Just drove two hours to go to direct tools and let me say that place is awesome. Got a Ryobi hole saw kit a 7 1/4th miter saw and a 7 1/4th circular saw all for $91. Worth the drive thanks VCG for showing me that place

Vince I've had mine for a week and still haven't opened it. But everything I've seen it's a beast . Update finally got to tear into some 3/4 " osb yea its seriously a beast. Its my experience that this saw is better than a corded saw . Use it on 2x4 , 2x6 . Plywood, paneling. It dosen't matter . Eats it up .

Very nicely done Vince !!! I appreciate your time and effort to help us the VCG in making better and more informed choices when buying tools and accessories. Thanks again for sharing your thoughts and videos, Rodney

@VCGConstruction

5 жыл бұрын

Thanks Rodney we appreciate it!!

these saws are awesome. I love my flex volt worm drive saw. make sure you keep a corded with you. better to have and not need then need and not have.

If memory serves me correctly, a standard corded skil saw is around 14.5 pounds and the mag 77 is a little over 12.5 pounds. So this hit right in the middle which is pretty good since the DeWalt cordless felt heavier than the corded skil. Even with the extra heft, the time saved by not rolling out or relocating a cord or hose makes these cordless tools total game changers. As long as the weight is distributed properly it has little effect on usability. FYI for the uninitiated the rafter hook we call a sky hook and the “base plate” we call the table in the field. The notch in the blade wrench served two functions, one as stated to unscrew the brushes for cleaning or replacement and it also can break the diamond center out of the blades when required.

You should do a Makita vs DeWalt vs Milwaukee test. Plus there battery life and cost.

@larryhand7219

4 жыл бұрын

Add rigid to the list

@comixof2morrow

3 жыл бұрын

How dare you leave the Kobalt XTR out...XTR tools are amazing. I bought the 3 tool combo that came with the drill,impact,led light,hammer drill bar grip attatchment, 2 batteries,charger,hardcase,and with that purchase I got a free Kobalt Circular Saw bare tool.

The screw driver on the end of the wrench is for twisting out the diamond knockout on a new blade.

@calebdanny1485

2 жыл бұрын

InstaBlaster.

Haha I'm still on the board, awesome! I like how saws are starting to make the blade guard handle shorter so as not to block the saw dust vent.

yeah, I bought it.. it is pretty cool to be cordless on the roof as you over-frame a log home.

the screw driver on the wrench is also used for the rip guide that slides into the side of the deck. use it on the daily for multiple rips

@mikebruner4125

4 жыл бұрын

what rip guide fits this??

Just bought mine on a Super BMSM Deal at HD for 113 bucks 🤯. I can’t wait to give it a spin. Thanks for vid Vince! You Rock!!

@gregsizemore5919

2 жыл бұрын

Same. Got mine worth the 1/2” mid torque

@organicthug5220

2 жыл бұрын

Wait what!??? And I paid 269 tool only no bag. 🤦‍♂️

@jah5075

2 жыл бұрын

What's a bmsm deal?

@marcher78

2 жыл бұрын

BMSM = Buy More Save More

@dabstars6988

Жыл бұрын

Absolutely no way

Liked the vid, & honest thoughts....about dust collection. When saw NPS, was thinking same thing. Congrats on the saw & looking forward to the test results afterwards! Wish able to buy, but not in the cards just yet; still rocking my corded Skil circ saw, which is great. Thanks for the vid✌🏼

Thx for the demo vince just ordered mine cant wait to try out when it gets here.

Vince, I understand your love for a left-sight saw, but as a lefty, I thought the manufacturers finally thought of me with the right-sight circular saws. Lol!

dust collection never really gets all the dust, just keeps it down so cleanup isn't so bad. It seems to do as good as if it was corded. I like worm drives they seen to allow for more control and straighter cuts. Probably most because of the change in leverage points when operating them.

Is it just me or does Vince look like a Ghostbuster with that saw in hand and vac on his back?

@VCGConstruction

5 жыл бұрын

🤣🤣

@DrFearCo

4 жыл бұрын

@@VCGConstruction Just dont cross streams

@nicholassinclair4589

3 жыл бұрын

YES

@smith13579100

2 жыл бұрын

He looks just like mini me.... 😂

@superevilnine9

2 жыл бұрын

Lol

Great unboxing & video I’m sure my husband will add it to his birthday list!

Whoever mentioned the reason for the tip on the includes tool as the way to pry out the diamond arbor is a boss genius like me.

Defenetly going to buy AND I cant wait for TTR Dewalt vs milwaukee worm drive saw

@baileydyson2845

5 жыл бұрын

And Makita....?

