"tactical slip joint" is like "lowered off road vehicle"

@JosephOlson-ui2pg

21 күн бұрын

Okay, and taking nothing from that, but non locking folders that have this much going on and give one an ability to carry without breaking the law is something the world can use more of: choices!

@chrisdean8235

21 күн бұрын

Yeah, the thing that freaks me out about the TASknives Invaderling is not the deployment speed, the blade could still deploy quick with the thumb stud, but having a non-locking blade in a tactical knife?? Great opportunity for the blade to fold in on your fingers during an "emergency" situation, terrible design.

@OldBadger1

20 күн бұрын

Plenty of slipjoints have been used historically in tactical circumstances. Not ideal, but very usable, depending on the design and the user.

@chrisdean8235

20 күн бұрын

@@OldBadger1 Fair enough, but trying to figure out why it would be designed that way as a "tactical" knife. Are locking mechanisms banned anywhere? and if so, why not just go to a fixed blade for tactical use, even a fixed blade with a smaller blade would be more useful in a tactical situation.

@OldBadger1

20 күн бұрын

​@@chrisdean8235I live in that kind of place. Locking knives and fixed blades are a big no no out of uniform. You can usually get away with a small multi tool. Adaptability is the key. Alternatives? Languiole, Boker plus xl, Sog stout, Spyderco Uk Pen knife to name a few. Would I rather carry my Spyderco Mil or Esse 3 Mil. Sure. I train some FMA, my trainer is a filed down UKpen. The deployment and use are challenging but can be done. There are a few more "tricks" but I save those for fellow practitioners 😊. By the way I have a CCW 😂.

Thursday is my favorite day of the week, first DBK and than Knifecenter. 👍

@JosephOlson-ui2pg

21 күн бұрын

Exactly what I tell everyone. Oddly enough I was able to score Falkniven NL5 idun in CoS steel from KnifeCenter last week, but it got on my radar from DBK and after decades, I have one from the Northern Lights series, finally!

@tmille10

21 күн бұрын

Don’t forget the Mr. Bixby and the apostle P knife sale 👌

@adriaandoelman2577

19 күн бұрын

@@JosephOlson-ui2pg sweet!

@JosephOlson-ui2pg

19 күн бұрын

@@adriaandoelman2577 thanks! I used up a lotta luck scoring that one!

The supressed laughter at sUrVivAL sPeAr got me lmao

How do you measure the blade length? You don’t - it’s your arresting officer’s job 😂

@BPF80MCar-vi1pg

17 күн бұрын

Yeah if you live in a shit place

Thanks, David & Thomas.

that boker magnum 🔥

It's expensive but damn it if that Evo t isn't a work of art

I know if I buy the Liong Mah, the Magnacut Spydiechef is gonna come out next week...

@Tony42Rivers

21 күн бұрын

Lmao

@JosephOlson-ui2pg

21 күн бұрын

Good one!

@timtim4525

21 күн бұрын

It’s all a game…. They call their game; marketing. Even the knife hobby has become a JOKE! only a handful of real knifes left… the rest are spoiled and feminine…. Everyone I know is sick of the games… being played… on the buyers, etc. I’m telling anyone now… the knife business now sucks… but the best knives are being made at the same time !!! It’s the libtards…the fear factor … can’t even talk bec afraid of reprisals!!! Take that to the bank… that soon will be closed forever!

@paulthelefty

18 күн бұрын

You should make that sacrifice for the rest of us!

the evo reminds me of the strider.

I wish that Kizer would a non coated and full micarta scale version of the small fixed blade. I’ve never had any of my 3v rust

@JosephOlson-ui2pg

21 күн бұрын

I had an email today from Civivi and it had a non coated fixed blade with nickel silver and micarta! Leather sheath.

Thanks! Finally a good grouping of affordable but still beautiful knives with decent specs. Lately, Benchmade seems to think they can charge 450 bucks for lower end materials, lower than some items shown today.

I kinda like how the KUF looks like an integral but actually isn’t. Maybe it’s not quite as strong as an integral, but you get all the other benefits while still being able to disassemble it fully for cleaning and maintenance. Tinkering with my knives is definitely of mine, so I gotta be able to take them apart fully lol

Love those Bokers .

This is the first I’m hearing about Maserin knives and I have to say the 502 and 371 are a couple of sexy knives.

@stratobungle

21 күн бұрын

They've been around since 1960 - when I was last in Germany I saw them in all the shops. Yet another knife company based out of Maniago, Italy.

@OldBadger1

20 күн бұрын

Very well made, very well designed knives. I have a couple of older ones in my collection.

