Need help with: Code:
I apologize for the explanation. I never do videos of me explaining or talking so i don't know what to say. I have problems with my old camcorder and i really hope some of you can help me with them.
I apologize for the explanation. I never do videos of me explaining or talking so i don't know what to say. I have problems with my old camcorder and i really hope some of you can help me with them.
Пікірлер: 95
used to work periodically, now has given me that error for the last time...not working anymore
Long story short... i had the same problem as everyone. Took everyone advise and smacked the shit out of the camera and it worked!! THANK YOU lol
@estilosay
Жыл бұрын
BRO, I SWEAR I've watched 6 different videos before this trash. Read your comment, smacked the shit out of my camcorder and IT WORKED!!! Sometimes u get better results from the comment section. Thanks for sharing.
@Raka35mm_
8 ай бұрын
BROOO! IT WORKED! thanks a lot!
@TGP.Productions
7 ай бұрын
YOU GUYS AREN'T GONNA BELIEVE THIS! IT WORKED!
@quazegriffin7927
6 ай бұрын
Where is a good place to get the cassettes for it ?? Everywhere I look they’re expensive lol
@TGP.Productions
6 ай бұрын
@@quazegriffin7927 they are gonna be expensive considering no one mass produces them anymore
Why does EVERYONE have the same problem with these?
The fix suggested by @UC6LmrsV29cGwhskxAcn6pnA worked first time, for me. I just tried hitting the bottom with reasonable force. When my wife complained I did the same with the camera. And, Hey Presto! It's working! Thanks so much 🙂
I had the same problem. Found out that the bottom 4 screws on the silver side was too tight or I had tightened them too much when I had opened to check. The mechanism was getting jamed due to the 4 screws overtightened. Just loosen those 4 screws and tighten them ever so slightly. The problem will be fixed forever.
@Yauale
2 ай бұрын
Which silver piece?
You won't believe this but I just fixed my camcorder! After trying everything I could possibly try I got frustrated so I put the tape in, took out the battery, gave it a couple smacks on each side (a little hard out of frustration), then I put the battery back, turned in, and hit play. Voila! Problem solved!! I can't believe it! Hope this helps haha :) Let me know if you give it a shot and works.
@rafaeli.garcia6562
3 жыл бұрын
Hmm.. interesting. I'll try it for sure. Ill let you know. In fact im going to make it a video of it xD
@TekaLopez
3 жыл бұрын
@@jawknee4088 Sorry that didn't work for you, it definitely worked for me on TWO camcorders (same make and model).
@qonda1527
3 жыл бұрын
Wow can’t believe it. It worked. Lol
@sinton-whites
3 жыл бұрын
Bahahaha, I'd tried everything too and it worked for me!
@TekaLopez
3 жыл бұрын
@@sinton-whites Happy to hear that! Lol
hey man its been 2 years. Have you solved the problem yet? Im having the same issue with mine. In the sony manual it says the code means theres moisture inside the system and the solution is to leave the tape compartment open for an hour for that moisture to dry up but it didnt work for me so next thing im gonna do is buy a cleaning tape and pop it in and see if that works
I have the exact same issue, can't find anything on youtube that works. Have you had any luck?
@claystunes6096
2 жыл бұрын
Just lossen the bottom four screws on the silver side and the mechanism will be free to move. These 4 screws are too tight.
Where do you find the pinch roller from
I have the same one. With the same problem. The battery is old and no good. I removed the battery and plug it in with the wall charger and behold problem solved. I have inserted many a cassette and the problem has not duplicated. Good luck hope this works for you. Like if you agree.
Can the USB system be setup in the sony digital video camera recorder DCR TRV285?
@rafaeli.garcia6562
2 жыл бұрын
Yeah, if you have the right cables. You can even use it to be a web cam. I did that when I had it working.
What’s the rubber called? I’m missing the rubber on my camcorder... help!
@r4yvenxmusic_official
5 ай бұрын
pinch roller
Smacking a little the bottom of the camera solved the issue
@ahmedsa8461
3 ай бұрын
How?
