Finally, a worthy “building x in y minutes” video

@zaynepelayo5806

3 жыл бұрын

especially since it's a z

@amirulasyraffishak9647

3 жыл бұрын

@@zaynepelayo5806 thats a good pun haha

@bobbyk5557

2 жыл бұрын

Worthy? Wacky build and bad driving. My chicks bolt on Hr on a 100 shot runs 11.60's at 119mph.

@emm_zr0674

2 жыл бұрын

I was also trying to do a vq37 swap on my g35 how complicated/simple was the swap?

Bro said “first mod: destroy the environment” 😂😂😂🔥🔥

So simple and so effective. This the type of content car enthusiasts need!

beautiful build dude, keep up the hard work and you will get that 10 sec pass!!

@boostedprojectz

3 жыл бұрын

Thanks appreciate it. We getting that 10 second soon!

One of the most cleanest z I’ve ever seen good job bro you’ll get that 10 seconds soon🔥

Hey man im really proud of your build, very optimistic and good minded work. Good job man

Dude upgraded and changed his 350z so much you can't even remember what the first one was like

I enjoyed watching your Boost journey here.

Loved to see the progress. Much love and respect to you from a fellow DIY Z owner.

@boostedprojectz

3 жыл бұрын

Appreciate it!

Im probably new at this...but this is the first rear mount set up for boost ive heard of. Never knew it was a thing

@nazaky4715

3 жыл бұрын

Same due i was like wtf happens if turbo hits the ground

@palexnismo5836

2 жыл бұрын

you could put your turbo inside your cabin if you are brave enough

@t.s.8236

2 жыл бұрын

it is pretty common for 350z and 370z to have a rear turbo

@sarchavius1111

2 жыл бұрын

The engine bay is super cramped on Z's. Hence the top mount turbo setup not having a hood. With the muffler removed there is a lot of room in the back for a turbo setup. Just make sure not to have any boost leaks and it will work great.

This was a really good Building vid tbh!

Love the build dude 🤘🏼

wow! nice work!! gratz bro!

Great Video! I really like the way you structured it. I'm still driving my 03 Z. I want to get the rocket bunny body kit.

I enjoyed this video! Thanks!

Honestly Bro you a savage we wanna see a 4.3L vq for your next set up

Big props, dope build

Nicely done ✅ I’m looking to turbo mine soon!

Very nice! I really wish I could dump stupid money in my 08. Its worthy of some love

Dude you'll easily get to your goal with that setup 👌

And I’m just happy with my FBO 350z DE running 12s 😩😭

As long as you know what your doing. Its going to be done!👌🔥

@andresmontoya9

3 жыл бұрын

It’s common for Zs as we have no space in the engine bay unless you’re going to cut a hole in your hood or rock it without one haha

Drive safe my guy ❤️

This was a great video man! I love my Z but I couldn't turbo it lol

Best work !!!

I appreciate the persistence. But this for sure showed me that I need to spend money on building the engine the first time. Lol.

AZ boys 🤝 I really wanna turbo my g37 sedan this year smh. I already know what turbo I want but I guess it’s time to learn to boost a car 😤

really cool video i have a boosted and bagged hr. i wished i could see your tunes graphs lol

Sounds like some power shifting will get you in the tens. I can sip my coffee between your shifts brother...

I love it, but you're spending a good amount of time with shifting, maybe a sequential gearbox? It sounds sick btw! 🤘🏻

I'm new in the car scene and was looking for set ups for my z I got a 06 love the z I wanna make mine like your tbh

Cool build man! Could you talk me through the engine process? You had a 35HR and then simply swapped in a 37VHR?

That car is a menace wtf

Man that 11 minute video felt like 22 minutes . Cool car .

So BOSS So Cool 😎

sick build vid i woulda liked some description of the parts you added since im new to cars but none the less fire

@imp9ct239

3 жыл бұрын

supper fire

That's wasup man..!!!!👊🏾👊🏾

top mount hood exit hrs sound the best and you also lose alot of that back pressure and boost lag from the reer mount

Insane

really nice build how much wqas the nitrous kit ?

