NIKE AIR FORCE 1 | RED BOTTOM 'GLITTER' CUSTOM | HOW TO
Тәжірибелік нұсқаулар және стиль
I wanted to create the Red Bottom Air Force 1 for NYE! I added fine glitter to give it a luxurious POP to sparkle whenever there is bright light! I hope that you all enjoy this video and the process I take to make them. Please follow along if you would like to make your own! Comment below if you would pay a high ticket for a shoe like this! Don't forget to SUBSCRIBE and become part of the Custom Feens family! Thanks for watching and as always, "Don't forget to smile, be happy, and make other people smile! Love y'all!
*Disclaimer: The red bottom will come off if you don't use some kind of sole protector. If you want to see a video on how to apply and protect your sole with a sole protector, here is the link to that video.
• HOW TO apply Sole Prot...
Materials Used:
Angelus 2 Hard Plastic Adhesion promotor/ Film Hardener - www.amazon.com/dp/B01G7KHH8Y?...
Angelus 4-Coat Leather Clear Coat Finisher (Flat) 4oz - Scratch Resistant - www.amazon.com/dp/B09KZ3GZKQ?...
Angelus 2 Thin -www.amazon.com/gp/product/B01...
Angelus Red Acrylic Paint - www.amazon.com/Angelus-Leathe...
Angelus Fire Red Acrylic Paint - www.amazon.com/Angelus-Leathe...
Mod Lodge Gloss-Lustre-Lustre - www.amazon.com/gp/product/B00...
Krylon Sealer Glitter Blast (Clear) - www.amazon.com/gp/product/B00...
Torc Black Glitter (G05) - www.amazon.com/gp/product/B09...
Pure Acetone (Super Nail) - www.amazon.com/dp/B009SDJQCI?...
LAMXD 11”Rotate Turntable Sculpting Wheel Revolving Cake Turnable - www.amazon.com/dp/B09Y8QWDCY?...
LANHU Abrasive Dry Wet Waterproof Sandpaper Sheets Assorted Grit of 400/600/ 800/1000/ 1200/1500 - www.amazon.com/gp/product/B01...
3/16 Inch Grommet Tool Kit - www.amazon.com/gp/product/B09...
Leather hole punch tool - www.amazon.com/gp/product/B00...
Createx Colors Flexible Adhesion Promoter Paint for Airbrush - www.amazon.com/gp/product/B01...
3M Vinyl Tape 764 2in (Orange)- www.amazon.com/gp/product/B00...
Cotton Balls - Find some cotton balls somewhere lol
Music:
All artist can be found on Spotify and Apple Music
‘NiGGaS LegS BrOkE’ - FLGHTRSK TRIGG open.spotify.com/track/4UMyye...
‘rOAd $hoW’ - FLGHTRSK TRIGG
open.spotify.com/track/6D2wzR...
Side Piece - Janna Williams and Carsten Williams open.spotify.com/track/3KRltu...
Пікірлер: 107
Now THIS is a job well done!
@CustomFeens
Жыл бұрын
Thank you so much! Please subscribe if you haven’t already! I’ll be posting more videos like this weekly!
Wow!!! Nice face lift… I really like what you did to the all black Air Force 1. Now that’s talent👍🏾
@CustomFeens
Жыл бұрын
Thank you so much! Please subscribe if you haven’t already! I’ll be posting more videos like this weekly! Peace and love!
Real work of art!!
@CustomFeens
Жыл бұрын
Thank you so much! Don’t forget to subscribe if you haven’t already! Peace and love!
My boy Tay is talented! High Quality work. Can tell he's passionate about his work. Keep bringing that 🔥💪🏾
@CustomFeens
Жыл бұрын
Appreciate the love my brother!
Very informative!! Thanks for not gatekeeping. #BlkA1s
@CustomFeens
Жыл бұрын
No problem at all! Just spreading the sauce! Peace and love!
Truly amazing at what you do!!!!! Love love love these !!!!!!
@CustomFeens
Жыл бұрын
Thank you so much, Kishia! More videos coming soon!
new to customizing, and your video helped a lot great job keep up the great work
@CustomFeens
12 күн бұрын
I love to hear it! Good luck on your customizing journey!
great video man
@CustomFeens
5 ай бұрын
Thanks bro. Appreciate you watching! Please make sure you’re subscribed, I have more coming!
Angelus has a red bottom paint called Walk on red.
