New Carpro D-Quartz Ceramic Coating Review!
Автокөліктер мен көлік құралдары
@CarCraftAutoDetailing 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel & future content please consider buying me a coffee at: ☕️ www.buymeacoffee.com/CCAD
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com/shop/carcrafta...
Products used in video: (items may be updated to what I currently use/recommend)
🇺🇸U.S.A. 🇨🇦Canada 🇪🇺Europe Links:
Carpro DQuartz (GO) Coating: bit.ly/3VdtWeU
Other Recommendations For Consumer Based Coatings:
CQuartz U.K.3.0: amzn.to/3gdnO4k
CQuartz SiC: amzn.to/3m06bbk
Towels For Coating Removal: amzn.to/3EvyO7c
Car Paint Markers: amzn.to/3eB3MQL
Microfibre Coating Gloves: amzn.to/3S6in4k
Great Nitrile Detailing Gloves: ebay.us/Ewr3rz
Detailing Inspection Light: amzn.to/3rHWoW
Detailing Shop/Mobile Lights: amzn.to/3MktbdY
Detailing Shop/Mobile Lights Larger: amzn.to/3Nu2xQA
Car Masking Tape: amzn.to/3STKaGv
IPA Panel Wipe: amzn.to/3Vhi21H
Hose Multi-pattern Sprayer: amzn.to/3TLKkjI
Panel Stand: amzn.to/3eoT1kC
🇦🇺 Australia Links:
Carpro DQuartz (GO) Coating: www.waxit.com.au/products/car...
Other Recommendations For Consumer Based Coatings:
CQuartz U.K.3.0/Paint Ceramic Coating: www.waxit.com.au/products/car...
Evo Paint Ceramic Coating: www.waxit.com.au/products/nv-...
Towels For Coating Removal: www.waxit.com.au/products/aqu...
Car Paint Markers: amzn.to/3Fxa2nw
Great Nitrile Detailing Gloves: www.waxit.com.au/products/gri...
Detailing Inspection Light: www.waxit.com.au/products/tak...
Detailing Shop/Mobile Lights: www.waxit.com.au/products/tak...
Great Hose Multi-pattern Sprayer: amzn.to/3NbaJ85
Car Masking Tape: www.waxit.com.au/products/kab...
IPA Panel Wipe: www.waxit.com.au/products/car...
Panel Stands: ebay.us/4rzOfu
Microfibre Coating Gloves: www.waxit.com.au/products/car...
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
🎧 Music tracks in order of play:
Premiere by ANBR: artlist.io/song/112487/premiere
Over The Rainbow by Ottom: artlist.io/song/12498/over-th...
Dreamy Beats by Stefano Mastronardi: artlist.io/song/5678/dreamy-b...
Little Cute by Stefano Mastronardi: artlist.io/song/15038/little-...
Lo-Fi Lullaby by Stefano Mastronardi: artlist.io/song/15039/lo-fi-l...
Lazy days by Stefano Mastronardi: artlist.io/song/37250/lazy-days
Air by Magiksolo: artlist.io/category/549/lofi-...
Share Your love by Steven Beddall: artlist.io/song/112513/share-...
I Need You by Steven Beddall: artlist.io/song/112509/i-need...
#carpro #cquartz #carcraftautodetailing
Пікірлер: 183
I guess if it can decently reduce scratches with a stiff brush, it might actually protect from love marks from drying
I've been waiting so long for this review! I managed to get hold of some and apply it to my Audi a few weeks back. Absolutely loving it so far.
Thank you for taking the extensive time, intense detail, and thorough testing and discussion to provide honest feedback and expectations. Keep leading the way!
Great video. I like that you highlighted the difference between just installing a coating and knowing there will be differences for installation on each vehicle. I agree also there’s more to coatings than hydrophobics and I’m glad you touched on that. I would love to use the car pro pro-line but I don’t have enough consistent volume to get it yet.
Thank you. The length you go to in your reviews is very much appreciated.
Very informative, thanks. I’ve never really given the CarPro coatings a shot, but after seeing this I’m more interested in the brand. I’ll definitely buy & try the consumer version when they release it. Thx.