Question, where did you learn how to mod your car? I'm wanting to get a 350 or 370.

LS3 , with a supercharger , belt driven , single 93mm , just another radiator / heat exchanger in front , small pump , 6-700HP , all day and nite , lnngtube headers , true dual exhaust , center exit , set the engine back about 5-6” , lower it some , lose the spare tire , move battery to trunk , , no cats , racing seats , should get you there below 10’

I have an hr G35s so was the vhr bottom end not really worth it?

I was hoping you put letters under every mod but it don’t matter good vid

Nice project

@boostedprojectz

3 жыл бұрын

Thanks appreciate it

What was the drag time after the vq37hr swap? Did you use just the bottom half? What was the compression ratio? I have seen guys making goods power on a stock engine. Spun bearing twice? You must be doing something wrong.

Does it flood there? How does the turbo hold up with flooding or puddles ect if at all?

If you don’t mind me asking, how much were all of the upgrades you did?

Hey man you do turbo kits with gabe right? I just dropped him off my 08 350z for the vq37hr swap with cams and a mid mount 😁🔥

What components of the engine to u upgrade when installing a turbo

How does the suspensions components look now too

How much do you have into the build so far?

What all did you have to change out for the hr swap

it that thing even road legal still looking sick tho

Dude just for reference, how much money have you spent in the upgrades?

damn nice build unfortunate about all the spun bearings... thats something im trying to avoid rn on my vqde

Why do they do rear mount turbos again? I read about before and forgot

I love the build and i just don't know y u did the top turbo

Congratulations I admire your persistence and for sure you will get 1/4 in10 seconds, God Bless You!

Music killed me brother man

Amazing build. Was it the oil gallery gasket that caused the spun bearing - or heat from the high compression??

@URBANENGINEER

2 жыл бұрын

He never swapped to low compression pistons during all of this 🤣. I saw 12 psi on a stock 35HR block 💀!

Great build. We know where your stimmy checks went...bhahaha...JK...great build and great video. Keep updating. Thank you

Ok so I got the inspiration now where can I find the money and know how

full mod list?

I fw the build but bro aren’t u worried ab water gettting in ur intake and turbo being under the car

Is it jus me or have i sern this guy in phx az

how much money did u spend ?? buy the end ???

As an hr owner myself this is why I don't boost any of my cars. Too many problems... I'll just keep it fbo n/a. Not the fastest thing around but at least it sounds nice and I won't be on the side of the street or freeway because of broken parts lol. Nice built though, the orange looked better than the white color imo

amazing build man, hard to believe you could put all that boosrt and nitrous into the system without any forged internals. Just curious, how did you like the rear mount turbo system? I have considered wanting to do that to a car im getting but im leaning towards no because of the lag time and its prone to water and debris, also you cant hear it as good? What do you think, have these ever been a problem for you with the rear mount turbo? Thanks!

@boostedprojectz

2 жыл бұрын

Thanks. I enjoyed the rear mount turbo setup. They work just as any other turbo setup. I never really had any issues with the rear mount kit. As for the lag its a more noticeable then a top mount but if you brake boost or use antilag you wont notice any lag.

@carminecarlone2869

2 жыл бұрын

@@boostedprojectz okay awesome thanks for all the good info!

Props on the work put into the car but those engines sound annoying even boosted lol

how much money did you invested?

You might not respond but maybe could I get a mod list I'm sorry if it's to much to ask I wanna make my z like yours I'm new in the car scene I got a 06 z

Spun bearing twice on an engine capable of 600whp? Turbo has a lot of lag. It is reaching full boost at 5000rpm. Not an issue for drag racing though.

how much you pay for the z stock

Hey man can u email me pictures of how u rand your hot and cold piping please think ima run the same kinda top mount set up like it alottttt lol thanks in advance bro

Goals

What mods do you recommend in order to prepare for boost w/ minimum issue?