@Dogecoin831

5 жыл бұрын

Bailey Dyson makita is also great just personally would rather see Dewalt vs Milwaukee

@baileydyson2845

5 жыл бұрын

@@Dogecoin831 fair enough I've used both the DeWalt and Makita alot, and find the DeWalt has a tiny bit more power... Doesn't make a difference. However would choose the Makita 100% of the time you can't beat it's quality and smoothness. Will be interesting to see how 18v vs 36v vs 54v goes.

@Dogecoin831

5 жыл бұрын

Bailey Dyson i guess just comes down to what platform your already invested in

@felixlallangas6983

5 жыл бұрын

I'd love to see DeWalt vs Milwaukee vs Makita.

Good job! I like your tests and your attitude. Great stuff... you made me laugh at the cut hight comment. I thought that but dismissed it in my mind because it was no problem for you lmao.

This KZread channel comes threw with information you need to get the job done been in the union 7 in a half years and always wondered about the power of cordless now a days

@VCGConstruction

4 жыл бұрын

Thanks Homie we appreciate it!

I would love to get my hands on one of these bad boys, I would like to see how well it does cutting through 4x4s at an angle

got mine a few days ago and i love it just cut some 2x4 with the 4.0 batt did ok need to get that 6.0 HO batt for sure!!

Vince, I’d like to see the following tested if possible: Dimensional lumber OSB 1/2 & 3/4 plywood 3/4 Baltic Birch plywood, taped cut line (prevent splintering/tear out) I’ve been thinking this is the circ saw to pick up, glad I waited!

My mag 77 blade wrench has a tab like that and the book says to use it for popping out the round harbors from a new blade to give you the worm drive diamond harbor.

The hole in the dust port induces a venturi effect. You get the same effect when you leaf-blow by backing over leaves, and they get ejected.

I NEEEEEED IT!............ Ok I want. I’ve also been waiting years for this saw.

That friggin' ad right as you are about to make the first cut. 😂 Even if the dust collection wasn't perfect, you could see how much it caught in the backpack vac! I have the DeWalt 7-1/4" XR circ saw, and I wish it was left side line of sight.

@MrSubaru1387

5 жыл бұрын

Can't stand the FLEXVOLT 7-1/4 sidewinder. I just can't do blade right saws. Gotta stick with my rear handle Makita 36V.

Shnugg!!! Very Kool!! I can’t wait to get mine!

Hey Vince. Although, I'm in the Milwaukee 18 volt line and use them often. I bought the 48 volt Skilsaw rear handle wormdrive saw. Have been using almost everyday. I can't believe how much power this machine has, but its power is there when I need it. Thanks for the video 📹...

I initially bought the right side blade m18 7 1/4 circular saw... i will tell you this... i loved it but was really interested with the worm style so i ended up returning the right side blade and bought this worm style circular saw.... these are my pros/cons for it... love the ways it cuts (like butter), weight is a tab bit heavier but it has the well balanced feel even with the battery on... i dislike the dust port... wished the additional port attachment didnt have a hole. They should have it closed instead.. So unlike the right side circular saw where dust isn't blowing on you... i will tell you this... with this worm style circular saw and the way Milwaukee outfitted it's dust port.... dust will surely be blowing on you....With that said i still have no regrets with adding this beast to my line of milwaukee tools.

Cool vacuum. You look like a ghost buster.

Hey Vince while I was watching your video on the new w saw something funny happen... the KZread commercial in the middle of your allocution... guess by who? De Walt !!! That was funny ! Good day Vince!

I use the 6 1/2 left line of site and the 7 1/4 right line of sight sidewinders. And they are great only thing i didn't care for is how out of square the 6 1/2 and was wondering if theres a way to square the blade and still keep the degrees on zero

Great stuff. Loving this tool. TTR TIME!!

With your enthusiasm for power tools and video quality you guys should be blowing up as you very well deserve.

@VCGConstruction

5 жыл бұрын

Well thank you Edgar we appreciate it!!

@davidmichaelseven

4 жыл бұрын

No think 🎳 bowling alley material💯😂🥊

I have this Milwaukee rear handle and I love it and it’s light..

I'd like to see run times / performance with the HO 3.0s since i have a lot of them now

@JasonLee-qj8ts

5 жыл бұрын

the early evidence from other reviewers is not good with the 3.0s.. thermal shutdown etc... the 6.0 HO is probably going to be the lightest HO battery to push this blade with confidence. In fact I found in one comment where some people thought the 6.0 HO would have more grunt than the 12.0 since a smaller capacity cell (not size) was used and as such would favor peak discharge over the 12.0 HO which uses a max capacity cell. I think you might find that a 6.0 HO could win a side by side rip time test against a 12.0 HO.

