New DeWalt Impact Driver Snaps Losers Streak!
Тәжірибелік нұсқаулар және стиль
Join Jimmy from VCG Construction as he unboxes and tests out DeWALT's new DCF860 XR Impact Driver! In this video, we dive into the latest features of this impressive tool and see if it can replace Jimmy's older DeWALT impact driver, which has been his daily workhorse. From unboxing to real-world testing, Jimmy takes the DCF860 through its paces, comparing it to previous models like the 887, 840, and 850. Watch as he drives screws, tests different speeds, and shares his expert insights on this high-torque, three-speed impact driver. Don't miss out on seeing how this new tool stacks up and whether it can snap Jimmy's losing streak with older models. Plus, stay tuned for a potential tool test roll against other major brands!
Get VCG Construction merch and help out the channel vcg.store
Join this channel to get access to perks:
/ @vcgconstruction
Пікірлер: 81
Trust me… DeGang is gna wanna stay til the very very end of the video.
@GannDolph
22 күн бұрын
nice easter egg 🥚 at the very end, depending on your team colors i guess...
I'm impressed. I'm thinking of grabbing one of those for my toolbox. I have the smaller one and never had a problem with it, but I've seen the performance of this power tool is amazing. Thanks for the video. You and the VCG gang have a nice and blessed day. Take care.
I’ve been a Milwaukee guy for years. Been using an Atomic with the smallest power stack at work for 6 months and this is my favorite impact now. In speed 2 of course.
@jporreca32
23 күн бұрын
Of course… and welcome to DeGang ⚫️🟡
@OAndy2222
23 күн бұрын
Those Milwaukee just don't have the fine control like the dewalts we use self tappers and the new dudes always blow them out with the Milwaukees
@2216sammy
3 күн бұрын
Surprising, Milwaukee was bought out in the late 1990's by the same company that owns Ryobi . Not the same quality tools at all so good to hear .
TTR baby! Old school style. I really miss the old days with the interaction we had during TTR Fridays. Miss the old scoreboard in the back, and Nick yelling and screaming 🤣😂that was great!
The pandemonium during the TTRs when the 887 would start smoking 😂😂😂 good times
Thanks for the review!
@VCGConstruction
23 күн бұрын
No worries!
Test it against the top 3. We gotta see it. DeWalt Gang!
Think you could sneak one in my toolbox as well? 😂 Nice video man, can't wait til I can afford one. 😁
Good job dewalt getting it together to possibly compete with milwaukee.
Thanks 😉.. 😊 looking to buy it when it comes out
Finally !!! Dewalt is officially at the top of the impact driver game ! I want to see it VS all the top brands !
TTR PLEASE Against the Flex button eject impact driver
Dewalt rookie, here. Can it be explained why the model numbers of Dewalt impact drivers have been released like, DCF885, DCF887, DCF840, DCF850, DCF 845, now the DCF860? Not knocking the tools, just the numeric order of models being released. 🤷♂️
@VCGConstruction
23 күн бұрын
Beats me, but don’t forget the long lost dcf895 which was pretty cool looking!
Seeing the older versions of the impact driver smoke and puff up like the city of Seattle once weed was legalized was a sight to behold; I'm surprised it let itself get to that point.
That is a Flyers fan if I’ve ever seen one.
@jporreca32
23 күн бұрын
You know it… was coached by Jimmy and Joe Watson and Ed Hospodar as a little kid. Broad St Bullies!
you are the cam out king!
This gonna be new king ... then another new king'll come along before long. Competition has been very kind to us all!
@pabloslife301
22 күн бұрын
This will definitely be at top till some one beats it
are impact drivers such as this new DCF 860 efficient with 3/4' auger bits?
Im still using an 887 ever since i bought it 8 years ago still going strong though the lights are done
TTR please
Nice video Jimmy I can,t believe not one word out of Vince does he have a sore throat nice job u2 Vince
It’s almost as big as Vince’s guns but I’m still not seeing a DeGANG in medium in the merch store
Definitely wouldn't worry about the LEDs, amp draw would be negligible like they said
I tried 860 last month while visiting Korea. It was just too heavy for me. My go-to will still be 850. But I would like to see 850’s speed selector upgraded like 860!
