I tested it as well on my channel, I did not have that same issue. I let it cure less than you did but it seemed like it performed better. Nothing ground breaking, not the best in the world, but decently enough.

@autodetailingpodcast

3 ай бұрын

I saw it and thought it was a good video. It gave me hope for it. That’s why I ended up testing it twice. First time I got same results as second but couldn’t believe it. The only thing I can think is you did a small square and the panel seemed vertical. But as I’m seeing with other products (Cerakote, this, etc) they seem to be very inconsistent. So that’s ultimately what my conclusion has been. That the results vary because the product is very inconsistent between batches etc.

@BelLavoroAutoSpa

3 ай бұрын

@@autodetailingpodcast good possibility on those points. Either way I wasn't taken back by it and good to know waiting til 7 days didnt make much difference.

@autodetailingpodcast

3 ай бұрын

For sure man! It’s kinda a pain to wait the 7 days, especially when you do it twice. Haha

@Dee--Jay

3 ай бұрын

Your panel be soaking wet when you apply products which is going to heavily dilute the products which gonna make the products appear better than what it is

@BelLavoroAutoSpa

3 ай бұрын

@@Dee--Jay the hydrophobic spots on the panel have some beads sure but not enough to affect the strength of the chemicals sprayed on there in such volume.

I attended 10 or more Meguiar's training classes and began using Meguiar's products since 1998. All my products I use were Meguiar's only until a year a go. I tried Turtle Wax products and the first was the Slick and slide. I purchased 1 container to see how it worked! I was amazed how well it looked. My wife has a 2021 Jeep Grand Cherokee Trailhawk that spends most of the time in a Climate Controlled garage. I did a complete wash, clayed the vehicle and decided to try the Turtle Was Hybrid Ceramic Wash and dry. I next applied Hybrid Ceramic Spray and buff. Now every week for the last month or so I wash using only the slick and slide. and rinse. This stuff out does any of the Meguiar's products. So all I use on the vehicles I detail are Turtle wax products. Even the Leather spray is great and customers really like the scent! John

@autodetailingpodcast

3 ай бұрын

They definitely have gotten a lot better of the past 5 years or so. I hope they keep it up! Pure wash is def one of my favorites.

Reminds me of the "Ceramic" protection the dealer put on my previous truck. Water stopped beading and sheeting after two washes. When I bought my most recent truck, I told them (dealer) to stuff their coating as I will be taking care of it myself. TW has been knocking it out of the park lately. Currently have a coat of their ceramic+graphene paste wax on it to hold the truck over until spring when I'll do a full proper ceramic or graphene coating. Their "Pure" soap you used here is my favorite, and is awesome in the foam cannon.

I am a Turtle Wax guy. Especially Seal n Shine and the Ceramic wash and wax. 🇨🇦👍👍

Thanks jimbo... well you saved me 25 bucks

Hard to believe they would even release that 😮

@autodetailingpodcast

3 ай бұрын

I had high hopes for it based on all the marketing and talking with them, but….

Been waiting on you to test it lol. I got some last week. Put it on the front of my camper but haven't put it on my vehicles yet.

I think they understand the ritual of car washing and that most diy car enthusiasts are going to reapply this every time they wash. It’s just part of the ritual…we all do it. I mean nobody just washes their car, dries it off and pulls it into the garage. So can multiple coats be applied or stacked? Does that increase durability? I like Meguiars but Turtle Wax seems to have taken the lead over the last few years. They’re putting out some really high quality, high performance products at low cost and that’s making them very competitive.

@ohboy2592

3 ай бұрын

I would have to disagree. I’d most people aren’t doing this. Why would you reapply a protectant every week? All that does is waste money and time. I’m willing to bet that this product doesn’t layer on itself either.

@OtissSpunkmeyer

7 күн бұрын

@@ohboy2592I absolutely agree with him. Listen man I’m ridiculous when it comes to my car. You can catch me in washing or rinsing off my car at least 3 times a week bare minimum. And he’s right. I apply after every single wash. Regardless of what product I’m using. Sometimes I switch it up. But after every single wash I apply something. It’s pointless to me to just wash the car and that’s it. Makes no sense to me. Everyone’s diff tho.

