NAVEIN COMBI BOILER NCB 240 ERROR CODE E001 PLUMBING REPAIRS
Тәжірибелік нұсқаулар және стиль
A navien combi NCB-240 boiler shuts down on a error code. Time to figure this one out. Check it out.
kit.co/ChuckBarron/drain-equi...
Subscribe- / chuckbarron
Every day plumbing repairs and installs featured all while my two sons CB2 and Angelo learn the plumbing trade.
Subscribe- / chuckbarron
Follow us on social Media
/ charles.barron.9
/ chuckbarron6
/ chuckbarron6
DISCLAIMER: This video is for entertainment purposes only. This video also contains affiliate links which if you click on link and make a purchase I may receive a small commission. This helps support the channel and helps us continue to bring you new video's like this one. Thank you so much for the support. Plumb on!
Check out some of our gear-chuckbarronplumbing.com/
NAVEIN COMBI BOILER NCB 240 ERROR CODE E001
Пікірлер: 60
The best maintenance tip do not put one of these in your house. They constantly break down all the time between the pump, three-way valve and pressure sensor that always fail. Never had so many problems with units until high-efficiency came out. Cast-iron boilers far superior and will last 2 to 3 times as long as a high efficient boiler and without the headaches.
Thank you for your maintenance tips and this trouble shooting. You made my day. I know how to proceed. You're terrific.
Let me get my phone in case something goes crazy LOL........I love chucks demeanor, coolest plumber ever.
@ChuckBarron
4 жыл бұрын
ya right...another phone save. lol
Great video man. I service and install Navien as well. You did some good work, I use my channel lock pliers backwards also when they don't fight the right way.
Nice! We don’t have many radiant heating systems here in NC but we install Navien tankless water heaters all the time.
@ChuckBarron
4 жыл бұрын
one good thing of living in cold weather area at least. So additional services we can do.
The big flathead slot on the front of the pump behind the yellow sticker.inside the unit..turn that to bleed the air out..turn it left but not all the way out..youll hear the air comeing out..once it spits water consistently your good...probably had an air gap and pump had nothing to pump.so it overheated..good videos.
@ChuckBarron
4 жыл бұрын
Thanks sir...
For low torque jobs you should try a Milwalkee M12™ 1/4" Hex Screwdriver. Lot lighter and can manuver in tighter spaces.
@ChuckBarron
4 жыл бұрын
Charles I was just in a bike shop and the guy had one....on my to get list now. thanks
I was wondering if the expansion tank was bad. I noticed once the boiler was coming up to temp the pressure getting really close to 30. I think 27.2 was the last in video. I’ve had a few of these go through a lot of expansion tanks. On a few ended up being the Ph was way off. Luckily Navien is awesome and while the homeowner had to pay to filter the water. They came through and supplied a new boiler. Definitely check the Ph on unit if expansion keeps blowing. 😎👍🏻
@ChuckBarron
3 жыл бұрын
Great point! They did not have one.
@ChuckBarron
3 жыл бұрын
True story....piped like regular boiler. insane.
I dont do tankless, thanks for the good training you provided, man that was brutle. wife pointed out that you should let your beard grow
@ChuckBarron
4 жыл бұрын
thanks A. and no beard for me...ha.
Would you install an expansion tank on a tankless water heater with a pressure reducing valve on the main line?
@ChuckBarron
4 жыл бұрын
No sir.
What is the purpose of the boiler having it's own internal heating system water feed if there is also another feed directly into the system from the pressure reducing valve? Wouldn't these 2 feeds basically do the same thing? With all of those electronics in that boiler it might not be a bad idea to have it plugged into a surge protector too.
@ChuckBarron
4 жыл бұрын
combi requires feed for heat loop and for boiler.
Too bad they don't make that case a bit bigger and make layout a bit easier. Good video Chuck!
@ChuckBarron
4 жыл бұрын
just a bit larger be nice.
@throttlebottle5906
4 жыл бұрын
they'd rather you call tech support 900 times, not be able to service it, then have 3+ other companies and top technicians called, then end up replacing it anyway.after some magical month's long, (warranty is voided) circle-jerk-fudge-fest, whilst you and home freezes and/or cannot shower :))) yet they wonder why some of us are so salty and want to get rid of them all...... from the top down ;)
@TrippKnightly
3 ай бұрын
Or maybe access panels on the side like the panels on the back of laundry machines.
