Ivan acting like the steering wheel coming off is an everyday thing. LOL

@anibalbabilonia1867

3 жыл бұрын

Hahahaha see my coment bellow!👌😂👆 epic!

@rayceeya8659

3 жыл бұрын

What? That's never happened to you before? Weirdo ;)

@KastaRules

3 жыл бұрын

On Top of that, which is scary funny, is that his name is really Ivan.

@lemagreengreen

3 жыл бұрын

Is just wheel, why you hef to be mad?

@piotrkoodziej4336

3 жыл бұрын

It's a quick release wheel. It's a racecar after all.

I’m glad to see he has his safety squints and protective sandals while using power tools :)

@Kalvinjj

3 жыл бұрын

Or as Rich from Rich Rebuilds call 'em: the Air Jesus 13's

@gibsonvanbeuren8261

3 жыл бұрын

He made sure to shoot the sparks down the turbine as well, very important step!

@jeremymurphy7320

3 жыл бұрын

From the David Freiburger School of Shop Safety

@mb8804

3 жыл бұрын

Safety squints, I see we have a fellow AVE fan.

@mb8804

3 жыл бұрын

@Alexandre prudence the safety goat has it covered.

The sequel to Mad Max looks like it is coming along nicely.

@SirCuddlesWorth

3 жыл бұрын

Vlad: *WITNESS ME*

@pigpen616

3 жыл бұрын

This is around the time Mad Max to take place.

@TheBlackAndWhiteCow

3 жыл бұрын

Mad Maxim

@Hitycooking

3 жыл бұрын

kzread.info/dash/bejne/m6SbrsyPg7SuobA.html

@c.n.crowther438

3 жыл бұрын

Mad Max Vorkuta Road 😂

As an Aussie, I'm glad Russians have the same level of safety footwear being worn at the workshop. 😉👍

@oli12shackel9

3 жыл бұрын

Fuckin oath brother

@joe125ful

3 жыл бұрын

Safety in Russia?:)

@aleksamarkovic2894

3 жыл бұрын

Everyone: Whats a health&safety level in Russia? Russians: Yes!

@danielspoon1234

3 жыл бұрын

Eyewear too

@5hiftyL1v3a

3 жыл бұрын

Welding gal all day in singlet and thongs. Just have an Oak in standby.

Turbo Joined the chat. Gearbox: IGHT, imma head out.

@squirlboy250

3 жыл бұрын

Lol

Just imagine Ladzilla and the team participating in quartermile races in the USA.... that would be epic!..

@maxmoritz5065

3 жыл бұрын

It needs 5,5 seconds from 0-60 kph Thats around 40mph?? Thats slow

@anibalbabilonia1867

3 жыл бұрын

👋😂👌i agree!

@Mrpurple75

3 жыл бұрын

Yeah, was driving to work and looked at the speedometer thinking 60K is slow

@robmanueb.

3 жыл бұрын

Drag week!

@billbergen9169

3 жыл бұрын

@@maxmoritz5065 It's turbo'd tho.

The engine fitment is on point

Hasn’t he realized Ivan always breaks the car? lol

@colchronic

3 жыл бұрын

Obviously, did you see how he broke that steering wheel!? The nerve

I lost it when thebloody steering wheel came off !

5.5 seconds to 36mph? You'd almost be able to keep a stock standard diesel VW Golf in sight.

@bliskthehusky2205

3 жыл бұрын

you might catch a glimps of my cavaliers tail lights as i gap you

@bliskthehusky2205

3 жыл бұрын

or my 20 hp china enduro

@hehehoho3770

Жыл бұрын

for a car that looks this scuffed I'd say it's pretty impressive

@dinokozidis3855

Жыл бұрын

😂

the 5.5 to 60 kph run, comes out to about 9.2 seconds to 60 mph on paper. this has go to be fun as hell to just screw around without any worry in the world about breaking something. that's happiness!

@11:48 Oh, what a day, what a lovely day!!! The only thing missing is the silver spray on the mouth ;D

@1danny2k

3 жыл бұрын

Witness me!!

