NEW TRAILER UPGRADE GORILLA LIFT ASSIST (Pros & Cons)
Ninja Gear: www.sgninjas.com Mama Ninja Kitchen: / @happykidzone2024
Жүктеу.....
Пікірлер: 74
@craigguinn542313 күн бұрын
Installed today, followed directions, works great. Took me about four hours. Balances when level with trailer bed.
@JamesZ10258 ай бұрын
1. Drill guide $10 drill straight holes, but if there are two guys on the project you should be able to help the guy drilling the holes 2. Since you moved the tubes back to avoid the bolt going inside the upright, your cable will most likely catch on the frame of the trailer. I know because I have the same trailer. I drilled the holes where the upright tubes are and used extensions on the ratchet. 3. You need M8 x1.25 x100 mm stainless steel carriage bolts (amazon) to mount the tubes. The springs are catching on the heads of the bolts you used to mount the tubes.
@stevenelson24605 ай бұрын
Round head bolt
@MrTimdtoolman1 Жыл бұрын
I got the no name brand unit and they only included too long of a hardware so had to go. I did mine on one side, seems to work fine, and my gate is very heavy.
@electricamish9 ай бұрын
The click is because you need carriage bolts so the spring slides over the head, its catching on yer bolts.
@davidcantrell643 жыл бұрын
Yeah what he said !!
@justinjdavis796 жыл бұрын
Love the new trailer and everything that is going with it!! Awesome work!!
@MowItWells6 жыл бұрын
looks good my dude
@BioHazardra6 жыл бұрын
trailer is coming along great Nick
@jims52586 жыл бұрын
I laughed so hard when you were Playing with the gorilla spring. Informative and entertaining! GREAT CHANNEL!!!
@vicentesalinas82596 жыл бұрын
Great add on!
@AlsLawnCare6 жыл бұрын
Great upgrade! 👍👍
@kerrymccambry99714 жыл бұрын
So I just installed my grill a lift kit today and I had no problems I didn't even have to read the instructions and it works absolutely greatyou can use just one but it makes your tailgate come up crooked which weakens the structure it's best to put both on so it pulls the tailgate evenly
@robmcferron87086 жыл бұрын
I know that jb weld putty at the auto parts store works good for plugging small holes, because you can sand it when it hardens. But I'd recommend drilling a drain hole in the bottom of every post you've drilled into, so water can't stand in them and rust.
@kennethmelvin87694 жыл бұрын
Heads up put oil on your drill bit so you won’t dole drill bit
@troyschultz29016 жыл бұрын
Trailer is coming together nicely!
@tebibyte23574 жыл бұрын
I hate our gate.it weights like 400 pounds. (bobcat gates) with this we will be doing great.
@upscalelawncaremonroe4086 жыл бұрын
That trailer is going to be nice
@nickfiore486 жыл бұрын
Tiny needs a dash cam, with all the "interesting" stuff that happens during the day 😂
@bjgarbacz16 жыл бұрын
its true depending on the weight of the gate. on my 10 ft single axel city rig i only have one and i have an extra for a different trailer.
@mattd99756 жыл бұрын
Do a video talking about you’re worst experiences doing lawncare
@hillbillybassfisherman81813 жыл бұрын
Wouldnt it been better to just drill new whole in the gorilla to get it in the right spot lmao
@smileybrotherslawncare95996 жыл бұрын
I like the new slow mo shots lol
@UltimateMMAFan832 жыл бұрын
I don't understand what keeps the gate from slamming forward when the spring is pulling the gate up. I put some garage door springs on my trailer and it seems to want to pull the gate out of your hands when you lift it. I'm guessing it's something to do with my placement on the springs
@RABIDFORDFAN6 жыл бұрын
Nick, make sure you plug any of those open holes that were drilled to keep water out & prevent rust on the inside of the frame.
@yahirmarcos9765
2 жыл бұрын
How?
@Gib4046 жыл бұрын
Hi nick I love you channel I was just wondering where you get your music? I really love the music you use and I have been trying to look for some good music for my channel. Thanks keep up the great work!
@imperialservices98926 жыл бұрын
Nice video I have to start putting all my goodies on my trailer also I have them sitting in the garage in unopened boxes I’ll have a fun day here soon ha ha ha
@imbullets53146 жыл бұрын
Y’all having too much fun with editing
@79lynch3 жыл бұрын
uesing one side works but useing both sides will reduce the wear a lot
@russellallday25746 жыл бұрын
sounds like the spring knocking against one of those bolts. ramps are a very sore subject with me. I have what we call a "beavertail" basicly a flat bed Mercedes van with a ramp. company that made them decided to run a high tension spring ontop of the ramp so you constantly trip over the thing, they could do with watching your video mate. new lawn care set ups looking good! glad there is going to be less scag rolling around even if they are pretty good machines, sometimes customer service is high priority than reputation. all good having great mowers but not so much if they are sat in a workshop 2 months a year wasting possible work time.
