this video. thank you so much 😃😍

@DaleMrDSimmons

8 ай бұрын

You are welcome.

Omg, my son broke my thread out of my camera. I ended up buying a new camera. But after seeing this video, I am excited about my Nikon P 900 again. Now I can use it again. I order the ring tonight. Thank you so much for posting this video.

P900 lens mount i put 2 rubber bands on the camera and the mount holds great

Thanks cool 👍

I have the P-1000 and I use the Manfrotto 293 on my gimball when I make long haul photography

Thanks old bro

The P950 mount is in the center line, and move somewhat forward. Q. Do you think it'd be still better to use a Lens support ring? Many thanks.

@DaleMrDSimmons

3 жыл бұрын

I still think it would be a good thing to have.

Thx for this video, I am have the same camera👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Good!

Thank you, wish I had prior knowledge....same happened to me. #stayflat #p900

@synthguy1881

4 жыл бұрын

agreed. Wish I know about this befroe it happened. I would have had second thoughts

great video, ive just got a p900 ,and ordered one of these rings

@DaleMrDSimmons

4 жыл бұрын

leslie fox Thank you, it really works well. Thanks for watching.

My tripod mount also broke in half and nowi cant use it, so this tipod mount should work for me. MyP900 is now 4 years old and working perfectly besides this falure

Thank you

@DaleMrDSimmons

2 жыл бұрын

You’re welcome

I did purchase the ring. No more duct taping the tripod mount to the bottom of my P900.

@DaleMrDSimmons

6 жыл бұрын

Dashbshots Great! I use mine constantly and with confidence. Thanks for watching.

Hi Mr D, love your vids & tips I purchased the support ring and it works perfectly, thankyou.. My problem now is heat haze at extended zoom. Is there a filter or any adjustments to my Nikon P900 that can be found to eliminate the haze?

@DaleMrDSimmons

4 жыл бұрын

Mark Stevens filters will not work with the p900. For haze reduction in postproduction use the highlight adjustment and clarity in Lightroom

@markstevens6673

4 жыл бұрын

@@DaleMrDSimmons Thanks Mr D

exact thing happened to my p900 but the whole socket snapped out, causing the camera to fall onto the hard floor broke the zoom on the lens. luckily it was insured.

Does the ring make much difference in stability when fully zoomed? Ie will the subject (stars/planets) be more stable? Or is it mainly the tripod?

@DaleMrDSimmons

5 жыл бұрын

Lexusant the ring is mainly used to evenly distribute the weight of the camera either zoomed or not. You mount the ring base to the tripod and it stabilizes the camera more evenly and reduces the strain on the 1/4 20 on the camera body.

@lexusant64

5 жыл бұрын

@@DaleMrDSimmons Thankyou

@DaleMrDSimmons

5 жыл бұрын

Lexusant You’re welcome and thanks for watching.

Thank you sir.I was concerned about the off set tripod Mount.

@DaleMrDSimmons

4 жыл бұрын

Mark Stevens You’re welcome and thanks for watching.

@markstevens6673

4 жыл бұрын

@@DaleMrDSimmons I recently bought a P900 yet to receive it but checking reviews. I discovered your Vids & am happy with my choice. Currently I'm using a Canon SX530. Nice camera but maybe inferior to the Nikon.

@DaleMrDSimmons

4 жыл бұрын

Mark Stevens The Canon is not inferior but is marketed for the standard vacationers and for casual use. The optics are in this case are purposely manufactured with a lesser grade glass to keep this unit in a lesser price point. I have the Canon SX 530 and the SX60 along with the P900 and P1000. In each you can tell the difference and it’s all about price point. Any manufacturer cannot put $1000 glass in a $300 camera. Hope that makes sense.

@synthguy1881

4 жыл бұрын

the tripod mount is a major design fault

I think it's a very good idea in theory. I'm not entirely sure if Nikon can move the tripod mount as you suggested. Won't the inner workings of the camera be in the way? I apologise, I'm not at all technically minded so I don't know.