@kwhitney22

3 жыл бұрын

Witnessed!

only in russia can you go to the walmart and get a brand new carburettor for a 60 year old military truck

@luuk3213

3 жыл бұрын

They were also used in civilian applications

@ras4782

3 жыл бұрын

🤣🤣🤣

@Billhatestheinternet

3 жыл бұрын

Zil is also a luxury car maker. Their equivalent of Rolls Royce and Maybach. In fact, it is Putin's limousine.

Tesla: our intentions and aim to acheive the lowest emissision non cobustional engine Gargage54:

@VXGaming

3 жыл бұрын

The Brutus - How cute.

@Zenheizer

3 жыл бұрын

Tesla doesn't mak combustion engines (or I have missed something lol)

@pier11francesco

3 жыл бұрын

Tesla doesn't make any combustion engine... And their aim is to use diesel generators to charge the batteries of their teslas can't blame them diesel engines are the only real step up we ever made in fuel economy and emissions.

@Jk-ri8tt

3 жыл бұрын

@@pier11francesco i bet you feel tight lipped and dumb read it again

@thebakedtoast

3 жыл бұрын

@@Zenheizer...?

EVERYTHING about this, from the car to the steering wheel coming off, is BEYOND metal \m/

I think it needs a four barrel carburetor preferably in a blow through configuration to make boost as that two barrel as a draw through is limiting airflow.

That steering wheel tho!

@joe125ful

3 жыл бұрын

Yes and driver face tell 1000 Words:):)

It needs 2 carbs, that would help big time

@nenadvidojevic8746

3 жыл бұрын

I had same tuugt

@TheRogueAdventurers

3 жыл бұрын

@@nenadvidojevic8746 Ngl I didn't know you could turbo a carburetted engine before this. Does the fuel go through the turbo? Isn't that bad for the turbo?

@skuula

3 жыл бұрын

@@TheRogueAdventurers That's the only way, unless you have a pressure carburettor.

@cleverdog4

3 жыл бұрын

@@TheRogueAdventurers I tought the same..

@billymanilli

3 жыл бұрын

@@TheRogueAdventurers yep, the fuel goes through the turbo... They say it's not the best for turbo longevity, although some older vehicles came from the factory the same way. They call it a "draw through" setup... You can also run a carb after the turbo instead ("blow through" setup), which is better, but as said above, the carb needs a few mods, or needs to be placed in a sealed box (basically the pressure inside the bowls needs to build with boost pressure, or it's gonna... well... work "backwards")

When the drone is faster than your tuned car

@josephbaker7810

3 жыл бұрын

Some racing drones can reach up to 160 mph

@joe125ful

3 жыл бұрын

@@josephbaker7810 Racing drones?:):):) Lool:)

@LG1ikLx

3 жыл бұрын

They were only going to 60khm

@JamesSmith-dn8lb

3 жыл бұрын

@@joe125ful you act like you've never seen a drone race before.

@dangerousdoggo5465

3 жыл бұрын

Some consumer drones can go 30kmh, and that thing didnt look like a cheap thing.

does these guys have any engine that fires on all cylinders?

@mrkykpaints351

3 жыл бұрын

Tveksamt 😂 och mer avgaser går ut genom den trasiga grenrörspackningen än in i turbon 😂

@Karjis

3 жыл бұрын

why bother if gearbox breaks with seven? 😆

@kevinragsdale6256

3 жыл бұрын

for real, they get these shit boxes just barely running and act like its some big shit

@matekochkoch

3 жыл бұрын

@@kevinragsdale6256 Get back to your new bought Legos and watch them age while you are too afraid to touch them because the box might get dirty

@aapoaunola2080

2 жыл бұрын

@@matekochkoch that was the worst roast i have ever seen

song in 1:05 is Tut Tut Child - Oracle for everyone who's wondering

@Glhaw

3 жыл бұрын

You are a god amongst mortals

@philaudiostrike8746

3 жыл бұрын

The rest was a bunch of infected mushroom tracks XD

I thought my welds were shit..

@MicroRotors

3 жыл бұрын

Yeah, that airflow is hideous.

