Found this looking at the new 49X DLC truck on snowrunner... Was not disappointed. I love this thing.

@RCConstructionHobby

3 жыл бұрын

great game! its a shame that this toy does not perform the same way it does in the game. Thanks for watching.

Thanks for the honest review 👍🏾

Great review 🤔☺👍. I think I will get one because of your detailed demonstration....Thanks!

@RCConstructionHobby

3 жыл бұрын

Glad you enjoyed it.

For a toy quite nice. Stay healthy my friend and greetings from Berlin 😷👍

@RCConstructionHobby

3 жыл бұрын

Thank you. Glad you enjoyed it. From Canada stay warm 😃

Awesome looking rig

It looks like it dumps pretty good definitely a looker i like your construction site i have one in my garage but yours us awesome

@RCConstructionHobby

3 жыл бұрын

Well you have something I dont and that is a site in the garage. This truck really needs an esc for the drive wheels.

@AdventureTimeRC

3 жыл бұрын

@@RCConstructionHobby i bought a huina 1333 mix truck i changed all the electronics in i need a dump truck the one i have is small the bucket on my front loader is bigger than the trucks bed lol

Simply the Best For the Money

You need to check out the Lesu line of scale RC kits. Their tractors and dumps are mind blowing scale!

@RCConstructionHobby

3 жыл бұрын

Yes I have seen those trucks, excavators, loader, forklift, skidsteer, dozer ...... the list goes on and on. But they are a little above my pay scale so one day I would love to have there stuff on this channel. thanks for the tip.

Nice informative review mate👍 looks like a good alternative to the huina trucks for those interested😉

@RCConstructionHobby

3 жыл бұрын

Ya I think the best way to go is to either go tamiya or another 1:14 scale truck or make your own bruder conversion. I dont know much about the huina truck but I think they.might be the same size and chassis.

@FMDRCConstruction

3 жыл бұрын

@@RCConstructionHobby yea, got another tamiya in my future😆 just need to finish the one I got first..., after im done with the loader🙈

@thatsmyrc

3 жыл бұрын

@@FMDRCConstruction it looks more like the scale size of the ertl Big farms Peter built 1/16 series. Which those models also are smaller I. Comparison to the bruders by a significant amount on width height and tire sizes.

@nihalwould4976

Жыл бұрын

🚌🚜

Nice western star 49 x.

Thanks for the great review, yes it looks great, but some things are not great as you know, but it is a RTR, and much cheaper than a Tamiya, but for me it is a pass.

Congrats on 1k! I hope to reach 1k one day too

@RCConstructionHobby

3 жыл бұрын

Thank you and good luck on your goal of 1k

Good video 👏🏻👏🏻👏🏻

@RCConstructionHobby

3 жыл бұрын

Thanks, glad you enjoyed it.

This looks awesome it would match my legendary rc front loader

@RCConstructionHobby

3 жыл бұрын

It is a pretty good rcfor the money

@russsaling181

3 жыл бұрын

How did you get it to drive slow??

@russsaling181

3 жыл бұрын

how did you get western

enjoyed that video So the real question is where can you buy a western star like that at

❤❤❤❤❤❤❤❤

Nice video you forgot to compare it with a WPL, this Western Star 49X it haves hobby grade body with cheap toy drivetrain cero suspension

@juanafrancisco1372

3 жыл бұрын

This western star 49x radio controlled diecast masters truck is not a cheap toy at all, maybe they are not made like the scale art, tamiya or wedico rc trucks (I.e. with realistic shasis, transmision, suspension and axles) but they are well designed and also perform the same function as the others.

I’d be interested in the cab and bed to make a real deal Rc conversion 😉

@RCConstructionHobby

3 жыл бұрын

Thats about all that this truck has that is worth keeping.

@juanafrancisco1372

3 жыл бұрын

It makes sense if the toy is not 3rd but in case not, the truck shown in the video is already radio controlled from the factory, rather what you would do is modify the chassis change the position of the electronic system and one of the motors to the front of the vehicle, keep the interior of the cabin intact, install the transmission , the suspension systen, the axles, fit the original wheels only by making the holes for the for the installation of the bolts following the measurements for the American caps and also the tires factory that's what you have to do. ☺

This truck looks really good! Are the steering and throttle proportional? Perhaps you mentioned that but I missed it lol

@RCConstructionHobby

3 жыл бұрын

Well not really proportional like Hobby grade trucks are. there is a very small about of speed control but you really need to be delicate on the controls to find it. as for steering it is the same. Its a good started truck and can be modified for sure to make it proportional for a very low cost.

Wish they made it in 1/14 scale they would sell 10 times more. Everyone would buy it just for the cab

@RCConstructionHobby

3 жыл бұрын

Probably would. And also if they made it rc grade and not 1 piece of plastic

How did you get the truck to have proportional throttle? My truck does not have proportional throttle

@RCConstructionHobby

3 жыл бұрын

Lol very carefully. I was able to barely touch the throttle and it went slow. But the only way to get it to go slow normally is to do a conversion to proper rc esc's.

@christherailfan5851

3 жыл бұрын

@@RCConstructionHobby okay thanks

can i have the truck i want one so bad ive been looking for one and cant find one

Maybe someone has an Adressen where you can get this truck ???

@RCConstructionHobby

3 жыл бұрын

Click the link in the description

Tamiya is way better an way better mods for it. that western Star is a childs toy.

@RCConstructionHobby

3 жыл бұрын

Just remember they are not the same size at all. And you can not compare the two. Tamiya is hobby grade this is just an rc toy. Tamiya is a very are 1-14 scale. This truck is 1-18 and all plastic. So not really apples to apples comparison.

First!

It’s overpriced for an all plastic no metal truck it has no suspension the doors don’t open the remote is kinda cheesy... the truck looks good and it’s fast.. but at $250 it’s overpriced should of ben priced around $150-$200

Sorry I didn't like it ........👎 Looks like a cheap copy👎. Great video 👍 Tamiya trucks are the BEST. 🌟🌟🌟🌟👍

@RCConstructionHobby

3 жыл бұрын

So you like the video but don't like the truck? That is ok. I kind of feel the same way about the truck. Looks nice but function is not great. Thanks for the great feedback 😀

@thatsmyrc

3 жыл бұрын

@@RCConstructionHobby did you buy this truck or was it some Sort of promo giving to you? If you bought it full price dang that kinda sucks but go for it and make it into something worth while

@rcchbuilds

3 жыл бұрын

@@thatsmyrc no promo. I bought it. But I figure there is a future project with this machine. I might do a give away with this possibly. Rc construction hobby :)

Its junk

@RCConstructionHobby

3 жыл бұрын

Do you have one? I tend to agree. But there is potential if you fix the problems with it. It is made by the same people who make the huina truck.

@MrSalty-eg4zb

3 жыл бұрын

@@RCConstructionHobby No but have seen them and I would not waste $250 on one you can get a good one for $600 range but this one waste of money unless you are 10