@DaleMrDSimmons

5 жыл бұрын

Ashley Stubbings thank you for your comments. Nikon did move the tripod mount to center on the p1000

@stealthmanofthewoods2570

11 ай бұрын

@@DaleMrDSimmons j'ai un P1000 je confirme mais je trouve fragile et j'ai trouvé une autre solution kzread.info/dash/bejne/npqC2sd_gau4lrg.html

Same happened to me.

Great vid Sir thank you for info ✌

@DaleMrDSimmons

5 жыл бұрын

kobylee911 you’re welcome. Thanks for watching.

Thank you very much! I just wonder how put Velcro strip, using glue?

@DaleMrDSimmons

4 жыл бұрын

The Velcro I purchased was adhesive backed. Thanks for watching

@elenaprokudina7802

4 жыл бұрын

@@DaleMrDSimmons thanks!

Hi Dale, is this 80mm or 82mm ring?

@DaleMrDSimmons

6 жыл бұрын

Khalid Shaikh It would be 80mm. Thanks for watching.

This is great, even my P900 broke coz of tripod... :-(

@synthguy1881

4 жыл бұрын

same problem for me

Thanks for the video, I just ordered camera, support ring mount, and wall charger for the battery and the remote, I think I'm set

@DaleMrDSimmons

5 жыл бұрын

metal moss Thanks for watching. You will love that camera.

@Rebel1029

5 жыл бұрын

I've had my p900 for about 2 years now and you're going to love it!!!

Great video. Will this work with the P1000?

@DaleMrDSimmons

3 жыл бұрын

No, lens is too big. Thanks for watching

I got one but it to little it says Rt-1 70-200f4 for Nikon

@DaleMrDSimmons

3 жыл бұрын

Yup wrong one.

Any suggestion from where this can be bought in India.

@DaleMrDSimmons

4 жыл бұрын

Gaurav Srivastava no not that I’m aware. Thanks for watching.

will the support ring work on a p1000

@DaleMrDSimmons

4 жыл бұрын

scott haney No sorry it won’t.

i ordered one in june and it is still not delivered to me , 3 months is a bit long , if i had walked from holland to china then i would already have it lmfao

@robertgrummitt2963

5 жыл бұрын

That's the reason I ordered on Amazon and there was here within 2 days

Where buying in India....

Hi, will it also fit the p1000?

@DaleMrDSimmons

4 жыл бұрын

Andre Vermeulen no it will not. Thanks for watching

Where do you get this at

@DaleMrDSimmons

4 жыл бұрын

eBay

ARE THERE ANY LENS SUPPORT RING FOR NIKON P1000

@DaleMrDSimmons

6 жыл бұрын

khaled imam I really don’t think so. You would need to contact Nikon and ask for the lens barrel mm and go from there.

@khaledimam9172

6 жыл бұрын

ty for reply

@khaledimam9172

6 жыл бұрын

THEY DID NOT REPLY ME AND I REALLY IAM WORRIED ABOUT MY ORDER FOR P1000 AFTER I SAW YOUR VIDEO

@sadb1999

5 жыл бұрын

khaled imam The tripod mount on the Nikon Coolpix P1000 is dead center.

@andrewshumate6104

5 жыл бұрын

There’s still a ‘sagging’ problem with the P1000, though. When zoomed in, there’s a lot of annoying adjustments that need to be made.

Can I use 70-200 mount

@DaleMrDSimmons

3 жыл бұрын

It will not fit

2024 i bought a used one and it broke thanks for this video

@DaleMrDSimmons

5 ай бұрын

You are welcome

I use a support ring from CANON. Here is the detail: Metal Tripod Collar Mount Ring for Canon EF 70-200mm f/2.8 L IS USM Lens This ring have a 78mm inner diameter which fits nicely without any modification. Don't make the mistaken ordering the support ring for the 70-200mm F4 lens. This one is way too small.

Please send me details how to get it.