Love the content and videos all around. Keep it up.

@autodetailingpodcast

3 ай бұрын

Thanks, will do!

Missed these torture tests Jimbo. ❤

@autodetailingpodcast

3 ай бұрын

I’m back!!

Absolutely excellent video.

@autodetailingpodcast

10 күн бұрын

thanks!

That's interesting that you mention the McGuire spray wax stuff because I had the blue stuff you mentioned and I followed their directions on completely and it always leaves a smeary, streaky residue on the car but their green bottle quick detailer ceramic stuff works well, goes on great, and lasts a couple washes living in the Arizona sun.

@autodetailingpodcast

29 күн бұрын

I much prefer the green bottle stuff too.

Jimbo: Is it ok to apply Turtle Wax ceramic spray after applying McGuire's Ultimate Wax paste? If so, how long do I need to wait after the waxing to apply the ceramic? Good video.

Jimbo, sticking with the Turtle Wax wash theme for a moment... If, in fact, the soft Slick&Slide is degrading the coating, I'd hate to see what the TW MAX-POWER would do at a mild-strong dilution ratio. Never mind whatever shampoo you used in your first test, especially in light of a weeks cure time not exposed to the elements. It's apparently perplexing and disappointing for a Meguiar's product.

@autodetailingpodcast

3 ай бұрын

Agree

Had high hopes for this... guess I'm going to try and stock up on the old hybrid paint coating. That stuff was great.

@autodetailingpodcast

3 ай бұрын

I did too

I prefer the hybrid ceramic coating over the quick detailer. In my hands the quick detailer died of at the 3rd wash with BH Autofoam and touchless 13 and 12 ph respectively at 3% PIR

I just wanna know what soap you used that stripped it so I can have a good annual reset wash. Thanks!

Thx for the video. Are you going to test their new ceramic coating, 888 or whatever its called? Cheers

@autodetailingpodcast

3 ай бұрын

Of course!

@rooboy99

3 ай бұрын

​@@autodetailingpodcastcool and the gang

Try Nanoglans Hydrophobic coating spray. It's insane good.

I appreciate the video and the product should last longer than seal n shine for $25.00. Meguiars makes good products but they seem stale.

Waiting for this product to launch in our region so we can see how well it holds to feynlab pure wash

@rogueelement9986

3 ай бұрын

Fantastic product there

You should towel dry it after blowing into order to remove any surfactants left behind after the rinse. It could be that that is masking the beading, rather than killing it.

Hello, can you do test for soft99 products, fusso coat and waterblock also the glaco

@autodetailingpodcast

3 ай бұрын

Here’s a fusso coat video from 4 years ago I did - kzread.info/dash/bejne/Y6yV1Neth7uumsY.htmlsi=oTMXJfrDdsetSmYU

Jimbos hard as shell is the best stuff I have used it's an awesome product

@autodetailingpodcast

Ай бұрын

Love to hear it!

Where can I get that soap that took the sealant off in 2 seconds need the link bro

Jimbo, do you have a video on that soap and why it's one of your favs?

@autodetailingpodcast

3 ай бұрын

I don’t think I do. But I should make one. It just seems to clean really well w/o stripping protection. Foams and rinses nicely too.

@gabevillarreal4779

3 ай бұрын

Smells great too and the bottle lasted me over a year with 52 washes a year!​@@autodetailingpodcast

I'm surprised you didn't use the 3D BDX or the GLW Iron Remover

Which has been the best performing Spray on product you’ve tested so far? Turtle Wax Seal n Shine?

@autodetailingpodcast

3 ай бұрын

Yes, seal n shine and the last coat v2 have been the top winners.

hmm, looks like the meg's hybrid ceramix spray is better. maybe you can do a battle between them next time..

@autodetailingpodcast

3 ай бұрын

Good idea!

@mvevitsis

25 күн бұрын

​@@autodetailingpodcastplease do a comparison between the blue hybrid ceramic and this since they are the most similar

Mig non acidic wheel cleaner is super good!

