Thank you so much! The neck joint arrived so very quickly and this tutorial made it easy enough to install. I cannot thank you enough.

@BethRamsden

29 күн бұрын

I'm so glad! Thanks so much for your support, enjoy!

This is great! Thank you so much! Shipping was fast and cheap and installing it was no problem. I’m over the moon that my Blythe doll can now lift her head!

@BethRamsden

29 күн бұрын

Great to hear your order was nice and fast! Thanks for your support!

Thank you! I have successfully changed out her neck with the neck piece that you sell. I’m so pleased x

@BethRamsden

3 ай бұрын

Thanks for your support! Enjoy the articulation 😄💕

OMG!!! This is something I think I can do!! You are so good at giving clear directions! Thank you!! I will be ordering some!! 🥰❤️🥰

@BethRamsden

Жыл бұрын

Thank you Ela! I’m sure you’ll love them ✨☺️✨

Today my husband put in 10 of your neck joints in my Blythe Dolls for me(he is a perfectionist and I did not trust myself doing them). They are wonderful!!! I plan on ordering 4 more next month to finish off my remaining dolls in my collection 😊. The only downside is he knows how many Dolls in my collection 😂😂😂. Thank you again for creative skills. Appreciated

@BethRamsden

Жыл бұрын

Wowee!! That's quite an operation! ^_^ I'm so happy, what a difference they make, right?! Hahaha! Oh no! You're so welcome, thank You for your support!!

@unique37us

Жыл бұрын

@@BethRamsden Just ordered the last 3 neck joints~ 3 lights and a tan! Decided to get them done now I have help! These joints makes the dolls look so much better 😍 Thank you 😊

I just ordered 8 of them to the US. Thank you for having a very reasonable shipping rate to the US. Can’t wait to give it a go.

@BethRamsden

6 ай бұрын

Awesome! Thank you! I managed to get them posted before they closed for new Year 👍🏻💌

@lindamitchell-fox1926

6 ай бұрын

@@BethRamsdenthank you. I just did my first one. Woo hoo. It went too bad at all, I did it on an ICY and I did have to shave a tiny bit. My icy neck does not show even a bit of the mechanism so I’m hoping I did it right. Seven more in this batch and I ordered 4 or 5 more are no doubt on their way here now. So I’m guessing I’ll either be at expert or a raging mad woman by the time I do 11 more. Thanks so much for the detailed video, quick shipping and a very reasonable shipping rate from the UK to the US. Love that she’s looking forward now.

@BethRamsden

6 ай бұрын

Oooh well done!! Hehehe you will certainly be well experienced by then!! 🫣🤩 Thank you so much!

This is fantastic! I've been in the market for a proper neck joint and have scoured all over Etsy, only to be prevented by its insane shipping. Thank you for making this available for those living across the globe!

@BethRamsden

Жыл бұрын

So glad it will be helpful! Thanks so much for your support 😄

@unique37us

Жыл бұрын

Yes, thank you for your fair prices and great product 😊

I ordered 3 of these to Michigan at a total cost of under $30. I can't wait to get them. I just changed the eyes to 2 strings and discovered the hardest part is squeezing the head open.

@BethRamsden

6 ай бұрын

It can be quite tough to get the head open! Thanks so much for the support! Hope you enjoy the new articulation! 🥰

Wow!!! This is brilliant!!!✨👏🏽✨👏🏽✨

@BethRamsden

6 ай бұрын

Thank you so much!!

Thanks Beth and husband! 😊

@BethRamsden

Жыл бұрын

Our pleasure! Thanks for watching!

Brilliant, I am awaiting my first Blythe doll, will need to place an order from you !!!

@BethRamsden

6 ай бұрын

Wonderful! Enjoy!! 🤩

@ThymewithLisa

6 ай бұрын

@@BethRamsden so excited, just awaiting my first order from you Beth!!

My fiancé surprised me with theses today! Thank you for a great product and the video directions.

@BethRamsden

Жыл бұрын

Aww that's so sweet!! I hope you have lots of fun with them ^_^

Thank you for showing me how to do this. If I decide to do this, I will go to your website and order them.

@BethRamsden

Жыл бұрын

Thanks so much for watching! ✨😄✨

Thanks for the demo. These neck joints are awesome! I've been wondering how to install them since I have few Blythes that need them.

@BethRamsden

Жыл бұрын

Ahh no problem! They're a real game changer ;)

I agree Asiralc I'm looking forward to ordering some soon x

I’m new to the Blythe community and totally in love with these dolls! Thank you so much for this detailed instruction on how to do this! I now have the confidence I can do this myself!

@BethRamsden

Жыл бұрын

Welcome! Oh I’m really glad to hear that, I know how important it is to have clear directions 😁 Thank you and good luck, have fun! 💕

This is brilliant!

