If only we had micro center, or anything like it in norway 😒

@ZackFreedman

2 жыл бұрын

Real-life electronic stores are a dying breed…

@vratk0529

2 жыл бұрын

Or in Slovakia

@misterzod

2 жыл бұрын

Or canada

@eduardog3000

2 жыл бұрын

It's ok, most of the US doesn't have it either 😔

@tosust

2 жыл бұрын

Same

HE DID IT, HE'S FINALLY BEEN NOTICED!

I don’t use bath bombs in my bath, I use them in combat

@themadlad_

2 жыл бұрын

I just use toasters in my bath

@wsketchy

2 жыл бұрын

@@themadlad_ in combination with bath salt

@themadlad_

2 жыл бұрын

@@wsketchy yee

@HAli7

2 жыл бұрын

@@wsketchy and with thermal paste

5 milliverges. am ded. Also, build looks incredible Zack!

@ZackFreedman

2 жыл бұрын

Thanks! It was a lot of fun to make, and it’s made my hacking way more productive.

@sixty502

2 жыл бұрын

100% the best part of the video

@relt_

2 жыл бұрын

@@ZackFreedman zack, please make a tf2 sentry using only texas instruments chips and parts

@blackmambo2526

2 жыл бұрын

Hi

@TOWGyt

2 жыл бұрын

ded inded

There's a reason I don't use water cooling. I don't trust myself enough to take care of my PC let alone build it properly. Don't worry, my PSU might not be mounted in my 10 dollar case but it works just the same.

@olik136

2 жыл бұрын

same- there is no real reason for water cooling as long as you don't intend to overclock your CPU or GPU.

@monad_tcp

2 жыл бұрын

@@olik136 depending on the size of the heat sink you get, you don't even need to user water cooling, even with a bit of dynamic overclock like 15%

@monad_tcp

2 жыл бұрын

to be fair, his coolant was conductive, if you get an non-conductive coolant, that won't happen even if it leaks

@ionstorm66

2 жыл бұрын

@@monad_tcp the don't stay non conductive for long.

@carlangelo653

2 жыл бұрын

​@@monad_tcp They don't stay non conductive for very long, they're about as effective as Distilled water. I had a fitting leak after a pretty sizable earthquake hit while I was away from home. My "non-conductive" 5 month old fluid still screwed up almost everything it touched. My rule of thumb has always been, if you need it to be low maintenance, durable and reliable. Don't use water/liquid cooling.

LMFAO "PULLED A MICHEAL REEVES" this guys a genius

@kadusalles

2 жыл бұрын

HAHAHAHAHAH

@europhil2000

2 жыл бұрын

damn, I missed it! when is it?

@sodiumhydrocarbonate4707

2 жыл бұрын

@@europhil2000 4:38

@TANUJDARGAN

2 жыл бұрын

@@europhil2000 4:50

@europhil2000

2 жыл бұрын

​@@sodiumhydrocarbonate4707 & @Tanuj Dargan Thanks! I love his scripting! There is always some stuff that just gets me. Wonder how much time he puts in this. If he comes up with these just like this or if he actually spends hundreds of hours coming up with these...

"I bought them to mine crypto whenever the apartment in new york got cold." holy shit i'm dead.

@darksunrise957

2 жыл бұрын

Fun fact, because of thermodynamics, a GPU giving off heat by mining is exactly as efficient as running a space-heater for the same temperature. Weird, right?

@ExEBoss

2 жыл бұрын

@@darksunrise957 The difference is that, given enough time, a GPU mining crypto eventually pays for itself.

@UNSCPILOT

2 жыл бұрын

@@ExEBoss assuming said crypto didn't devalue into the floor thanks to a industrial scale crypto mine

@CockatooDude

2 жыл бұрын

@@UNSCPILOT Gotta mine decent coins. Can't be out here mining shitcoins.

