just bought a QC and have been struggling with how to start with creating scenes for live use, this video was super helpful. thanks!

Mate, quality playing. I’ve had my QC for around a month now and am up to speed with most of it but I click your videos to hear what you’re putting down. Love it 👍🏻

Nice catch up at the end with the copy/paste feature. I was going to comment about it.

Pulling the screen up, I would have never guessed... Thanks!

This is great, thanks.

Nice video and preset. Do you have any tips for working through the footswitch's in low light ?

John can you get controlled feedback from these types of modelers in a live situation? The good kind of mid-range feedback where a note just blooms when you hold it?

the global scene adjustment was so frustrating. Thanks for that clarification. So basically - a scene should only be set once the general parameters of the scene in its entirety are worked out.

@johnnathancordy

3 жыл бұрын

To some extent I think that might be the quickest way to do it yeh?

@betolara4701

Ай бұрын

That's also an awesome feature at the same time. I play for a church so being able to have the settings of a reverb change depending on a scene would save me a ton of space on the blocks. It is a little tricky to navigate though, I do agree.

With the HX Stomp I can send "Instant" MIDI message per Snapshot. It doesn't seem like the Quad Cortex can send MIDI message per scene, only per preset. Is there a workaround that will let me send MIDI PC message when the scene changes? Use case: Analog drives in front of the QC controlled by the Morningstar ML5 MIDI-controlled loop switcher. When the song goes from Verse to Chorus (scene change) I want to send a MIDI PC message to the ML5 that kicks in a boost pedal.

It I am in a scene and I want to toggle on or off and effect block in the chain, do I got to stompbox mode, then do it in there, then switch back to scene mode again (if I want to stay in scene mode)?

Oooh this is good video, informative and not this vs that vs us vs you. Like placed

@johnnathancordy

3 жыл бұрын

Any further ideas for videos will be appreciated - they don't get as many views but hopefully it's useful?

@Niksounds

3 жыл бұрын

@@johnnathancordyimho reamping is a great aspect to explain, for example

Lets say that we are in a specific bank looking the screen with the labeled scenes (our custom scene name). Going to the next bank will lose that view and we have to swipe up all over to look the names of our scenes? Thanks in advance

Hi, Thanks For The Video, How can i should use it the best if i wanna for Exemple Switch The Disto From a Solo Effects and then on very Clean Ambient Effects ? Wich Is the best to Use ? Preset Mode ? Stomp mode ? Or Scene Mode ? And How ?

How can I acquire that Dumble overdrive capture?

You can hold a stomp and then copy that scene to another, that’s way faster instead of being one by one scene bypassing each block. Btw could you please share the VHT clean capture? I have made some of the Amp Snob Archetype Cory Wong and I shared them in the QC cloud, and I’m currently locking forward to achieve a really close Dumble tone with my QC. Also, congrats on your videos!

@johnnathancordy

3 жыл бұрын

Depends - what if I've got my preset where I want it basically but I want to add a drive at the front - copying the scene with it bypassed would just undo all the other work that I've done to get the preset ready?

@diegogonzalezmoraga4005

3 жыл бұрын

Sure! That depends on what you want to do with the scenes, I just thought would be nice to comment that for those that don’t know. Regards!

@johnnathancordy

3 жыл бұрын

@@diegogonzalezmoraga4005 I haven't done a VHT clean capture - but the drive one is up on the cloud!

@diegogonzalezmoraga4005

3 жыл бұрын

@@johnnathancordy thanks! I thought you had done one capture because above the VHT OD it says VHT clean, but now I know that’s maybe from another user