I bought some from Amazon to put on my motorcycles. I wash the bikes, then reapply to get water spots and things. It does ok, I like Ceracoat and Griots 3 in 1 better.

@autodetailingpodcast

5 күн бұрын

You should try this - amzn.to/4dNp6MA

Maybe they should have made this product in place of their paint glosser spray. I would try this just for the looks and not care if it lasts that long. It looks like its a pretty look, especially on black cars. 🤷‍♂️

@autodetailingpodcast

3 ай бұрын

That would have been better I think

I’d like to see it on top of the Hybrid Coating and maintain it with a waterspot remover to see how it holds up, does look weak on its own

@autodetailingpodcast

3 ай бұрын

I’m sure it would do better with protection under it.

I’m a little saddened seeing that. That’s why I switched to the turtle wax still great bang for the buck Thanks for the review!

@autodetailingpodcast

3 ай бұрын

It made me sad too.

Great 👍video buddy tfs

@autodetailingpodcast

3 ай бұрын

Thanks 👍

Jimbo, have you heard of a product called shiny car stuff? Seems like it could be a good product for older vehicles that aren’t worth repainting or clients that are just trying to flip a vehicle and don’t want to spend hundreds on paint correction and ceramic coating.

@autodetailingpodcast

3 ай бұрын

Is it similar to x-kote?

@jonlanden1632

3 ай бұрын

@@autodetailingpodcast I think so. Maybe it would be better to try Optimum CCR? Either way I would love to see you test and torture these types of products. There is a time and place for products like this and with the number of older vehicles on the road and folks feeling the pinch it just might be the best option for some people.

@autodetailingpodcast

3 ай бұрын

There’s def a place for it. I do wonder about the durability but it looks like there’s a bit of a learning curve to using it too

Which turtle wax tire cleaner is good?

@autodetailingpodcast

3 ай бұрын

Hyper foam wheel and tire - amzn.to/3vSKmPz

I want to see someone test the meguirs m888. Just bought a new truck, and I'm curious to see how it performs.

@autodetailingpodcast

3 ай бұрын

I just got it in, doing a few more test on products then I will apply and test it. I should have a video out in a few weeks on it.

@SKEETERBURNS

3 ай бұрын

@@autodetailingpodcast awesome!! I'll be watching for it. Love your videos!

I have a question about your floors... can you use that instead of digging a drain in your garage?

@autodetailingpodcast

3 ай бұрын

Depends on your slope. I’m not a contractor so not really sure.

Thanks for the video , i had this in my Amazon cart ! Decided not to purchase after watching your video

So I still like the Turtle Wax Hybrid Ceramic and Sunday's Best sprays. What are you using for your business that works well and lasts 6 months or better??

@autodetailingpodcast

3 ай бұрын

Those are both still good. Sunday's Best was a client. The Jimbo's Hard As Shell is similar just beefed up even more. www.AutoDetailingPodcast.com/Jimbo - were launching it in a few weeks.

@krflyguy2117

3 ай бұрын

Cant wait for your product. I am sure it will be great. Reserve me a bottle or two...@@autodetailingpodcast

Are they discontinuing their hybrid paint coating? That has done the best resisting wayer spots on my car. Dissapointed this new ultimate ceramic coating is not as good.

@autodetailingpodcast

3 ай бұрын

Im not really sure, but I dont think its selling good, so if thats true it will be on its way out.

Collinite 476s double coated wax will beat it alday 😅😅😅

What would you recommend for ceramic coating or a ceramic coating spray thanks?

@autodetailingpodcast

2 ай бұрын

just depends on your needs/wants. A Spray is going to be much easier, but less durable. But if you maintain your car often and want an easy to use solution a spray is going to be great. If you want long term durability and have some time a wipe on is going to fit you best. Either way you can always do long term maintenance w/ a spray.

@rongamble9884

2 ай бұрын

@@autodetailingpodcast well I think I'd like to do a wipe on because I'm trying to make my clients car less involved for him

Where can I get a roll of those microfiber towels?