Great review Sandro ! It would be interesting to see how Carpro DQuartz holds up against Diamond Protech (NGNT) coatings.
Wow did u crush it with this video your a very skilled videographer. Your spot on with you hydrophobic testing that had to be so hard to film
Many thanks for your quality works.... Everytime!! Love your channel
Great review. Really impresed with the layering options and results. Thanks!
Awesome review, now do a review for D-Quartz Go 🙂
I'll have my class with yourself in the middle of the year, extremely keen on taking the next step in my detailing journey and looking forward to getting hands on with the professional lineup.
@CarCraftAutoDetailing
Жыл бұрын
Awesome mate, I look forward to seeing you there!
I am sure I hardly can imagine how many efforts, planning, schedule, time and material you have spent for this Sandro. I believe my imagination is a half of the reality only. This is absolutely the greatest review I have ever seen and I hope CarPro people will invest to this as an advertisement). Cheers from still cold and still snowy Sweden (hopefullh the last snow of the season today).
@CarCraftAutoDetailing
Жыл бұрын
Thanks my friend and wishing you some sunny weather your way!
Super helpful video! Thank you
Nice work as always Sandro.
Great video. I was trying to decide whether or not to get DQuartz as a base coat for Finest Reserve and this convinced me that it’s well worth the extra cost. Thanks!
@CarCraftAutoDetailing
8 ай бұрын
Thanks and you won’t regrets it, DQ + FR or even Pro is just a fantastic combination.
once again... a really boss review
Thank you for the great video!
Gran bel lavoro, BRAVO!!!!!
Great video as always
Wow super video! Thank you from italy
Great review, and pleasure to watch in 4k!
@CarCraftAutoDetailing
Жыл бұрын
Glad to here that mate, thanks!
Can't wait to watch this when it's not 1am since I have work early
@MatthewM214
Жыл бұрын
Fax
Nice one mate. Looks like this "nanodiamond" tech may produce a darker finish - I'll be very interested in their DIY version and presumably future offerings from other brands for comparison.
Waiting eagerly on your drops buddy cheers!!
@CarCraftAutoDetailing
Жыл бұрын
Hope you enjoyed the video mate!
Thank you Sandro !
@CarCraftAutoDetailing
Жыл бұрын
My pleasure and hope you enjoyed the video.
Great review as always. I just picked up my new model 3 after having it coated with Dquartz and Finest reserve on top. It looks amazing so far, will be interesting to see how it holds up here on the other side of the world :)
@Axalaron
11 ай бұрын
Hi gunnarjuliusson1027, how many layers of each coating has been applied to your model 3 & what durability guarantee has been provied? Not sure whether I shall coat my car wit 2 x Finest Reserve (recommended by my detailer) or the same way as you did, to get a longer durability. Kind regards, Adrian
Great video Amazing thanks
Great video as always Sandro The reviews just keep getting better and better Althought the videos is 28 mins long i am sure there must be 50 or 60 hours worth ot teasting If there is one thing you have taught me Sandro is when it come to detailing there is no one size fits all detaling Sometimes we have to IMPROVISE, ADAPT and OVERCOME WE have to react to what we see infront of us I am glad your back training and shaping future detailers Its just a pity i am so far away or i would sign up for sure Have a good one In SANDRO we TRUST
@CarCraftAutoDetailing
Жыл бұрын
Thanks Bob and if you were closer I’d love to see you in a class mate, but I also think you’ll be more than fine with you own work ethic, skills and standards. Appreciate the kind comments my friend and really glad you enjoyed this review.
Very helpful vid.. 🙌🙌🙌
Really nice review. I'd be interested in seeing a comparison of D.Quartz and Diamond Protech, if you have the time and inclination
Truth be told as a subscriber I’d like to see you do your Concours level details vs these product reviews
I wonder how the consumer version of dquartz+sic will fair. Mr. Sandro thanks a lot for the incredible review and information.
