Nikon AF 80-200 f2.8D - fungus cleaning full tutorial

Supports the channel :-
Lazada Affiliate Links c.lazada.com.my/t/c.02Ih
whatapps us : www.wasap.my/60133938168
should you want to send your lens to us for cleaning and service

Пікірлер: 124

  • @olewetdog6254
    @olewetdog62542 жыл бұрын

    I'll just pay this guy. NO WAY I would attempt this and I think of myself as pretty good at this sort of stuff. Wow.

  • @khervie13
    @khervie132 жыл бұрын

    Finally found a video that shows everything on how to disassemble the whole lens. I have Nikon 300mm 2.8 with lots of fungus on it and been looking for some videos here on KZread. Thank goodness I saw your video, I hope i can do it the same as you did.

  • @awardfoto1

    @awardfoto1

    2 жыл бұрын

    Dit you manage to clean your 2.8 300mm ?

  • @davidfisher7781
    @davidfisher77814 жыл бұрын

    Excellent video! Clear and concise, with a great explanation along the way. Thanks!

  • @mevagisseymedic
    @mevagisseymedic3 жыл бұрын

    Thank you, I have to replace the manual / auto ring on the zoom ring as it has split, you have been able to show me nearly everything i need to do this repair.

  • @joshbunter825
    @joshbunter8253 жыл бұрын

    Thank you, I have been trying to find this level of information for a while. Super helpful and i would be keen for more videos like this.

  • @erenaknc8104
    @erenaknc81045 жыл бұрын

    Thanks to you, I fixed my lens!

  • @alejoniux
    @alejoniux11 ай бұрын

    Greetings from Cuba. Really helpful video!!!mine was full of fungus and now looks new. Thanks again!

  • @mikeno62
    @mikeno623 жыл бұрын

    It's great to see you working with lenses FotoSun, keep up the good work, you have a great KZread channel and I subscribe! Best regards :-)

  • @GreatWaterCircus

    @GreatWaterCircus

    3 жыл бұрын

    Wow Miken062 is a lens master ... good to see mutual respect

  • @melmrty
    @melmrty4 жыл бұрын

    Excellent video! Clear and concise, with a great explanation Thanks john 14:6

  • @pottiezluc8693
    @pottiezluc8693 Жыл бұрын

    PERFECT ! - Thanks a lot... from Belgium/Brussels...

  • @GreatWaterCircus
    @GreatWaterCircus3 жыл бұрын

    Brilliant vid and tut... thank you... have you a video on cleaning a 400mm Nikon 3.5 ED ?

  • @jeffrialisan3440
    @jeffrialisan34403 жыл бұрын

    Great video bro, the most complete tutorial i have ever watch.

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    Remember to support the channel. Subscribe ya !

  • @jeffrialisan3440

    @jeffrialisan3440

    3 жыл бұрын

    Sure Bro!

  • @ruigsantos
    @ruigsantos4 жыл бұрын

    Hi! Great video! Why did you attached the focus group to the front element before inserting them back in instead of putting in one at the time in the reverse order that you took them once, hence not needing the suction cup?

  • @jorgecosta5553
    @jorgecosta55533 жыл бұрын

    Wow... I have one with the same problem but not your skills to clean it... Awesome work and video

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    U can do it!

  • @amilcarrosales4074
    @amilcarrosales4074 Жыл бұрын

    💯🐐😍Excelente trabajo, Saludos desde Honduras🤩🇭🇳🇭🇳

  • @donaldshushack1244
    @donaldshushack12443 жыл бұрын

    Excellent video. It would be very helpful if you could publish a list of lenses you can clean and the relative prices. Thanks

  • @weekendgamer1094
    @weekendgamer10942 ай бұрын

    Great video man. Thank you.

  • @frando2479
    @frando2479 Жыл бұрын

    Hi there! Superb video :) Can you do one of the Tokina 80-200 2.8 ATX Pro as well? Thank you!

  • @MIUNSRV
    @MIUNSRV2 жыл бұрын

    Wow...excellent

  • @neilyakuza6595
    @neilyakuza6595 Жыл бұрын

    Holy that is beyond my skills, I will just send my lens in to you!