@janeblogs324

3 жыл бұрын

Our welds....

@colchronic

3 жыл бұрын

In Soviet Russia Tig welds you!

@thefreedomguyuk

3 жыл бұрын

Hmmmm......they actually look better than mine....... not saying his aren't crappy.....sigh...

@duncandmcgrath6290

3 жыл бұрын

Buckshot bubble gum

"Put the first gearbox in 3rd, and the second gearbox in 4th which is like 1st..." LOL this is why I love this channel, nothing is off limits and you guys are crazy in a great way... I don't know anything about Russia really, but you guys seem like a fun bunch. Cheers from Rhode Island, US :)

Have you guys ever thought of making T-shirts with the Garage 54 logo on it? I would definetly buy one!

@joe125ful

3 жыл бұрын

Great idea!

@karolwlad76

3 жыл бұрын

Yeah ! and sell worldwide ;)

👋😂👌hahahaha....the guy's face when the steering wheel came loose was epic!!👋😂👍 i lmfao!

My engine thinks it’s a comedian, but I don’t like knock knock jokes..

@thefreedomguyuk

3 жыл бұрын

Reduce the advance ignition to 0°. That will knock out the knocks.

@BikerDaddy22RideorDie

3 жыл бұрын

😂🤣

@junatah5903

3 жыл бұрын

And how many times I've we heard that joke before?

@BikerDaddy22RideorDie

3 жыл бұрын

Juna my first time lol

@forevercomputing

3 жыл бұрын

@@thefreedomguyuk Rodney says Hi

11:50 i died laughing, it's one of those WATCH PEOPLE DIE INSIDE moment.

even if i have a bad day, i love to watch your channel, cheers me up, and you english translater makes even more funny... thank you

That is the most badass madmax-esk thing I've ever seen.

Surely carb AFTER the turbo. You’re throttling the turbo, so it will never spool up. But I love your work my crazy Russian friends.

@Martin_from_SC

3 жыл бұрын

Thats exactly what I was thinking... I had never seen a carb fitted in front of a turbo. I'm surprised that even runs. These boys need to get themselves a 4 barrel carb and fabricobble an intake manifold, then feed the turbo into it.

@1Longranger

3 жыл бұрын

Actually it will spool up faster.

@Qwerty1235945

3 жыл бұрын

Martyn Watson it can’t be a good thing to have the intake hoses collapsing under vacuum. Also carb after turbo would avoid the icing they’re experiencing.

@1Longranger

3 жыл бұрын

Back in the 80's I had few draw through turbo/carb set ups. The intake piping was all solid aluminium. What happen is that when the manifold is under high vacuum the turbo impellor is almost freespooling (it isn't drawing much air, which takes energy). That results in higher turbo shaft rpm's. Works well with the side benefit of charge cooling. Primitive, but it worked. I also ran a 30% water/methanol injection upstream of the carb. This does cause impellor leading edge erosion over time though.

@legros731

3 жыл бұрын

@@Qwerty1235945 you need a special sealed carb if you put it between the engine and turbo With a normal carb its the only way to go

It’s so nice to see ladzilla with some upgrades. I so appreciate that car. Great work.

You should use a dual carb induction setup, it will give you more flow into the turbo and allow for a little smaller jet size between the two(compared to just one carb) to increase fuel atomization. Also if it has a blow off valve try using a stronger spring to allow more boost.

Its beyond me why lada never had this as an option.

@MegaSockenschuss

3 жыл бұрын

Obviously the steering wheel would've been a bit dangerous in traffic.

@danielmoukli4590

3 жыл бұрын

@@MegaSockenschuss wym it's absolutely fine

@mb8804

3 жыл бұрын

@@MegaSockenschuss all lada's with racing heritage have removable steering wheels.

@MegaSockenschuss

3 жыл бұрын

@@mb8804 I don't talk about the remarkable engineered fast removal. The alignment is just wrong, people could be overtaxed.

@johnbourdeau9

3 жыл бұрын

@@MegaSockenschuss In mother Russia. You don't drive car, car drives you

I showed this to my cat He didn't understand it. He’s a cat.