@CarCraftAutoDetailing
Жыл бұрын
My pleasure mate and I think the consumer version would work great under SiC as SiC is almost a consumer version of CQPro
This video was spot on! Great job! So this would answer my question on why the haze was happening because the wipe off was too early. My question for you was on the 4 mins did you already see flashing? I’m worried that if I let it sit for too long it might not buff off. I live in cali with 70-80 degree weather right now. I never had this problem with cqtz
@CarCraftAutoDetailing
Жыл бұрын
Thanks mate, and a good rule of thumb when you’re looking for the optimal wipe-off time is feeling just a little tack or friction start to set in - coating can flash and streak well before the best wipe of time has arrived. Just a tingly bit of fraction when wiping lets you know that as much of the active coating as possible has bonded to the surface and you’re going to get the thickest possible application. If you do end up waiting too long, there’s no huge issue there, just add more coating to your applicator and wipe it in over the section to allow the solvents to reactivate the cured coating and it will remove any stubborn excess coating that’s not lever down evenly, and then just readjust your timing moving forward.
Great video great content. Just a note please sir..... The hardness on the cloths some times is deceiving..... Be carefull Many transfer and bonding agents on some coating formulations dont bond proper on fabric material ( like cloth applicators)vs clear coat and can deceive us on the results.
@georkl8454
Жыл бұрын
Μαθαίνεις και εσύ από τον καλύτερο 😀
been waiting for this review! really glad you took the opportunity to review this diamond-infused coatings especially from Carpro. Been watching several videos lately from Rag Company and several other high profile KZreadrs, and kinda sick at how they are reviewing it "way too positively" it's as if they're getting paid to say only nice things without doing a proper testing like you did on this video. now that you've showed how the application goes, the color darkening effect, the scratch test, and the chemical resistance, I now knew what to expect from these diamond-infused products. again, thank you for your work.
@CarCraftAutoDetailing
Жыл бұрын
It’s really to hear that all that information and the time taken to film it was helpful, thank you!
@jeffc6832
Жыл бұрын
I also appreciate Sandro's efforts to show all of the details that he has here. That said, in regards to The Rag Company: they have worked for a long time to build trust with their customers and do A LOT of testing behind the scenes...but don't necessarily show it on video. If a product isn't good, they don't carry it. They brought on the Diamond Pro Tech (NGNT) coatings after almost 2 years of testing. NGNT also sells their nano diamond tech to other companies, and I believe that is the case with DQuartz. That said, the solvents and other ingredients are different.
@danlc95
8 ай бұрын
Well said, and agreed.
Wish they'd sell these things to private people, that know all about working panelwise, watching humidity and temperature and so on. It's not rocket science.
@Ichabod_Jericho
Жыл бұрын
It’s genuinely not rocket science. They use corporate double speak and say qualified insitallers protect the reputation of their brand. In reality, it’s just marketing strategy to siphon as much money as possible. You don’t have to apply ceramics flawlessly, just gotta get the basics right and understand not every car is gonna sit in a museum or even look nice in 8 months. C’est la vie
@fifthcircle1
Жыл бұрын
Or, you can just get some 🐢 Wax Hybrid spray. Beat the system, save a shit-ton, and stop wasting time on the overinflated B.S.
@AJ56
Жыл бұрын
As a professional installer for SystemX and many other pro coatings I can tell you it’s no different than a consumer grade coating, some have instant flash time that’s it. I’d be fine if they sold it retail maybe without the warranty, most of the gloss you get is anyway from excellent machine work not the coating.
@philippesteindl3356
Жыл бұрын
@@AJ56 True about the gloss. I"m more interested in the big longevity of sheeting and beadpron. It's just fun to watch.
@TheMstwntdLMSV123
Жыл бұрын
They’re working on a consumer-grade version that should come out in a year or so. I hope they don’t water it down too much
Thanks for sharing Sandro! Dquartz seems like a definite winner. Given the time and care needed to install this coating, where do you feel like this stands in comparison to paint protection film?