  • @FotoSunMY

    @FotoSunMY

    Жыл бұрын

    Hahaha... never try never know

  • @dalagangbukid7441
    @dalagangbukid74414 жыл бұрын

    Thanks man

  • @chriswilson937
    @chriswilson937 Жыл бұрын

    Hello FotoSun, I have watched your video a number of times getting ready to disassemble and clean this exact lens. I have some haze that needs to be cleaned. But while I have it apart, I also need to replace the M-A ring. Mine is cracked and taped currently. I have the parts and am ready, but since this wasn't one of the repairs you showed, I am curious. Is there any additional disassembly needed to put this new ring on when I get in that far? Any advice would be appreciated. Thanks for the great video. It's hands down the best one I have found for this lens' tear down.

  • @FotoSunMY

    @FotoSunMY

    Жыл бұрын

    I could not remember it, but as to replace the M-A, it shouldnt be difficult, just few extra screw. Record it, so u will not misplace

  • @9178855
    @91788554 жыл бұрын

    7:51 Lens got permanent damage

  • @kiyoshim9593

    @kiyoshim9593

    3 жыл бұрын

    no. that glass is really strong

  • @petermitruk1203
    @petermitruk12033 жыл бұрын

    Great video perfect explanation step by step 🙂👌 Id like to ask you if you have experience with disassembling and cleaning 300mmf 4 D ed.Thank you in advance

  • @FotoSunMY

    @FotoSunMY

    2 жыл бұрын

    No bro

  • @janmicomendoza3670
    @janmicomendoza3670 Жыл бұрын

    Thank you

  • @ravirajangam9599
    @ravirajangam95993 жыл бұрын

    When you put the front element back with the helicoid gear I am curious why you didn't put some helicoid grease in it.

  • @DejanMaleticDexter
    @DejanMaleticDexter4 жыл бұрын

    What is the price of replacing the manual focus ring with two metal plates? On my lens AF/M switch doesn't work every time and sometimes it slips.

  • @Getoffmycloud53
    @Getoffmycloud533 жыл бұрын

    Nice video, impressive to watch. Was hoping you could help me with a question regarding the front part of the lens body - it is held with two screws as far as I can tell. One of my screws is missing and now the front is not as tight as it should be. Do you know what size screw is needed to replace the original? I could try and remove the remaining one, but I am afraid this might lead to more problems.

  • @Getoffmycloud53

    @Getoffmycloud53

    3 жыл бұрын

    According to schematics it is a A2-20040fs screw - but try finding that one...

  • @user-zw2mn5mq8n
    @user-zw2mn5mq8n8 ай бұрын

    Nice

  • @musiclibraryforcreators8094
    @musiclibraryforcreators80948 ай бұрын

    Thanks

  • @user-go4lu4nr7p
    @user-go4lu4nr7p4 жыл бұрын

    Данные объективы можно юстировать ?

  • @Random_Number
    @Random_Number3 жыл бұрын

    This is a great video, but can I just send my lens to you? :D

  • @hungrycamperfilms
    @hungrycamperfilms4 жыл бұрын

    My d-ring doesn't move the aperture. What's wrong? I can't see any place that metal plate should attach so that it could move the aperture? AF-S D model.

  • @darrenwong25
    @darrenwong253 жыл бұрын

    Sir, i own a 80-200mm Nikon ED. Lens. Do not know why this lens only can Auto focus at the zoom range of 105mm. I seldom use this lens. And I attached it to my D600 Nikon body. Looking for you advise and thanks.

  • @ashrafulalam166
    @ashrafulalam1663 жыл бұрын

    Where is ur shop in malaysia? How much does it cost 70-300mm for removing fungus?

  • @johnchua5778
    @johnchua5778 Жыл бұрын

    How do I remove the focus group glass without dissamble all? The second layer of front glass

  • @drasp
    @drasp2 ай бұрын

    I’d love to know the specific model of spanner you’re using in the first step of this video. Affiliate link isn’t working. Anyone happen to know?

  • @moinulkarim3059
    @moinulkarim30595 жыл бұрын

    i hv also this lence bt my auto fucose is not working ..i need help how can i solve this problem

  • @MyJuancho2010
    @MyJuancho20104 жыл бұрын

    WHERE ARE YOU LOCATED?