I use the screwdriver end of the wrench to remove the diamond on anew blade

Cut some 6x6 green treated and LVLS any good saw should be able to cut sheet goods and 2x4s all day i have the 6 1/2" left and want to get the 7 1/4" but i have a skill saw and want to know that im not going to be stepping down in power

Hey Vince as a physics guy the hole is there to provide more suction at the point of entry for the dust. Think of it like an air vent in your plumbing. Air is going to take the path of least resistance so the air channel is going through the house, the dust moving through isn't going to want to escape that path because it would take more energy to exit the air channel than just follow it (eventually ending up inside the vacuum). Great video, love how you test tools.

@VCGConstruction

5 жыл бұрын

It helps to keep air velocity up?

@ImaITman

5 жыл бұрын

@@VCGConstruction Keeps it up, but also makes it greater than if you didn't have the hole.

@VCGConstruction

5 жыл бұрын

Got it!

Just replaced last year’s version with this new one from OPT. Used it to trim down some wood doors with a Kreg accu cut track saw system. Would love to see this against the Hilti, Makita, and Dewalt in a #ttr

@marcowens3522

2 жыл бұрын

👍

Time to TTR some Circ Saws!!! 🙏😉👌

Omg this is the first time I have seen Vince without any facial hair!!!

Wait till Christmas time they will be on some kind of deal just like there last 7 1/4 saw that came out last year this time

Intro cracked me up dude.

CONGRATS TO VCG ON 105,000 SUBSCRIBERS !!! 👍👍

@VCGConstruction

5 жыл бұрын

Thanks Brian, we appreciate it!

Bad ass saw Vince! Just cut anything with it! Get to ripping! I want to see more!

Vincent "I will say this" Carneglia Love this channel, bro. Great info

I have mostly Milwaukee tools but I went with the battery powered true work drive skill saw.

I got this saw last month and it's a beast. Tho I'm always covered in saw dust and you'd be surprised on how much saw dust I manage to get in my pockets

@rickcolumbo3148

4 жыл бұрын

Get yourself a nice rugged leather apron

@theconcretecaveman6266

4 жыл бұрын

One thing I hate about this saw is the dust bath..

@markgonzalez8828

3 жыл бұрын

@@theconcretecaveman6266 does the Milwaukee vacuum work on this? It’s really small pipe

@theconcretecaveman6266

3 жыл бұрын

@@markgonzalez8828 it works to a certain point.. with the vacuum hooked up you will catch about 80%of the dust, it creates so much dust that the 20% is actually alot.. and without the vacuum hooked up, we'll prepare for a shower of dust.. lol it's really powerful though.

@markgonzalez8828

3 жыл бұрын

@@theconcretecaveman6266 I’ve tried the dewalt version. Makita. Don’t see as much dust as I did on this video. Concerned a bit. I would still buy it but wait on a deal . Right now I can get it for 175 plus tax. On Home Depot when you add the other circular saw together. But I’ll just cancel the other one

Only because no one has done it yet. Tool and 12.0 HO battery is 14lbs. Pretty good in my opinion. Great video VCG. For a test, I think you got to rip a piece of 4X8 on the 45 degree angle. Does anyone use the cordless band saw? if so, how well do it work?

@jacobwrona

5 жыл бұрын

Robert Capouellez i use the older brushed m18 band saw and it is powerful and very handy. I tried to use the newer m18 fuel band saw and it was almost impossible to use one handed because of its larger size and heavier weight. The m18 fuel bandsaw is nice because of its variable speeds though.

Hey Vincent love your channel! On the Makita vs Skill 77 showdown, you said batteries are the Devil 😈 lol

Definitely test with materials that kill most cordless circ saws; such as 2*12 lam beams.

Love your reviews. Has helped me in purchasing tools easier. Keep up the good work

I use a Milwaukee white blade on my miter saw. No complaints about it.

The screw driver on the end of the wrench could possibly be a tool to break the diamond insert from the standard blade. Like the dewalt rear handle has built into the angle adjustment. Black and yellow all the way !!!

Oh man thank you for making cuts with the saw!!! I was scared u you weren’t going to. Cut everything. My dad has been waiting for this saw since forever

I got one from HD online and it's awesome lots of power

GO Vince! Had to watch your unboxing as I found an "open box" deal for under $200. 😃 Been a while since I've seen that clean shave, lol.👍🏻 Update 6/10/2024 Just saw one in unopened box for $100 😮

Gotta tell you....You might have sold me on the rear handle. Never thought I would have said that.

TTR it! If you can use some maple and oak and all saws with the same finish blades that would be cool.

Unfortunatelly i'm from Italy and HD doesn't ships worldwide, but I bought this beast from Ebay for 229 bucks +shipping and import fees, total of 358 bucks. Can't wait to have it in my hands! 🖤❤️

@cliffordmontana4562

5 ай бұрын

Man, you Europeans get ripped off on EVERYTHING. I feel sorry for the good people there, because liberals have ruined the place and made it so expensive to live. I can get this saw in the states for $180 a year later.