@SuperSmashDolls

2 жыл бұрын

For non-NYCers: NYC apartments never get cold; even in the dead of winter you will be swelteringly hot unless you open all the windows. This is actually legally mandated. New York City wanted to stop the spread of Spanish Flu and their idea was to force people to keep the windows open for ventilation.

"My brain is so wrinkly it's like a pug." This sentence is now collectivised. Thank you comrade.

3:08 “Rizzen”

@billyjo9127

2 жыл бұрын

He has Rizzen.

@Realistixz

2 жыл бұрын

just about to comment that

FINALLY SPONSORED BY THE ONE AND ONLY also thank fuck the GPUs survived, even with prices dropping imagine having to buy new ones now

I too also bought a giant block of black foam that comes with a free CPU

Viewer: How many pop culture references can you put into video? Zach: Yes.

@RKroese

2 жыл бұрын

Zombie comment

This guy is awesome. He's resourceful, smart, a great problem solver, and to top it all off, he watches Futurama.

@UNSCPILOT

2 жыл бұрын

And "the Last Airbender", I can't miss that reference XD

The day has finally come. Just as we were wondering if Micro Center is deaf and hadn't heard the call.

I can really recommend getting a temperature sensor to have inline with the watercooling loop, i have set my fan speeds dependent on water temperature. Great way to make sure your new tubes don't deform ;)

Every time I see Micro center featured on a tech or 3d channel my heart aches as no such heaven exists in my country.

So I found your channel earlier today and have now binged nearly every video. In one day I have gone from someone with no mechanical knowledge and thought that 3d printing peaked at D&D minis, to someone who wants to control a drone feeding live video to my glasses(I wanna say monocle but i think you need more room for hardware) and controlling it with a glove. Thanks man. I may never have free time again. xD

@raphaelmorgan2307

Жыл бұрын

my ADHD ass will forget he exists for a while and then when reminded I'll watch all of his videos that I've missed and be disappointed when I run out 😭like a favorite show fr

When the Ryzen processors start to acend, 3:14

@DeadpoolPlayz

2 жыл бұрын

Yeah i laughed when he said "risen". Its whatever tho

@thisguy1890

2 жыл бұрын

Mmm pie.

@Altirix_

2 жыл бұрын

really threw me off when he said risen

The guy who said the fans were too loud must feel bad right now...

He's been noticed by Senpai, congrats! Also the jokes and references per minute were so fucking high I had to take a breath

Bro when ever my dev project fails I come here for a revamp of my soul. Love your videos, script witty jokes, and your tinkering. Also surprised your not at a billion subs. Much love.

props for Geoxor in the background

Congratulations on the sponsorship! I love the humor. Awesome build.

as someone who failed college, built his own rig with liquid cooling. damn this is heartfelt. I love the literal wallpaper on the screens lmao. I also worked at microcenter, shit sucks to work for because you get paid .06% off of stupid shit like cables and .01% off of anything above 100$

@barretprivateer8768

2 жыл бұрын

I can tell you failed college from how you punctuate text. I hate to break it to you but assembling PCs is not really difficult at all. 'As someone who failed college but ties his shoes himself' Like, good for you.

@FAB1150

2 жыл бұрын

@@barretprivateer8768 here we have mister aerospace engineer

@Jellylazer

2 жыл бұрын

@@barretprivateer8768 you're a cool guy

@Orlandofurioso95

2 жыл бұрын

@@Jellylazer This here, people, is proof that you don't need college to be a decent human being.

@ihazabike

2 жыл бұрын

@@barretprivateer8768 Who sh*t in you're Cheerios this morning? We all gotta start somewhere, no shame in his game.

Congrats on the MicroCenter sponsorship! New rig looks awesome and the writing in your video, as usual, is amazing!

"Dry as ben shapiro's wife" holy shit I burst out laughing

@theprogram863

2 жыл бұрын

Is ridiculing people's wives really where we are now?