  • @larrykillough7305
    @larrykillough73052 жыл бұрын

    Any advice on next newest model. The AFS with motor drive compared to this model?

  • @FotoSunMY

    @FotoSunMY

    2 жыл бұрын

    New version is much better

  • @sergeyv83
    @sergeyv8311 ай бұрын

    After reassembling everything now my focus ring doesn’t always engage in M I believe there is an issue with the pins and also in AF it won’t work at all, i can hear the motor spinning but doesn’t do anything. Any help?

  • @robertschmura8603
    @robertschmura86034 жыл бұрын

    Hi do you do repairs on Lens? I have a Nikon 80-200 D that need a new Aperture Ring..I tiny piece has broken off giving me an error when taking pics. I can fix it by adding a piece of tape but does not hold. Thanks bob

  • @FotoSunMY

    @FotoSunMY

    4 жыл бұрын

    U can try ur local Nikon service center first

  • @MrVikaswadhawan
    @MrVikaswadhawan3 жыл бұрын

    Hi. Need advice. Not focussing at infinity. Not even manually. Bought a used one.

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    U need to send to a service center

  • @lovefood6417
    @lovefood64174 жыл бұрын

    Could you please make a tutorial about cleaning fungus of Nikon 18-300mm?

  • @Helikopterpop

    @Helikopterpop

    3 жыл бұрын

    Optics with that zoomfactor are never good. I guess that you have variable aparture. Sell and buy new ones with smaller zoom factors and you will get sharper pictures with less blackouts. Just a tip:)

  • @MultiEdge540
    @MultiEdge540 Жыл бұрын

    Bonjour je viens de voire votre vidéo fantastique j'ai le af 80-200 et la lentilles avant qui a une griffe en vendez vous et à quel prix merci

  • @ivangabaldon9730
    @ivangabaldon97304 жыл бұрын

    Hello, thanks for the video! I have a question: If I only want to clean the second front element, is it possible to access it from the front of the lens, without doing the whole disassembly as you demonstrate? It's a little daunting to me to totally disassemble the lens, I fear I may not be able to put it back together properly. Thanks in advance for your help!

  • @FotoSunMY

    @FotoSunMY

    4 жыл бұрын

    Working from the front... If it reaches the glass effected... Then no need to open up the rest. Good luck

  • @ivangabaldon9730

    @ivangabaldon9730

    4 жыл бұрын

    @@FotoSunMY OK, thanks so much for sharing your knowledge so generously, I'll give it a try. Cheers!

  • @danc2014
    @danc20142 ай бұрын

    How does the fungus get inside so deep? the air is pulled in while zooming? How did you clean it with just a wipe? lighter fluid cleaned the lens but what kills the fungus?

  • @chainmoray7173
    @chainmoray71734 жыл бұрын

    Hi Fotosun. Great video. I am trying to remove the front element on my lens (the first step in your video) by unscrewing the retaining ring, but I appear to be turning the whole group rather than just the ring itself. (I am holding the focus ring while attempting this) I thing the retaining ring is stuck in its thread - do you have any tips on how to free this up?

  • @FotoSunMY

    @FotoSunMY

    4 жыл бұрын

    Try dripping some lubricant oil or WD40.. just few drops. After a while, try it. Or use a heat gun or hairdryer to heat up the ring. CoZ some ring are being gel together and the heat will help softer it

  • @chainmoray7173

    @chainmoray7173

    4 жыл бұрын

    @@FotoSunMY Thank you - I will give it a try

  • @homeassisttips261

    @homeassisttips261

    2 жыл бұрын

    Same thing happened to me.

  • @ThePlayonit
    @ThePlayonit3 жыл бұрын

    My 80-200 2.8 has a rattling clunking sound when the lens is shaken.. is this normal? Loved the video... thank you!

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    I dont think is normal.

  • @przemekparzysz3794
    @przemekparzysz37942 ай бұрын

    Can You put more movie with diferent lenses please ?

  • @risetteconsul5402
    @risetteconsul54022 жыл бұрын

    How do I contact you for a lens cleaning service?

  • @mevagisseymedic
    @mevagisseymedic3 жыл бұрын

    Hi FotoSun, simple question but what marker pen are you using please

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    Artline paint marker will be great

  • @neilyakuza6595
    @neilyakuza65954 жыл бұрын

    I would like to get my Tokina 80-200 ATX F2.8 cleaned there is haze in it. I am from Canada. What is the cost for the cleaning. Thank you.