@MatisseStLaurent

20 күн бұрын

@@stratobungle thanks for the info! I look forward to adding a couple Maserin’s to my collection. About 3 or 4 years ago I was buying all my knives from the consortium based in Maniago. I jokingly refer to it as my Italian period!

@MatisseStLaurent

20 күн бұрын

@@OldBadger1 thanks for the info. There’s something about the crowned spine on the Italian knives that really appeals to me. I’m looking forward to adding a couple Maserin’s to my collection.

The Jeremy Clarkson meme was great!

the kizer smolt is recommended but its a 3 finger handle....no prob if you put some paracord loop to put your pinky thru

Hi DCA! You are back!

Yes!!! Hardness being stated. Bringing it, Dave!!!

David C. Anderson you could sell wipe in the rain tolit paper!😂😂😂

The first one is very reminiscent of the Spydiechef.

Oh Damn! I SO wanted the TASK one and it sold out too quick! RATS!!!! That one is RIGHT up my alley! Strangely enough the two plain jane Slip joints i ordered in SPY27 and Magnacut back in November finally shipped, BUT this one would have kicked their asses! I regret not watching the weekly episode of New Knives as soon as possible when I miss out on a model dialed in for my tastes!!! Can't help being at work when it airs.

you missed the Jack Wolf release tomorrow!

The Kansept pretatout is $75 with 154CM and nice micarta.

Holy cow, $700 for Nitro-V on the TASKnives? Nothing inherently wrong with Nitro-V, but for that kind of money I expect a premium steel, not a budget steel.

@cainmiranda2702

21 күн бұрын

😂 agreed

@TJB1510

21 күн бұрын

HE DID SAY $700......WOW

@lordquenntillieusiii9250

21 күн бұрын

It's not that uncommon with custom knives more often it will be AEB-L which is an almost identical steel but isn't as common so doesn't really have that budget stigma

@jayr526

21 күн бұрын

I immediately checked to see if my hearing aid batteries were dead. ​@@TJB1510

@W4RM4T

21 күн бұрын

These are also custom knives

Is it a coincidence that I always get paid on Thursday too??

@JosephOlson-ui2pg

21 күн бұрын

Terribly convenient! You're a lucky one

Great to see you Thomas.........................lol. You as well David!

Any idea of when the Cold Steel FM1 is coming out? Can’t find it anywhere

Someone in the staff is acting cute by lining up the Escort next to the GTR.

@JosephOlson-ui2pg

21 күн бұрын

??? I don't get this

Dude the at background music just sets the mood haha

The SENTINEL & The ALERT badass. I've seen some reviews on them and I really want ine.

The Kizer Torbe'? Fixed blades definitely have the design language of the Civivi Keplar he designed. Dude's got a swag all his own. 🎨 The Task Tactical slip joint is a work of 🎨 art! 🔥

Why do companies keep insisting on using ambidextrous lock systems but refuse to add left-handed pocket clips?

@paulthelefty

18 күн бұрын

I can’t keep track of how many knives I have not purchased because of this!

I took a look at the Takumitak knives earlier in the week from an email. They don't look badly made, but outside the Takumi model, they all have that "Gas Station Tactical" or "Mall Ninja" vibe to them that doesn't do it for me personally. I also tend to be cautious of D2 fixies that are over pocket-carry sizes since the toughness really comes into play at that point. It might also have to do with the ENORMOUS "USA Design" print and downplayed manufacturing origin that rubs me the wrong way (M-Tech does the exact same thing on all their worthless junk, so it's hard not to make that association).

W Demko Knives!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

All Leeks have slick handles. We need a KnifeCenter exclusive: Kershaw Leek with Magnacut steel and with a handle that is not slick.

Any word on the Microtech Atreus and will you guys be getting any in

Can y'all show the UKPK Magnacut for next week? You've got them in, just want to see a bit of closeup

Think the chupacabra is using a tactile knife co modified version of the snecx lock

23:15 did Johnny Rotten design it? 😅

If they are 'Concept' Kansept should be Khansept and we would get it correct.

The first knife, Liong Mah KUF is a bit of a head shaker. Why put MagnaCut in a "kitchen utility folder", just because its the hot "super steel" at the moment?. Also, I believe any folding knife is a very poor choice for kitchen duties when all the food bacteria could just get trapped in the pivot area, better to stick to fixed blades for culinary work.

@mugsofmirth8101

20 күн бұрын

You don't have to use it for kitchen purposes

The bad thing about these prices is when we're rewatching these videos 8 years from now we'll be amazed at how inexpensive knives were "back then".

