Thank you very much man. Got a 1986 spree from my uncle and I was going half insane trying to figure out why it was dying after giving it gas. I'm not very good with cars or scooters but watching this made it so easy to follow along and now it runs like it's supposed to. Thanks again!

I love your vids!!!🤣🤣🤣 Nothing beats making it all work. A Spree was my scooter growing up as a kid. Im glad you guys found one in good shape. 🇺🇸👍🏼

Thanks man. I inherited a 1985 Honda spree from my uncle, but it hasn't been started in a couple years. Same situation. So this is really helpful to get her up and running. Thank you and wish me luck!

@RollingWrench

3 жыл бұрын

Sweeet! Enjoy that sucker!!

I love this type of video and plus the way you explain is very helpful.

@RollingWrench

3 жыл бұрын

Sweeet! Thanks for the feedback :-)

you are the best teacher in terms of scooter motorcycles

Great video, thanks!

Always entertaining to watch

I got a free one from the side of the road with only 2k miles, it cranks but the carburetor is not functioning correctly and the starter scratches after multiple tries (almost seems like the engine is building too much pressure) any tips? I’m gonna follow this video to clean my carb but I’m not sure if my starter needs work, it looks like it was just loose and not fully inserted into the starter motor but I’m no mechanic (it’s my first project). Hahaha idk if I’ll get any response but loved this video thought I’d ask

Awesome video! I did the rebuild but when i start my scooter, it fires up and revs up extremely high (like its full throttle). The throttle feels like it is working.

@jimmy1life

2 жыл бұрын

Twist cap off make sure you put it on correct needle through hole. Just guessing bunch little things there

awesome exactly what i needed drain old gas carb clean and im cruising lol on 85 just hit 700 miles. I am little confused on the air screw guess im guessing almost 2 turns out?

@RollingWrench

2 жыл бұрын

Watch my how to tune a carburetor video

@jimmy1life

2 жыл бұрын

@@RollingWrench shoot ok didn't know will look into thanks 👍😊

my honda aero wont start. I cleaned the carburetor, replaced it with a new one, cleaned the intake valve and reeds, replaced cylinder cover gasket and cylinder body gasket. No idea what else to do to get it to start? How do you test connectivity on the choke harness connection? Thank you

Good day I hope you can do an upgrade tutorial for Honda vario 150 cc this scooter is mainly sell in asian countries

I have removed my fuel pump and put an inline shutoff valve. Will that work

I just finished restoring a 1990 Elite E (SB50P), and I've sonic cleaned the carb, and have cleaned it with carb cleaner twice, The Pilot jet keeps clogging on me; I've cleaned all the tanks, replaced the fuel line, cleaned the fuel filter; I'm about to clean the carb for a third time, and replace every frickin' line that I haven't yet (save for the oil line). I'm told the Jet is a press fit, and the only way to properly clean it is to remove the pilot jet. Any advice? It's gotten to where half the time I need to unplug the bystarter to keep it running so I can get home because the pilot circuit clogs up again. Oh, and I'm running Klotz 2-stroke injection oil, the snowmobile stuff, which is a little better than the scooter stuff they make; It's easier for me to get locally. as for fuel, I run 91 octane premium fuel with zero ethanol.

Skillz to pay the bills. :-)

I know this is off topic, but if you made a video about removing an engine block from a ruckus safely would be helpful. In my humble opinion.

my co-worke Ron Aragon has the same Red One But his Is Very Smokey and Hard to Start and the muffler and Tailpipe is very Brown And Rusty

Oh snap!!!! Go rolling wrench!

Make sure the carb spacer isn’t upside down. It’s not symmetrical .will cause vacuum leak. Cheers

I low-key want to see somebody swapped a Honda Grom ignition ( efi, throttle body and etc )onto a Honda Spree or a Honda Elite LOL that be nice

Seen your short video on that led speedo/tach/info unit. Small black one. Where is the full video about it and where can I buy one Thank you

@RollingWrench

3 жыл бұрын

www.rollingwrenchdenver.com/products/mini-instrument-gauge-motogadget-motoscope

Sir lods always watching you. Pls teach me! How to faster my chinees scooter.. im from philipines

Yo bro I hope your going to be on live tonight I need my scooter fix tonight

@RollingWrench

3 жыл бұрын

I’m going live!!! Soon

Do you no a replacement carby for my Honda lead nh 125 cc

If i change the main jet for the winter do i have to tweak any of the other parts of the carburetor ?