Just a question. Why not change the pump head. 4 screws. Easy ? Not a criticism .
@ChuckBarron
3 жыл бұрын
i rather entire pump be changed out.
That big yellow snake is in your way haha that's one lazy way to leave the gas line. I hope you can tidy that up in the future. I've been saying it for ages about the magnetic filter and everyone kept saying there was no need because its copper base board. And the pumps are steel etc and the Components in the boiler are so fine they can easily block up. In Ireland and the uk you will not see a gas combi or system boiler without one. Magnetic filters have a massive market here.
@ChuckBarron
4 жыл бұрын
Martin, magnets all in for me now. The yellow snake to be captured when filter installed. ha.
@Martin-pr6ps
4 жыл бұрын
@@ChuckBarron good work chuck
@ChuckBarron
4 жыл бұрын
Thanks Martin
@ptech88
Жыл бұрын
Thats very illegal in MA.
@Martin-pr6ps
Жыл бұрын
@@ptech88 why?
Air scoop looks to be sandwiched pretty tight in there.
@ChuckBarron
Жыл бұрын
Righty tighty on that one
I had the same error code. unit reached 200*. purged the unit and the internal pump drain valve. changed a dhw blown expansion tank. took 10 min. to purge air and ran fine. opened a bathroom faucet and air blew out hard-the real problem- slow leak on the dhw supply line above drywall ceiling. Thanks for the tips could not find an error code 001
@ChuckBarron
9 ай бұрын
mind melt some times.
Love how everything with these units are designed to be repaired by people with a three year olds hands... maybe I'll be blessed with acrodysostosis to make the repair go swimmingly...
@ChuckBarron
4 жыл бұрын
i know right. lol
Those tees are too far apart are they not?
@ChuckBarron
4 жыл бұрын
they were good. ended up being a bad expansion tank. blowing off relief valve and losing purge on main loop that caused pump to go. thats my thinking.
Error code 353 - thought I fixed it by "purging" draining the hot water relief valve. it worked got hot water. Error code went away but now it is now back on? Happy to pay you or some else a fee via Paypal - for a Facetime or other video chat?
instead of repairing them, everyone needs to start shipping whole broken units to some execs driveway/lawn, a full 53' dump trailer or multiple at once should get the point across. lol, I hate to be so crude about it, but that is exactly what needs to happen or perhaps the corporate offices nice mountains of trash machines piled high in front of the doors or all the parking entrance/exits ;)..............................
@ChuckBarron
4 жыл бұрын
Thats Error Code F***
@TrippKnightly
3 ай бұрын
Cheaper way: email them a pic of every repair. Or perhaps an online graffiti wall for all to see.
There is a lot wrong with that installation, I would recommend a full repipe.
@Martin-pr6ps
4 жыл бұрын
I'm thinking the very same. Very lazy work.
@ChuckBarron
4 жыл бұрын
Ya gonna service this baby and get er right for the folks. all while doing a magnetic filter in next week or so.
@ChuckBarron
4 жыл бұрын
Tweek to come for sure on this baby.
28.6 pressure
@ChuckBarron
3 жыл бұрын
alert!
I hate tell this but.. Plumbing is simple needs to be kept simple. Tanked water heater / gas or electric very reliable. Don't want to sell a product I don't believe in as of now tankless sucks...
@ChuckBarron
4 жыл бұрын
No way BC..they are super.
smack the pump with a wrench or small hammer..... probably stuck from air(oyxgen/sludge/rust). then go about testing the boiler water, PH balance/other levels likely miles off and eating the system inside out. city water/well water/etc. means nothing overall
@ChuckBarron
4 жыл бұрын
magnetic filters recommended on all systems now. anything thats has iron.....pump, flanges, air scoop....GREAT! LOL
@throttlebottle5906
4 жыл бұрын
@@ChuckBarron what about a house full of large cast iron radiators lol
@ChuckBarron
4 жыл бұрын
just add one to each rad on feed and return...lol
I’m the eight years we’ve had this furnace we’ve had to have it serviced about ten or more times. It is JUNK! Do not buy it.
Right back in your funny, these systems are junk