@CarCraftAutoDetailing
Жыл бұрын
My pleasure mate and it’s going to be significantly cheaper than having a good PPF applied well, probably a quarter of the price in general and - paint correct aside - much quicker to install by far. I think as most PPF jobs tend to be front ends, so DQuartz could be a fantastic way to add great protection to the rest of the vehicle as an add on service that makes it more affordable compared to applying PPF to an entire vehicle.
Nice review,professional approach!
Sandro isn't just a detailer but a "detailing engineer" .
I just installed Diamond ProTech Diamond body and 36 on a few cars. Really like the "nano diamond" effect. Can you provide a comparison between a consumer product like Diamon Body and this?
Dear Sandro, I really appreciate how professionally & clearly you explain everything. Thank you! My white Jeep Grand Cherokee SRT will get a ceramic coating in two weeks. I am undecided wich option to chose: 2 x Finest Reserve or 1 x Dquartz + 1 x Finest Reserve What would you recommend? What I also wonder: Carpro states that Dquartz + Finest combined will last longer (2y + 3y). Does this refer to the entire functionality of the 2 layer coating or that after 3y, for example, the Finest Reserve is no longer functional as a top layer and then the Dquartz layer lasts an additional 2y with its specific functionality.
@CarCraftAutoDetailing
11 ай бұрын
From my own testing I believe DQ+FR will be a more durable option than 2 layers of Finest Reserve. I also believe that the extended warranty relies on 2 layers of DQ topped with 2 layers of FR and that it’s not really broken down into seperate warranties for each of the coatings but more so as a whole.
So in conclusion. I'm going to use the following coating layers in this order: 3x D Quardz 2x CQ Finest 1x CQ Sic And maintain with Ech2o CQ Lite Reload Awesome
Sandro thanks for putting this thorough testing together. Does dquartz have ability to bleed out marring with heat?
@CarCraftAutoDetailing
Жыл бұрын
My pleasure mate but I didn’t test that in particular, if I get time in the future I’ll try to test it out.
Right when i’m on my first coat of EXO!
@CarCraftAutoDetailing
Жыл бұрын
🙂
Blimey, I watched the whole video and can't access any of the product myself, but interesting to know how different products have different pros and cons, and that no product ticks every box, was surprised how damaging nylon bristles can be, I have been known to wash my car (you're all gonna cringe here..) using a nylon bristle broom dipping in the bucket of wash and wax, I almost always do it outside and when it's raining as this saves me from drying off 😱😅
There seems to have been an update. My box says: new version 2024.
You refrenced cquartz UK, and how it shares a characteristic with Dquartz... Nobody would know that, unless they've had a intense amount of experience, and deep knowledge of all aspects of the product. That is an incredible asset to those that have also had experience with the UK, as in it will help someone know what to expect. We thank you so much for this. It makes sense thet you use CarPro products. With that level of interest in something, we will eventually find ourselves at the proverbial "end of the path" in terms of how our product choices are really our way of showing how much we care for our customers.
Second!!! Was wanting to see that!
@CarCraftAutoDetailing
Жыл бұрын
Hope you enjoyed it my friend!
Great video mate, with the dquartz+cqpro is that a single layer of each or two layers of each?
@CarCraftAutoDetailing
Жыл бұрын
Thanks and it was a single layer of each
Fantastic review Sandro (as always). Could you see any problems applying CQuartz Lite to a base coat of DQuartz? Cheers.
@CarCraftAutoDetailing
Жыл бұрын
Thanks and I think that would be something that would need testing but I’d tend to think that as far as CQuartz consumers based coatings go SiC could be the better choice as it’s more closely matched to CQPro.
@michaelloftus3576
Жыл бұрын
Thanks bud.
Great review,I am thinking to apply two coats of DQUATRZ GOand one layer of SIC,what is your opinion? Thanks.
@CarCraftAutoDetailing
Ай бұрын
I think that’s a great option, but I’ve had slightly better performance and durability with UK.3.0 over DQGO in more recent testing so that would be the way I’d tend to go as of now.
what about water spots, have u had any problems with water spotting on any of the coatings? which one managed to prevent water spotting better? also in my experience DQuartz showed some self healing abilities, although i dont know whether can be attributed to mostly the paint of the vehicle. great video by the way!!