@johnnathancordy

3 жыл бұрын

@@diegogonzalezmoraga4005 Jake actually did capture it too but it came out shite

Hey John, couple of things I had not worked out.. thankyou Quick questions on ac2fun preset , looked for the dude capture but couldn’t find anywhere ended up replacing with another dude capture someone had posted. 2nd question more of an Investigation if your up to the challenge, been struggling with clipping issues with some captures in a chain and specifically trying to use wet stereo effects in the loop ( maybe strymon for example) at unity Or at100% wet mix I have narrowed this down to captures that are recorded too quietly, I do not get the same clipping issues if I replace the said capture with a stock amp or well captured amp such as tone junkie for example. The clipping is quite extreme, it has taken a few days of messing with in / out levels, dropping various points in the chain below unity to realise this might be the problem. I guess this would make sense as you then try and boost the chain to match other presets but this then clips the return level on the effects loop which doesn’t quite seem to have head room to cope. A good capture to test this with is ‘Mercury V’ capture on cloud, great amp, clean capture but quiet... is causing the clipping issue. Sorry if this really boring and doesn’t peak interest... understandable .. Cheeky final question... would you be allowed to share jakes dumblish capture😬(fez2107.. following) , coffees on way promise Right if I haven’t bored you to death, I’m orf!

@johnnathancordy

3 жыл бұрын

Final question was the easiest one so I've done that haha!

@stevefearon9337

3 жыл бұрын

@@johnnathancordy thankyou bud.. the rest is just head flowers 🌸 I’ve been here growing on my own and no one to share them with. All real things I think, I posted something similar on the community page, but no one seems to be encountering similar clipping fun... or frankly it is just so boring and obvious no one cares...to comment... this quite possible I have definitely been fighting headroom issues on the fx loop, only time will tell if it is something. Anyone else encounters using external pedals in the loop with some captures. Thanks for the reply.... genuinely orf!

@stevefearon9337

3 жыл бұрын

Additional point... ran VHT Capture duel, same capture on input 1and 2 chain, had to run that capture at minus 6dB to stop clipping on the effects loop return 1and 2 with eventide H9 in stereo in the loop...at unity..... moral of this fairytale is if the Capture is too quiet or too loud it can crash the return level of the fx loop causing clipping with nothing else in the chain... idea for a video...someday down the road... managing clipping on the quad cortex, if you are not asleep by now, hope this monologue provides some material sometime... down the road Thanks JC legend ! ORF..

@johnnathancordy

3 жыл бұрын

@@stevefearon9337 so it's the fx loop clipping?

@stevefearon9337

3 жыл бұрын

@@johnnathancordy I believe so if you put an effect in stereo at unity and switch on and off the fx loop block with the same channel volumes the clipping goes, checked and double checked using different cables and different wet effects. So far same result... but entirely depends on which capture you are using... which makes perfect sense obviously unity or 0.0dB on one capture is not nessecarily the same depending on how the capture was recorded. But if you remove the effects loop and external pedal you won’t probably notice it as all volumes are internal and not relative to unity on the external pedal uou are using in the effects loop.. at least that’s what I think.. obviously you can turn everything up and down respectively to cancel the clipping but then in the case of a capture that is too quiet and clipping the fx loop ... it is hard to bring that patch up to volume and inline with other presets. Before go any. Further, completely understand every patch on any unit has to be tuned, not saying this an issue... but is something I am finding time consuming on the QC using external pedals that I have not found so much of a problem on my other brand modellers... it is a learning curve,.... and obviously still allowing for school boy errors on my part, which would make me feel a prat as been messing with this for 3 days now to come to the conclusion that it is headroom on the fx loop that I am bumping against..

Great

It is possible to make a scene with two presets that i already have?

this thing is confusing af yo, thanks for the help john

Please add your affiliate links for all hair care products. Thanks for the QC stuff.

@johnnathancordy

3 жыл бұрын

Loool

Neural definitely needs to update the Scene states. It should pop up 1) this scene on 2) all scenes on 3) all scenes off. Easy

Just got the QC used. Every time I change something it changes it globally and I end up resetting everything. I wanted to set it and forget it. I’m sure it’s user error but it just shouldn’t be this hard.

I don't believe I've ever seen a whiter kneecap in my life.

always better than a gay from ipanema ;)

@johnnathancordy

3 жыл бұрын

You said it, not me...

@wasichu66

3 жыл бұрын

Now we need the gothic version in minor key, the Guy from Dunwich.

@boleofficial9291

3 жыл бұрын

@@johnnathancordy hahahahahahaha

@boleofficial9291

3 жыл бұрын

@@wasichu66 the gay from dunvich hahahahaha

@wasichu66

3 жыл бұрын

@@boleofficial9291 oh I don't think Lovecraft would approve that version ;P