DeWalt for the win! Let's go DeGang!
You know the deal. Put it up again the Milwaukee or the flex. See how it does.
Looks like a perfect gap filler between by 840 impact driver and my atomic 3/8 drive impact wrench. I may be snapping some 3/8 drive adapters with this bad boy in the future.
If he mainly uses his impact in speed 2 then he should consider using the dewalt 12v impact each day cos I do and it’s perfect
Should re do the test with the pulleys and dumbbells that Flex did to show off the power and speed of their impact driver
I'm still using an older impact driver (dewalt).. this one piques my interest. I may have to look into it.
I live in speed 2 as well. DEGANG!
I don’t understand why you wouldn’t use drywall screws on wood? Isn’t every drywall joint that you would be fastening with a screw - be backed by dimensional lumber? lol by my math, the bulk of a 2” drywall screw is being drilled into wood so what am I missing?
When is this going to be released?
@VCGConstruction
23 күн бұрын
It’s been available for a minute , ordered it Monday last week, got delivered on 4th of July as crazy as that sounds!
Hey, is Nick still with you guys??
I didn’t like the 850 for toe screwing. The bulky head tended to get in the way if you didn’t have at least a 3 inch bit. So far I’ve enjoyed the 845 a lot and it seems to run circles around the 850. Think I’ll stay with the 845 because of the small compact narrow head on it.
@JacobOverman
22 күн бұрын
Another thing to mention is that i enjoy the power from a power stack but I’ve had 4 power stack 5ah. I warrantied two for failing under load on bigger tools. Then I got a new one from warranty. Immediately failed again. I hope they get it worked out.
Yes, put it up against the other brands.
Why do you need a drill attached light to stay on 20 minutes... I dont see a need for more than 5 mins which even then would be a bit excessive prolly
Dewalt is what I have Milwaukee is great to for battery operated tools.
I think every contractor/tradesmen generally lives in speed 2 or 1… maybe if you’re using an impact wrench and are working for nascar then I can imagine you’d need all that speed but I definitely don’t need it unless I have a very strong magnet for my Philips head screws🗿
Dude you started with a dcf885, remember, 😎
What about the dewalt dcf870
Price
Let’s see if it holds up over time vs makita
@2216sammy
3 күн бұрын
Makita is numero uno in the tool world now since Milwaukee was bought out by the Chinese in the late 1990's .
Dewalt and Milwaukee are good stuff, but I'm a makita guy
Go against Milwaukee
@Joe-g8s
23 күн бұрын
I know I think the Dewalt ones gonna win
I also live in speed 2
right now at Harbor Freight For 99 bucks you get a 5hr batt and charger with a free Hercules impact driver with a 5 yr warranty. That is stronger than or as strong as any of the big name brands. People just starting out should go that way you won't be sorry. Heck you can almost get 2 kits and 2 free tools for the price of 1 of the big name brands plain tool
Jimmy what happened to Nick
@mjc8761
23 күн бұрын
Nick hasn’t been around for years now Jimmy is the DEWALT man
@ronaldsimpson263
23 күн бұрын
@@mjc8761 i caught Vince saying just before the flex rollout that Vince had decided to go on in a different direction. Someone in chat had asked about him.
Test it against the latest milwaukee fuel,flex and makita.
strange thing about this impact is its MUCH more powerful in reverse
run that Milwaukee vs dewalt !!!
"Schuper schmooth Schuper easchy "
I don’t understand why dewalt have so many different models drill and impact its giving the consumers hard time to chose which models to purchase
You got the 8 amp POWER PACK NEXT
The real deal Milwaukee tool corp was bought out in the late 1990's unfortunately . Tool quality isn't the same but acceptable . Anybody familiar with Flex ?
Looking swole Vince
@VCGConstruction
11 күн бұрын
Yolked
DCD860, KZreadr version. :D
Vince looks mad😆😆
@VCGConstruction
5 күн бұрын
😡
real nass like.
Dam vince hating 😂
your overdriving in speed 3 because your not used to a dewalt being that fast.lol
⚫🟡⚫🟡
'SWICH'
It's still yellow lol
Dewalt meh