If you're trying to obtain your rigger 1 NCCCO cert. These are the knots you will be tested on. tieronecrane.com
Жүктеу.....
Пікірлер: 44
@erasmolopez56794 күн бұрын
Very clear; excellent demonstration and way to learn well; THANKS
@recklessroges9 ай бұрын
I call the working end the "working end" rather than the running end. Two half hitches ABoK#54 is usually tied with tension on the standing end because that is the usual direction of load and will cause the inner half hitch to roll if tied the way that you demonstrated. The sheet-bend is my second favourite knot, but I always mention that there is a double sheet-bend exists because the coefficient of friction with modern plastic ropes is so low that the extra turn is often required.
@johnnierobinson95122 жыл бұрын
Very useful, demonstration repeated twice and slowly was an excellent illustration
@deuashachai2 жыл бұрын
Very nice. Thank you for an easy to follow reference. Stay safe my friend
@denisefinlay194324 күн бұрын
Very simple well demonstrated. Thanks
@foreignthang85398 ай бұрын
10/10🎉 love it !! First timer here 100% clear
@victormbanga33552 жыл бұрын
This is beautiful I remember my first day in the training it was heavy to start it.
@trisaxyt83382 жыл бұрын
Big help. Thank you!
@chrisbrogdon50962 жыл бұрын
Awesome 👍😎 very informative video thanks man
@rajasekharvenda11552 жыл бұрын
Very clear explanation
@mserrano1772 жыл бұрын
Very good video, thank you sir
@lancerudy9934 Жыл бұрын
Great video! Thanks
@gurunathbhat902 Жыл бұрын
Thanks for the video.
@Galihdutasuseno Жыл бұрын
Thankyou so much sir i need this
@abdulkkhan5095 Жыл бұрын
Fantastic thanks.
@DavidDanie12 жыл бұрын
Excellent. A+
@Ravi-wm8yw5 ай бұрын
Thank you
@gjjakobsen2 жыл бұрын
Great video with easy to see knotting. I saw a well drilling company wrap a chain around a length of rigid and pull it up with a winch. As it rose, they were able to clamp it in place and slide the chain down the length. What kind of knot is used for pulling a pipe?
@tieronecrane
2 жыл бұрын
That’s interesting. The weight of the chain itself would have played a big roll in it being able to slide off. The most common/simple relation I can think is maybe just multiple overhand knots placed incrementally along the pipe. Also, The actual ‘pipe hitch knot’ is most common for pulling pipe. This would be done with rope though. Hard to say how they would have done it with chain.
@welovephilippineswithmylov54193 ай бұрын
Thanks
@RajanSharma-ym2tg2 жыл бұрын
Good 👍 👍
@shafeeqabbasi5714 Жыл бұрын
Hi sir I must say you r master of different knots
@austinyun Жыл бұрын
I think you need more tail on the bowline.
@sender388110 ай бұрын
Never heard “inside” bowline. It’s either a bowline, or a false bowline. The latter pulls through and fails under enough load or stress. Also, the terms or verbiage used is incorrect. We’d be happy to help! DM!
@russellpeffer773610 ай бұрын
I can't speak for all knots. But i can tell you it doesn't matter with a bowline. Left side over or underhand. It's s the exact same knot. Just faced a different direction.
@recklessroges
9 ай бұрын
Not quite. The "inside" is the original "real" bowline. The outside is sometimes called a "winter bowline" because it was used on fishing boats in the north Atlantic where the ropes would freeze together - by having the tail on the outside it could blow in the wind and reduce the chance of it freezing to the loop. Also the ABoK page 16 starts the conversation about direction of tension being with the loop and against the loop. They end up with different maximum load strengths. (But if you reach those levels you're using the wrong rope.)
@russellpeffer7736
9 ай бұрын
@@recklessroges every time I've tied it, the running end has been on the inside
@jobaeidkhan1222 жыл бұрын
Bowline hitch was easiest process
@infeedel7706
Жыл бұрын
Bowline is not actually a hitch, it's a fixed eye but if you look closely you will see the sheet bend. Clever folks would use a half hitch in the tail when tied in kernmantle or marlow type braidlines dues to their inherent slipperiness...
