Nice process. Those look good.

Great video CW! Good stuff, thanks for taking us along. I always learn something!

@cw2a

Жыл бұрын

Awesome Marc!! ♥️🙏♥️🙏♥️🙏🤟🏽👍🏼

Great job CW! They all look really nice buddy! 😊🇺🇸🔥👏👏

@cw2a

Жыл бұрын

Thank you Craig!! 🤘🏼👍🏼💪🏼👍🏼😜🤟🏽

👍 thanks for the video and information.

@cw2a

Жыл бұрын

You are quite welcome Dwayne! Hope ya enjoyed it!! ♥️🙏♥️🙏

Those look great!

@cw2a

Жыл бұрын

Thank you man!! Coated as they are the GC went right on nicely. Just keep pc on thin side. ( extra sifting)

Nice looking Bullet and well organized thanks for sharing

@cw2a

Жыл бұрын

♥️🙏♥️🙏🤘🏼👍🏼🤟🏽

Yet another great video CW.

@cw2a

Жыл бұрын

Thanks Ricci. 🤘🏼🤟🏽👍🏼😝

Good looking bullets thanks for the info

@cw2a

Жыл бұрын

Thank you man!! I appreciate that! 🙏♥️🙏♥️🙏♥️

Good evening CW!

@cw2a

Жыл бұрын

Hello Dave. Hope all is well my friend!! ♥️🙏♥️🙏

I think you will like that 65gr MP. I really like mine in the AR rifles. My Savage with the Criterion barrel is too tight and too short of a throat to use them in right now. I only have about 50rnds through the barrel right now. But once it gets a bunch of rounds I will revisit it in that gun.

@cw2a

5 ай бұрын

I have t really wrung this out (you know why) Hope next season.

Those are some good looking projectiles

@cw2a

Жыл бұрын

Thanks man! ♥️🙏♥️🙏😜😝🤘🏼🤟🏽

Good morning CW 👍👍👍☕️🙏

@cw2a

Жыл бұрын

Morning Al🤟🏽👍🏼🤟🏽👍🏼

Excellent molds sir. Only 22 cal mold I have right now is Lyman 225438. I use it for 22 hornet with unique powder. I will soon powder coat them and run gas check with 2400 powder. There’s just something cool about casting for 22 center fire rounds. I can shoot my hornet for so darn cheap.

@cw2a

Жыл бұрын

Thats a fun mold! I also have. Its like the LEE Bator. Dandy in the Hornet an bee cartritages!!

@jw-sigp2258

Жыл бұрын

@@cw2a Dare I say when loaded down to 22 mag power it’s a great squirrel bullet. My unique loads are like 2000 fps. My bullets are BHN of 16 and coming out at just around 45 grains with gas check. I only make head shots on the squirrels with cast hornet rounds.

@cw2a

Жыл бұрын

@@jw-sigp2258 I have a box of Lee bators cast pure lead and GC. MAN, will they evaporate a small critter @ 15/1600!!! ( powder coated)

@jw-sigp2258

Жыл бұрын

@@cw2a That’s an awesome idea. I hadn’t even considered using powder coat and gas check to push soft lead faster. Wow I might try that with my unique loads bumped down slightly. Maybe 1600 fps. I’ve used powder coat to shoot 125 grain soft lead round nose flat point bullets to 1000 fps in 38 special.

@cw2a

Жыл бұрын

@@jw-sigp2258 yuppers!! The GC helps offset lil higher pressures and PC shields from leading. Great combo! Some think PC replaces a GC it does NOT. It will allow most hand guns to not need a GC. But pc does little for pressure and thats the real issue as velocity increases.

VERY COOOOOOOOOOOOOOOL pard !

@cw2a

Жыл бұрын

♥️😜😜🙏♥️🙏

I was after that Lee mold but now I have an RCBS & NOE so it's hard to justify another with the low volume I need. They sure look good CW.

