My NEW FoxAlien Masuter Pro CNC Machine! The Basics you NEED to get you going!
Ойын-сауық
I believe I found my new favorite tool for the workshop!!! If your planning on getting into CNCing, I highly recommend this machine!
Check out FoxAlien using my Affiliate Link Here:
www.foxalien.com?sca_ref=3491064.Cgy97aKmUB
OR
Buy FoxAlien CNC Masuter Pro on Amazon here:
amzn.to/41XVVAK
Buy Your CNC Bits on Amazon Here:
amzn.to/3kTqjv9
Buy Your Collets on Amazon here:
amzn.to/3KWO4NC
Buy Your Calipers on Amazon Here:
amzn.to/46hRl1h
Note:
As an Amazon Associate, I earn from qualifying purchases.
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
www.Kalinds.Life
Check out this link!
linktr.ee/kalindslife
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: KalindsLife@gmail.com
Instagram: @KalindsLife
Discord: discord.gg/9dCxPEMtXY
*********************************************************************
Filmed On: GoPro 9 w/ Media Mod
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#foxalien #cncmachine #cnc
Пікірлер: 129
I know nothing about CNC so this really puts me at ease. Big thanks from the Gold Coast, Australia!
@TheCrawlspaceCraftsman
7 ай бұрын
Awesome!! Just dive in! I did!
Ditch the glue and tape and get some XFasten double side tape. Throw the metal clamps away. Tape your spoil board down, mine has never come loose. Putting the trim router in is a game changer.
@TheCrawlspaceCraftsman
Жыл бұрын
WoW! I checked out Xfasten and appreciate the tip!!! Added to my list of things to buy! TY!!! I did enlarge my spoil board and ditched the clamps! Thanks for the tip and watching!
@Riless42
4 ай бұрын
Xfasten is what I use. I’m surprised more KZreadrs aren’t talking about it. No residue, a secure hold, and not that expensive, a little goes a long ways.
@Doc.Marten123
3 ай бұрын
@Riless42 hi is it the XFasten woodworking tape you use? I've been a few different versions of XFasten double sided tape, but I assume its the Woodworking one you use?
That is really awesome! Thanks for sharing this project with us!
@TheCrawlspaceCraftsman
Жыл бұрын
Absolutely!!! Many more videos using this to come! If you have any ideas…. Send them my way!
@foxalien_official
Жыл бұрын
@@TheCrawlspaceCraftsman Guitar or skateboard building withe the 4080 extension kit will be cool!
Thank you so, so much for making this video. It makes this beginner process so much easier and less stressful because there is SO much information out there. Your video is more helpful than you could ever know!
@TheCrawlspaceCraftsman
Жыл бұрын
Super glad it helped out. More to come!!!
@elizabeththrockmorton9318
9 ай бұрын
@@TheCrawlspaceCraftsman I am settled inwith my machine and have made several things with the bits that you recommended, but now I'm wanting to experiment with a v-pocket bit and am running into issues with jscut. I'm using jscut to convert my svg to gcode. What program do you use to do that?
@TheCrawlspaceCraftsman
9 ай бұрын
@@elizabeththrockmorton9318 I would use Easel by Inventibles. It’s an online program and super easy to use!
@elizabeththrockmorton9318
9 ай бұрын
@@TheCrawlspaceCraftsman Oh! I guess I thought that was just to replace Candle. Do you do all the steps from design to execution in Easel?
@TheCrawlspaceCraftsman
9 ай бұрын
@@elizabeththrockmorton9318 i do yes. I haven’t dived into many other programs. Easel works well for me and my needs. I do pay for the pro program too. Yes it’s $24/month but I don’t have many other things I pay for monthly so it’s worth it for me.
That's a pretty cool tool! I wasn't sure about it until you put it on the belt sander. It came out really clean. That was awesome!
@TheCrawlspaceCraftsman
Жыл бұрын
That’s totally because of the wood I was using I believe. When I use a solid wood…. It’s perfect!!! Im good to make more videos with it and show that VERY soon so stay tuned!
@ThatHobby
Жыл бұрын
@@TheCrawlspaceCraftsman I like that belt sander too. I am adding both of those tools to my wish list! Great stuff! I can't wait to see some more videos.
@Alex-rf1md
Жыл бұрын
@@TheCrawlspaceCraftsman a downcut spiral flute could possibly eliminate all those "burrs shavings" from the top by pushing the cut material instead of pulling it over the edge.
I am a pro at cnc programing and operating on 500k+$ machines in a shop but I dont know where to start my hobby cnc router in my basement, your videos are great!!
@TheCrawlspaceCraftsman
Жыл бұрын
Thanks a lot! Appreciate that!!!
Plywood is fine to use. The problem is that you didn't use a sprial downcut bit. Most of the cheap bits out there are upcut bits and they tear out wood like crazy.