@imarigger20yearsexp58 Жыл бұрын
you a og rigger, I respect that
@Craftybankrobber8779 ай бұрын
Can i have the pass?
@JamesZJi2 жыл бұрын
two half hitch?? that`s can`t be a rigging knot!
@jeromesegunto3651 Жыл бұрын
you mean Deez Knots?
@bilgeratjim2 жыл бұрын
Bight, not bend.
@recklessroges
9 ай бұрын
A bight can be made anywhere in the rope, but when talking about knots in the end of ropes a bend is the correct term when connecting two ropes because you are "bending them together". That's why the knot is called a sheet-bend and not a sheet-bight.
@Chris90. Жыл бұрын
that bowline is way overcomplicated. can be done with 1 whole less step
@recklessroges
9 ай бұрын
Yes, there are faster ways, but the slipknot method is easier for most people to remember.
@Chris90.
9 ай бұрын
@@recklessroges so there's a bowline method called the "Slipknot?" or there's a whole different knot called the slipknot that is more efficient?
@mykalimbaАй бұрын
I thought that bowline was pronounced "bowlin", as if there was no "e" at the end.
@infeedel7706 Жыл бұрын
Actually, the double sheet bend is the bend used to bend two lines of different diameter, you also failed when you had both tails finish on the same side making a suicide bend. Second, your square knot is NOT a square knot it was a Reef knot (square knot finishes with tails perpendicular to the lead. Third hitch, this is getting well and truly tiresome: Yep, sure you tied it correctly, but you failed to explain that it needs a half hitch about the lead to lock the clove. The Clove hitch is only used to secure a load and never for releasing a load under tension, they also are well known to shake loose and give way under repeated vibrations and load/unload tension cycles. Lastly, your two half hitches should be used after taking a full turn about the item you are hitching to. This is known as a round turn and two half hitches, this hitch was designed and is used to release under tension whilst maintaining control of the load. The round turn was also understood and known as a "snubber" turn (the round turn about a spar creates friction, which is why the two half hitches were used with the round turn), we used to use these even around shackles which allowed us to lower 4-600 Kg loads on 14mm synthetic kernmantle line. But what would I know from 33 years of rigging in 10 Countries?
@KOLD504
Жыл бұрын
Ok captain tying knots.
@matthewkile8
10 ай бұрын
You'd be a lot cooler if you linked a video demonstrating these points
@airbourne145 Жыл бұрын
pronounced (boh-linn)
@recklessroges
9 ай бұрын
Not everywhere. The bowline is ancient and has had many names and pronunciations. There is no one definitive name or pronunciation. In French it's called "the chair knot".
Пікірлер: 44
Very clear; excellent demonstration and way to learn well; THANKS
I call the working end the "working end" rather than the running end. Two half hitches ABoK#54 is usually tied with tension on the standing end because that is the usual direction of load and will cause the inner half hitch to roll if tied the way that you demonstrated. The sheet-bend is my second favourite knot, but I always mention that there is a double sheet-bend exists because the coefficient of friction with modern plastic ropes is so low that the extra turn is often required.
Very useful, demonstration repeated twice and slowly was an excellent illustration
Very nice. Thank you for an easy to follow reference. Stay safe my friend
Very simple well demonstrated. Thanks
10/10🎉 love it !! First timer here 100% clear
This is beautiful I remember my first day in the training it was heavy to start it.
Big help. Thank you!
Awesome 👍😎 very informative video thanks man
Very clear explanation
Very good video, thank you sir
Great video! Thanks
Thanks for the video.
Thankyou so much sir i need this
Fantastic thanks.
Excellent. A+
Thank you
Great video with easy to see knotting. I saw a well drilling company wrap a chain around a length of rigid and pull it up with a winch. As it rose, they were able to clamp it in place and slide the chain down the length. What kind of knot is used for pulling a pipe?