I think this is my favorite video of you. Funny as hell.

that is a sexy looking sawing can't wait until I'll see them in stores and fill it and see how comfortable it really is

I'd like to see a long time right hand saw guy convert to the (worm drive?) I want to know if it is actually more convenient. People talk about a better line of sight to the blade, but does it really make a difference, if you've been using a guide, speed square, fence, hand or something else to insure good cuts? Thanks

When it comes to worm drive cordless i’d go #1 Dewalt flexvolt #2 makit 2@18=36 v and last Waukee. Just my preference

You look about 15 years younger took me 5 mins to realise why 😂

Please do a test with all 3 work drive saws (Makita miliwake vs Dewalt

Yes, I ordered mine yesterday, 100 CDN $ off, couldn't let go by 🤩

Is the screw for the dust port a flat head? If so could that be why the blade change tool has the screw driver part to it?

Nice thanks Vince!! Wonder how it holds up against the current generation Skilsaw...?

You should test out the new Hercules circular saw, looks pretty good!

There's a Milwaukee July tool blitz going on at Dixieline lumber right now. I picked up a kit for $379.

Thanking about getting it haven't made up my mind already have Milwaukee 7 1/4 18 V

The 3.0 battery works as well just not as long.

Milwaukee Kit $449, Dewalt Flexvolt Kit $300, Makita 36V (2x18V) Kit $250

@Colaaah

4 жыл бұрын

Yeah, you get what you pay for 🤣🤣😂😂😜😜

Been waiting for this saw to come out! Can you cut some plexi or lexan in your test? Thanks Vince!

Got to test this against the makita 36v

I love the white blade so much

Looking good brother!! Great vid!!

@VCGConstruction

5 жыл бұрын

Thanks Israel I appreciate it!

I have a corded left hand circular saw, made by Porter Cable...bought it new in 2001...now, I can't find one. "Left hand" saws just make sense for right handers!

Corded wormdrive is KING, that one can be queen especially with that purse🤫

Should do a TTR vs the corded skilsaw

Thank you

Works well with the 3 in 1 vacuum

I like this saw but I'll stick with the 6.5" for now as if i need to cut anything bigger I tend to use the 305mm mitre or table saw.

That wrench also takes out diamond hole on saw blades

Sweet thanks.

Lmfao at the singing like a diamond and let our guard down lmfao

DeWalt vs Milwaukee worm drive test, what you think? and yes La Famillia, Makita too.

Great video Vince you look like you’re ready for a bowling match ha ha ha ha ha ha ha ha😂😂😂

I'm curious why the run time on this saw is listed as 570 cuts per charge when last years 2732 model is rated at 750 cuts per charge with the same battery and what appears to be the same motor. I have the 2732 and have been happy with it, I would prefer a left line of sight saw but have gotten used to using sidewinder style right line of sight saws and don't think I would purchase this one especially if its rated run time is a lot lower. The dust collection seems to work about the same as the 2732 and the table saw, which is to say not very well but definitely better than nothing. I think Milwaukee missed the boat by not expanding onekey functionality to allow a hypothetical onekey vacuum to wirelessly link to any onekey tool and auto start/stop the vacuum when the tool is being used.

@tannerwharton4670

4 жыл бұрын

Youre acting like you couldnt just have a back up 12 ah battery. You a single battery for whole lineup kind of guy i see

@GamerCheatsForAll

2 жыл бұрын

@@tannerwharton4670 man wrote a college thesis about a battery lmao

can you test it against last year right line of sight 7 1/4

Watched the video with the cordless makita drywall sander. Seeing the 3 in 1 today made me wonder how well it would work with the sander. What do you think? Or is there a similar but better option?

@VCGConstruction

5 жыл бұрын

I’d use the Makita backpack solution with the Makita drywall sander !!

Do you recommend the Milwaukee rear handle circ saw or skilsaw battery. I’m already on the Milwaukee platform but would rather have the better of the 2. Thanks

Great video, great saw.

@VCGConstruction

5 жыл бұрын

Thanks Clint!!

🤔 I think they should have a remote on switch on the vacuum with Bluetooth communication to the saw, so vac comes on only when saw is on!

@VCGConstruction

5 жыл бұрын

Good idea

I need to know more about the bag pockets and bag strap please.

I can't wait for the Ryobi rear handled "worm drive" saw. It's going to be lime green, plastic shoe, running on a very cool 18V system AND powered by real worms. $129 with a 4ah battery BAM!!!

@JRomanosky21

5 жыл бұрын

illmagnetic where do you get news of new ryobi tools?