@DaleMrDSimmons

6 жыл бұрын

Prof.Kamal Karunadasa here is a link where to get it. Thanks for watching. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F272634250884

where did you get lens cap with string ? originally comes without 😉

@DaleMrDSimmons

4 жыл бұрын

Janis Locis - Paruskins Hi, you can get a lens cap leash off Amazon. A pack of 5 for around $5. Thanks for watching.

@janislocis-paruskins4121

4 жыл бұрын

@@DaleMrDSimmons but cap have no hole,this is only problem. You made a hole with drill or ? 😉

@DaleMrDSimmons

4 жыл бұрын

Janis Locis - Paruskins No, the leash comes with an adhesive disk which you apply to the front side of lens cap. The other end is an elastic loop which you fit over the lens.

@janislocis-paruskins4121

4 жыл бұрын

@@DaleMrDSimmons I have to look in amazon ,have no idea how without hole to fit. Thank you.

@DaleMrDSimmons

4 жыл бұрын

Janis Locis - Paruskins look up ChromLives Lens Cap Leash on Amazon

Can I use this on a p1000

@DaleMrDSimmons

4 жыл бұрын

Robert Alexander No, I’m sorry the lens is way too big circumference wise. Thanks for watching.

will it fit on all tripod s plates

@DaleMrDSimmons

5 жыл бұрын

TheNakedrat yes

@TheNakedrat

5 жыл бұрын

@@DaleMrDSimmons thanks

@DaleMrDSimmons

5 жыл бұрын

TheNakedrat welcome

But the problem with doing this causes the camera to now flex by now having the ring support all the weight and I dont like the horrible flex and very unstable and now harder to get focus and just wind will blow the camera out of focus using this. Its worse!!!! But I found the best way using both the ring mount along with a extra piece of metal also going to the stock mount on the camera, now it's very stable at any angle and no flex no issues at all wish I could post pics to show u how I did my homade mount but what I made has been the best thing ever for this camera by far!!!

@DaleMrDSimmons

4 жыл бұрын

paul kendall I have used this lens support ring for two years now and experienced no issues. I’m thinking if you are having focus issues it may be that the support ring attach screw is way to tight. If overtightened it can hinder the lens operation. But I’m glad you were able to get your camera supported to eliminate the 1/4x20 mount problem. Thanks for watching.

My P900 now has a hole where the tripod mount used to be.

@DaleMrDSimmons

3 жыл бұрын

Sorry that has happened to a lot of people. Yup, a real weakness they did address on the P950 and moved it to center camera. The lens support ring removes the stress big time

@sashaanddara

3 жыл бұрын

@@DaleMrDSimmons just ordered a lens support ring, now the wait. Cheers from Tasmania.

Can we remove the lens?

@DaleMrDSimmons

4 жыл бұрын

Mithun Mahesh no it is a fixed lens. Thanks for watching

@RealMithunMahesh

4 жыл бұрын

@@DaleMrDSimmons thank you

UPDATE ON MY SITUATION WITH NIKON SUPPORT: They are now ignoring my emails and not replying to my questions. If you can find an alternative way to have repairs done on Nikon goods I suggest you go there as nothing can be worse than the service I'm getting. I wish I knew then what I know now so in the future if I have any problems I will steer well clear of Nikon repair service

@DaleMrDSimmons

4 жыл бұрын

synthguy I’m sorry you’re having this difficulty. Many of the major manufacturers of cameras customer service fail to help post sale customers, or their costs are ridiculous. It infuriates me. Even little situations become difficult. A very good solution I found was Square Trade insurance. After the manufacturers warranty runs out they really shine. However, you are at the mercy of the manufacturers, even with Square Trade, until that runs out.

@synthguy1881

4 жыл бұрын

@@DaleMrDSimmons I only had the camera 20 days when that happened so they've had it longer than I have!

@

THANK YOU! I ordered the mount just a different brand but the same thing literally.. Here are my stills and video shots from nikon p900 with bad tripods or none at all! kzread.info/dash/bejne/ZYOhkqysdNXXgdI.html THANK YOU FOR THE TIP!

@DaleMrDSimmons

4 жыл бұрын

You are welcome. Glad I could help.