  • @FotoSunMY

    @FotoSunMY

    4 жыл бұрын

    The shipping alone will be too costly

  • @adityadarmawan778
    @adityadarmawan77810 ай бұрын

    Hi there, I've lost my front element of this lens. The optical glass that you took out first when you disassembled this lens. Can you help me where can I buy one of those? Thankyou

  • @FotoSunMY

    @FotoSunMY

    10 ай бұрын

    Try ebay

  • @Greg-tj8rg
    @Greg-tj8rg4 жыл бұрын

    Nice video. Do you have any for fixing an auto focus that is non functioning? Would that just be taking it apart and realigning everything properly? I read someone claim that if the auto focus was not working and you just used the manual focus then the manual focus would soon stop working as well.

  • @FotoSunMY

    @FotoSunMY

    4 жыл бұрын

    This is a screw driven AF, so no motor on the lens. If the lens is with AF motor, then replace the AF motor is the only option

  • @Greg-tj8rg

    @Greg-tj8rg

    4 жыл бұрын

    @@FotoSunMY Oh right. Could you think of anything that would make the AF not work but the MF work on this camera? I guess the screw being damaged or something

  • @paulgoodall_

    @paulgoodall_

    4 жыл бұрын

    @@Greg-tj8rg I'm having to same problem now with this lens. Worked fine, then when I tried using it recently, no autofocus. Tried manual focus ring and that wouldn't work either. It just spins quite loosely and make a slight grating or crunching sound. Does yours do this?

  • @cesargabrielgomez9540

    @cesargabrielgomez9540

    2 жыл бұрын

    @@paulgoodall_ I have the same problem. When I look down to the lens, it looks like if it's loose. And makes a grinding and screeching noise when I try autofocus. Manual focus doesn't work either. Hopefully we can get an answer

  • @matskay1971

    @matskay1971

    7 ай бұрын

    I have an exact problem with the 80-200 D screwdriver lens . The autofocus works intermittently. Sometimes it works, sometimes it doesn't. But manual focus works fine. What could be the problem . Does anyone here know a fix for this problem . Many thanks in advance.

  • @ahmadnasir3681
    @ahmadnasir36814 жыл бұрын

    Hi..thank u for your video...did ur shop take lense services..?

  • @FotoSunMY

    @FotoSunMY

    4 жыл бұрын

    Yes. We do

  • @jessicacattoni7398

    @jessicacattoni7398

    4 жыл бұрын

    @@FotoSunMY I have this exact lens, and already sent it to a local shop to get fixed, but they said it was not possible. Can that be true? O Is it probably just too much work for them? And in if so, how could I send it to you? I think the phone number in your description needs an Area code too.

  • @raflismuhamed152
    @raflismuhamed152 Жыл бұрын

    hi bro..do u have a shop here in kl or pj?

  • @FotoSunMY

    @FotoSunMY

    Жыл бұрын

    Kuantan only

  • @BielAzlan
    @BielAzlan5 жыл бұрын

    Sy buka boleh.. Tp klau nk pasang mesti lupa... Hahaha

  • @Pentax67
    @Pentax674 жыл бұрын

    Oh my god ...! You are so brave ! It seems extremely hard . So much fungus !!!! I have a bag of Canon lenses they are infested with fungus (mostly cheap zoom 80-300 , 17-50 or so) I wanna throw it but now I think maybe I can sell 6 lenses for like 20$ maybe some one like you can clean

  • @FotoSunMY

    @FotoSunMY

    4 жыл бұрын

    U can do a garage sales on ebay !

  • @charakarasanga8465
    @charakarasanga84652 жыл бұрын

    Is it ok to remove the front part without removing other components? the outer front part that has the focusing scale and name plate.

  • @FotoSunMY

    @FotoSunMY

    2 жыл бұрын

    Yes. U can

  • @charakarasanga8465

    @charakarasanga8465

    2 жыл бұрын

    @@FotoSunMY thanks

  • @petrpokorny3504
    @petrpokorny35043 жыл бұрын

    Hi, how long and what temperature should I use on the hot air to heat the glue on the lens system?