@ricky107_

3 жыл бұрын

No way

@welloffthepace3127

3 жыл бұрын

My cat wanted to know why the carb was that side of the turbo

@joe125ful

3 жыл бұрын

Huh?Its suppost to be joke?

@Jupiter__001_

3 жыл бұрын

@@welloffthepace3127 Because most carbs run with atmospheric pressure so they don't work properly when you give them boost. You can tune one for a higher pressure than one bar, but that isn't helpful when the boost is varying a lot like on a turbo. For that application you need either a pressurised diaphragm carburettor (which is considered an early fuel injection system), or proper fuel injection either mechanical or electronic. The diaphragm-based carburettor is used on many WWII aircraft with superchargers.

Well, I was expecting a little more but hey, it's still awesome. It needs more than 3lb of boost tho. Issue is, they have a giant turbo on an engine that doesn't Rev. They need a little dinky turbo that flattens out at like 4k rpm. Then it'd spool faster and would have so much more lower end. It'd be better overall.

@Nitwa08

3 жыл бұрын

I'm no mechanic, but what if they'd use a smaller turbine coupled with the same gargantuan compressor? Wouldn't it produce the same results I. e. Faster spool and more power at the lower end?

@ProdigalPorcupine

3 жыл бұрын

@NITWA MSEMEMBO - The small turbine wouldn’t be able to turn the compressor fast enough to generate any real pressure. I’m just guessing, mind!

@danielmoukli4590

3 жыл бұрын

@@Nitwa08 nope, wouldn't be able to spin the comp wheel

@mac24seven

3 жыл бұрын

@@Nitwa08 it's just easier to swap turbos in that case XD Like, the turbo that is on their little van thingy they do tests with? That'd work great with this setup.

@Clunk49

2 жыл бұрын

x2 on a smaller turbo, spool that baby up.

I’ve only just started watching this channel, and god damn these videos are entertaining. You definitely deserve more subscribers, keep up the good work!

13:43 is that a reference to Wide Putin walking vídeo

@vojvoda-draza

3 жыл бұрын

Lol, that would be an epic troll. Amirite?

No any ecu remaps, just pure feelings and adjustments base on ear tune

I was really impressed with the ignition spark on the right bank that appeared to jump across the distance of three cylinders! This whole program was impressive!

I love this channel, both crazy and brilliant. I think that combination is a sign of genius tbh.

Make GASSER suspension setup for more weight transfer to the back

Steering wheel falls off Him outside: this is fine Him inside: *CRAP CRAP CRAP CRAP HOLY CRAP*

@torquetheprisoner

3 жыл бұрын

😐

@jjhack3r

3 жыл бұрын

Not much to run into out there...

Last episode: snow. Today: t-shirt

Garage 54 delivering the real content we need no ads no bullshit

The welding skills is just amaizing

should have put the carb right before the intake, pure air pushing into the carb

@paul_109

3 жыл бұрын

On one hand, the turbo can take damage when it's working with air-fuel mixture (which is why the carb ist mostly between turbo and intake), but the carb itself works better when it has normal atmospheric pressure outside und the turbo sucks the air through it instead of pushing it through the carb. The way the guys made it, the carb is going to work pretty well, but the turbo will suffer. That's why there are so few cars with carb and turbo

@blar2112

3 жыл бұрын

Pure air pushing the fuel back to the tank lol. Carbs are not injectors

@silvia_fuku0ka845

3 жыл бұрын

Carbs work on vaccum and venturi effect so fuel would just get backfed intl the tank

@biglightball

3 жыл бұрын

@@paul_109 How is this problem with pressure solved in these cars with turbo and carbs? One idea that comes to my mind is some sort of small pressurized initial fuel tank close to the carb, feeded with some fuel pump.

@biglightball

3 жыл бұрын

@Quirin M. But I mean those designs where the carb is after the turbo.

i'm glad that you are continuing to work through these problems it's hard, but kind enjoyable as well. well, I'M enjoying it and I hope you are too. kudos!