@TheCrawlspaceCraftsman
Жыл бұрын
I’ve leaned quick the direction of the cut determines the tear out. Even though this was a test….. down cut would be the way to go especially on ply. Thanks for watching!!!
@TheCrawlspaceCraftsman
Жыл бұрын
I’d rather blow out the bottom of the wood (the part you don’t see usually) than then top.
great vid, i learned alot, im thinking about getting that fox but with the laser too, did you get the laser also?
@TheCrawlspaceCraftsman
Жыл бұрын
Not yet! Tomorrow I’ll be doing a video on the Offline Controller and then soon another awesome upgrade! I plan on getting the laser as well…. I hope!!!
Nice Bucees hat!
@TheCrawlspaceCraftsman
5 ай бұрын
LoL. Purchased at Bucees in Florida on I-95 Daytona!
This video is great we have the same cnc ( two weeks ) and I have being using the trial version of easel. Question…. I During set up I see the mouser pro which option did you choose. I have been able to get a design done but it came out smaller than the size I input. I was wondering if the machine I choose might be the problem.
@TheCrawlspaceCraftsman
9 ай бұрын
That weird. I’m not sure why your output would be smaller honestly. Shouldn’t have anything to do with Machine name.
Thanks for the video! What wood would you suggest to avoid having to sand it?
@TheCrawlspaceCraftsman
10 ай бұрын
Hi there! I think there’s always going to be a bit of sanding involved especially after a project is completed no matter what kind of wood you use. But to answer your question line would be the best to start with as it’s soft and easy to work with. Lowes sells nice 3/4” pine panels that’s a good place to start. Thanks for watching!!!
I got my Masuter pro yesterday, building up as this is playing in the background lol keen to see how it goes
@TheCrawlspaceCraftsman
Жыл бұрын
Let’s Gooooo!!! How did the build go!!
Dope video bro. Thanks for sharing, quick question , can the table hold a 1.5” piece of material or would that be too big?
@TheCrawlspaceCraftsman
Жыл бұрын
Thanks so much! It can cut about 15” x 15” and easy hold 2” thick. I don’t think it could cut through 2” though only because you’d need a long bit and I don’t believe it will raise that high. But def can cut through 1” yes.
Where's the link for the Etsy shop? I'm curious about the end products.
@TheCrawlspaceCraftsman
3 күн бұрын
Heya Scott! I’ve really put that off for a little while but plan on adding to by August. If you go the my link.tree in the comments there is a link there.
thank yuo for the video, but im facing an issue with depth cut , it doesnt cut all the way , i configured the thickness of the material and i set the bit into top corner of stock surface
@TheCrawlspaceCraftsman
5 ай бұрын
Have you made sure you Z-prove is set correctly? Also what program are you using ? Easel? You can email me or message me on FB messenger if you’d like!
@TechExplainedArabia
5 ай бұрын
@@TheCrawlspaceCraftsman yes I have Z prob I’m using easel and tool path created from fusion 360
I use double sided tape all the time it's brilliant. You literally just made some.
@TheCrawlspaceCraftsman
6 ай бұрын
I have to try this…. amzn.to/48ilyi6
Thank you for activating the subtitles in Spanish, I have a masuter pro and there are no videos in Spanish
@TheCrawlspaceCraftsman
Жыл бұрын
💯!!! Thanks for watching!!!
what size Colette adapter works for the Haber router for use of the 1/8 bits?
@TheCrawlspaceCraftsman
3 ай бұрын
E11 collets available on Amazon!
Great video. How long did it take to cut out the mickey head? Thanks
Do any of the Fox Allien machines come with software? Also how loud is the rougher? What do you think is the best software? If you could only buy one machine for a beginner, what would it be?
@TheCrawlspaceCraftsman
6 ай бұрын
They do provide a free software but it’s not that great. I don’t use it. I personally use Easel for all my needs. I’m not a pro in all the available software out there so I would research more for your budget and needs for sure. I absolutely love the Masuter Pro for a beginner. It’s super easy to build and really easy to operate. I would invest in the extension kit right away for a larger work area. 31x16 oppose to 16x16 (rounded up).
Newbie here, great video. I’m wondering how loud it gets.
@TheCrawlspaceCraftsman
10 күн бұрын
It’s the spindle that’s loud. The stock 70w spindle literally sounds like an RC car at full speed. If you upgrade the spindle to a palm router… well… that’s a different story. Hope that helps gauge the sound a little.
Try a downcut type cutter. (or a compression type) You're welcome lol
@TheCrawlspaceCraftsman
Жыл бұрын
LoL. Ok! TY!! Can you explain why just for my and others info. 😊
@xyzspec82
Жыл бұрын
@@TheCrawlspaceCraftsman I know I'm late... I suggested this, so that it leaves a clean cut on top (no sanding required)
@TheCrawlspaceCraftsman
Жыл бұрын
@@xyzspec82 I purchase a downcut bit and can’t wait to see the difference!!!