@BethRamsden

Жыл бұрын

Thank you! 😄

Thank you for the tutorial Beth 🥰🥰

@BethRamsden

Жыл бұрын

Thanks for watching Jay! ✨🥰✨

Oh this is awesome Beth, thank you guys soo much for creating these. 💝🎀

@BethRamsden

Жыл бұрын

Glad you like them! Thanks for watching ^_^

Wow Beth, Thank you for an in-depth and awesome tutorial looks like a great product!! 😮🥰💖😍❤️

@BethRamsden

Жыл бұрын

Thanks so much Dorie! ✨☺️✨

Incredible

@BethRamsden

Жыл бұрын

Thanks! 😊

Both of you made a great pieces!💜💜

@BethRamsden

Жыл бұрын

Thank you! 😊

Wonderful 😊 you make it look so easy. Nice job!

@BethRamsden

Жыл бұрын

Thank you! It’s definitely worth the work 😉😊

Awesome,, just purchased some! Can’t wait to try them out 😊

@BethRamsden

Жыл бұрын

Awesome! Thank you! I’m on my way to the post office with your order now ✨😁✨

Thank you for producing one that a actually works! I know it’ll be a slow journey to the USA but my girls are looking “forward” to them 😂

@BethRamsden

Жыл бұрын

Thanks so much for your support! Yes shipping is kind of bad at the moment, but hopefully won’t take too long!! ☺️

Looking awesome job 👍👍👍👍

@BethRamsden

Жыл бұрын

Thank you so much 😀

I've still got 2 of your joints to try out. I need to get a hand drill like you use. Looking forward to my dolls looking up!

@BethRamsden

Жыл бұрын

Ooh exciting! Yes I think drilling the pilot hole by hand is worth it for safety and accuracy 😁 I learned the hard way!! 🤣

Nicely done

@BethRamsden

Жыл бұрын

Thank you! ✨😁✨

😊 my girls need an upgrade 💕. Thanks Beth 🌼

@BethRamsden

Жыл бұрын

Thank you for watching Patty! ✨☺️✨

I absolutely love these! Might have just ordered two from your website! 😄

@BethRamsden

Жыл бұрын

Glad you like them! Thank you so much!! ✨🥰✨

Ive just ordered two can't wait to receive them Thank you Beth x

@BethRamsden

Жыл бұрын

Thank you so much! I’ll get it in the post for you Monday morning! ✉️ ✨😁✨

@lisapalmer1663

Жыл бұрын

@@BethRamsden They were great, I have ordered two more LOL Thanks Beth x

@BethRamsden

Жыл бұрын

@@lisapalmer1663 oh wow, thank you so much! ✨🤩✨

@lisapalmer1663

Жыл бұрын

@@BethRamsden Your very welcome they are really good x🤩

Thank you for this Beth i have just order one and the stand 🥰🥰

@BethRamsden

Жыл бұрын

Thank you Sara!! 🥰

I just fixed the neck on my first one using one of your neck joints, and it was not as hard as I thought it would be, mostly I just have weak hands, but I'm thrilled!!! with the results!!! THANK YOU!

@BethRamsden

Жыл бұрын

Yayy! I’m always happy to hear that people are finding this easier than they thought 🤩 So happy that you are happy! ✨🥰✨

These seem like a great idea! And you make even removing the head look so easy, when just the thought of it makes me feel nervous if I'm honest.

@BethRamsden

Жыл бұрын

I used to jab so many screwdrivers into my Blythe heads back in the day, now I just crush their heads with my mighty hands!! 🤣 no but really, it takes practice to feel more confident with it 😆 have you done much beheading before? (Totally normal question of course)

@MarchPaynesMidlifeDollyCrisis

Жыл бұрын

@@BethRamsden I haven't managed it yet! But I need to swap a scalp over at some point so definitely need to be bolder. I just have visions of myself cracking a faceplate.

Fabulous Beth, I will definitely buy a couple of tanned neck joints in the near future. I’m planning on going to Blythe con. I will come to find you. If you want to see me before hand, so you know who I am, I’m on KZread. x

@BethRamsden

Жыл бұрын

Thanks so much for your support! I look forward to seeing you there ^_^

he he he Craig and Deron are always tweaking. ;-)

@BethRamsden

Жыл бұрын

Yes they are! There are always little improvements that can be made 😉

Danny's neck joint it still works pretty good though

@BethRamsden

Жыл бұрын

I’m so glad!! It took quite a bit to get it to look right, I’m so glad it’s working well 😄

I absolutely love all of your videos! I especially enjoy watching you open up the gifts in the collab exchange videos. Your face just lights up like a little girl on Christmas morning! I just love it! I am just starting my new addiction!, (Blythe hobby!l. I love these dolls and as a general crafter I find these dolls particularly enjoyable and love working on my doll already. I recently ordered one of your neck joints from your etsy page. I live in the U.S. will I be getting this new split neck joint or the first one? Also any idea when I can expect shipping?? I am looking forward to more of your videos, especially the gift exchange collabs! 😊 Thank you so much!