@milasdaughdrill16746 жыл бұрын
I bet the clicking noise is from ur spring getting caught on one of the heads of a bolt
@mowerman320006 жыл бұрын
its the hexed head bolts they supply carrage bolts so spting will glide over it.
@wagnerkaleb55916 жыл бұрын
Sounds like the bolt is catching on the spring
@A-P.G.T.VLandscaping3 жыл бұрын
Quick question,do you know if it works on a landscaping trailer with 4 ft walls
@wadedavis50666 жыл бұрын
There should be large washers on the gate bolts so the wire doesn't pop of the bolt.
@perryschmoll70886 жыл бұрын
You may need a locking nut on those ramp bolts?
@simonsummers91946 жыл бұрын
Simon from the UK here... Would look Great with a camera on the back to help with parking etc
@jonbetts93203 жыл бұрын
It depends on size of gate if you have a bigger gate you need two but your average size gate only one is needed
@mattreynolds48816 жыл бұрын
I bet the spring is hitting the bolt head going down.
@cjpiper2420
5 жыл бұрын
They used wrong bolts
@PaulChristenson3 жыл бұрын
Two things...1. You need carriage bolts inside the spring tubs so they don't catch on the spring 2. You should have a washer on the outside of the cable loop connection on the bolt attached to the tailgate...to minimize the possibility of the cable loop "jumping off" the bolt
@tgregs076 жыл бұрын
Dude the slo mos🤣
@pauldavis6202
6 жыл бұрын
Tyler Gregory 9
@mattbrady49626 жыл бұрын
I feel like you've said this many times before but why don't you use the second walk- behind ?
@jakerton976 жыл бұрын
Paint the trailer wheels black.
@simonsummers91946 жыл бұрын
Simon from the UK here.... looking one mean trailer Nick. As for pizza being mooned at,Is he sure he wasn't looking in the door mirror 🤣. He spent a long time looking at it lol. Pizza is a bit heavy handed on your tools etc,I thought I saw a level on the electric drill so how he does not drill holes level is beyond me as you can always use a tape measure to get them right etc. Another quality video from the ninjas. See you tomorrow ninjas
@rmhsonlandscaping36166 жыл бұрын
Nick at 1:33 it is a clean channel I thought
@trevorgerow7166 жыл бұрын
Depending on the size of the gate you might only need one
@gamer23506 жыл бұрын
Hey pizza I saw that mod with the prince I got the same tank it’s great
@Austinsairplanes6 жыл бұрын
doesn't look like you used carriage bolts that provided clearance for the Spring which is causing your noise.
@hhhydrom31986 жыл бұрын
getting caught on the bolt head probably.
@BBROWN-mb5hk6 жыл бұрын
Pizza can't get no more bench presses in lol
@oldNavyJZ2 жыл бұрын
The spring will last longer if you use both sides.
@therealjoey7246 жыл бұрын
now atleast you dont need 2 guys to lower the gate
@maryhubbard39026 жыл бұрын
Maybe it was Buddy lol
@sgninjas
6 жыл бұрын
Mary Hubbard it was 😂
@affordablelawnservice50914 жыл бұрын
I only use one side on my trailer
@Mikeamongmikes6 жыл бұрын
Get justino to weld up a gate stopper
@jeffbaker43886 жыл бұрын
At least he can cut a straight line better then drilling a straight hole lol.
@cjpiper24205 жыл бұрын
Wrong bolts
@everythinggreenlandscapell70844 жыл бұрын
When I was younger we used to call them drive by moonings. It was funny till we got pulled over on I-95 by a state trooper. Needless to say he didn't find it as funny as we did.
Пікірлер: 74
Installed today, followed directions, works great. Took me about four hours. Balances when level with trailer bed.
1. Drill guide $10 drill straight holes, but if there are two guys on the project you should be able to help the guy drilling the holes 2. Since you moved the tubes back to avoid the bolt going inside the upright, your cable will most likely catch on the frame of the trailer. I know because I have the same trailer. I drilled the holes where the upright tubes are and used extensions on the ratchet. 3. You need M8 x1.25 x100 mm stainless steel carriage bolts (amazon) to mount the tubes. The springs are catching on the heads of the bolts you used to mount the tubes.
Round head bolt
I got the no name brand unit and they only included too long of a hardware so had to go. I did mine on one side, seems to work fine, and my gate is very heavy.
The click is because you need carriage bolts so the spring slides over the head, its catching on yer bolts.
Yeah what he said !!
Love the new trailer and everything that is going with it!! Awesome work!!
looks good my dude
trailer is coming along great Nick
I laughed so hard when you were Playing with the gorilla spring. Informative and entertaining! GREAT CHANNEL!!!