@CarCraftAutoDetailing
Жыл бұрын
Thanks but no I didn’t get to doing any water spot testing - so many tests so little time 🙂
Great video and very interesting to see the professional side and the difference in installation factors. Question, does anyone know if CQuartz UK 3.0 has the same effects with long flash times? I have often got a slight white haze when buffing off at around the 4 to 5 minute mark. After watching this i did a quick test on my own vehicle at 2, 4 and 15 minutes, in Auckland today,. 2 minutes was a definate haze, 4 mins ok but still hazy, 15 minutes was much better with no haze and slicker to the touch. Is this to be expected? Or am i missing something. Weekend warrior.
@CarCraftAutoDetailing
Жыл бұрын
Thanks and I think if a longer flash time is rendering better results you should go with that. I don’t think that’s a given as far as timing goes or that waiting longer will always be better as there’s lot of environmental factors like temperature, humidity and even wind or a breeze as well as technique factors like the size of your section, the amount of coating on your applicator and how long you work it in that will all influence that result. So the best thing you can do is just adapt to all of that in the moment and let the results guide you.
@rayruthven6239
Жыл бұрын
Sandro, thanks for the reply, together with the video i have more confidence to explore parameters that will result in the best result for my situation. Keep up the excellent videos.
you forgot to use a flame thrower against your coatings to show flame resistance
@CarCraftAutoDetailing
Жыл бұрын
I knew I forget something … 🙂
What maybe the best combination for Dquartz?
Great video… can we see how this will fair with SIC on top
@CarCraftAutoDetailing
Жыл бұрын
Thanks, and I suspect SiC is close to a consumer based version of CQPro, so I would expect the two to mesh well together - but I’m sure I’ll get time to make a video on that.
Hey Sandro will you be reviewing NV Boost V2 at all? Thanks
@CarCraftAutoDetailing
Жыл бұрын
It’s on my list - but just been finding it hard to find the time!
Great video Sandro. I wonder how the consumer version will go topped with UK3.0?
@CarCraftAutoDetailing
Жыл бұрын
Thanks and I would tend to think that SiC would be a better option to top a consumer version of DQUARTZ, but we’ll have to see :)
Hey Sandro, random question. Do you still recommend for a beginner (own car use) the ShineMate - EX605 ?
@CarCraftAutoDetailing
Жыл бұрын
Yes, the EX605 is still an amazing DA polisher beginning extremely user friendly but also extremely capable
It was a very nice explanation Is it okay if I support CARPRO CQUARTZ Sic as CARPRO DQUARTZ + to my vehicle?
@CarCraftAutoDetailing
3 ай бұрын
Yes you can top DQ with SiC if that’s what you’re asking.
@ermanpolattimur3519
3 ай бұрын
@carcraftAutoDetailing My turn is DQ CQ pro and sic if it's not
Does layering mean that the resistance is better as the top most layer is sacrificial to get the best duration?
@CarCraftAutoDetailing
Жыл бұрын
Yes, testing seemed to support that laying rendered better durability.
Do you have recommendations for maintaining the D-Quartz coating? For example, would a weekly application of Elixir or monthly application of Reload make sense?
@CarCraftAutoDetailing
Ай бұрын
Give this video a watch as I go through all the after care and maintenance I recommend: kzread.info/dash/bejne/qIuN29lmqa6zY6Q.htmlsi=XPy2C_8M1Ja7-sIf
@SlowGT3
Ай бұрын
@@CarCraftAutoDetailing Thanks very much!
Hi Sandro! Great video. In your experience through the years with these coatings, do you think that Professional & Finest are actually benefited any in performance from a base layer of DQ (1x DQ & 1x Pro or Finest) rather than just doing a double layer of Pro or Finest?
