NC Miata (2006 to 2015) - Cipher Steering Wheel - Installation and Review

Автокөліктер мен көлік құралдары

I bought a Cipher Steering Wheel for my NC2 2011 Special Edition PRHT, and am really happy with the result. In this video I show you how to install this steering wheel, and give you a review of my thoughts on it after spending some time driving the car with it installed.
I bought mine from ‪@GoodwinRacing1‬ I'm not being paid to endorse them, I've just been their customer for years, and I've found them to be a reliable source of quality parts for all generations of Miatas.
Cipher Steering Wheel for NC Miata (2006-2015):
www.good-win-racing.com/Mazda...
Questions? Suggestions? EMAIL ME AT: zeke@miatachannel.com

Пікірлер: 40

  • @MD-cs4js
    @MD-cs4js Жыл бұрын

    Always love your videos Zeke, wonderful upgrades.

  • @linkuhndave
    @linkuhndave Жыл бұрын

    Nice quality video. I will be doing the same this week. Mine has the red stitching. It will be a nice upgrade to the interior. Thanks again!

  • @mrman9561

    @mrman9561

    Жыл бұрын

    Make sure you mark the nut so when you take off you can line up and it will match without effecting your tracking

  • @linkuhndave

    @linkuhndave

    Жыл бұрын

    @MR MAN I used painters blue tape, any tape would do. After the air bag is removed, I put a piece from the column to the steering wheel. Then, I sliced it with a sharp knife carefully, not to mar the plastic. Easy to line it back up again.

  • @vlenhoff
    @vlenhoff Жыл бұрын

    I really want one of these for my NC2. Great video, thanks!

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    Thanks! I think it is one of my favorite upgrades on my car.

  • @button-jeff
    @button-jeff2 ай бұрын

    Just installed mine tonight. Followed your video to an absolute T. No issues at all. Haven't even driven yet. Might have to adjust tie rods ever so slightly. We'll see. Thanks for an excellent video. Cheers.

  • @MiataChannel

    @MiataChannel

    2 ай бұрын

    Yeah I had to adjust mine slightly but it's dead on now.

  • @drpiv
    @drpiv Жыл бұрын

    Great video.

  • @pete5534
    @pete5534 Жыл бұрын

    Enjoy the toy! Thanks for the video.

  • @floydsense6133
    @floydsense6133 Жыл бұрын

    I installed the Cipher wheel in my 2014 GT PRHT following the instructions in the video. I don't think I'd have tried it without the video. I ended up with the steering wheel about 10 degrees off. The problem is that the splines in the wheel hub are not in the same rotational position as those on the stock wheel. I corrected the problem by adjusting the tie rod ends. For about a 10 degree correction, 1/4 turn of the tie rods was all that was needed. Making the adjustment without a lift is a challenge, but doable. The Cipher wheel transformed the car and the leather quality is clearly a step above the stock wheel.

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    That's some great advice. I am having an alignment / corner balancing done on my car next week, so I am going to have this corrected then.

  • @mje1625
    @mje1625 Жыл бұрын

    Quite possibly the best Miata install video I have ever watched! Well done, Sir! Quick question, do you think the steering wheel isn't perfectly centered due to an issue with the new steering wheel or when you installed it. Having the wheel off just a hair would drive me crazy! Is this a common problem with this steering wheel? Thanks!

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    Thanks! I think it's something that needs to be corrected in my alignment, I just haven't gotten around to it.

  • @toomars1301
    @toomars1301 Жыл бұрын

    Excellent! Thanks Zeke for another doable upgrade! Curious about the navigation system…??? Both additions look great in the car!

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    This car has a Kenwood Android Auto head, it's actually the one I took out of my 2012, it was installed in it when I bought it. Nice unit, and I run Waze for navigation.

  • @onecleanfinger
    @onecleanfinger Жыл бұрын

    nice job !

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    Thanks!

  • @damianer2195
    @damianer2195 Жыл бұрын

    Such a clear and great explanation! Can’t wait for mine which is exactly the same as yours 😊 Many thanks!

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    I'm glad it was helpful for you!

  • @angelo747
    @angelo747 Жыл бұрын

    You can easily fix that off-set via the tie rod without messing up the alignment. A wheel not centered drives me nuts.