Great add on!
Great upgrade! 👍👍
So I just installed my grill a lift kit today and I had no problems I didn't even have to read the instructions and it works absolutely greatyou can use just one but it makes your tailgate come up crooked which weakens the structure it's best to put both on so it pulls the tailgate evenly
I know that jb weld putty at the auto parts store works good for plugging small holes, because you can sand it when it hardens. But I'd recommend drilling a drain hole in the bottom of every post you've drilled into, so water can't stand in them and rust.
Heads up put oil on your drill bit so you won’t dole drill bit
Trailer is coming together nicely!
I hate our gate.it weights like 400 pounds. (bobcat gates) with this we will be doing great.
That trailer is going to be nice
Tiny needs a dash cam, with all the "interesting" stuff that happens during the day 😂
its true depending on the weight of the gate. on my 10 ft single axel city rig i only have one and i have an extra for a different trailer.
Do a video talking about you’re worst experiences doing lawncare
Wouldnt it been better to just drill new whole in the gorilla to get it in the right spot lmao
I like the new slow mo shots lol
I don't understand what keeps the gate from slamming forward when the spring is pulling the gate up. I put some garage door springs on my trailer and it seems to want to pull the gate out of your hands when you lift it. I'm guessing it's something to do with my placement on the springs
Nick, make sure you plug any of those open holes that were drilled to keep water out & prevent rust on the inside of the frame.
@yahirmarcos9765
2 жыл бұрын
How?
Hi nick I love you channel I was just wondering where you get your music? I really love the music you use and I have been trying to look for some good music for my channel. Thanks keep up the great work!
Nice video I have to start putting all my goodies on my trailer also I have them sitting in the garage in unopened boxes I’ll have a fun day here soon ha ha ha
Y’all having too much fun with editing
uesing one side works but useing both sides will reduce the wear a lot
sounds like the spring knocking against one of those bolts. ramps are a very sore subject with me. I have what we call a "beavertail" basicly a flat bed Mercedes van with a ramp. company that made them decided to run a high tension spring ontop of the ramp so you constantly trip over the thing, they could do with watching your video mate. new lawn care set ups looking good! glad there is going to be less scag rolling around even if they are pretty good machines, sometimes customer service is high priority than reputation. all good having great mowers but not so much if they are sat in a workshop 2 months a year wasting possible work time.
I bet the clicking noise is from ur spring getting caught on one of the heads of a bolt
its the hexed head bolts they supply carrage bolts so spting will glide over it.
Sounds like the bolt is catching on the spring
Quick question,do you know if it works on a landscaping trailer with 4 ft walls
There should be large washers on the gate bolts so the wire doesn't pop of the bolt.
You may need a locking nut on those ramp bolts?
Simon from the UK here... Would look Great with a camera on the back to help with parking etc
It depends on size of gate if you have a bigger gate you need two but your average size gate only one is needed
I bet the spring is hitting the bolt head going down.
@cjpiper2420
5 жыл бұрын
They used wrong bolts
Two things...1. You need carriage bolts inside the spring tubs so they don't catch on the spring 2. You should have a washer on the outside of the cable loop connection on the bolt attached to the tailgate...to minimize the possibility of the cable loop "jumping off" the bolt
Dude the slo mos🤣
@pauldavis6202
6 жыл бұрын
Tyler Gregory 9
I feel like you've said this many times before but why don't you use the second walk- behind ?
Paint the trailer wheels black.
Simon from the UK here.... looking one mean trailer Nick. As for pizza being mooned at,Is he sure he wasn't looking in the door mirror 🤣. He spent a long time looking at it lol. Pizza is a bit heavy handed on your tools etc,I thought I saw a level on the electric drill so how he does not drill holes level is beyond me as you can always use a tape measure to get them right etc. Another quality video from the ninjas. See you tomorrow ninjas
Nick at 1:33 it is a clean channel I thought
Depending on the size of the gate you might only need one
Hey pizza I saw that mod with the prince I got the same tank it’s great
doesn't look like you used carriage bolts that provided clearance for the Spring which is causing your noise.
getting caught on the bolt head probably.
Pizza can't get no more bench presses in lol
The spring will last longer if you use both sides.
now atleast you dont need 2 guys to lower the gate
Maybe it was Buddy lol
@sgninjas
6 жыл бұрын
Mary Hubbard it was 😂
I only use one side on my trailer
Get justino to weld up a gate stopper
At least he can cut a straight line better then drilling a straight hole lol.
Wrong bolts
When I was younger we used to call them drive by moonings. It was funny till we got pulled over on I-95 by a state trooper. Needless to say he didn't find it as funny as we did.
2nd
3rd
Your trailer is too thick
Allll asss lol
1st?!?!?!