Timestamps First look at the chassis kit: 0:28 Cassis assembly: 2:40 Fully assembled chassis: 12:33 Finished product: 14:44 Performance tests: 17:24 Indoor course runs: 18:51 Final thoughts: 24:21

@NovemberFoxtrotRC

9 ай бұрын

Did you have any link binding issues when you built yours? Just finished mine up and at all four corners it feels as if the links bind when flexed. Everything is in the exact same spot as yours but your axles look much more free than mine.

@Fbody_123

Ай бұрын

@@NovemberFoxtrotRCdid you ever figure out what was wrong I just purchased some axles and they feel like something is binding

@NovemberFoxtrotRC

Ай бұрын

@@Fbody_123 Just drive it. They’ll break in through that. That’s what happened with mine.

@Fbody_123

Ай бұрын

@@NovemberFoxtrotRC hmmmm ima try that when I go reverse it slowes down and the rear end lifts up a little

@NovemberFoxtrotRC

Ай бұрын

@@Fbody_123 yep same with mine. Gear breakin.

You build so many rigs and you still get that rush when you start a new one. And you transmit to your subscribers. Keep on trucking brother. Love it...

I think you should make an underground section of the course under the mini Moab part. You could make a sick cave!

Amazing content! Keep up the wonderful work and review and builds!!!

I have been excited to see this one. I have checked it out a few times, it looks like a piece of art!

Wow, only 4 minutes in and I want one! Once my home course is ready I am going to be doing a lot more small scale crawler content. Right, I'm gonna watch the rest of the video! 🙃

OK I love the look of this thing and I agree with you totally regarding tyres. I think comp pins would just walk this! Nice job Adam TTFN

I love that frame kit wow, well done. Love the color style of the Bronco R. I hope your looking at texoma RC again. As a crazy project, the slayer elite with the new cage look absolutly amazing and seem to perform very well. Iwould love to see someone build it. Thanks again for the great content 👍

Built mine a week or two ago, can’t wait to see where you set up your links for optimal flex!

Really like your content keep up the great work Adam!

Thank god for this. Really appreciate the build video. Just got mine in and realized there’s no instructions or videos on their site on how to build it 😅

pretty sick build!

It looks really good. Nice colour combo. It's funny how it hooks up very well on the backyard rocks but the indoor course is too slick.....horses for courses I guess!

Precision quality 👌

I just bought my first crawler. 1/24th scale in Hyannis a few weeks ago. My brother-in-law got me in to the hobby. And I found you. And realized you're based in Cape Cod. Super cool keep up the good content it's great

@CapeCrawlers

11 ай бұрын

That’s awesome! Did you get it at Centerline hobbies? That’s our go-to shop. We’re there all the time!

@perrinconsolati3455

11 ай бұрын

Yes!!!! That's where I went...my brother in-law and I were in heaven. Great shop!! I live in the berkshires in western Mass

Great video as always.

For that understeer issue, try to switch your front tires left to right so the treads are backwards, it's an old school 10 scale crawler trick, I run most of our rigs that way.

@CapeCrawlers

9 ай бұрын

Ahhh I will try that!

That's a really good little motor man I put a 13 tooth pinion on it that way it bumped up the Wheels speed but kept that slow crawl the only complaint I have it's amazing motor super strong honestly it's stronger than several of the other micro Motors surprisingly cuz it's littler but it's something different in that motor you can hear it by the sound I heard Adam say that and I didn't know what he was talking about I bought one and it's definitely for sure almost like it has more magnets closer together or something it does get warm though

Do you have an idea of how i should take my scx24 on a plane? Usa to Australia

Initial comment, I have been digging this item since the 1st email

So Adam, since finishing the build, what is the correct fix to getting the rear axle moved further back, to use the rear body mount correctly? The body seems to still sit a bit too far back, in my opinion, on your finished rig.

This Silverado body i have for you would be the perfect match for that chassis....I got you, Adam. I think you'll agree. But, we shall see. I'll send it when i send the CJ bodies back to you....i think youll love this hardbody

Wonder if they have a chassis for the SCX24 Gladiator?? 🤔

could you please try adjusting the upper link mounting positions but keep the tires the same. Thank you and keep up the great content.

hi can the injora metal gearbox fit the furitek brushless motor? Kokomo motor

love this thing one of my favorites so far i agree with the tires tho i don't think they suit the build👌💪

Im running c10 rear links and gladiator rear links on my new build

What about dluxfab they have a 24 chassis now

Nice chassis!...now i gotta get one...lol

Will any of the truck bodies work with this chassis? Would be cool to build a power wagon scx24 comp

@CapeCrawlers

6 ай бұрын

Possibly. It works with the X factor body which is the same dimensions as the gladiator body. I think the power wagon is similar sized

Looks amazing! I really don't like that ridiculously long rear. The comp upgrade kit i think shortens that up? Extremely clean belly on these. I also like the shock towers NOT built into the frame rails, so that's a big plus for me.