@autodetailingpodcast

3 ай бұрын

amazon - amzn.to/3ujwJZj

@MrsSunshine75

3 ай бұрын

@@autodetailingpodcast Thank You!!!😊

So what is the best paint protector

@autodetailingpodcast

2 ай бұрын

JimbosDetailing.com

What nozzle are you using on that hose?

@billiebobbienorton2556

3 ай бұрын

Penile. Circumcised.

Sorry did you say it needs 7 days to cure ? For those without interior spaces I’m not so sure this product for me would even be considered- I personally use Autofinesse graphene paste wax and top it off with Turtle was Graphene detailer spray and I get phenomenal results .

@autodetailingpodcast

3 ай бұрын

I don’t think it needs to be untouched for 7 days, but it’s not clear

@markdance574

3 ай бұрын

@@autodetailingpodcast personally Iv moved on from Ceramic to Graphene products . Personally I find Graphene to be a longer lasting product .

Good video Jimbo, i tried the blue bottle ceramic spay and two applications and at first you think it is amazing but once washed it's bloody rubbish and a waste of money so because of that i tend to avoid anything they make anymore .

@autodetailingpodcast

3 ай бұрын

Yup - I found that out when I tested it years ago. People hated on my test then too.

I’ve tried this stuff and I keep going back to turtle wax hybrid ceramic spray. With 2 coats it easily lasts 6 months!! This meguiars crap is lucky to last 1 month. I keep trying it tho bc it’s on clearance at my Walmart. And I’m a sucker. I’m done tho.. TW for the win.

@autodetailingpodcast

2 ай бұрын

Agreed, this one is a miss for Meg's. Have you tried my stuff? JimbosDetailing.com - you maybe surprised at how good it is.

What’s with the one side of the panel x’d out?

@autodetailingpodcast

3 ай бұрын

I was trying to apply something and I messed up the panel in that section

This video saved me from running out and throwing away $ 27 on junk...

@autodetailingpodcast

12 күн бұрын

Thanks for watching.

I have never seen soap “degrade” anything like that. Not even on wax. Either way, a bit disappointing since Meguiars claims it’s a “true coating” and that does not behave like one.

@autodetailingpodcast

3 ай бұрын

I know..I was a little bummed tbh

But it's it any (noticably) better than the Hybrid Ceramic spray wax...?

@autodetailingpodcast

Ай бұрын

Not IMO

@mwharris

Ай бұрын

@@autodetailingpodcast thanks.... Havagood1

Ill stick to the m27 and cut it any way you like. Turtle Wax Seal n Shine is still the GOAT.

Very odd, watched another torture test of this product and the filling capabilities and durability seemed much better.

@autodetailingpodcast

3 ай бұрын

I saw it too, and it gave me hopes for this product, but I tried it two separate times both with seven days of full cure and got the same results both times. The other video he did use a vertical panel and it was only one tiny square I don’t know if that had anything to do with it, but for me, my results have been consistent

@asaholey

3 ай бұрын

Maybe paid?

@autodetailingpodcast

3 ай бұрын

Nah - I don’t think he was paid. I think they and others (Cerakote etc) that are claiming “curing issues” are actually having a consistency issue. Batch to batch is different, product is curing in the bottle, or not curing, temperamental with different paint finishes etc.