@Zwettekop

2 жыл бұрын

@@theprogram863 I think it's more a shot at Ben Shapiro with his cringe commentary. No one actually thinks anything's wrong with the wife.

@salty3953

2 жыл бұрын

I like watching this guy but the sly jokes thrown at republicans and conservatives are annoying. Politics are just annoying in general

@theprogram863

2 жыл бұрын

@@Zwettekop My point stands. If someone started saying shit about Zack's wife to hurt him because he said something they think is cringe, would that be ok? If you think some type of nasty attack is wrong, except when it's someone you hate because politics*, then you're saying the attack itself isn't wrong, just the target. Plus, salty is right, why are we even arguing about politicians on a maker channel in the first place? Does the world really need more hate right now? * or in this case, a family member of someone you hate because politics

@theprogram863

2 жыл бұрын

@@Zwettekop tl;dr: Observe Wheaton's Law.

You are a comedy god, and I am so happy I found this channel. Sorry for the loss, but happy to see the rebound. Love the build!

You and your wife have fantastic content. Love those positive vibes.

Protip: Silicone tubing resists heat amazingly well. The crap you get in PC shops, not so much...

The Shapiro quip really got me.

Ergibleds got me every dang time. Props for committing to it. Nice build - good tips. Congrats on the new machine, even if it wasn't entirely by choice.

happy for you man. got the sponser you always wanted. excellent pc build too.

Several Avatar Last Air Bender references! Love it.

"As dry as Ben Shapiro's wife" Fudge man I love you.

@JimboCBer

2 жыл бұрын

I'm still laughing at that hours later.

@lincolnaitken

2 жыл бұрын

This is the best one-liner, only the real ones know what he's referencing

@peterharrell7305

2 жыл бұрын

@@lincolnaitken shoulda made the Steve shives getting cucked and divorced raped joke, woulda actually been funny...

@EMOTIONOGRAPHY

2 жыл бұрын

@@peterharrell7305 stay mad

@EMOTIONOGRAPHY

2 жыл бұрын

@@tynj4173 did you know she's a doctor?

Very nice! Micro Center Rocks! Thanks for sharing.

Great video. You took you're time and it shows.

"My Brain is so wrinkly, it's like a pug" Sir, I died.

Love this

great build, love your style

Congrats on 200k!

Sharp distaste of Ben Shapiro lmao I swear this is like the second time I've heard a razor sharp jab. Also the script was extra tight lol wtf you just keep getting better

Good old Noctua...I just wish they didn’t specialize in hideous color schemes...

Nice work Zach, you are my favorite cybernetic organism!

MicroCenter!!! Your mecca! Congrats buddy. That build is a work of art!

He finally got sponsored by microcenter!

where did u even get that flask lmfao

@ZackFreedman

2 жыл бұрын

It’s a regular flask, I’m just really short

Yaaaas!! So glad microcenter sponsored you. Love that store! Maybe I’ll see you in there!

Please keep these videos coming!

2:23 Intel vs AMD through the years be like

I died when he said "...until it's as dry as Ben Shapiro's wife." Now I have to subscribe. lol

HE DID IT!!!!!! I'M SO PROUD YOU GOT THE MICRO CENTER SPONSORSHIP!!!!!!!!!!!!

Thank you for the Micro Center links. I am going to try to build my first pc.

This is pretty much the entire reason I don't trust myself enough to use liquid cooling. That and I'm broke.

"...until it's as dry as Ben Shapiro's wife." Dude, you just earned a *SUBSCRIBE* and *BELL* from me with THAT quote alone.

Your jokes are hilarious. Also, 200k subs! Congrats!

This is so good. My love of MicroCenter is only strengthened by seeing them sponsor the greatest KZread channel.

"as dry as Ben Shapiro's wife" xD funniest thing i have heard all week xD

oof mate, at least the most expensive and/or important parts are ok.