@MrsRabbit8

2 ай бұрын

I really appreciate your balanced review. Too many channels kiss these companies butts. It seems the front links are a bit long, i see these get hung up around the skid even though the skid is so smoothe, i can't figure it out, maybe it's also related to the under-steer, with the balance throwing it to the side. I dunno. Again, i really love how clean that is on the belly, and the modular shock mounts. Thanks again!

hey cape i have a trx4m and i am searching for a new chassis so i am interested in a injora kangaroo lcg chassis, so i searched for a review but could not find one so the question is if u can make a review of the injora kangaroo lcg chassis? ( u prob will get alot of views since there are no reviews of the product)

Trank you for the cool content

I'm putting my kit together at the moment. I got the LGRP Creeper motor and the LGRP Billet Transmission, am I supposed to use the .5 Mod pinion for that combo? I'm assuming so but just checking because there are also a couple other pinions I received.... Btw, great video!

@CapeCrawlers

10 ай бұрын

Thanks for watching. I’ve always used the mod 3 with my LGRP transmissions

Wooow it super cool rc

So how does this compare to the Cheat Code ? I am hesitating with the Cheatcode because of the printed skid, this might break or when rebuilding often ruin screw threads in the soft plastic - and since i am in europe i can't easily order another. Only reason keeping me away from it to be honest.

@CapeCrawlers

11 ай бұрын

I wouldnt hesitate to buy the cheat code if I were you. It is so well made and that skid is beefy! The LGRP kit is right up there with the cheat code in my opinion. I need to sort out my tire setup and link positions and then I think it will be on par with my cheat code builds.

does the gladiator body work on this chassis? or do i need to get the r factor conversion for it to work?

@CapeCrawlers

Ай бұрын

It should work without the r factor kit. May take some slight trimming but it should be close right out of the box

Great video Adam. Are you still stoked on your creeper motor ? Debating between Creeper and mini Komodo. Loving your content. Thank you.

@CapeCrawlers

Ай бұрын

Love the creeper motor. Have troubles sometimes with the pinion slipping on the motor shaft but thats it. Performance has been great.

Make a video on the mofo 1.8" wheels! I have not seen much on them and they look interesting

I stripped a screw in one of the LGRP axiasl... Im trying to figure out how I can get that screw out without causing anymore damage... Any suggestions? THX

@2acRC

11 ай бұрын

Try a torx bit

@wingnutbert9685

10 ай бұрын

Need more info! :D Stripped what? The hex head? The thread of the screw? The tread in the parts? Is the part plastic or metal?

Nice!

Flip the body mount and raise the body hold tower

You didn't get the cage? Or the billet bits? Trust me Adam the whole package is worth it. Amazing fitment and style👍🤠👍

@snorrevonflake

11 ай бұрын

Unfortunately half of the stuff is currently not available, wanted to order but cage and billet parts out of stock .

Yesss! Are you going to get the x-factor when it becomes available again?

@CapeCrawlers

11 ай бұрын

Probably. I love their kits!

I notice you do your shocks upside down. Is there a reason for that? Just started watching your channel about a month ago

@CapeCrawlers

5 ай бұрын

I find they bind less if run upside down

Man, them some chonky frame rails! A bit puzzled by the shock towers. Why go plastic, and have all the extra screws when they could be just part of the alum. frame design?

@CapeCrawlers

10 ай бұрын

Aluminum options are available as an upgrade. $99 for the kit is the cost of entry, then it goes up from there as you add aluminum parts

@wingnutbert9685

10 ай бұрын

@@CapeCrawlers Nice! I actually meant the towers as one piece with the frame rails. Cut out as part of the frame as one piece. But I see the towers can be moved fore and aft so that's better having them separate. 👍

looks like the tires are just too stiff maybe try cutting the foams thinner and keep them stiff but they still will conform like look at 25 mins in when you grab the rock with your right front tire there is no conforming its literally barely touching on one lug and the tires wont compress maybe even try foamless and see if you lose much on sidehill

you 100% dont need the double barrels, theyre just too much, they bind, and let the axles get too far from the chassis. Beneficial rarely. Ive ran alot of different set ups with them, and i used to be a fan, but ive now realized that just a few millimeters over the stock shock travel is ideal.

Gladiator rear links would solve that problem

I love everything about it but for that price, there should be no issues with the body being mounted, let alone any issues 😂

I guess all that leaves is a hard park and j.e.c. to do

How good are the printed parts? It looks fragile.

@CapeCrawlers

11 ай бұрын

Shock towers and sliders are solid. Supporting components are a little fragile. The bumper would be solid with the optional cross brace

@JD-tl7ld

11 ай бұрын

@@CapeCrawlers Good to know. So far, I've stayed away from anything printed.

That's a really cool little kit. The 3d parts look like they're SLS prints. High quality looking. Would FCX24 axles bolt in there? That would be a nice combo.

@wingnutbert9685

10 ай бұрын

I noticed that too. I'm really not a fan of the look of printed parts. The lines on just about all them look like crap, to me. And way to much sanding to get them smooth. These almost look injection molded and media tumbled.

Done.....lmao. yep i bought one.....

Well shoot I just realized I have my frame rails inside out

Who comes there after watching short video of it 😅

I don't think the Styrofoam is a good benchmark for performance. A lot of tires/rigs don't do well on it, because of the low-grip & how Styrofoam is crumbly. I think you should use an outdoor course for a new testing/benchmark for rigs. Since 99% of comps & people go out on the rocks to begin with.

@wingnutbert9685

10 ай бұрын

Yeah, have to agree. I really think painted foam and plaster are big mistakes. Cheap and easy. But cheaper and almost as easy, but way better is a www.youtube.com/@REACTIVETERRAIN method. So much more durable and realistic. For terrain and indoor course building, they're the ultimate go to. WAY under viewed and sub'd to for sure!