I only wash my cars with a cheap Turtle wax or Mothers wash and wax. I live in Florida and it rains all the time,year round. Now,I lived in Calif. most of my life. The rainwater there was much worse. And,the tap water from my hose was also. So the water spots were considerably worse. It doesn't matter what wax you use, I tried alot of different waxes,you're going to get water spots. So I don't care about how long the wax will last after washing the car with soap. My cars aren't going to go longer than a month with out being waxed again. I do care about how easy the water spots will be removed. In my real world testing,Griot's 3 in 1 ceramic seems to leave the thickest coating and beads the most. It's not the shiniest,or slickest, but it last longer. Turtle Wax Hybrid Solutions Ceramic spray beats the Griot's 3 in 1 for that. Turtle Wax Graphene MAX is slightly better than the Griot's but it cost a lot more. And for total longevity,ScottHD proved the Griot's beat almost every wax he tested,which was over 35 of them. Griot's 3 in 1 went up to a year! And it was the cheapest. For the ultimate shine and slickness,the Turtle Wax Max graphene beats every one. The spray wax that matches the gloss,but not as slick,is the Meguiars Gold Carnuba spray wax. it's cheap,but doesn't last at all. It makes a great detail topper. Extreme Solutions Topper last about as long,is slightly more, unless you buy the gallon size (which I do),and is the most slick of all the finishes I've tried. In Florida, I've never seen pollen in the spring like this in my whole life. It's unbelievable! Your car will be completely covered in yellow dust in less than a week.And pollen is sticky. Topper can't be beat for slickness. So in the real world,who doesn't wax their car after four months? People who don't care about their car,that's who! So does it matter which wax last the longest? I use a mixture of Topper (65%) and Turtle Wax Hybrid Solutions ceramic spray wax 35%,on a weakly basis. Every couple of weeks I do the windows as well. I don't have to wash my cars that often,maybe every 6 weeks,unless it's spring and the pollen is everywhere. My cars look like they're ready for a show,or up for sale,most of the time.

Being a spray..is it really a ceramic coating..and is it 9H

@autodetailingpodcast

3 ай бұрын

No

I just ran a test between P&S Beadmaker, Tec choice, 3D bead it up, Griots 3in1 and Meguires Blue. The WINNER Was 😎 Meguires Blue and was applied wet😲

@autodetailingpodcast

3 ай бұрын

I would have guessed griots would have one out of all of those.

Thanks for the great video. I'm a little disappointed with this #Meguiars product as well. You definitely need a topper for sure. Thanks.

@autodetailingpodcast

3 ай бұрын

I totally agree!

I think you tested the wrong product. They just came out with their actual paint coating M888 aka Meguiar’s Beyond Ceramic Paint Coating. It claims multi year durability.

@autodetailingpodcast

3 ай бұрын

Nope. This was the right product. But I also picked up M888 and will do a review on that as well.

@alonzobarnes302

3 ай бұрын

@@autodetailingpodcast Fantastic. Just threw me off when you said it was their most durable product.

@autodetailingpodcast

3 ай бұрын

they said that, not me! @@alonzobarnes302

I think ill just stick to TEC582.

So are companies getting away from graphene?

@autodetailingpodcast

3 ай бұрын

Most likely until someone can figure out how to market it correctly.

I'm glad I didn't buy a bottle to try out.

MIT pad after claybar

Everybody who is using standard soap-in-bucket washing method does need to use a drying aid for lubrication. That being said, $25 is steep for that purpose. I rinseless wash my vrhicles, so no drying aid really needed so the longevity of a sealer is important. The reality is that there are much better performing products in this category for less money. Turtle Wax Hybrid Ceramic, DIY Detail Ceramic Gloss, and Griots 3 in 1 Ceramic are all vastly superior priducts for longevity for less. I have even seen a spray and rinse product like McKees 37 Hydro Graphene or DIY Quick Beads show likely the same durability or better. I hate ti call it embarassing but Cerakote kind of had the lock in that sentiment right now. LOL

@autodetailingpodcast

3 ай бұрын

Cerakote has the lock on products that underperform?

@johnfreeman440

3 ай бұрын

@@autodetailingpodcast I would say their Professional Ceramic Coating does, for now. Ive used their headlight restoration kit with success but that new ceramic coating was a real mess.

@autodetailingpodcast

3 ай бұрын

it sure was. The funny part is I got scolded for calling it out first.@@johnfreeman440

@johnfreeman440

3 ай бұрын

@@autodetailingpodcast Nobody can question your integrity - that's why I love your channel. I really just got icky feelings when a very popular detailing KZreadr produced a video to essentially gaslight those mentioning problems with the product and then a "roundtable" that most of the members were not on board with the company message. It's been a real mess, but you retain our respect because you weren't scared to tell the truth early on.

I thought Markus left and went elsewhere.

@autodetailingpodcast

3 ай бұрын

He came back.