Is this machine good enough to do inlay work with small letters and numbers ? Thumbs up on the video, Thanks
@TheCrawlspaceCraftsman
Жыл бұрын
Inlays are tricky things! I have done Male / Female Bow tie inlays with it but never small letters and numbers. I’m in a group called Foxalien CNC Router & Laser Machine Group where i saw a guy doing some intricate inlay work on cutting boards. Short answer is Yes. It takes some practice but I don’t see why not! And thanks for watching! 80w laser video coming in a couple weeks!
link to harbor freight vid with whatever you were going to attach?
@TheCrawlspaceCraftsman
11 ай бұрын
Upgrading my FoxAlien Masuter Pro with a Harbor Freight Bauer Router! kzread.info/dash/bejne/maKOq9puiaqvesY.html Thanks for watching!!!
I havent seen anyone engrave acrylic. Can it take on that material??? whats your guess?
@TheCrawlspaceCraftsman
2 ай бұрын
Yes! You need to watch your bit speeds as it will get hot and could melt the acrylic and bind up on the bit!!
@sistemas_jr
2 ай бұрын
@@TheCrawlspaceCraftsman thank you for your response! 👍 Learned a los from your videos. o have one more subscriber here. Have a great day!
hihihi can the machine works with vcarve program? greetings from Chile
@TheCrawlspaceCraftsman
10 күн бұрын
It will work with VCarve! Thanks for watching!
Thank you so much for this videos, new subscriber for sure and I will check out your content. Hopefully you can help me, what bits do I need to carve on concrete? Thanks in advance.
@TheCrawlspaceCraftsman
3 ай бұрын
Oh wow! That’s awesome! I havnt done any carving on concrete but I would say you need diamond tip bits, very slow and shallow passes as well as keeping your concrete sprayed with water. Its will be very dusty and you wont want to breathe that in so a mask while in the shop would be a good idea too! Concrete dust in the lungs is not a good thing!
@TheCrawlspaceCraftsman
3 ай бұрын
amzn.to/3v7xhlB
@leozacic
3 ай бұрын
@@TheCrawlspaceCraftsman Awesome, thank you. I will give these a try.
Etsy link? Would like to check it out what you can make with the fox alien.
@TheCrawlspaceCraftsman
8 ай бұрын
www.etsy.com/shop/BarnAndBlossoms
Hi, how can i use my mac os with this cnc machine.
@TheCrawlspaceCraftsman
7 ай бұрын
Your best starter program to use is Easel by inventables. It’s on online based program and super easy to use. The Pro version is $24/month but it’s worth it for a few months until yon get used to how the CNC works. I actually pay for it and use it for a tax right off business expense.
Lol I want one to make spraypaint stencils
@TheCrawlspaceCraftsman
4 ай бұрын
It could work but maybe a Cricut or Plotter would be better for that.
@user-jt5vm3mi1w
4 ай бұрын
@@TheCrawlspaceCraftsmanOk I will look
I just bought the same cnc machine. I can not get easel to recognize it through usb connection. Did you have that problem? can you please help?
@TheCrawlspaceCraftsman
13 күн бұрын
Did you twist the emergency stop bottom after setup?
@paul_hartsel24
13 күн бұрын
@@TheCrawlspaceCraftsman I did not know about that little trick. I would be trying that when I get home tonight.
@TheCrawlspaceCraftsman
13 күн бұрын
+@paul_hartsel24 yup! They come usually pressed in. Try that!
@paul_hartsel24
12 күн бұрын
@@TheCrawlspaceCraftsman it works thanks so much
@TheCrawlspaceCraftsman
12 күн бұрын
@@paul_hartsel24 was that the issue??? Glad to hear your up and running either way!
Is there a free program that you can run this cnc with? If so what would you recommend?Thanks in advance!!
@TheCrawlspaceCraftsman
10 ай бұрын
Easel online has a free version that is good to start with. I even recommend the Pro version even if you only use for a couple months until you get things figured out. There are others out there as well but Easel is great!
@Hillbillyoutdoors38
10 ай бұрын
@@TheCrawlspaceCraftsman thank you very much!!!
Hello sir. I want your advice.. am planning to start a business.. do you advice to use cnc router for engraving on acrylic .. example ( engraving photos.. logos.. ets) And thnx again
@TheCrawlspaceCraftsman
Жыл бұрын
100%!!! Using a CNC will drastically reduce your production time and increase quality!! I love my FoxAlien and think you would too!!! I’ll be doing a live stream next weekend building one so come by and say hello!
@mohammadrawshdeh7579
Жыл бұрын
@@TheCrawlspaceCraftsman thnx for replying.. does the photo quality will be clear as the co2 laser or less ?