@BethRamsden

Жыл бұрын

Thank you, that's so kind! ^_^ I find Blythe to be so accessible, and customisable, it's a great way to try out all your crafty skills in one package XD Thanks for ordering a neck joint! I do believe you have the newer design. It's already well on its way to you, so hopefully won't be much longer! Thanks! ^_^

It would be so helpful if you'd tell the exact sizes of the drill bits. I'm looking forward to ordering your neck joints!

@BethRamsden

2 ай бұрын

Hi! The screw is 3mm wide, so the drill bit should be about 2.5mm at most. Start with a 1mm bit, then increase in size gradually, up to 2.5mm Hope that helps! ^_^

Gracias!! Acabo de pedir de estas conexiones en tu página web y gracias a este vídeo creo que voy a ser capaz de conseguir que mi blythe deje de mirar hacia abajo!! 💖 Espero que me lleguen! 😅

@BethRamsden

9 ай бұрын

Thank you so much! Yes hopefully your order will be with you very soon! 🤩

You made that look so easy! Going to order one, hope it works. Can you tell me which AliExpress shop you got your Blythe from? She is very pretty!

@BethRamsden

Жыл бұрын

Thanks Rhonda! It was either Blythe Homes, or The Show 🥰

I can't wait to order some of these soon do they fit Icy dolls too Beth? X

@BethRamsden

Жыл бұрын

Thanks Jenny! Yes, I just have one Icy head that I already tested it on, and it fit perfect - As long as the two halves of the head have the right shaped 'sockets' to push the joint into, it should be fine ^_^

What is that drill called? I need to get one! All I have is a power drill.

@BethRamsden

Жыл бұрын

I usually hear people call it a Pin Vice, you might find them by searching for hand drills too?

@ChristysReborns

Жыл бұрын

Hey Ela I just got one from Ali express 😊

Would the neck joint fit an OB22 body please?

@BethRamsden

10 ай бұрын

No, this neck joint was made to fit the jointed Azone-style neck type. We do want to develop a type that will fit the Obitsu body soon though.

@maryahogan121

10 ай бұрын

That'd be great thank you

Can I use this on azone pure neemo body ?

@BethRamsden

Жыл бұрын

It's only designed for use with the body type you see in the video, which has the solid neck (no moving neck peg). Since the joint is screwed into the neck, it must be solid. Hope that helps!

Where can I buy just one of these joints? I searched in Etsy and only a couple of stores sell some and are outside the USA and the shipping is so high.

@BethRamsden

3 ай бұрын

Link in the description ☺️ bethramsden.com

Do you ship to the USA?

@BethRamsden

Жыл бұрын

Yes there’s shipping options when you’re checking out on my website ☺️

Hi. I need these for my dolls can i buy the stl file to print it myself?

@BethRamsden

Жыл бұрын

Hi there! You’ll find them in my shop, bethramsden.com with worldwide shipping 😊

@niloahmadi5556

Жыл бұрын

@@BethRamsden May i buy the Stl file? I promiss i just print for 5 dolls and never ever give it away. I pay for 10 .

@BethRamsden

Жыл бұрын

No I’m sorry, we are only selling these as a physical product 😌

Do you think this is something that could work for pullips too?😮

@BethRamsden

Жыл бұрын

I’ve not seen inside a Pullip before, but I think it would have to have the same internal space that the Blythe has for the neck 😔

Can you please ship to the US? I’d really love to try these

@BethRamsden

Жыл бұрын

There’s US shipping already available, just select it when you check out your cart 😄

@Heavenlyartdolls

Жыл бұрын

@@BethRamsden no. I when though the whole thing and still listed my address as uk

@BethRamsden

Жыл бұрын

@@Heavenlyartdolls Hmm, perhaps double check your own information in Paypal? Or clear your website cache/cookies? I’m sending orders out to the US every week, so I don’t understand why you can’t see the option, sorry! 😅😔

@Heavenlyartdolls

Жыл бұрын

@@BethRamsden 😢

@Heavenlyartdolls

Жыл бұрын

@@BethRamsden so do I ignore when it says my address but with UK?

With these neck joint could they look up and down? 😅

@BethRamsden

Жыл бұрын

Hi! Yes it's shown in the video how much they can tilt forward and back, as well as side to side ^_^

@yukitoxmiyu

Жыл бұрын

​@@BethRamsden thanks, i just placed an order 😊😊

Como e o nome dessa peça

@BethRamsden

Жыл бұрын

It’s a Neck Joint ☺️