@CustomFeens
Жыл бұрын
Sweet! I’ll look it up! 😊
This man neeed to be famous
@CustomFeens
Жыл бұрын
Thanks a lot! You’re a real one!
Ypsilanti in the building/ just now starting my own customs Nice work bro
@CustomFeens
Жыл бұрын
Ayyee! Thanks a lot, and best of luck on your customization journey!
Great job, Tay! Needed these for New Years fit 🔥
@CustomFeens
Жыл бұрын
Thanks, Kelly! Valentine’s Day is coming up!!!…🤩
Those look fire my boy.
@CustomFeens
Жыл бұрын
Appreciate the love! 🔥
thanks alot bro!!!!!
@CustomFeens
Ай бұрын
Yessir! No doubt! Hit that subscribe button for me bro! 🙏🏽
Very tough my guy 💯💪🏾
@CustomFeens
8 ай бұрын
Thanks for the love! 💯
cool 😎
@CustomFeens
7 ай бұрын
Thank you so much!
Can I order a pair?
@CustomFeens
Ай бұрын
Contact me on Instagram. DM me and let me know you’re coming from KZread. @customfeens
These look great! Will white or other colors turn out just as well? #customsneakers
@CustomFeens
Жыл бұрын
Yes! Actually, I will soon be posting a video making an All White Pair of AF1s!
New to the channel and here to support
@CustomFeens
3 ай бұрын
Happy to have you here! 🤝🏽
Yo bro check out "Liquid Kicks" (Scratch Protection) and use that on your shoe soles to keep your red bottoms from coming off. Nice custom work though!
@CustomFeens
Жыл бұрын
Thanks for the sauce! I’ll defiantly give it a try!
@chrischandler5338
Жыл бұрын
No problem bro
@indiancarter601
Жыл бұрын
It will still peel off.. The paint material is not meant to go on pourus surfaces
@CustomFeens
Жыл бұрын
@@indiancarter601 I’m not sure what you’re referring to…the paint or liquid kicks??
@indiancarter601
Жыл бұрын
@@CustomFeens liquid kicks.. Whatever you use the paint will still peel off the bottom...
The Only Cool Lightskin Ik 😂🤝🏾🔥
@CustomFeens
Жыл бұрын
Well, I hope you meet a lot more bro! 🤜🏽💥🤛🏾 One Love!
Tje nike tick logo on the sides was fit to be painted gold too
bro i don’t know but i think u can use clear sole protectors so that the paint doesn’t come off
@CustomFeens
Жыл бұрын
I am sure you can too but it still doesn’t keep the paint on because there is so much friction. If you know of some that doesn’t come off and stays clear when applied, please give me the sauce! 🤩 @Astronautkid
Maybe a couple thin spray coats of clear flex seal. The flex leaves a rubberized coating and probably can be cleaned and touched up as needed, potentially keeping the red pristine looking 🤔
@CustomFeens
4 ай бұрын
That may work for the red bottoms. I’ve never tried. I just use clear sole protectors.
a low playing instrumental is better suited for a learning environment, love what your doing tho, thx for the session
@CustomFeens
2 ай бұрын
Feedback like this is great! Thank you! And thanks for watching! I’ll incorporate that into my next one!
Can you do it with the paint brush only
@CustomFeens
Жыл бұрын
You can indeed use a paint brush to paint the red bottom! I just feel like the airbrush is more efficient.
Can u do a old school vans red bottom no glitter?
@CustomFeens
3 ай бұрын
Yes I can! What color cans… black or white?
I seen some people paint the bottoms and immediately thought NO lol it does look dope but sucks when you're walking and it comes off. I wish they had paint for soles but nothing has come to light just yet. The only thing I can say to use to help even more are sole protectors. Other than that dope custom 💯
@CustomFeens
Жыл бұрын
Check out the sole protector video! kzread.info/dash/bejne/nqiWpq6baKqxmbw.html
Where did you get your spinning turn table
@CustomFeens
3 ай бұрын
Right here. LAMXD 11”Rotate Turntable... www.amazon.com/dp/B09Y8QWDCY?ref=ppx_pop_mob_ap_share
What setting did you use for the grommet tool?
@CustomFeens
3 ай бұрын
My grommet tool is on setting. It’s 3/16 of an inch. So first I used punch pliers to make the eyelet hole big enough, then, came back with the grommet tool to install the gold grommets.
Whats the thing u used for the end of the laces? The tool u used?
@CustomFeens
Жыл бұрын
It's called an "Aglet tool". It installs the metal lace tips for the shoe laces, or hoodie draw strings.
