Neck Dimensions
Тәжірибелік нұсқаулар және стиль
This episode covers questions viewers have emailed me about dimensions of the raw materials, overall neck length and string spacing at the nut.
Links:
Ken's Facebook page: / kpcigarboxguitars
Contact Ken: kpcbgs@gmail.com
Music tip: Giants of Hill Country Blues Volume 1 (1927-1938) www.wolfrec.com/index.php?g=cd...
Margaret Garrett talks about the Mr. Airplane Man cigar box guitar: • Paul Mero Junkpile Gui...
The Airline guitar in concert: • Bob Log III- Rattler o...
Пікірлер: 34
Thanks so much Ken ! This video is really helpful. And thanks for the mention. !
If i could only say thank you a hundred times. You sure are helpin out this newbie!!!!
Good video. Thanks for cd heads up. Thank you.
Thanks for all the good info. It is very helpful. Appreciate your time.
@paulmerojunkpileguitars
5 жыл бұрын
Thanks Franko S.
Really well done video - thank you!
Beatifull guitarrs🌈🎧🍀🎶🍀🎨✌️👏👏📻❤️🧘
Thanks for the video! Dimensional lumber in the US is 1/2" smaller in both height and width than how they are sold. The neck stock that you are using (3/4" x 1 1/2") started as a 1" x 2" rough-cut piece of wood. Once dried, the mill will plane 1/4" off of each side, making the final product the new dimension.
Muchas gracias Maestro !! Saludos
@paulmerojunkpileguitars
6 ай бұрын
Thanks for watching)))
When i build a diddley bow or a cigar box guitar i copy all the neck dimensions and bridge placement from a 6 string guitar i have including the fret spacing, they all sound great, it's just easier for me, thanks for the great video👍.
@paulmerojunkpileguitars
4 жыл бұрын
Perfect. Thanks for watching Scott
Hey Paul, Should the spacing between the edge and center strings at the nut be the same as the spacing established by the tail?
When would is sold as 2 inches, they are referring to the dimensions of the green cut wood. The wood shrinks when drying.
@dwsnsgp
4 жыл бұрын
sivad2 not completely. They are losing some due to the saw curff in the Wood. You have to pay for that too.
Looks like you had 11 and 12 mm between centre and outer strings there not 7.
@thurgogopro5338
3 жыл бұрын
Yep I agree there was no 7mm measurement there, although over here we don't use new fangled fancy metric systems so I make it 10 to the minus 6 of a mile LOL.
What is the name of those brass nuts on the threaded nut?
@paulmerojunkpileguitars
2 ай бұрын
Acorn nuts. Lamp parts section
Some English woodworkers use inches saying that is better for fine work. I dunno, I can't cut a straight line
Hi, you're videos are excellent. What wood did you recommend for the neck?
@paulmerojunkpileguitars
6 жыл бұрын
AlmostAnalogue oak, poplar or maple. Check the precut lengths at the hardware store Thanks for watching
@bendunkelman4853
5 жыл бұрын
@@paulmerojunkpileguitars is soft Maple ok?
Do you live in Wisconsin? If so, whereabout?
@paulmerojunkpileguitars
Жыл бұрын
Not since 1980
In Europe we use the metric system, unless we talk about television screen size or rims. The reason they say it’s 3 inch but when you measure it’s 2 1/2 inch is because you measured it flat, they measured it across or diagonally. Hope this will clarify it to some Ignorant metricphobes out there
@paulmerojunkpileguitars
4 жыл бұрын
hallobre I sho hope so. Thanks for watching
Umm play the instrument. Good video anyways.
@paulmerojunkpileguitars
3 жыл бұрын
I would if I could. Thanks for watching.
We live in America. Stop the MM crap...
@paulmerojunkpileguitars
5 жыл бұрын
pat welch not to worry Mr Happy, they’ll cover it in 4th grade
@scotthunt9055
4 жыл бұрын
Love the metric haters😂😂😂
@timothy5974
4 жыл бұрын
Have you worked on your cars lately?
@johnmckernan151
4 жыл бұрын
OK Boomer, Pretty sure even engineering courses in the US are in metric.