  • @mrman9561
    @mrman9561 Жыл бұрын

    Great video one little tip before you take the steering wheel off mark the nut so that when you lining up the steering wheel you don't need to worry about setting up your tracking

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    Good tip! When I did mine I just made sure the steering wheel was centered before I pulled it off completely, but that is a better way to ensure its straight. I think mine is just because my car needs an alignment to correct that. I am planning on upgrading to coil overs, so I have put than off until I can get them.

  • @mrman9561

    @mrman9561

    Жыл бұрын

    Then its absolutely worth it do then ,I have mine and even though there are few things I want to do ,I want to change the discs coilovers ,stem valves ,new carpet and seat covers maybe due a touch up on the paint will cost but like the idea of keeping something long term

  • @MarioRodriguez-un9ug
    @MarioRodriguez-un9ug Жыл бұрын

    Great video, I will do this soon. Also, what type of pedals do you have installed? Thanks you!

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    Actually, the pedals on my car came with it from the factory. It was part of the 2011 Special Edition package... so they are the OEM Mazda ones.

  • @ericmccolough2482
    @ericmccolough24826 ай бұрын

    Thanks, it's very helpful. Is it a true circle with a flat spot - or is the lower half deformed so as to keep the original lower trim?

  • @MiataChannel

    @MiataChannel

    6 ай бұрын

    As far as I could tell, it matches the dimensions of the stock steering wheel, so I would have to say true circle. The thickness of the grip is considerably thicker than the OEM item.

  • @simonvancoevorden295
    @simonvancoevorden295 Жыл бұрын

    Hello , great video! Nowhere can I find out if the Cypher steering wheel is of smaller diameter than the factory. Have emailed flying Miata , as Goodwin don’t ship to Western Australia & their agent doesn’t have stock of anything! Cheers Simon

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    Its pretty much the same diameter as stock, the grip is just a lot thicker.

  • @FlesHBoX
    @FlesHBoX7 ай бұрын

    I've been eyeing a Guardian Designs wheel, I think I want to go with yellow stitching and 12 o'clock marker. The biggest worry for me is getting it back on straight, lol. It bothers me to no end when the steering wheel isn't straight. I wonder if just using a marker to mark the position on the bolt and wheel would make this easier to get perfect.

  • @MiataChannel

    @MiataChannel

    7 ай бұрын

    I had to adjust the tie rods to center it.. but mine is perfectly centered now.

  • @ethan_59
    @ethan_59 Жыл бұрын

    Hi mate, great video! I am 6'3 with long legs. What do you think the space is like in an MX5 with the seat all the way back and all the way down?

  • @MiataChannel

    @MiataChannel

    Жыл бұрын

    The NC model probably has the most legroom of any generation. I'm 5'9 and still have about 3-4 inches behind my seat when I have it adjusted comfortably.

  • @simonvancoevorden295

    @simonvancoevorden295

    Жыл бұрын

    Hello from Western Australia Another tip from a 6ft3 person . I lowered the clutch pedal by about an inch (just adjust the pushrod under the dash ). You have to adjust the clutch switch also or it brings on an engine light & the cruise control doesn’t work . Cheers Simon

  • @user-iy7bt7qn8q
    @user-iy7bt7qn8q11 ай бұрын

    Did you ever figure out a good way to get the cipher steering wheel aligned? Mine is slightly off as well. Very hard to adjust

  • @MiataChannel

    @MiataChannel

    11 ай бұрын

    I did correct it, yes. When I had my car corner balanced and aligned after the shock install I had them adjust the tie rods to center the steering wheel again. Now it tracks perfect with the steering wheel dead center.

  • @user-iy7bt7qn8q

    @user-iy7bt7qn8q

    11 ай бұрын

    @@MiataChannelthanks for the response! And for the video. Was hoping I wouldn’t need to adjust the tie rods but oh well!

  • @garychiasson4550
    @garychiasson4550Ай бұрын

    What if you have paddle shifters

  • @MiataChannel

    @MiataChannel

    Ай бұрын

    You'd have to remove them and transfer them to a new steering wheel. I don't have an automatic car for reference, so you might have to look for a tutorial on removing them for a better answer.

Келесі