My new-to-me New Holland L783 skid steer will not start, so I investigate and see if I can get it fired up. Follow along and give your thoughts! LIKE AND SUBSCRIBE!! music:bensound.com
Жүктеу.....
Пікірлер: 13
@j.santosh.l.6386Ай бұрын
Check valve bad. Fuel returns to the tank.
@dieselpackgarage8796
Ай бұрын
That certainly would have the same effect. This happened to be the fuel primer assembly
@christophermckernan3144 Жыл бұрын
you need to be sitting in it with the seat belt fastened as there are safety switches
@dieselpackgarage8796
Жыл бұрын
Those safety switches are bypassed 😂
@christophermckernan3144 Жыл бұрын
don't worry about that stupid primer pump just put a 12 volt inline fuel pump on it and problem solved
@dieselpackgarage8796
Жыл бұрын
That MAY have worked, but would rather keep it original. The fact that it was pulling air in through that likely means I would still have issues with an electric pump 🤷 but it's easy enough to replace
@christophermckernan3144 Жыл бұрын
change out those fuel filter bowls. they are not the right ones. get it running before worrying about drive lever. that is a simple adjustment under the seat. you really need a manual or find someone alot smarter than you to work on it before you totally fuck it up. just calling it as i see it.
@dieselpackgarage8796
Жыл бұрын
Interesting take. Yes the levers are fairly simple to adjust, just need to get around to it at some point. And I did get it running, the primer pump was the issue all along, as I correctly suspected. With those same fuel bowls it runs fine now. Not sure what you think is wrong with them since they appear oem equivalent from a lot of what I saw online 🤷. I am also not sure how my intelligence is factoring in to me tinkering and learning for the first time on equipment I've never worked on before. But you're entitled to your opinion. I'm here to learn and share. A large part of that is getting feedback in the comments. So while I may not be the most versed in this equipment, I am working to improve myself and showing my mistakes along with my successes. So I appreciate your viewpoint but perhaps you should also seek to build rather than demean.
@christophermckernan3144 Жыл бұрын
you need to thoroughly bleed the fuel system as well as the injectors. ford engines are tough but a motherfucker to bleed and get running again. use starter fluid sparingly as these engines don't like it.
@dieselpackgarage8796
Жыл бұрын
Yea could see the starting fluid was not a friend. But got it running 😂
@user-kg6wr6qq3h8 ай бұрын
diesels dont have vacume
@dieselpackgarage8796
8 ай бұрын
Then how does the fuel move from the lower fuel tank up to the engine to run?
Пікірлер: 13
Check valve bad. Fuel returns to the tank.
@dieselpackgarage8796
Ай бұрын
That certainly would have the same effect. This happened to be the fuel primer assembly
you need to be sitting in it with the seat belt fastened as there are safety switches
@dieselpackgarage8796
Жыл бұрын
Those safety switches are bypassed 😂
don't worry about that stupid primer pump just put a 12 volt inline fuel pump on it and problem solved
@dieselpackgarage8796
Жыл бұрын
That MAY have worked, but would rather keep it original. The fact that it was pulling air in through that likely means I would still have issues with an electric pump 🤷 but it's easy enough to replace
change out those fuel filter bowls. they are not the right ones. get it running before worrying about drive lever. that is a simple adjustment under the seat. you really need a manual or find someone alot smarter than you to work on it before you totally fuck it up. just calling it as i see it.
@dieselpackgarage8796
Жыл бұрын
Interesting take. Yes the levers are fairly simple to adjust, just need to get around to it at some point. And I did get it running, the primer pump was the issue all along, as I correctly suspected. With those same fuel bowls it runs fine now. Not sure what you think is wrong with them since they appear oem equivalent from a lot of what I saw online 🤷. I am also not sure how my intelligence is factoring in to me tinkering and learning for the first time on equipment I've never worked on before. But you're entitled to your opinion. I'm here to learn and share. A large part of that is getting feedback in the comments. So while I may not be the most versed in this equipment, I am working to improve myself and showing my mistakes along with my successes. So I appreciate your viewpoint but perhaps you should also seek to build rather than demean.
you need to thoroughly bleed the fuel system as well as the injectors. ford engines are tough but a motherfucker to bleed and get running again. use starter fluid sparingly as these engines don't like it.
@dieselpackgarage8796
Жыл бұрын
Yea could see the starting fluid was not a friend. But got it running 😂
diesels dont have vacume
@dieselpackgarage8796
8 ай бұрын
Then how does the fuel move from the lower fuel tank up to the engine to run?
@marcusdevries3453
3 ай бұрын
Something called a mechanical fuel pump guy