I am kind of surprised that DCA called that Liong Mah knife a "modified sheepsfoot" rather than a "modified lambsfoot" considering his Pocket tango 2 was supposed to be a lambsfoot blade. (Even though the website calls it his favorite blade shape... a reverse tanto) 😅

I just picked up two new knives from you folks, great service and fast delivery. But, I have a question; Why is it that knives don’t come with sharpening instructions including angles? Is there a resource where this info can be found in one location? OK, that’s two questions.

David, is there any appreciable difference between the Snecx Superlock and Andrew Demko's Shark Lock? I have to admit, they look like exactly the same thing. Is it like comparing the Spyderco Compression Lock on the Smock and the Top Liner Lock on Vosteed's RSKAOS? I haven't actually held an RSKAOS yet, but I was lucky enough to be one of the few who got the first run of Vosteed Raccoons with the top liner lock (I notice the knife is marked "Delayed by Manufacturer" now) and in terms of difference between the lock systems, I can't see any difference between my Smock and my Raccoon. I can't help but wonder if it's the same with the Chupacabra and my AD 20.5.

I like the music in the background!👍😎👍

Cowabunga.!

Can you add the prices on screen with the name of the knife

@stephenbarabas6286

20 күн бұрын

@@shane_si2642 no... Because prices are subject to change

@paulthelefty

18 күн бұрын

They won’t because prices change too much.

@shane_si2642

18 күн бұрын

@@paultheleftythey say the price.

How is the super lock different from the shark lock on the AD20.5?

@tutzdesYT

20 күн бұрын

There is a tiny bit of difference in details, but yes, shark lock is a knock-off of snecx's super lock. Snecx just chose not to patent it, so everyone could use it.

Those fixed blades are awesome and 140 bucks for that Boker Magnum is a freaking bargain.

12:54 is that the tip of the blade sticking out of the sheath?

🔪👍

I dont think it would be unfair to say that Reate knife handle is busy. Possibly obnoxiously busy.

Does anyone know why Kizer persists in using D2 for nearly all of their fixed blades? It's not like they don't have plenty of 154cm, 14c28n and now Nitro-V laying around. Edit: yes I realize the Smolt is 3V, but I want a stainless steel on a fixie since I'm more likely to use it and put it away wet and dirty.

Listings online have the rockwell hardness i hope.

@davidgarrett5671

21 күн бұрын

They do if the manufacturer provides it.

DAC- if you click on the link for the Tactile Chupacabra it says "Discontinued" ??

@knifecenter

20 күн бұрын

Unfortunately, they sold through before we had a chance to post this video. --Thomas

I swear all those Kizer came out months ago

What's up with the Houge Knifecenter exclusive. The K320 droppiont. Is the knife recalled or something?? The review says it's not closing all the way. Is it ever coming back in stock??

"liiiiiiittle bit trickier on this one to pull out, because of the, uh, size"

I’m intrigued by the KUF but I’m turned off by the thickness of the blade and the opening hole, neither of which are ideal for kitchen use.

Too many companies asking too much money for outdated lock types and steels these days. To say that differently, alot of value to be had with modern lock types and steels these days.

Anybody know anything about Kershaw 7900CF Launch 7 AUTO Folding Knife 3.75" Stonewashed MagnaCut Clip Point Blade? It's on closeout and looks cool but no reviews.

This guy has got to be the biggest “knife fudd” I’ve ever seen lol. Three things you can always guarantee to hear , “slightly larger than average hands”, “choke up on it”, “widdle around the campfire”

The link for the "Tactile Knife Co. Chupacabra Seasonal Sprout" says it is discontinued and no longer available???

@mcsquirgle

21 күн бұрын

sold out. thats a popular one. gotta be fast

@JosephOlson-ui2pg

21 күн бұрын

​@@mcsquirglethanks for letting us know. I like it when there's help to understand

That knife called power with N6 90 steel you gotta be crazy $170 no way who do they think they are Benchmade lol

I wish the 3v fixed blade was larger. Not much just large enough for a full grip. 3 or 3.1/2 doesn't work at all for me.

BO02MAG2024: Magnum Collection 2024, is there a camp kitchen version available?

The chupacabra has already been proven that black fails and the $300 utility kitchen knife you know you mentioned that the lock is not very secure really $300 wow

Tell yourself, self don’t buy that $300 KUF you’ve been wanting, tell yourself, self don’t, damn I just bought it 😂

We're not in Kansept anymore toto.

Boker The Escort is like an alternative if you like Kershaw Leek, but want more handle and a complexity to the handle with a different blade profile. As so many don't want assisted opening it's got that going for it too. But a slim metal handle knife in the style of Leek

Wait, I've had the smolt and the groom on my cart on amazon for a couple of months now. Those are not new.

@b.rod36

21 күн бұрын

I've had mine for over a month. There are reviews on here almost 3 months old. They must not be high up on the manufacturers vendor list.