@CarCraftAutoDetailing
Жыл бұрын
Thanks and yes. It’s only been about 5-6 months I’ve been using DQ so it can’t be conclusive, but I feel as though DQ better accepts and allows Pro or Finest to bond to it more effectively than they can over themselves- maybe it’s the tackier finish of DQ that plays a part in that being a slightly better primer/promoter than most other coatings. During testing I also found it to be the hardest coating to remove from my test panels by far, so it seems as though it will stick around longer - even after it’s behaviour has been diminished, and should help at least reduce wash swirls a little better than the rest.
@JordanWells
Жыл бұрын
@@CarCraftAutoDetailing Thank you for that info Sandro! I just completed DQ/Professional certification yesterday, so I now have those to offer alongside Nova Pro. The richness DQ added to the finish was pretty wild, and Professional has to be (to me at least) one of the most enjoyable coatings I’ve ever applied. Doing a car now with 2x Professional, but I will give DQ/Professional a go very soon! 1x DQ/1x Professional (or Finest) should be sufficient rather than 2x DQ/1x Professional (or Finest) correct?
@CarCraftAutoDetailing
Жыл бұрын
That’s great to hear mate! One layer of each is sufficient in experience and testing so far and should perform better than either Pro or Finest as two layers over themselves. But you can certainly do 2 layers of DQ topped with Pro or Finest - that could be an additional upgrade the customer can select for some increased wash swirl resistance and a touch more long term durability.
@JordanWells
Жыл бұрын
@@CarCraftAutoDetailing Beautiful, thank you for your help Sandro! About to watch your newest Supra video 🍻
@CarCraftAutoDetailing
Жыл бұрын
Hope you enjoy it mate!
How would this go against a Gtechniq CSU+ exov4? Torn between the two
@CarCraftAutoDetailing
Жыл бұрын
It’s hard for me say without doing a direct comparison
Can any of these products be made available for non-professional enthusiasts? I detail my own cars only but not a professional. Been using UK3.0 + Sic.
@dylantyler6867
Жыл бұрын
To my understanding, through an official retailer, no. Certification programs do exist though, getting in is the tricky part.
@CarCraftAutoDetailing
Жыл бұрын
Unfortunately no, they are specifically made for pro detailers to offer to their clients.
How does the newly released Dquartz GO compare to the traditional Cquartz UK 3.0? I don't have access to the pro level but I've been using UK 3.0 and am currently considering switching to Dquartz for it's hardness features. Thank you!
@CarCraftAutoDetailing
Ай бұрын
DQGO works best as a base layer which will increase scratch resistance and hardness, but I find that CQUK is still better as a more chemical/environmental resistant top layer.
@CarCraftAutoDetailing
Ай бұрын
@curtisbender1945 yes, although I’ve seen 2 layers of DQGO resist scratching better I just find it won’t resist chemical/environmental factors as much, and although 2 layers of UK will resist those factors and last longer, it doesn’t have the scratch resistance and even a little self healing that I’ve seen with DQGO. That’s why a combination tends to be optimal - as far as looks go they both look great so I don’t think that’s a factor.
@curtisbender1945
Ай бұрын
@@CarCraftAutoDetailing Thanks for your feedback! Appreciate the time you take to answer your viewers questions!
What was the time between layers with Dq + Pro and Dq + Finest?
@CarCraftAutoDetailing
Жыл бұрын
1-2hrs depending on the weather.
Does anyone know if you can top this with gliss or does it have to be finest or professional toppers to bond properly?
@CarCraftAutoDetailing
3 ай бұрын
As long as DQ is fully cured (after one month) you can top it with Gliss anytime thereafter
In your video the dquartz topped with either pro or finest reserve. In your testing is it one layer of d quartz topped with one layer of cquartz professional or is it 2 layers of d quartz topped with one layer of cquartz professional?
@CarCraftAutoDetailing
Жыл бұрын
1 layer DQ + 1 layer Pro or Finest
@sreddy1070
Жыл бұрын
Thank you! One last question any value in putting d-quartz topped with cquartz professional over immortal ppf?
@CarCraftAutoDetailing
Жыл бұрын
I’ve only done a little testing with Immortal but I feel DQ+CQP will be far superior to it’s own coating - I just don’t know how well they will bond to Immortals coating, but if they do bond well I see a great benefit there.