@tieronecrane
2 жыл бұрын
That’s interesting. The weight of the chain itself would have played a big roll in it being able to slide off. The most common/simple relation I can think is maybe just multiple overhand knots placed incrementally along the pipe. Also, The actual ‘pipe hitch knot’ is most common for pulling pipe. This would be done with rope though. Hard to say how they would have done it with chain.
Thanks
Good 👍 👍
Hi sir I must say you r master of different knots
I think you need more tail on the bowline.
Never heard “inside” bowline. It’s either a bowline, or a false bowline. The latter pulls through and fails under enough load or stress. Also, the terms or verbiage used is incorrect. We’d be happy to help! DM!
I can't speak for all knots. But i can tell you it doesn't matter with a bowline. Left side over or underhand. It's s the exact same knot. Just faced a different direction.
@recklessroges
9 ай бұрын
Not quite. The "inside" is the original "real" bowline. The outside is sometimes called a "winter bowline" because it was used on fishing boats in the north Atlantic where the ropes would freeze together - by having the tail on the outside it could blow in the wind and reduce the chance of it freezing to the loop. Also the ABoK page 16 starts the conversation about direction of tension being with the loop and against the loop. They end up with different maximum load strengths. (But if you reach those levels you're using the wrong rope.)
@russellpeffer7736
9 ай бұрын
@@recklessroges every time I've tied it, the running end has been on the inside
Bowline hitch was easiest process
@infeedel7706
Жыл бұрын
Bowline is not actually a hitch, it's a fixed eye but if you look closely you will see the sheet bend. Clever folks would use a half hitch in the tail when tied in kernmantle or marlow type braidlines dues to their inherent slipperiness...
you a og rigger, I respect that
Can i have the pass?
two half hitch?? that`s can`t be a rigging knot!
you mean Deez Knots?
Bight, not bend.
@recklessroges
9 ай бұрын
A bight can be made anywhere in the rope, but when talking about knots in the end of ropes a bend is the correct term when connecting two ropes because you are "bending them together". That's why the knot is called a sheet-bend and not a sheet-bight.
that bowline is way overcomplicated. can be done with 1 whole less step
@recklessroges
9 ай бұрын
Yes, there are faster ways, but the slipknot method is easier for most people to remember.
@Chris90.
9 ай бұрын
@@recklessroges so there's a bowline method called the "Slipknot?" or there's a whole different knot called the slipknot that is more efficient?
I thought that bowline was pronounced "bowlin", as if there was no "e" at the end.
Actually, the double sheet bend is the bend used to bend two lines of different diameter, you also failed when you had both tails finish on the same side making a suicide bend. Second, your square knot is NOT a square knot it was a Reef knot (square knot finishes with tails perpendicular to the lead. Third hitch, this is getting well and truly tiresome: Yep, sure you tied it correctly, but you failed to explain that it needs a half hitch about the lead to lock the clove. The Clove hitch is only used to secure a load and never for releasing a load under tension, they also are well known to shake loose and give way under repeated vibrations and load/unload tension cycles. Lastly, your two half hitches should be used after taking a full turn about the item you are hitching to. This is known as a round turn and two half hitches, this hitch was designed and is used to release under tension whilst maintaining control of the load. The round turn was also understood and known as a "snubber" turn (the round turn about a spar creates friction, which is why the two half hitches were used with the round turn), we used to use these even around shackles which allowed us to lower 4-600 Kg loads on 14mm synthetic kernmantle line. But what would I know from 33 years of rigging in 10 Countries?
@KOLD504
Жыл бұрын
Ok captain tying knots.
@matthewkile8
10 ай бұрын
You'd be a lot cooler if you linked a video demonstrating these points
pronounced (boh-linn)
@recklessroges
9 ай бұрын
Not everywhere. The bowline is ancient and has had many names and pronunciations. There is no one definitive name or pronunciation. In French it's called "the chair knot".