I was watching the last episode of ladzilla yesterday, BEST TIMING EVER

I suspect the Racing QUICK RELEASE of the steering wheel isn't supposed to work like that.

@omega1575

3 жыл бұрын

Hey it released quick, just at the wrong time

this has more potential, dont tell me... even the huge engine itself alone, now with a new turbo, it needs to rip!

Great video ,great shoots . Level up Sir! 😎

You guys are CRAZY....Ilove it..Greetings from Quebec Canada!

Japan:i have a power full Godzilla Russian: hold my Ladzilla

Hahahaha 11:50 the the steering wheel comes off I died of laughter 😆😭😰

Good to hear some Infected Mushroom @ 8:00 :) Awesome project lol!!

In the uk, fire suit, helmet, gloves, love your attitude to health and safety, keep it up!

"You want how many cubic inches?" "Da"

Everyone: HOLY S* AM I CRASH! Madmax be like: 11:47

Clerks McFarland: we’ve got some crazy turbo builds! Garage 54: hold my vodka

Yeeesss the ladzilla is back, my favorite from this channel

11:50 😂😂😂

"hey there fella's! " * *always has a monstrosity behind him* *

that smile at 11:50 ish haha "yayy i got it back together"

You are one awesome person love your work. Keep going😎😎

No need for an intercooler with a carb - the fuel evaporative cooling takes care of that. But you are probable getting carburetor iceing because you have the carb in front of the turbo. Best to either get a specialist blow through carb, or build a sealed box (+ high pressure fuel pump) so you can blow through the carb that will help solve the iceing problem.

Those welds tho

*@**11:48** his face when steering wheel fell off - PRICELESS! :D*

Beatiful work!!! As well as drivers shorts

2020: People should save the environment and oil resources and buy more electric cars Garage54: Hold my Vodka

@billlincoln3878

3 жыл бұрын

What about the other part the mines for your lithium ion battery and turbo spools gearboxes said not today homes

@legros731

3 жыл бұрын

@@billlincoln3878 electric car are not really better for the environment its only for people to feel better about its in reality the don't keep the car long enough to make a difference for the environment

@billlincoln3878

3 жыл бұрын

Well played

Everyone else: "We put an LS into my FD RX-7" Russians: *this*

@simont3686

3 жыл бұрын

Who puts an LS into an RX7? Taking the Soul out of the car. An RX7 without a rotary isn't an RX7.

@FinishPlayer

3 жыл бұрын

@@simont3686 Heartless people do.

@ali_ing069

3 жыл бұрын

@@FinishPlayer same as who swap a bmw m5 e39 with a 2jz?? Smhh the 4.9l v8 s62 is already perfect and better

@ThatWolfWithShades

3 жыл бұрын

@@simont3686 An RX7 without a rotary is a reliable car, and therefore it removes the soul of the RX7.

I love these guys are having fun with little money. Nice to see on youtube with all these crazy money content creators. They do some funny ass shit. The oblong wheel ones was hilarious.

Szép letisztult hegesztések ! Csoda hogy létre jön a gázáramlás )

I think the turbo will make the car rip it self apart! That’s all I really wanna see!

@thefreedomguyuk

3 жыл бұрын

Nah, it won't do a lot

There’s plenty of 7.0l transmission out there on the internet, you really should have put a 4bbl carb on to.

@Rich77UK

3 жыл бұрын

I'm sure 7l trans and 4 barrel holleys also grow on trees in Russia like they do in the U.S.A. BTW holleys are difficult to find in the UK!

@pileofrd1

3 жыл бұрын

Order it from the usa......

Now make a 4 way joystick that actuates four single piston cylinders (use a master from a hydraulic clutch - 2002 Accent for example) in an X formation and connect it to a X and Y axis pivoting joystick with pushrods to press into each master, oriented centrally so that each corner of the X points to the wheels LF, RF, RR, LR starting at top left and going clockwise. Connect the other end respectively to each corner of the car's brakes with brake lines - 4 way selective brakes ;)

Been waiting for this video for a long time. Glad to see Lada get some attention

19:00 Lower the final drive ratio of the differential so launching occurs in 1st or 2nd gear rather than 3rd which is not as capable of transmitting the forces without damage. Commonly available Mercedes-Benz 4gtronic torque converter auto box (722.3) or equivalent might be the right choice for reducing driveline stress. VLadZilla is another cool hot rod project from garage54!