I have been seeing detailers using spray on coatings now days. Are you familiar with what they are using? I am not referring to the knock off aerosol cans, they are using what looks like air based paint guns and spraying the whole car. These do not seem like true ceramic coatings but I have not found actual brands from these detailers yet.
@CarCraftAutoDetailing
Жыл бұрын
Some detailers use air brushes/mini air guns for wheels and trims, perhaps even larger body panels with various ceramic coatings - I have tried this, but the coatings don’t self level so they still need to be wiped down and the paint or trim will only allow a certain thickness to bond to it so I felt like it was a waste of product, risky from a health perspective of breathing in the active particles and messy with over spray - in other words lots of cons and no real benefit from what I could see. But I know other detailers have different opinions to mine about it.
@slappy915
Жыл бұрын
I feel the same way. Anytime you spray a product you use considerably more product. Definitely seems like a waste. I can only imagine the respirator you need to wear and for how long after so you aren’t breathing that in.
Is this the same technology as Diamond Protech Body 36? Thats a 3 year consumer version. And their pro version is rated as a 10 year coating that is a 4 layer sysrem
@CarCraftAutoDetailing
Жыл бұрын
Diamond infused coatings are nothing new, but DQuartz is Carpro’s own unique formula so it wouldn’t be the same as another brands.
@snsum2853
Жыл бұрын
@@CarCraftAutoDetailing are you doing any other testing with those test panels such as resistance to waterspots and bird droppings and such? (The latter might be harder to pull off)
@CarCraftAutoDetailing
Жыл бұрын
No, all those test panels have been assessed and stripped down - get it onto some cars will be next.
1x dquartz and 2x finest reserve enough ? or 2x dquartz as base for 2xFR?
@CarCraftAutoDetailing
Жыл бұрын
4 layers is unrealistic time wise - but you can certainly do that if you have the willpower. Otherwise it depends, if scratch resistance is most import, go 2 layers of DQ, or if slickness, looks and hydrophobicity is more important, go two layers of FR.
Hi again Sandro. I know it’s not the exact product, but do you know if the new CarPro DQuartz GO is almost equivalent to this one? I heard it’s the consumer grade version of this one. And also if you had any positive experience with the DQuartz GO? I heard some mixed reviews about GO, and I’m debating whether to stick with my tried and true UK3.0 or give this one a try??
@CarCraftAutoDetailing
2 ай бұрын
I’ve only done a little testing with DQGO but it does seem to have the same great scratch resistance and hardness, but with much better slickness, and also looks a touch better as well - but is a touch less durable than the Pro version which is expected. My advice would be to use it as a base layer and still use UK3.0 on top as that’s where I saw best results during my testing.
@ONI1013.
2 ай бұрын
Interesting. For the benefits of having the top layer being the harder and more chemical resistant, what are your thoughts on UK3.0 first, then DQGO as second layer? And with either order, should I top with reload2.0?
@CarCraftAutoDetailing
2 ай бұрын
Although DQGO is harder and more scratch resistant, I don’t think it is as chemical or environmental resistant as UK3.0, that’s why UK makes a better top coat and DQGO’s scratch resistants still seems to work just as good beneath other coatings. My advice is don’t put anything over the coatings for at least one month, but after that Reload is great to use.
@ONI1013.
2 ай бұрын
@@CarCraftAutoDetailingThank you again for all your helpful tips. Taking your advice and doing DQGO base + UK3.0 as second. You think it’s worth the time and effort to try 2 layers DQGO+UK as last layer?
@CarCraftAutoDetailing
2 ай бұрын
@ONI1013. 2 layers of DQGO will add a little extra scratch resistance- that would be the main reason to do it.
Sandro do you recommend topping DQuartz Go with CQuartz UK 3.0? How many layers of each? Or should I just go with NV Evo? Just got a new car.
@CarCraftAutoDetailing
Ай бұрын
It really depends .. DQGO is going to one of the very best coatings at reducing swirls and I’ve even seen some self healing, so if that’s the goal then yes, I do recommend it and I also highly recommend 2layers topped with UK. Evo should still be more chemical resistant, durable and hydrophobic if that’s your main goal.