@cw2a

Жыл бұрын

I didnt have a 55 g. Price was too good to resist!! ♥️🙏♥️🙏

I really like that silver powder coat

@cw2a

Жыл бұрын

💪🏼🤘🏼👍🏼. Its a good coater!

Good day in the shop 🤠👍✝️...just a wild guess..Boost bottles 🤣 sitting here drinkin one watching this vid looking a the cap 😎then I peeled the wrap off...😜

@cw2a

Жыл бұрын

100%!! Good for small quantities & small calibers!! Peanut butter jars are favorites tho!!!

@mckwilly

Жыл бұрын

@@cw2a yep PB jars heavy duty

@mckwilly

Жыл бұрын

Wait it's actually Pb 😅

@cw2a

Жыл бұрын

@@mckwilly MAYONNAISE Jars rock too but smaller Mouths.

Beautiful Bullets, I've heard that Lyman gets their gas checks from Hornady. Ya sure gets a lota casts out of a 20lb of alloy with those tiny bullets. 😁👍

@cw2a

Жыл бұрын

All those didnt seem ta dent the level!!! 👍🏼😝👍🏼🤘🏼😜😝😜♥️🙏♥️🙏

@walksfletcher

Жыл бұрын

@@cw2a After all these comments, I think I'll scope that 10" Hornet bbl at last and get a mold for it. With Unigue it oughta be like shooting a .22LR.

Actually, the specification for Lee molds are based on a Lead/Tin alloy, it actually states that on the product sheet that comes with their molds.

@cw2a

Жыл бұрын

🤟🏽👍🏼💪🏼

Thanks for the mention ----

@cw2a

Жыл бұрын

👍🏼🤘🏼👍🏼♥️♥️🤟🏽

Some nice looking bullets buddy

@cw2a

Жыл бұрын

Thank you my friend!! 🙏👍🏼🙏👍🏼♥️

@treetop.garage

Жыл бұрын

No problem cw

Nice work, CW. Lots of work involved when you add gas checks into the mix. 🤛🏻🔫🇺🇸

@cw2a

Жыл бұрын

Sure enough!! 😝😝😜♥️🙏♥️🙏

@hidhshsj123

Жыл бұрын

It's almost like a work out

I missed that! Happy birthday! Nice molds! Sounding a bit jaded with the YT Nazis! Understandable. #2 mold is a beaut! Very distinct lines. Thanks for the bamboo tip! See ya! Oh yeah, what was the weight on the M&P? Oh oh yeah yeah awesome army green! Also that APP is pretty handy!

@cw2a

Жыл бұрын

Mornin Timmy!!! The MP is 65g coming in @ 62/3 in this hard alloy.

Cool!

@cw2a

Жыл бұрын

👍🏼🤘🏼♥️🙏♥️🙏

Great video , I am interested in how that MP bullet does at the range , Could you do a accuracy test ?

@cw2a

Жыл бұрын

I will for sure. Just may be a while as we are into cold weather and Im not as able ta get to the range.

@pony_4759

Жыл бұрын

@@cw2a How Hard is Linotype ? How much pressure can it handle ?

Good thing you didn’t show the casting process. Might have hurt my precious fefee’s:) I’ve never tried casting for 233/556. Bet they’re potent for small game

@cw2a

Жыл бұрын

Mornin Jeff!! 😜😜👍🏼♥️🙏🤟🏽

good stuff

@cw2a

Жыл бұрын

Thank you Mr Pollard!!

I have that Lee mold. I just need some gas checks for those and 44’s.

@cw2a

Жыл бұрын

Ill send some!! ♥️🙏♥️🙏

@jh5869

Жыл бұрын

@@cw2a thanks Brother, but you’ve got enough on your plate right now. I’ll order some from Sage’s after Thanksgiving.

👍🇺🇲🤠

@cw2a

Жыл бұрын

🙏👍🏼💪🏼🤘🏼♥️

👍

@cw2a

Жыл бұрын

👍🏼🤟🏽🤘🏼😝♥️🙏

Heyyyy more gooder!