@boostedprojectz

3 жыл бұрын

Besides the turbo kit itself, you need to upgrade yourself fuel system, bigger injectors, bigger fuel pump, and a fuel return system if you want to make good power. I would recommend doing your gallery gaskets if you plan to run the stock block. That just something that will prevent issues later on.

7:50 whats that rear bumper?

Why ditch the solar orange tho😢

excuse me sir what do you do for a living?

Sick build bro , do you have any idea how much power it’s making?

@boostedprojectz

3 жыл бұрын

I havent dynoed it but it probably around mid to high 500s

@mmmhowbowfoqyew

3 жыл бұрын

@@boostedprojectz nah you gotta be touching 6xx on a boosted 3.7 bro. 93 or corn?

Why did you throw a bearing twice? How could of this been prevented?

@URBANENGINEER

2 жыл бұрын

Oil cooling issue. Larger oil pan and shorter change interval.

Seems like the stock VQ35HR lasted longer that both of the built bottom ends

@sirkrow7118

3 жыл бұрын

I’m not an expert on the vqs but to what I’ve understood, once you turbo them you really need to get a tune otherwise you’ll eventually fuck something up. On both the engines he had that he blew he didn’t say anything about getting it tuned, and after he put the hr in and got it tuned he didn’t spin another bearing. So I’m guessing that’s what caused it

Is the VQ37 swamp harder than the LS swap? I haven’t seen many VQ37 swaps Nice build!

@boostedprojectz

3 жыл бұрын

It isnt hard at all. You just take a 3.7 shortblock and put the HR heads. Its way easier then doing an ls swap

Love the car can you please let me know what year it is much appreciated It

@boostedprojectz

3 жыл бұрын

Its a 2007.

I want a Z so fucking bad like more that anything in this world

Fast and furious fuck boi right here holy shit! Nos is your 1st mod holleeeeee this is hilarious

@boostedprojectz

2 жыл бұрын

I can tell who the fast and furious fuck boi is here by the guy calling nitrous NOS 😂

@RoaRingmutZ

2 жыл бұрын

@@boostedprojectz its called an abbreviation buddy but you are American so I can understand you don't know what that means

9:24 holy shit that sounds like a murcielego

I prefer the vq35 than the vq37

Why a turbo behind a car?

Any idea on why u kept spinning bearings ?

@boostedprojectz

3 жыл бұрын

We have come to believe its was caused by high oil temps. Both time it happen after doing several back to back pulls. First time i didnt even have an oil cooler. I live arizona it gets really hot here

lol 5 days after pop top mount turbo tune spun bearing :(

Wow much money much

Lots of redundancy in a few areas you could have saved some money. Always do research from top to bottom and triple check it before you spin money on the same thing or area multiple times. From car guy to car guy. -2013 G37S 6speed sedan-

@boostedprojectz

3 жыл бұрын

Everything i have done on it has improved the car nothing has been done without research. I've spent less money on this build then most other ppl do on builds like mine. I've done all the work on it myself. You been a car guy know when you work on your own car you save a lot of money.

@crossacoustics6814

3 жыл бұрын

@@boostedprojectz Good job. All our projects are exactly that - PROJECTS. The fact that you are doing some of the work yourself helps SO MUCH. I am not very mechanical - I have an 04 Z (DE) that I’m building and the money and time that it is taking is not whats important. I appreciate your journey & your car is awesome. I just put a 60k mile motor in mine and bought a preowned ProCharger. Hoping for the best results I can get on the path I’m on. I’ll be happy with 450whp and no breakdowns $ :)

Rear mount the turbo you will get your 10 second pass

Bone stoke *sees two intakes*

U kept ur 350z hr heads n put them on the vq37 block

@boostedprojectz

3 жыл бұрын

Yes on the vq37hr. Its the 3.7 short block with hr heads

Make sure you got a mod plate so the cops don’t fuck you over

should gut the entire interior make it weigh way lighter should help with times

@boostedprojectz

3 жыл бұрын

I will gut it if i cant get it to do a 10 second pass with full interior.

Oh damn are you in Az?

@boostedprojectz

3 жыл бұрын

Yes i am