This is embarrassing performance for something calling itself a ceramic coating. Meg's Hybrid Ceramic wax performs much better. I used to be a Meguiar's devotee because it was and still is the most premium brand on store shelves. How naive I was.

I want the XXX treated side.

@autodetailingpodcast

3 ай бұрын

Coming soon.

Turtle wax outbeat Meguiar's since the bigining of the Ice spray wax lol not impress by Meg's products anymore

Best stripping is done driving in the rain with grit, salt,dirt & pebbles smashing into the car at 70mph from the truck or car in front of you...just a wash & wax soap once a week

@autodetailingpodcast

2 ай бұрын

just be aware of wash & wax soaps, they can be hydrophilic and mask the properties of the coating.

I dont put all my faith in on torture tests. Theyre unrealistic to a degree, however they are absolutely data driven and they at least give you some idea of what, if any, chemical resistance and durability a product has. My faith in megs is definitely at an all time low.i was actually excited to see how this product would do. Theres no reason at this point not to have a product that can last six months when we are calling it a coating. Turtle wax doesnt have issues doing it and they do it cheaper. Griots does it. Ethos does it. Adams does it. And the list goes on and on. Megs ceramic line up is just not there for me compared to the rest of the industry, well some of it at least. 10-15 yrs ago they were all i used. I guess they think consumers are not evolving like the rest of the industry. They better start evolving...flashy bottles and marketing buzz words dont work like they used to. And i agree with you, its probably not a bad product. Its just not a good one when compared to other available products out there. I guess there are still a lot of people that dont know better so as long as they keep buying, megs will keep making the same under performing products year after year. Sorry for the rant...Keep it up jimbo! Keep it real...

@autodetailingpodcast

3 ай бұрын

100% agree with you. I don’t put all my faith in torture test either. But it gives us a baseline for products at least.

@robm7076

3 ай бұрын

The TW hybrid ceramic left watch spots on 3 cars ..that etched into the paint..if it was so durable I feel the spots should not have etched through. That TW did great on all the torture tests but let simple water through.

Even the bead booster has a better resistance what you threw at the panel lol, this isnt worthy of the name ceramic coating. Only thing i use from meguairs is the non acid wheel&tyre cleaner. That is in a league of its own in removing dirt and brake dust from your rims.

@autodetailingpodcast

3 ай бұрын

im still a big fan of a lot of their products, but this one needs a little work.

I have tried the MOTHERS Brand and is wayyyyyy better than Meguiars.

@autodetailingpodcast

3 ай бұрын

I wish mothers would make a comeback.

Armour Detail Amplify is much better than that, and its just a detail spray. Amplify is cheaper and you get twice as much product! 🤷‍♂️

@autodetailingpodcast

3 ай бұрын

I’ve been hearing really good things about Armour.

Damn, are you sure that's not a Cerakote product?

@autodetailingpodcast

3 ай бұрын

LOL - it did seem similar honestly.

I understand there stopped making there hybrid paint coating and this replacing it. There paint coating is much more durable than this. I don’t know what Meguiars doing they are expensive these days saw review of there new version ceramic wash and wax today to that was terrible to much worse than there first version what is Meguiars doing

@autodetailingpodcast

3 ай бұрын

Ya it’s a little interesting to see what they’ve been doing over the past couple years.

@robm7076

3 ай бұрын

No!!! Please tell me they are not replacing the hybrid paint coating with this 😢

@gavinbetts4404

3 ай бұрын

@@robm7076 what I read I hope not to my advice stock up

I will never exchange polymer sealant covered with nuba for this ceramic crap. Everything that has sio2 fills your paintwork with water spots, some of which are irreversible.

@autodetailingpodcast

3 ай бұрын

You have a great point here. Something like a synthetic x press spray wax is very good.

@robm7076

3 ай бұрын

Yes ..Their hydrid paint coating has been the best I've used resisting water spots. Even 4 coats of griots somehow water etched through. What polymer do you use??

@daniell5751

3 ай бұрын

@@robm7076 Vonixx V80 and Vonixx Native Carnaúba Spray.

