New Rock Racing Buggy from Crane Axle and Wide Open Design
Автокөліктер мен көлік құралдары
SUPER ATV www.superatv.com
RCV AXLES www.rcvperformance.com
SPYDER OFFROAD: spyderoffroad.com/main.sc
RUSH OFFROAD PARK: www.rushoffroad.com
The Redneck Rocket Ship is a new rock racing buggy from Crane Axle and Wide Open Design. The buggy was designed and built by Adam Woodlee and his crew and is finally ready to compete. They have created this masterpiece for rock racing, hill climbing, trail riding, and the testing of new products that are developed at Wide Open Design and Crane Axle.
Expect to see this buggy racing in 2020 rock races and hill climbs.
Specs:
CHASSIS
Chassis: WOD Custom Redneck Rocket Ship Chassis
POWERTRAIN
Engine: Supercharged LS
Radiator/Fans: Griffin 31 x 15 1/2
Exhaust: WOD Stainless Custom
Transmission Make: TH400 - www.wideopendesign.com/off-ro...
Transmission Shifter: Art Carr/Winters Shifter - www.wideopendesign.com/winter...
Transfer Case: Atlas - www.wideopendesign.com/off-ro...
Fuel Containment: WOD Custom Aluminum Fuel Cell
BODY/INTERIOR
Skid Plate/Material: 3/8 6061 Aluminum
Steering Column/Wheel: Longacre 13 Inch Steering Wheel/WOD 24" Steering Column - www.wideopendesign.com/13-inc... / www.wideopendesign.com/wide-o...
Brake Control: WOD Hydroboost Kit - www.wideopendesign.com/wide-o...
Seats/Harnesses: PRP Alpha Seats/PRP Harnesses - www.wideopendesign.com/off-ro... / www.wideopendesign.com/off-ro...
Safety - Fire Extinguisher: H3R HalGuard 2.5lb Halon Fire Extinguisher - www.wideopendesign.com/halgua...
Winches - Front/Rear: Warn 9.0 RC Winch - www.wideopendesign.com/warn-w...
DRIVETRAIN
Suspension/Type/Materials: 4 Link, WOD 7075 Aluminum Links, 1 1/4" QA1 Rod Ends, 7075 Billet Trailing Arms - www.wideopendesign.com/alumin... / www.wideopendesign.com/off-ro...
Shocks: Radflo 3" 5 Tube Remote Reservoir Bypass Shocks, 2" Coilover Remote Reservoirs, 3" 5 Tube Piggyback Bypass Shocks - www.wideopendesign.com/off-ro...
Bump Stops: Radflo 2.0 x 4" Travel - www.wideopendesign.com/radflo...
Brakes: Wilwood Light Weight Caliper - www.wideopendesign.com/off-ro...
Driveshafts: WOD 1410 Heavy Duty Driveshafts/WOD 1410 Carrier Bearing Kit - www.wideopendesign.com/off-ro...
Front Axle Housing: Crane Axle 14 Bolt with 3.5" (1/2" Wall) Tubing - craneaxle.com/default/product...
Front Inner C's/Knuckles: Crane Axle Magnum Knuckles - craneaxle.com/default/magnum-...
Front Differential/Locker: 40 Spline Spool - craneaxle.com/default/catalog...
Front Ring & Pinion/ratio: 5.13 Yukon - craneaxle.com/default/gm-14-b...
Front Axle Shafts: 40 Inner/47 Outer Spline Shafts
Front Drive Flanges/Hubs: Ouverson Spindles and Wheel Hubs
Front Steering Setup/Arms: Crane Axle Magnum High Steer Arms - craneaxle.com/default/magnum-...
Rear Axle Housing: Crane Axle 14 Bolt with 3.5" (1/2" Wall) Tubing - craneaxle.com/default/product...
Rear Differential/Locker: Spool 40 Spline - craneaxle.com/default/gm-14-b...
Rear Axle Shafts: 40 Inner/47 Outer Spline Shafts
Rear Sway Bar: Currie AntiRock Swaybar - www.wideopendesign.com/off-ro...
Wide Open Design www.wideopendesign.com/
Instagram: / wideopendesign
Facebook: / wideopendesign
Crane Axle craneaxle.com
Instagram: / craneaxle
Facebook: / craneaxle
Пікірлер: 68
Nice buggy and Great job in the description with the part list.
Excellent Video. Great Job!!
Absolutely amazing engineering
Best customer service in the business! Nice buggy Adam
From a fan perspective and watching from MadRams channel for years now I think it's pretty obvious rock bouncers should have never bounced. Suspension that works and the difference that makes is pretty amazing to watch. I think a lot of this can be some of the Ultra 4 influence on the sport. I also think TC brought this to the forefront of the rock racer suspension design. The unfortunate drawback to these buggies is of course the expense. Rigs like the one above and TCs I know are prohibitively expensive for most owners to buy or even build. Great video as usual MadRam and I look forward to this buggy competing with TC. At least I hope it does. Thanks to anyone that reads this rambletron.
@MadRam11
4 жыл бұрын
You are exactly right man. They plan on racing this buggy a lot so we are going to see how it does for sure!! Thanks for watching and supporting the channel
@BenDrinkin1
4 жыл бұрын
MRBLACK947 Yeah, good to see some motion ratio on the shocks finally.
Beast I love it amazing job 🙏
Fantastic design
Great ideal use right parts easy to get
Looks sounds good
Buggy is bad ass and its gonna hurt some feelings!!💯
Very nice 👍🏻
Love this buggy
Cool, thanks
awesome buggy
Very cool.