@Perfect_Tactical
Жыл бұрын
@@CustomFeens thank you
@CustomFeens
Жыл бұрын
@@Perfect_Tactical you are very welcome!
Do u have to sand the shoe down? How do u know when u sanded too much or too little??
@CustomFeens
Жыл бұрын
First, acetone the shoe to get the factory finish off. You don't have to sand the shoe but I sand the shoe because the sanding removes more paint and it creates abrasion on the surface of the shoe for the new paint to stick to. You can sand as long as you need to, just don't go overboard and damage the shoe. Once you start to see scuffs on the shoe you're most likely good to go in that spot. You've gone too far if you start to see leather peel. lol
@Perfect_Tactical
Жыл бұрын
@@CustomFeens great information .. thank you
@CustomFeens
Жыл бұрын
@@Perfect_Tactical no problem at all! Good luck!
Which spray you are using??
@CustomFeens
Жыл бұрын
Krylon Sealer. All links to everything I used to create the shoe is in the description of the video! 😃
What’s that called where you have the shoe spinning on the computer desk
@CustomFeens
Жыл бұрын
It's called a levitating shoe display!
@antbsooforiegnn6707
Жыл бұрын
@@CustomFeens appreciate you man keep up the work 💥
@CustomFeens
Жыл бұрын
Not a problem at all!
Do really need the 2hard paint ??
@CustomFeens
Жыл бұрын
It’s recommended, I wouldn’t say it’s needed.
That spray must needed?
@CustomFeens
Жыл бұрын
Yes. The sealer is needed.
Sole protecter?
@CustomFeens
11 ай бұрын
Yes! Definitely. I have a video for that! kzread.info/dash/bejne/nqiWpq6baKqxmbw.html Check it out.
where i can find black glitter?😢
@CustomFeens
Жыл бұрын
You can find the glitter on Amazon!
Why not use angelus glitterlites?
@CustomFeens
Жыл бұрын
Thank you for informing us about this. We will definitely look into it!
@xXJosI2ockzXx
Жыл бұрын
I just finished a custom with the angelus glitterlites, its not as prominent in glitter, but i think using it as the base instead of modge podge can work and tyen adding the glitter on top.
@CustomFeens
Жыл бұрын
@@xXJosI2ockzXx this is definitely something we’ll be trying on the next one! Thank you
@iamsawart5580
Жыл бұрын
I use it as a base, then pour extra fine glitter on top. Glitterlites isn't as sparkling.
How durable is the glitter? Do you have a problem with glitter shedding and/or cracking?
@CustomFeens
7 ай бұрын
It’s durable…for light walking…but I would do it a little different next time and only apply 1 or 2 layers. Overtime, when doing big city walking, I did get some cracking and flaking. The initial coat stayed perfect though, which lets me know that the extra costs aren’t really needed.
@mstraker418
7 ай бұрын
Thanks!!!
@CustomFeens
7 ай бұрын
No prob at all. Thanks for the engagement. If you really like my videos, please SUBSCRIBE! We are trying to reach the BIG 1,000 SUBS! Lmk how your shoes turn out!
Mine doesn’t look as sparkly 🥴
@CustomFeens
Жыл бұрын
Hmmm… 🤔 What are you using to apply the glitter?
@ariiellez
Жыл бұрын
@@CustomFeens what glitter do you use ?
@CustomFeens
Жыл бұрын
It’s called Torc. I left the links to everything I used to create the shoe down in the description! You can find it there! 😃
Regular laces, oh the disrespect
@CustomFeens
Жыл бұрын
No disrespect. Different laces for different places!
They red bottom is gonna fade.
@CustomFeens
2 ай бұрын
Eventually, just like any other sneaker. The sole protector keeps the color a lot nicer longer
@CrazyCarnivore
2 ай бұрын
@@CustomFeens thank you.
@CustomFeens
2 ай бұрын
No problem 🤝🏽
Music is horrible. You should’ve did the video. I just talked all the way through it. Stella use that horrible music thumbs down bra and I’m from Detroit.
@CustomFeens
3 ай бұрын
Yea, well if you’re from Detroit, do better. The only thing understandable about your comment is “Music is horrible”. Everything after that make absolutely no sense. And if you don’t like the music, make some, and maybe I’ll feature your trash ass music in one of my videos. The page and this video is about teaching how to customize shoes, not make music. You gave a thumbs down because of the music and not the value of the video. Stop hating, you’re a crab and it’s sad you are from Detroit.