@RollingWrench

Жыл бұрын

Normally yes

Just used this video to start up a Spree that's been sitting for a few years. Same issue, would start with some carb cleaner in the intake but promptly die. Cleaned the carb, purrs like new! Much appreciated for the tutorial 🙏

Fun video. Why are you premixing oil and gas?

@RollingWrench

Жыл бұрын

It’s a a 2T with a removed pump. I can’t trust a old oil pump

@qfdforme

Жыл бұрын

@@RollingWrench Understood.

Hey can u give me any guidance I just changed the ignition key to a ruckus but the bike is on(electricity) no matter which position the key is in? The ignition key had been tampered with.

@RollingWrench

3 жыл бұрын

Sounds like the ignition plug is wired wrong ???

@anikitwoeight7623

3 жыл бұрын

@@RollingWrench which two prongs in back of the switch should the connector be touching the red/green is on the first one and red/blue on the 3rd( last one to the right). Thank u again for the response

Brother I bought a $%☆!¡ daixi zhenhua 50 cc trike madd dogg. Start but doesn't stay on, horrible vibrations at 22mph no where smooth as your trike was on the video, and now I see smoke coming out of the exhaust. .. when you can PLEASE make a video on trike, frame alignment are off as well... bad buy, too good to be true smh bit i have it and like to enjoy it !

Hey I wanted to ask do you know where I can find the reed valve for the spree?

@HypersleepParralax

3 жыл бұрын

Inside the intake manifold

i have a question probably silly , i have a 50cc 2 stoke gy6, and wondering if it can be changed someway to make it run a 4 stroke bore kit ? any info would be amazing

@noneshere

3 жыл бұрын

Nope...not many 2 strokes have timing chains , camshafts, rocker arms, or overhead spring valves. 2 strokes are way easier to rebuild then 4 strokes. Best you can possibly do is a whole engine swap. ... I would just buy a complete used broke down gy6 scooter for cheap & rebuild it yourself. Stock gy6 parts are super cheap. Or Consider rebuilding your 2 stroke. They are super easy.

@TheRangaKing1991

3 жыл бұрын

@@noneshere was more on the roll of just putting some oil around the crank and running it 2 stroke fuel through the one fuel line to keep it going , in theory it should work just how long is any ones guess,

Question would you sell that spree ? I’m seriously interested in it I want to dio swap it and have it as a daily

@RollingWrench

Жыл бұрын

My wife said hell no lol. Alt yew had a dude e-mail us. He has 2 mint ones $1500 a pop

Wazzup bro much love from Philippines

@RollingWrench

3 жыл бұрын

What uppp!

@Advince24

3 жыл бұрын

@@RollingWrench yahoo im fine idol keep safe always

Did u take off your Oil reservoir. And just mix the gas

@RollingWrench

2 жыл бұрын

Ya :-)

@Timcrowe407

2 жыл бұрын

@@RollingWrench can you jus take it off or do you have to do any thing else

1985 to spree.. my fish bike wow... Did you sale to me!!!!

Can you do a video and what's in your toolbox

@RollingWrench

3 жыл бұрын

That would be a cool one. Ya

Put a hinda dio motor with 2 A B crank with 4.1 gears with 72cc bore kit with a CT manifold and boseyen Reeds and a 28 o.k.o carburetor on the spree and it will fly

@HypersleepParralax

3 жыл бұрын

Get a better carb than oko

@doane58

3 жыл бұрын

@@HypersleepParralax or kehein

Good evening.

Sup bro!!

Why are you mixing oil and fuel? It has an oil tank.

@RollingWrench

2 жыл бұрын

Oil pump is removed. So now we premix

Both

Ruckus

Make it run

Teaser

Lol😂👍