@lordquenntillieusiii9250

21 күн бұрын

Dealers don't necessarily get the knives immediately sometimes the company will sell it before the dealers get it

A knife that costs over 200 bucks is called a Gun 😂😂😂

masserin knife, but I HATE billboarding on the blade. put it on the pivot // and CKF went too small, and still charge TOO much for knife made in China, assembled in Russia? there's a guy on Bladebinge that has been trying to sell his brand new CKF for months, and had it as low as $500 - not a single taker.. too much for China knife

Please bring back Heretic Under ripe STABANANA

Looks like im sticking to my benchmade this week 🦋

Knifecenter is gonna have to start offering financing options.

I wish that knife companies would make more lockback knives. I feel that lockback knives are safer to use than other knife locking systems.

Is Leona Mah from Idaho?

@user-pm7pw1tl3t

17 күн бұрын

You are joking right?

GO GET THE CALIPER..?..

That Chupacabra was SO close to being my next knife purchase but they _RUINED_ it by making the bolster so your finger can't get right up on behind the blade. This is what happens when we have "designers" who do things for looks but never think of function because they're only real experience using tools is talking about them on the internet with other people who don't know what they're doing.

As a knife NUT who cooks ALOT I do not get the folding kitchen knife unless camping.....more area for germs and harder to clean, bad combo

@dfgerherbduh3102

21 күн бұрын

Honestly that’s what I was thinking. Not to mention the high price of knives like the spydiechef that just make them a worse option than a normal kitchen knife.

David getting tired of the dummy knives… but living the good and great knives. It’s easy to see …

The Kuf looks nice, too bad it produced from the mind of a bully!

Yoinks 700 for a cnc slip joint and nitroV.. People gonna have a field day with a 700 knife having nitroV with that budget steel stigma... they should have used AEB-L so people won't flip out as bad because it's not used in the budget knife world so most ppl won't instantly associate it with being a budget steel.

A few… of the knives shown here… are over the top … jokes!

Because everybody need to be able to reverse flick their kitchen folder. I do believe we're getting a little out of hand when we need a kitchen folder. Then again that's just me. Probably everybody else wants to spend a fortune on a knife that won't do the work of a $40 kitchen onife

DCA didn´t like those Takumitak Knives at all.... you can tell!

Glad DCA is back. Seth is definitely out of place doing knife videos or even talking while in camera. I love KNIFECENTER… DUMP SETH or shift him to the back anywhere he can fit it.. replace him because DCA is great and Seth is truly something … what!! He can’t do videos… It’s even hard to watch him struggle in ALL of his videos. Or… stay girly… and act nervous… up to you Sir.

@harrycrab8725

20 күн бұрын

You could just not watch the videos with Seth and spare us your personal attacks and unsolicited expert business advice for knife center.

🤨 Boker wants $140 for a 440 stainless steel from China? GTFOH!

Hey DCA, Please stand up, Sing for the moment, I love the way You lie, I need a doctor... I need a doctor....

It's July and KC is just now showing the Rotten Evo T as a new knife? I bought my 2 Rotten Evo 4.0 (barked DLC with DLC S90V blade) on Feb 28th from NC Blade. I also bought the Zircu-ti/Damasteel version 2 weeks after. Tbh, I'm surprised any of the Rotten Evo 4.0s and 4.0Ts are even still available considering they've been out for almost 6 months now. In all honesty, the Evo 4.0 sucks, especially for how much they cost. I know I was highly disappointed with both of mine.

@davidgarrett5671

21 күн бұрын

What are you talking about?

@harrycrab8725

19 күн бұрын

@@davidgarrett5671 I think he’s talking about the fact the Evo has been out for awhile now and that he doesn’t like them, especially for the money. What did you not understand?

You're going to tactical your fingers right off your hand with that thing😢

Whoever designed those two Maserin knives, and the person who decided to move forward with them really need to think about a different profession. I wouldn't pay $50 for either of them.

I think you need to start doing more up close shots of the knives.Because I watch on a small screen on my phone. If it's possible

Tactile is terrible. First of all that’s way too close to the WE/civivi vision. Second, they use all these ambi locks and then don’t put a reversible clip on it. Made in America but act like a European company. That’s why Benchmade dominates all of them in revenue.

@jeremyweisinger8655

14 күн бұрын

Watch the video smart guy. it's a collab with snecx who designed the visions. Listening is key.

STOP WITH THE D2 BLADES!!!!!

I guess Benchmade greed for price gouging the crap out of us has spread to other knife manufactures

Dave, the knife center you gotta stop making excuses for these knife companies seriously you need to quit. They are getting way out of control.

Just say no to Liong Mah.