Can you use Vectrix with this machine?
@TheCrawlspaceCraftsman
3 ай бұрын
I believe yes although I do not use it personally.
Mine doesnt cut all the way through the wood and it is so frusterating! Im not understanding why?
@TheCrawlspaceCraftsman
3 ай бұрын
Could be a number of things. Did you set the actual thickness of wood. Use calipers to be exact in MM.
@madebyshaypie
3 ай бұрын
I did yes, only cutting halfway through. I will have to do some troubleshooting. Thanks for the reply!@TheCrawlspaceCraftsman
Just FYI, the link for the calipers is not correct.
@TheCrawlspaceCraftsman
9 ай бұрын
Wow! Dang! Thanks for letting me know! I updated the links! I’ll have to check other videos later! Thank you! 🙏
If you had used a down cut bit you would have had much less tear out on plywood
@TheCrawlspaceCraftsman
6 ай бұрын
Downcuts definitely are good for plywood! I don’t cut ply much but you’re def correct! Thanks for watching!!!
How deep can you cut with that CNC?
@TheCrawlspaceCraftsman
Жыл бұрын
So you can cut as deep as the end mill is long. I have bits that are 1” long. That’s about the max I would do with this machine. You can fit media as thick as 2.5”.
I don't know if you still read these or not, but here goes. When you decided to switch from the 1/8" to 1/16" bit to get all the detail, couldn't you have started with the 1/8" to hog out the majority and then step down to the 1/16" to finish it?
@TheCrawlspaceCraftsman
3 ай бұрын
I do read these still!! LoL. Absolutely yes. I’m impatient sometimes and don’t do two bits! LoL
@TheCrawlspaceCraftsman
3 ай бұрын
(Like I should!!!)
Is the cutting super loud??
@TheCrawlspaceCraftsman
7 ай бұрын
So the 60w spindle is not very loud but if you add the Palm Router it’s much louder. I have a closed insulated workshop so you can barely hear it outside. I can’t speak to the 400w spindle (yet) 🤫🫢😉. stay tuned!!!
Use a down cut blade.
@TheCrawlspaceCraftsman
2 ай бұрын
Love me some down cut bits!
@omgthisnamewasfree2076
2 ай бұрын
I was going to ask about this, I've just set my machine up, can't wait to start using it! Guessing this was done with an up cut bit?
Have you tried laser cutting with your CnC machine?
@TheCrawlspaceCraftsman
Жыл бұрын
Not yet!!! I really need to add a Laser!!!
Seriously? 1/4 inch bit on that small spindle.. Lots fo chatter I would guess. Upgrade to the Makitka... Lot stronger, only thing is the weight and the flex.. 😉
@TheCrawlspaceCraftsman
Жыл бұрын
Upgrading my FoxAlien Masuter Pro with a Harbor Freight Bauer Router! kzread.info/dash/bejne/maKOq9puiaqvesY.html
Hate to point out the obvious but double sided tape would be simpler
@TheCrawlspaceCraftsman
8 ай бұрын
They do make a double sided tape but it’s $17 roll! Don’t use carpet tape… leaves a nasty sticky residue. Thanks for watching!
man that thing looks a lot smaller that i thought it would
@TheCrawlspaceCraftsman
9 ай бұрын
The base has a 15.75”x15.75” cutting area. With extension kit it expands to 31”
ATTENTION: it does NOT work like any other accelerator
@TheCrawlspaceCraftsman
Жыл бұрын
I stand by my comment. Don’t waste your money on accelerator. Using alcohol helps evaporate h2o causing the super glue to dry faster than without. When CNCing we use a ton of tape and glue. It doesn’t make sense for one to by $12 for 2oz of glue. I’ll keep buying my $1.49 glue and surely keep recommending my process because it works… the video showed that. Thanks for watching!
Yea pay someone monthly money for free programs. 😅😅😂😂😂
@TheCrawlspaceCraftsman
Жыл бұрын
I’m not a fan of the fee but there are some pretty cool upsides to the Pro version of Easel. Only my opinion.
@TheCrawlspaceCraftsman
Жыл бұрын
I could think of worse ways to spend $25 bucks (and better) LoL
AHAHHAAHAHAHH CNC WITH WELLS ? ONLY DUMPS ....
@TheCrawlspaceCraftsman
11 ай бұрын
I have no clue what any of this means! 🤔
So I have to buy a computer? I run a cnc lathe for metal at work. I want to do it as a hobby at home but I have no idea what Im getting into. Any additional advice?? Please
@TheCrawlspaceCraftsman
9 ай бұрын
I would highly recommend a laptop but it doesn’t have to be expensive! Also Windows over Mac but I use Mac because I’m just so used to it!
Why you spend to much time talking nothing about the product. Look that machine cost 100 box period.
@TheCrawlspaceCraftsman
Жыл бұрын
🫡