@cw2a

10 ай бұрын

Good morning mr West Coast friend!! 🤟🏽👍🏼🙏❤️‍🩹

Will this mold work for the Hatsan BT65 22cal air rifle?

@cw2a

Жыл бұрын

USUALLY a standard designed bullet isnt best in a air gun. But Im not an authority on such. Sorry I do not know for certain. Thanks for watching'

If it's harder than wheel weights why would it need a gas check ?

@cw2a

5 ай бұрын

There are a number of reasons for use of a Gas Check. One most think of is velocity and yes thats part of the equation. But more precisely its pressure. As pressures increase a GC is a real benefit. Another other is quality of the base. A GC offers better more consistent base and this is a very important part of a accurate bullet. I have not been able to get good accuracy from a bullet designed for a GC, when a GC is not in place. So as a rule, if a bullet calls for a GC its getting one if my load really requires one or not. Simply because I find better accuracy with one. Since PC I only rarely buy a GC designed bullet as most if my pressures and velocities combined with powder coat, do not require a GC. Hope that helps more then confuses.

If you powder coat do you still need the gas check?

@cw2a

4 ай бұрын

Yes, sometimes. Powdercoat does not replace gas checks. But what it does is it raises the velocity threshold where a gas check is required. So to generalize, regular revolver, cartridges, magnums or otherwise one powder coated will not require a gas check. But, I find better accuracy when a mold is cut for a gas check, when I use a gas check. When I cast a rifle bullet, generally, they're all checked. I will powder coat it and gas. Check it. I gas check, better handles the higher pressures found in rifle loadings.

@andycaldwell4828

4 ай бұрын

@@cw2a Nice. For rifle calibers do you still cast and size .001 of an inch oversize? So .308 would be .309? Or for Rifle is the diameter nominal?

@cw2a

4 ай бұрын

@@andycaldwell4828 generally speaking in 30 caliber, I go at least 310. And I go at least 1000 over usually I'm 2000s sometimes more.

@andycaldwell4828

4 ай бұрын

@@cw2a Awesome thanks for the advice!

Can those bullets be used on .22 air rifle?

@cw2a

10 ай бұрын

I know some conventional cast bullets are used in some PCP air guns. But I do not know that these are a good choice or not. Thanks for watching.

@user-pf7cf5mq9i

10 ай бұрын

@@cw2a thanks for your reply. I was thinking of buying the LEE mould to make pellets for my .22 air rifle not sure if this will work or not

@cw2a

10 ай бұрын

Id say no. But I know that NOE (Night Owl Enterprises) makes mold for air guns. Have ya looked at there molds?

Twice you say 255-55 what it said was 225-55

@cw2a

5 ай бұрын

Apologies. Im a 45 Guy to the core... 😜💥❤️‍🩹🙏💥😜

KZread is playing their games again they list comments as 2 and yet there was 5 and I'm getting that spinning wheel thing again throughout the intire video and 10 views 8 likes I first started watching when it was posted stopped half way through started it over and now it plays fine 35 minutes later

@cw2a

Жыл бұрын

Huh? Sorry man. I often see 3-5 comments but none show then I go to studio & I think most show up. So I have NOT BEEN TRUSTING any but Studio. Thanks for watchin'♥️🙏♥️🙏

@tacticalrabbit308

Жыл бұрын

@@cw2a thank you for putting these videos up for us to watch if you would like to exchange bullets some time let me know

@cw2a

Жыл бұрын

@@tacticalrabbit308 Sure enough!! 🙏🙏🙏⚡️🦌🦌🇺🇸

@tacticalrabbit308

Жыл бұрын

@@cw2a I have one for 45acp one for 7.62×39 pointed gas checked bullets and a few for 357/38 special plus round ball 451 for a .446 diameter bp pistol