What's the cost to build a sister buggy?
These are AMAZING works of art, so much so that you'd never want to get them dirty!......Naaah, only kidding.
l like it👍👍👍
Beautiful! I'm writing a letter to Santa Claus, i desperately need need one.
@danielwright3754
4 жыл бұрын
@RIDEROFTHESTORM 5150 😆 I always get socks. Imagine waking up with that thing in the garage!
@freeartbyevh5202
4 жыл бұрын
Daniel Wright my too I will writing a letter to Santa 🎅🏻🤶
Sounds alot like the Rat Rod buggy!
What happen to that rear engine buggy u had with a Connecting rod hanging out the oil pan
@MadRam11
4 жыл бұрын
Woodlee sold it several years ago
Boa noite tudo bem, tenho interesse em comprar , qual é o valor ? E se é possível mandar para o Brasil
Why not run a 12 volt hydro boost ?
Good afternoon, I am from Brazil and I liked your projects, I would like to know if you only sell 3D PDF projects so that I can build the chassis here?
@MadRam11
2 жыл бұрын
If you contact Wide Open Design they may can help you out. Give them a call or email them.
@thiagobatistadesouza
2 жыл бұрын
@@MadRam11 Would you kindly give me the email and WhatsApp number. thank
That was a whole lotta video for just seein 15 seconds of it in action at the end... but yeah nice rock bouncer~
Some of the newer buggies are lower with more lower reminding me of the formula offroad guys
Wish I could just mail you a check and have you build me one! Gotta pick up some lotto tickets I suppose!
Nice but won't beat outlaw as my favourite lol
Красиво!
I don't see anything out of the norm with this man's "heels" but apparently they are big ones....😁 Nice rig for sure though.
If I have to ask is it to expensive
Bad Ass!
Cool rig, Wes drives this buggy?
@ScoobieSwisher7413
3 жыл бұрын
Yes, Wes owns the motors and transmissions used, he usually goes with cheaper LS's, and puts a super charger on it.
So who owns this bouncer Wes or wide open design
@ScoobieSwisher7413
4 ай бұрын
WOD, but the motors used are Keans.
Dope!
@MadRam11
4 жыл бұрын
I saw your first comment, and I will say that Wide Open Design has been around way longer than Busted Knuckle. So you can take it how you want
@DirtRoadBoyz2
4 жыл бұрын
@@MadRam11 yeah it didn't take long looking at it to figure it out. Gotta admit the designs between the 2 are similar. Bouncing is getting like nascar. Big builders going head to head all weekend. Makes for some damn good events!
@DirtRoadBoyz2
4 жыл бұрын
@@MadRam11 no hate. That's a weak mans job. They're getting more badass with every season.
@Hotrodsvids
4 жыл бұрын
Looks great, top notch company. Who gonna be the wheel man?
@jarredlaney6083
4 жыл бұрын
Wes
What's a unit like that cost?
@ScoobieSwisher7413
4 ай бұрын
100k
What a bad ass rig. I bet that cost 150k or so. Boy does it sound good too. An ol boy can drive. Bet that's a good partnership.
Can I buy this buggy as shown??
@MadRam11
4 жыл бұрын
Call wide open design and talk to them. Wideopendesign.com
@ScoobieSwisher7413
4 ай бұрын
Yes, he emphasized that in the video.
ok how much $$$ ?
@missmymountain
3 жыл бұрын
I've wondered what a cost estimate would be too. My guess = ~$110,000 for major components without labor to design, finish, and assemble: Winch = 1,800 Axles = 28,000 Steering = 5,300 Shocks/bump stops = 10,000 Engine = 15,000 (middle of the road guess) Transmission = 5,500 Transfer case = 3,800 Link bars = 1,750 Seats = 2,500 Trailing arms = 12,000 (material and machine time estimate) Sway bar = 700 Radiator = 700 Wheels and tires = 8,000 Chassis = 6,000 (basic price for generic) Miscellaneous budget other pieces and parts = 10,000
Very similar to the busted knuckle riout chassis
@MadRam11
3 жыл бұрын
Obviously you must be a new fan based off your questions. But I can assure you Wide Open Design didn’t copy Busted Knuckle. Wide Open Design has been around way longer than Busted has. You might want to do some research before you make that bold claim. As far as who owns the buggy. It belongs to wide open Design. Wes is just the driver and he owns the engine and transmission.
@robertabney3533
3 жыл бұрын
Thank you for the info
@ScoobieSwisher7413
3 жыл бұрын
@@robertabney3533 If you saw Gold Rush or Bad Influence side by with the Rocketship you would see the difference, this is much lower and a little wider than the Riot.
Перевод бы!
it is a pity that without translation into Russian :( Жаль что без перевода на Русский :(
🇧🇷🇧🇷🇧🇷🇧🇷✌✌✌✌
Uh Oh... Will Tim be challenged?
@MadRam11
2 жыл бұрын
This buggy has been out for a while, Wes is an awesome driver but he had a pretty serious accident that unfortunately set him back this year. Hopefully we will see him again in 2022.
Badass I do electrical I like hiding the wiring inside the tubes buggy looks clean I need a frame before I die I busted it all my life probably started too early killed my knees but to ride around with my son and leave him behind something cool I lost my uncle last week bury him this Wensday he owned jaramillos plumbing socorro nm .lifes to short..
first hi