@oouje
3 ай бұрын
@@ahmedsa8461 turn off the camera, remove the battery, smack the bottom of the camcorder with your hand or knee, do it kinda hard, put again the battery and turn it on and see if its fixed, it worked for me
@ahmedsa8461
3 ай бұрын
@@oouje haha 😄 cost me 40 $ to be fixed 🔧
hey bro, I have the exact same problem. I've tried any of other youtube suggestion for fixing this, but still, mine still not working. Is there any other tips?
@rafaeli.garcia6562
3 жыл бұрын
In the comments, one guy came up with a solution, Check it out. Maybe it will help. It didn't help with my problem but maybe it can help with yours.
@haikalprabas1307
3 жыл бұрын
@@rafaeli.garcia6562 never mind bro, the white little part on my camcorder was broken so yeah. I have to 3d print those small things. Thanks fir your suggestion!
@claystunes6096
2 жыл бұрын
Just lossen the bottom 4 screws on the silver side. Fixes this problem forever.
@vvvippperrr
Жыл бұрын
@@claystunes6096 hey man is it possible to show us these 4 screws one by one ?
Saludos, hoy despues de años con este problema lo sulucioné como muchos abajo sugirieron... saque la bateria, de di unos golpes a la filmadora y le enchufe directamente el cable de la corriente y sin bateria y funciono... ahora funciona inclusibe con la bateria puesta.
@rafaeli.garcia6562
8 ай бұрын
Despues de que me compre mi camara sony 4K ya no le di importancia. Creo que volvere a tratar de arreglarla una vez mas.
A minha tbm faz isso.qual será o problema?
a little too late but it couldbe useful for someone. i tried cleaning the tape heads with 99% isopropyl alcohol but that didn't work... so i left a tape in, took out the batterry and smacked the tape side of the camera a few times. it worked
@rafaeli.garcia6562
6 ай бұрын
I was going to do that and do a video of it, but it started working like nothing happened.
that rubber is missing in my camcorder. anyone knows how i can diy this or get another one?
@HavenMarket
9 ай бұрын
it might be still in the camcorder rattling around
@r4yvenxmusic_official
5 ай бұрын
dat rubber is called pinch roller
This is common on these camcorders. You need to open the camcorder and re-seat the 3 ribbon cables inside.
Pull the battery and plug into the wall power supply. Only way mine will work. Batteries are old and the charge capacity has probably disappeared. I ordered new batteries and will let you know if that takes care of the issue.
@teresatilley1
11 ай бұрын
Did it work?
неисправность т катушки.приёмный подкассетник.датчик холла не выдаёт сигнал на процессор.
@locs9885
2 жыл бұрын
Как это чинить ?
Did you try a different cassette
@rafaeli.garcia6562
3 жыл бұрын
yeah. I have a few new ones, never used them.
hahahaha, I plugged it in straight and gave it a swipe next to the cassette with the cassette on and it worked, thanks!!
i have also same problem
Open parts all and clean all the connectors
Feb 14th 2024 i found my old camcorder that i bought in 2007. I stopped using it due to the same problems everyone else has had. So today i decided to try and fix it. After 2hrs of doing most everything i saw on u tube. The last thing left to do was to bang on the side of the tape with hard blows of the palm of my hand. It works again! Thanks everyone for all your ideas.
solved?
@rafaeli.garcia6562
3 жыл бұрын
nope. any suggestions??
@EmilioPfeifer
3 жыл бұрын
no. in fact, I have the same problem. :(
@rafaeli.garcia6562
3 жыл бұрын
@@EmilioPfeifer I tried to clean the heads but instead of that, i broke the small pad that actually clean the heads xD
@EmilioPfeifer
3 жыл бұрын
._. damn
@rafaeli.garcia6562
3 жыл бұрын
@@EmilioPfeifer yup. but its ok, i have an older camera and I can spear the missing part. No big deal. but that why im asking for help