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    Not exact temperature from my side. Hot enough for resin glue to start to deform.

  • @el166

    @el166

    3 жыл бұрын

    @@FotoSunMY I tried for a while about 30s 350 degrees with a hot air gun on smd components but the glue did not allow the temperature of aluminum could be so 50-60 degrees. No longer did I dare worry about lenses

  • @tarupam8133
    @tarupam81333 жыл бұрын

    Great vid.. We're you located sir?

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    Malaysia

  • @tarupam8133

    @tarupam8133

    3 жыл бұрын

    Any branch in SG

  • @tarupam8133

    @tarupam8133

    3 жыл бұрын

    And hm the service for like this sir

  • @tagagrande4095
    @tagagrande40955 ай бұрын

    No wonder its very expensive to have telephoto lens cleaned from fungus. Its better to buy those dry box for lens storage.

  • @monti409
    @monti4092 жыл бұрын

    How can one prevent lens fungus, and maintain the same protected against fungus. Thank you

  • @FotoSunMY

    @FotoSunMY

    2 жыл бұрын

    Always keep in dry box and hav to UV sunlight shine thru to kill germs or mold.

  • @bkproductions3569
    @bkproductions35692 жыл бұрын

    My front lens doesn’t come off at all with that lens tool. When I get to the second part of dismantling, from the rear, the small phillip screws got ruined. 2 are stuck and that middle lens doesn’t even wiggle loose. I can’t get the tripod ring off either. I think I will end up throwing mine away…

  • @FotoSunMY

    @FotoSunMY

    2 жыл бұрын

    U know what.... get a heat gun. And also... rest for a day and come back fresh ! U can do it

  • @roderickmangosing8124
    @roderickmangosing81243 жыл бұрын

    Can i send you my lens to have it cleaned? I will pay you.

  • @stephanehgnr268
    @stephanehgnr2685 жыл бұрын

    Hello, pity that you have benefited from the complete disassembly to show how to disassemble the autofocus ring Manual / Automatic. Indeed, on this lens model this ring is the weak point and it breaks often, or the screw that holds the spring button, passes through the ring (this is my case). But congratulations for the work and the video.

  • @Magitorhacker

    @Magitorhacker

    5 жыл бұрын

    Have you found disassembly tutorial, or any solution? I have the same problem, and no luck at the google-fu.

  • @stephanehgnr268

    @stephanehgnr268

    5 жыл бұрын

    I draw a part to put a new screw a little more long. I print the part on my printer 3d. It work very well. The button refind his function and the ring stay in place.

  • @Magitorhacker

    @Magitorhacker

    5 жыл бұрын

    ​@@stephanehgnr268Great, i had the same idea. It is correct, that the screw is an M1.6?

  • @stephanehgnr268

    @stephanehgnr268

    5 жыл бұрын

    @Magitor yes screw M1.6. Have you un email ?

  • @Magitorhacker

    @Magitorhacker

    5 жыл бұрын

    @@stephanehgnr268 Yes, it is magitor underscore hacker at hotmail dot com

  • @kiyoshim9593
    @kiyoshim95933 жыл бұрын

    is there a way to remove fungus from lenses that are glued together?

  • @FotoSunMY

    @FotoSunMY

    3 жыл бұрын

    Yes. U boil the lens with water.

  • @kiyoshim9593

    @kiyoshim9593

    3 жыл бұрын

    @@FotoSunMY dont I meed UV glue after that? wait what? are you joking or what. destilled water?

  • @shakirkhan-bf6td
    @shakirkhan-bf6td3 жыл бұрын

    i hew gilas waggas rimow kemikal nam

  • @ROHITKUMAR-fl8hy
    @ROHITKUMAR-fl8hy4 жыл бұрын

    Sir can u clean that

  • @neonthumbz
    @neonthumbzАй бұрын

    Hi Sir, do you provide a service for this? If yes i would send mine for cleaning. Plz give me a ur contact for me to reach out. Thanks

  • @ROHITKUMAR-fl8hy
    @ROHITKUMAR-fl8hy4 жыл бұрын

    Sir 55-200 mm fungus in aperture how to clean sir

  • @WesWarner
    @WesWarner3 жыл бұрын

    Do you have other contact details other than the whatsapp contact details?