@daniell5751

3 ай бұрын

@@robm7076 Vonixx V80 and Vonixx Native Carnaúba Spray

Definitely not worth what they want for it. I wouldn't waste my money on it with much better and more reasonably priced products available.

It’s ALMOST like they never ONCE tested it before bottling it and shipping it out. Which is probably what happened.

@autodetailingpodcast

3 ай бұрын

Seems that way but they say it was tested a lot so who knows

First I put you on it tfs buddy

Another excellent demonstration of a poor performing product, I wonder will man the advertiser come to Meguiars rescue like he tried to do with cerakote 😂

@autodetailingpodcast

3 ай бұрын

Time will tell I guess.

This is EXTREMELY dissappointing. I believe the ultimate paste wax ir liquid wax could be more durable. What is it with meguiars and lame ceramic products? I guess 3M isn't interested in competing with top brands. Sad.

@autodetailingpodcast

3 ай бұрын

It’s very sad to watch. Reminds me of blockbuster, Mervyns, etc…just coming to our industry now.

@joeschmoe6908

3 ай бұрын

@@autodetailingpodcast It's strange to me, because you know 3M has the resources to make industry leading products, and the Meguiars name still means quality to most people.

@autodetailingpodcast

3 ай бұрын

I totally agree, but big corporations have a lot of rules, bosses, and people that can mess things up. @@joeschmoe6908

That didn't last any long than that JTC, $30 coating 🙄

@autodetailingpodcast

3 ай бұрын

Haha!

I used several different ones they're all the same to me. They all work the same way they're probably even the same formulas. It's all a scam

Meh. I’ll stick to my turtle wax and griots

No product is legit when it’s married up to one of the most awful trigger sprayers in the business. Why would a manufacturer develop a product they are excited about and then put a terrible and cheap sprayer on it?!

@autodetailingpodcast

3 ай бұрын

I do really hate these sprayers. That’s for damn sure.

@stetsonscott8209

3 ай бұрын

There is a specific kind of dawn dish soap with the finest vottle sprayer I have ever encountered. Maybe it only works with that particular product viscosity, but damn is it an interesting and even mist.

For 25 bucks and only get a small amount, its a terrible product

@autodetailingpodcast

3 ай бұрын

It’s pretty high priced.

all these don't impress me at all anymore once I switched to gyeon I have never looked back

@autodetailingpodcast

3 ай бұрын

What’s your favorite by gyeon?

@gregconrad2117

3 ай бұрын

can coat follow by cure then the ceramic detailer for the weekly wash

I know u didint wanted to say it out loud, but lets be real, its a s... product 😂 And when I watched carefull enough I noticed that u would have killed it faster even with just the soap, but did less wipes on that right bottom side, thats why left was dead after 3 times and right holded up longer 😅

@autodetailingpodcast

3 ай бұрын

Yup! Glad you pointed that out. Sometimes it’s hard to tell why in the moment, while filming and doing an explanation

I like a clean car but honestly I’ve got better things to spend my time and money on rather than worrying about a shiny paint job trying to impress people. I’m fact I used to love getting out of my 911 in a pair of scruffy jeans and T shirt. 😂 I can see the point for a show / concourse car but really an everyday driver that’s going to get stone chips etc etc I’d rather not bother. Each to their own id say .

@autodetailingpodcast

3 ай бұрын

Better things to do like watch other people clean their cars on KZread??? 😜 just messin with ya. Enjoy that 911. Sounds fun!

@newagetemplar6100

3 ай бұрын

@@autodetailingpodcast 😂😂lol I’ve said for the last 30 years I can’t wait till I can just spend a Sunday morning washing my car with nothing else to do ……. Has it happened? ??? Nopes 😳😳😳 Is it me that’s just weird ??! because I can spend weeks being pedantic and making something and being quiet anal even prepping a car for paint etc yet I loose the will to live washing a car 😵‍💫. Sold the 911 3 years ago, ,,,,yellow 964 3.6 turbo 😃

Wierd it did well in martins video.

