MyIntent Maker Tammy Nelson - how to create simple adjustable sliding knot bracelet
Тәжірибелік нұсқаулар және стиль
This video shows how to attach and tie cord to make a simple adjustable sliding knot MyIntent bracelet.
You'll need:
- Scissors
- Lighter
- Two 13" pieces of cord (I use polyester)
- One 7" piece of cord
- MyIntent token
Find more helpful resources from MyIntent Maker Tammy Nelson here: key2bme.com/myintent/MakerTammyNelson/Tips
Пікірлер: 114
Thank you so much. Your slip knot explanation is by far the easiest to follow...
I always looking for a video (and I search this😅)"how to do sliding knot using 2 string with a ring in middle. So funny right? haha... Finally I found this video. Thank you!🌸
You are such a good teacher. You work slowly and explain clearly. Thank you
I still use this video 3 years after ive seen it lol, in my "useful skills" playlist
This was so simple with great instructions! This was my first bracelet, so I am very happy that I was able to follow the instructions:) Thank you!
Best video ever! Thank you!
like a lot of the others here, I wanna say THANK-YOU so much for this easy-to-follow and well-explained video. Now I need a video for the twist style.
Just used this video to fix a bracelet I bought for my boyfriend! Thank you for your help!!! This was a great 🥳🥳
This is by far the easiest way I've seen to make a sliding knot. Wow, thanks for sharing.
@TammyNelson3
5 жыл бұрын
So glad it was helpful!!
Thank you for helping me make affordable parent gifts with my middle school students.
Awesome. The best tutorial on the sliding knot. Thank you for sharing 😊
Thank you SO MUCH for this. I just made my very first bracelet to give to someone and your instructions for the knots Was just what I needed. I was an anxious mess through the whole thing but you really helped me. Thank you.;
Thank you for your times to show us, thank you!
Oh my...thank you. I had to improvise but in the end it worked. Thank you. 😊
Good tutorial. Better than most I’ve seen. Thank you
@tammynelson1547
5 жыл бұрын
The Clay House thanks so much for your kind words!
Thank you so much for sharing. This has been the easiest for me to follow and I’ve watched a lot
@andreja6486
4 жыл бұрын
I agree!
Great tutorial, I've been searching and searching for a video with this knot that's easy to understand
This was so helpful!! My bracelet is functioning again. I appreciate you! Keep rising ☀️
@TammyNelson3
6 жыл бұрын
Anna Palmer - so glad it was helpful!! 😊
Very helpful tips 👍🏽👍🏽
Thank you for showing the end product first. Many do not!!
Thank you very much for this tutorial!!!
Thank you. I will make some bracelets
TY so much for this video! I was looking for EXACTLY this!
I'm going to do this with my happy planner disc and add small beads. Thank you so much for this.
@tammynelson1547
4 жыл бұрын
You're welcome! What a great idea!
Thank you. This was perfect.
@tammynelson1547
4 жыл бұрын
Glad it was useful! :)
Thank you !!!!! I really love this tutorial very easy to follow 😊
@TammyNelson3
4 жыл бұрын
Gladys H you bet! So glad it was helpful!
Thank you so much, it's a great tutorial!💗
At last I found the right video , made 4 bracelets . Thank you , so easy👏😊
Very helpful! Thx!
Thank You, this was great to follow along
@tammynelson1547
4 жыл бұрын
You bet! Glad it was helpful!
Go to 2:42 for just the sliding knot instructions... And Tammy, THANK YOU!!!
Thank you Just what i was looking for
You're the best queen 👑
Very helpful! Thank you
Yaaaay I did it!!!! 🪢 Tysm ♥️👏
Awesome ty for sharing this tutorial
Thank You!
Thank you
That was incredibly helpful! Thank you!!! I’ve been searching for videos to make these knots for over a year and yours was the easiest to follow and clear instructions. Thanks so much!!!
Definitely easier than the tutorial posted on the MyIntent Website! Thanks!
@TammyNelson3
5 жыл бұрын
Michcella Tiscornia so glad it was helpful! :)
thank you this is exactly what I was looking for
@TammyNelson3
5 жыл бұрын
cathi johnson yay! So glad it was helpful! :)
I use a craf hobby heat knife. It cuts through and fuses. I use it for paracord bracelets as well. I did a similar slip knot. After watching your video I remembered one of my scout knots for whipping the ends of a rope and came up with a slightly different method. Instead of wrapping away from the loop I wrapped towards it rather than the “tail”. Still pulled through the loop and cut and fused ends
@Jeanne1125
2 жыл бұрын
I've done it this way also, as it's what I learned first. Any idea what I'm doing wrong though as I play with the bracelet, it seems to pull that string thru the hoop back out. :-( I appreciate your time.
@Vicktorious
2 жыл бұрын
@@Jeanne1125 Sure I would we need to see what you’re doing to see what’s happening but I also know that when I use the craft knife or I use those ones where you can seal the end of threads I also always play it a little flat on the side to flatten it out to kind of seal it in a way
thank you! my string from a washer bracelet i ordered online is starting to fall apart now the washer won’t go to waste!
very clear and helpful..thanks
@TammyNelson3
5 жыл бұрын
anna c glad it was useful! ❤️
That’s simply
Thank you for this. What size cord is it ?