I'm so sorry to hear about your loss

Not watching your videos for 3 months, it's nice to see the confidence you've acquired since then :)

"Dryer than Ben Shapiro's wife" Best line I've heard all week

"dry as Ben Shapiro's wife" *dead* *subscribed*

I CALLED IT! I knew you would get big one day. I was here since before 1k. You deserve all of it

Awesome rig and well presented. Entertaining as always, Zack! Thanks for sharing! Also, now I have an earworm...

So happy you got the Micro Centers sponsorship. You guys earned it

one of the most intresting builds ive seen in years , great channel i like yer style . and some interesting tips like those gpu brackets never seen any pc builder mention them before

@ZackFreedman

2 жыл бұрын

Yeah, I don't know why either! These cards were sagging really bad before, and if this $7 bracket can save a $300 motherboard AND make my build look neater, it seems like pure upside

I've been researching my first 3d printer and wow stumbled across this chan which is like a hundred lifetimes of 3d print knowledge all in one. Thanks for all the effort you put in. 3d printers aside, i've been watercooling PCs for yonkages, it is the way. Recently started flurting with Halea aquarium chillers - picked up the bottom range HC150 wow so much better than radiators my rig is like 20c water temp in a 20c ambient room with GPU and CPU sitting at 50 full load. It's a bit noisy so planning on eventually drilling holes in the wall and plumbing it into the next room for a totally silent supercooled PC.

Loving the bender reference!

I like that you showed you going to micro center cuz that's the way I go too and it's cool

As a person that spends 5 days a week at a Microcenter its awesome to see they sponsored your channel! It feels like a perfect match!

Damn, ngl this video was on point! You weren't lying yesterday.

I love your witty comments man

I really like the focus on finishing projects, that is something that has prevented me from starting a lot of ideas (that and these so called jobs) and most creators don't talk about the struggle to finish something when your role model (my dad) got old and stopped finishing projects of their own

I will never build one of these, but I had a blast watching. Thanks!

Hell yeah, the Lian Li PC-O11 D is such a sweet case. Love mine too

I can't believe I took so long to find your content it's so well directed

Very good PC build. You did your homework and know what you're doing.

i really like how you did the tubing , neat how it goes sideways unlike other builds ive seen

You're living the dream zack!

Gawd I love this guy's sense of humor xD

you are living the dream! thank you for fitting so many mini jokes into your videos, i am always chuckling the whole time haha

Awesome video dude! I remember when you had something like 12,000 subs and look at you now. Best of luck, you clean-cut cyborgian creator.

I have almost the exact same build! Good choice! Now get back to the crazy gadgets! lol

XOX your patter, sorry for your loss. Patronage model FTW!

The taped on paper desktops on the screens gave me a good chuckle

Seriously one of the most entertaining youtube commentaries out there

I went to that exact microcenter recently. was my first trip to a microcenter and was really cool. bought a new monitor while I was there

Mad Co grats on getting sponsered. Im sure microcenter is pleased. Great Video!

“I got them to mine cryptic when the apartment got cold” lmfao

Cant wait to get this guy 1 million❤️

I have the same exact CPU/Motherboard combo!

I've been to that Microcenter several times. Nice.

YESSSSS! Micro Center sponsor! Congratulations man. 'Bout time they noticed

Grats on the sponsorship!

I saw you driving down I-25 and thought waaait... Then I saw the Denver MicroCenter and thought WAAAIT... Greetings from Castle Rock! Love the content, keep it up!

yo, I love that micro center I go to it all the time

Man, I drool over this PC

lmao at the monitor graphics. congrats on 200k 🥳

You are hilarious! I so want to trex to the Mecca Center with you.

I have been watercooling for years now. Many different iterations and builds. Have used PETG, and Acrylic, but now I am a ZMT man. I usually swap parts every 6 months or so, and breaking down a fully acrylic build takes quite awhile. I eventually got fed up with it and now I'm using ZMT tubing w/ quick disconnects. I can break down my build and change a part in a fraction of the time.