@autodetailingpodcast

3 ай бұрын

Small square on a vertical panel. Also I’m finding out these products will perform different on different types of paint. Which is making for massive problems for the brands.

Not impressed😐

After watching the whole video. It's not a proper ceramic coating..

@autodetailingpodcast

3 ай бұрын

💯

2-3 months?? lol maybe 2-3 weeks. That stuff is trash lol

@autodetailingpodcast

3 ай бұрын

Ehh I was trying to be nice

All credibility lost when I saw the Tesla . Instant surrender of your man card .

@autodetailingpodcast

Ай бұрын

Who said it was mine?

Really hate to see these products. To me they’re a waste of time and money if you’re serious about your car. I understand these type fill a segment of the population though.

@daniell5751

3 ай бұрын

I will never exchange polymer sealant covered with nuba for this ceramic crap. Everything that has sio2 fills your paintwork with water spots, some of which are irreversible.

@autodetailingpodcast

3 ай бұрын

I think that’s why it’s in their ultimate line and not the hybrid line. but who knows.

@BetterThanNewDetailing

3 ай бұрын

@@daniell5751 not even remotely correct. Ceramic infused with graphene most definitely lessons the water spotting. I’ve had Ethos Graphene V2.0 on my personal cars for the last 10 months. They stay outside and there’s not one bit of water spot damage on them. If they do get spotted from the rain the spots easily come off when I wash them. Both cars still bead up water the same as the day I applied it….the “ceramic crap” as you call it will last far far longer than any Nuba product made. Bottom line is if you’re cleaning your car the way it should be done you’ll never have a water spot problem.

disappointing... a lot of trash products out there. can you do meguiars ultimate paste wax

@autodetailingpodcast

3 ай бұрын

Not sure that product would even be worth a video. There are tons that are easier to use and product a much better result.

@mujjuman

3 ай бұрын

@@autodetailingpodcast Thank you! I appreciate your advice

I’m not a fan of your test methods personally. I wouldn’t be using a soap that claims to be ph neutral and infused with polymers. It’s not really just a straight shampoo. But like you said, it is infotainment. However I’m disappointed with Meguiar’s marketing of this product, claiming it is a coating. This is a spray sealant. The description and instructions don’t suggest otherwise.

@autodetailingpodcast

3 ай бұрын

Fair enough. I did try with a regular pH neutral soap and it actually performed worse than with pure wash. I went with pure wash because I use it often so I’m aware of how it works so I thought it would be a safe bet here.

@Rob-gn6uz

3 ай бұрын

@@autodetailingpodcast one more thing though Jimbo since I have your attention. Some food for thought based off my personal experiences. I’m a diehard Meguiars’s Hybrid Paint Coating fan. I’m trying to figure out why they would market this new product as a coating also. The products are not even remotely similar.

@autodetailingpodcast

3 ай бұрын

Because marketing. That’s the only reason I can think of.

@Rob-gn6uz

3 ай бұрын

@@autodetailingpodcast yup. When and if you get a chance, put Meguiar’s Hybrid Paint Coating through a torture test. I have personally found it to outperform many prosumer coatings, and there is another KZreadr that tested it against Ceramic Pro and Gloss-It which are both “professional coatings” with some pretty astonishing results. Message me I’ll link you. Before the conception of “ceramic coatings,” my go to combo for years was always Menzerna Powerlock maintained with Aquawax Duragloss between washes. I’ve replaced that with Meguiar’s Hybrid Paint Coating maintained with Griot’s 3 in 1 between washes. I can’t find anything that is more durable at a reasonable price point than this. Full disclosure I live in the Northeast and my vehicles are daily driven. I tried a lot of coatings, most notably CQuartz UK & Optimum Gloss Coat. I swear by Meguiar’s Hybrid Paint Coating especially when it comes to price point and ease of use. Thanks for the replies!

@epap1375

3 ай бұрын

⁠@@autodetailingpodcastJimbo have you reviewed the Megs Hybrid Paint Coating? I love that stuff. Very easy to apply, has insane beading, and good longevity. If they would have dropped a “ceramic” in the name it would be alot more popular 😂

So in short.. it is shit!