@Clunk49

2 жыл бұрын

Yup, put a slushbox in it ....softer hit to the tires.

You need more than 1 carburator ;)

@joe125ful

3 жыл бұрын

Or more turbos?

Haha you guys are so funny;had a good laugh when the steering wheel came off with so much horsepower now :D

Lol when the steering wheel came off. Nice.

Oh yes, I was waiting for this!

Do you still have the old Mercedes you conducted brakepad tests with? I believe the gearbox out of this W124 I think it was, would be sufficient to deal with this engine. Or try to find some gearbox out of a Iveco Daily or Fiat Ducato. They should last. Keep up the good work and greetings from Germany!

@mario-bjornpeikert1572

3 жыл бұрын

@Martyn Watson You are right.... Sorry! My fault!

i Fn love this channel, consistently this guy goes, "and now were goin to do this n see this", not "and tune in next episode" for every other thing thing trying to stretch it out..

One thing im Noticing.. You young guy's got Skill.

Kyllä käy huonosti. Korjaisivat nyt ensin käyntiongelman että käy kaikilla pytyillä ennenkuin virittävät.

Plz just get a carb that works with a turbo.... That will NEVER work

@leebrooks7467

3 жыл бұрын

Yeah never seen a set up when the carb is not getting fed by the turbo

@PiezPiedPy

3 жыл бұрын

@@leebrooks7467 Old school from the 80's, lots of turbo cars where draw through back then, totally shit

@leebrooks7467

3 жыл бұрын

PiezPiedPy thanks for the info man lol

@frigglebiscuit7484

3 жыл бұрын

actually, draw through carbs work amazingly well, and you dont need an intercooler whatsoever. ice cold intake charge.

@frigglebiscuit7484

3 жыл бұрын

@@PiezPiedPy totally shit because they used shit parts. do it today, and it hauls ass.

Love these guys no Helmut no seat belt just a big grin

LMAO I chocked very badly by laughing at his expressions at 11.55🤣🤣

Change the engine with old mercedes om606 that is very tunable..

@billbergen9169

3 жыл бұрын

Nah, this engine is fine, it's just the setup.

@wolfmanrebel874

3 жыл бұрын

I have a om617 5cyl diesel in a 86 Nissan "hardbody" 4wd , certainly not a performance vehicle by any means but she's damn good at climbing a path up the mountain for gathering firewood and incredibly reliable....kinda a random comment I know but I had to look up the om606 you posted about , Merc engines are extremely rare in the southeast US . Idk if they are all built like the 617 but that thing is hard to kill and super simple.

no blowoff valve no intercooler ?

@frigglebiscuit7484

3 жыл бұрын

@Martyn Watson false. carbs do not need intercoolers, because they atomize fuel FAR better then efi. it atomizes so well it actually supercools the intake charge. thats why he was mentioning the ice on the carb in this video.

You guys are fu**king crazy I LOVE IT KEEP DOING A GOOD JOB AWSOME

Thanks for the Oracle music. Cool tune

Is the cold weather outside going to be your intercooler??

That gearbox makes my Miata gearbox look oversized by comparison, it’s tiny lol

@frigglebiscuit7484

3 жыл бұрын

it looks just like a ford t-4(4 speed version of t-5)

@vojvoda-draza

3 жыл бұрын

They have a double gearbox setup

@antoniosanastasiadis

3 жыл бұрын

You should see Volvo’s smallest gearbox... it weighs 20 kg only

I screamed when the steering came off (Noooooo!) But Ivan was real cool like no big deal. He must have big Russian nuts!

came for the Ladzilla, stayed for the muzak!

I think you’re welder has the flu

0-60 times, in KM/H 😂😂😂

Keep it comeing guys love your content

Best part when the steering wheel 🛞 came off and the kid just smiled