Great video, could you tell me how long my cord should be for a necklace 😃
I always wondered how to make that knot... Thnk you
@TammyNelson3
5 жыл бұрын
SUPERMANHMD72 you’re welcome! 😃
🤗👍 ❣️
How do you make the round ones?
wow 111 comments here now.. thanks thats easy one..
Thank you! Where did you get your polyester cord from?
@TammyNelson3
6 жыл бұрын
Who's Emely? I buy it from MyIntent.org
Did you use the nylon or polyester from MyIntent?
@tammynelson1547
4 жыл бұрын
Laura Ellingboe I used the waxed polyester.
Hi, I used this technique and no issue. This year almost all the bracelets I have made fall apart. I believe I am following the instructions completely. I ordered new string from myintent. Any advice? I make the loop, wrap around, put the string through the loop, then pull. Then it falls apart! This never happened last year!
@Jeanne1125
2 жыл бұрын
I'm having this issue also. When I pull on the ends of the bracelet to make sure it stays put...it doesn't. EEK. What did you do to rectify the problem?
Hi tammy. My bracelet gets loose around the token. No matter how many tomes i tighten it. Any suggestions. Should i dab a bit of glue?
@tammynelson2979
5 жыл бұрын
Hmmm...do you use the cord from MyIntent.org?
@pchaplin8158
5 жыл бұрын
Yes, I use the cord from Myintent.
@jenniferlosey1064
5 жыл бұрын
Oh, I forgot to add dont use the nozzle on the bottle. Unscrew the cap and use a toothpick to apply the glue. You wont get too much that way.
@misstiscornia7058
5 жыл бұрын
I have the same issue! I use the wax polyester string from the website, and I heat it up a bit - not quite as hot as sealing a knot - and that seems to help the issue.
Where do you get the yarn at
I used washers instead of the ring
Where did you get your lighter from?
@TammyNelson3
5 жыл бұрын
Mary Wong just from Kroger. :)
what size and type cord you used?
Interesting that you finish off by just going through the one loop and not taking the end through all the wraps of the sliding knot. I'll have to try it this way.
@Jeanne1125
2 жыл бұрын
What do you mean? Maybe this is what I need to do. Mine seem to come undone after going thru the loop.
Would 13 inches still be sufficient if these bracelets were being made for people who are plus size?
I tried and still cant do it. Thank you for your helpful tutorial but i am not gifted at this lol. I’ll keep buying my bracelets i guess
@tammynelson1547
4 жыл бұрын
It does take a little bit to get the hang of it! Truth is, I buy most of mine pre-made, too!
Wow thanks gee whiz
@TammyNelson3
5 жыл бұрын
Dasha Vura you’re very welcome!
Yay
Great video, thank you. The sound was very low tho.
When I do the 7" tie around, thru the hoop and pull, when I pull the knots of the bracelets, my 7" starts to come out. Any idea why?? Anyone?? I need help. Making for gifts for women fighting breast cancer and the last thing they need to worry about is a sliding knot coming undone! 🙂I appreciate the help!
What kind of chord is this?
What kind/size cord do you use?
@TammyNelson3
5 жыл бұрын
Tina Butterfield I buy my cord from MyIntent.org
WHAT TYPE & SIZE CORD IS THIS?
It did not look like you pulled your loop end through the wrap, which would hide it and then, cut both ends close and work them to inside the wrap, with just a bit of a twisting motion on each end to keep the tension even, then dab on a very little bit of e6000 or super glue.?and it is permanently secure, I just do not like that loop end showing above the wrap, it looks unstable to me even though it probably is ok, either way!🥴😊
How many inches do you recommend if I’m making for a child
Can you do this with leather?
@TammyNelson3
5 жыл бұрын
I'm not sure as I haven't tried it with leather. Sorry!
@brietoujours1343
5 жыл бұрын
Tammy Nelson I tried it with leather and it was a bit bulky but works the same.
@TammyNelson3
5 жыл бұрын
Brie Toujours oh awesome!! Thanks for sharing your results!
@brietoujours1343
5 жыл бұрын
Tammy Nelson you're welcome.
@Jeanne1125
2 жыл бұрын
Yes! I made one for my daughter and it's still holding strong. Seems stronger than the nylon I'm using. UGH.
Is there an email address where I can contact you with a question about this bracelet? Thanks!
@TammyNelson3
6 жыл бұрын
P Oprisko hi there! Sure - tammy@hoipolloitrends.com
Do you know how to make this bracelette with 2 or 3 washers without punching holes into the washers....just using knots?
@TammyNelson3
5 жыл бұрын
Sorry but I do not know how to do that.
Didn't hear about needing the 7 inch piece until I'd already cut the freaking leather. 😢
Knots
Yes from some dollar store. Loose .
Token? Its a washer.
@tammynelson1547
4 жыл бұрын
You could use a washer but the tokens MyIntent manufactures are made to effectively take the stamping (not too hard, not too soft) and come in many nice finishes unlike hardware washers.
@michael7324
4 жыл бұрын
@@tammynelson1547 oh, ok. Thank you for clearing that up. Great video.