@Brian_N
Ай бұрын
@@CarCraftAutoDetailing super helpful Sandro. Looks like I’ll be going to NV Evo as I plan on correcting it first anyhow. Should I do 1 or 2 layers of NV Evo?
@CarCraftAutoDetailing
Ай бұрын
The current version of Evo is really formulated for single layer use as it does lay down quite thick - there can still be a slight benefit to layering but it won’t be as dramatic as laying for C/DQuartz coatings. If you have a bit left over and no use for it, I would still add a second layer maybe on a few panels to use it up. 3hrs would generally be a good time to layer Evo.
@Brian_N
29 күн бұрын
@@CarCraftAutoDetailing perfect thank you. After 3 hours or within 3 hours?
@CarCraftAutoDetailing
29 күн бұрын
You can start your second layer just approximately 3hrs - a little sooner if it’s hot, a little later if it cold.
So convenient for the manufacture that they don’t sell to private and therefore you can’t find reviews anywhere
Hello bro, you thinking which ceramic coating is the best in carpro products for amateur user
@CarCraftAutoDetailing
4 ай бұрын
CQuartz U.K 3.0 would be my recommendation
@gleamcardetails
3 ай бұрын
@@CarCraftAutoDetailing What about Dquartz Go? Is it even better? CQUK 3.0 has been my go-to coating many years.
@CarCraftAutoDetailing
3 ай бұрын
I would say DQG is better at scratch resistance and even some light self healing but seems to shine more as a base layer to UK or SiC rather than a standalone.
Is this comparable to Crystal Serum Utra?
@CarCraftAutoDetailing
Жыл бұрын
It’s comparable in the sense that they are both ceramic coatings from two reputable brands but I don’t think they are particularly similar formulations.
What is the lamp you are using?
@CarCraftAutoDetailing
Жыл бұрын
It’s called the TakeNow Hand Held Flood light - I don’t believe they are making it anymore so I can’t provide a link.
Hope you had a nice vacation from videos
I was expecting more from d quartz it looks and has worst water behavior than Nv nova pro.
Can D-Quartz be topped with Gliss?
@CarCraftAutoDetailing
4 ай бұрын
I haven’t tested that, but I see no reason it wouldn’t work if Gliss is applied once DQ is fully cured.
@kenk.7469
4 ай бұрын
@@CarCraftAutoDetailing thank you so much.
Does it regenerate under the Sun?
@CarCraftAutoDetailing
Жыл бұрын
I didn’t test that particularly, but one thing to take note of is that self or heat healing on both coatings and PPF in my experience is one of the first things to diminish well before the coating or film has reached the end of its life - so this healing feature tends to work well on fresh coatings or films rather than throughout their lifespan.
Coatings are like wine. The product costs next to nothing……it’s everything else you don’t need or care about that your paying for. You’re paying for the hype, the packaging, the marketing ,dealer kick back….etc, etc, etc.
Wheeere is the CQuartz SiC video gone 😭😭😭
@CarCraftAutoDetailing
Жыл бұрын
kzread.info/dash/bejne/c558ysqshsjFn7A.html
Not for privats..sad..!!!😮
Now thats what you call an H rated coating
Hi i am a profeesional detailer in melbourne . How can i contact u.
@kiu180
Жыл бұрын
I would like to test it
@CarCraftAutoDetailing
Жыл бұрын
You would contact waxit.com.au they are the Australian distributor
Honestly speaking carpro coatings are a rip off that get you to buy alot of shit you dont need to maintain their ceramics...ive tried it and moved on...im happy using nasiol...less is more and a single application is all you need...you dont need 50 products to maintain it
@jkroemer2685
Ай бұрын
Gyeon 👌🏽
Wax is better lol
Great video as always. I got my hands on DQUARTZ GO but havent tried it yet. Have you tried this version yourself?
@CarCraftAutoDetailing
7 ай бұрын
Thanks and yes I’ve been testing/trialing DQGO but still evaluating results.