The absolute best thing you can do to keep hands warm while riding… is……. Go to Harbor Freight and get a box of latex gloves.. you don’t need the thick ones… 9 mil or even 7 mil they are too thick anyway…. Get the 5 mil gloves they should be not too tight.. you want a little bit of slack,,, and then get yourself a pair of riding gloves…. No water or wind will hit. Your gloves can get wet and still ok…. Trust me…. It’s absolutely perfect.. you’ll wonder how you didn’t know about this years ago

I just picked up my lowrider st . I had a 2021 lowrider s and traded it in for a streetglide special. I knew has soon as I pulled out of dealership that I had made a huge mistake! I even called dealer when I got home and told them I made a mistake and could I get it back ,no luck it was sold. When I found out they were releasing lowrider st with 117 , I went and put down deposit. Well it came in and they made me a sweet deal on my streetglide, and w am now back on the bike that fits me and my style of riding. Moral of the story sometimes less is more, trust your gut instinct.

@StephenCruthis-fl5wz

2 ай бұрын

I did the same thing but 2023

Missing my FXLRS! Sold it a few months ago and totally regret it. We had similar upgrades….I remember discovering this channel because of it. Ride safe my brother! 🤘🏻

@TryItWithTim

2 жыл бұрын

Dang man! Well the new 2022 one should be dope if you ever want another one lol. But thank you man, ride safe out there!

I've been thinking of getting a 21 or 22 Lowrider S and stumbled across your video while searching for upgrades. Awesome content bro. 👏 The bike looks amazing.

@TryItWithTim

2 жыл бұрын

Its an amazing bike and you wont be disappointed. Thank you!

Love what you've done. Thanks for sharing man. 👍

I've literally set mine up the same way - thanks for the inspiration!

Dude, I love EVERY THING you did. Thanks for sharing.

@TryItWithTim

8 ай бұрын

Thanks yo!

I love that every upgrade is one of your favorite upgrades haha Just picked up a 2020 FXLRS excited to see where it goes

@TryItWithTim

Жыл бұрын

Lmao I realized that as well. Hell yea man enjoy the process !

I didn't realize you've shown us so much...LOOKS AWESOME!!

@TryItWithTim

2 жыл бұрын

Thank you!

Congratulations, Brada. Nice sled.

Great sound, great bike✌🏻👍🏼

That stealth 2-1 sounds incredible

hello tim my favorite mod was the kit putting the gauges on the handlebar. never knew what my odo and speedo was reading at first. now i can monitor constantly without taking eyes off the road.

@TryItWithTim

2 жыл бұрын

Thanks for the suggestion! It does suck having to take my eyes off the road to glance at my speed and RPM

Great video love the mods and inspiration.

@TryItWithTim

9 ай бұрын

Glad you enjoyed it bro!

Sick man, it's come along quite a bit!

@TryItWithTim

2 жыл бұрын

Thanks bro, shes almost done!

Beautiful bike man!

Like all the upgrades cool 😎

Nice build brother. I dig it ✌️

@TryItWithTim

2 жыл бұрын

Right on bro thank you!

Beautiful Harley 🇺🇸🤘🏻

Love the bike bro, very nicely done!

@TryItWithTim

Жыл бұрын

Thank you brotha!

Good video and great job Bryan. Always great videos bro keep up the good work.

@TryItWithTim

2 жыл бұрын

Thanks brotha! Bryan always comin through !

@mrchalco

2 жыл бұрын

@@TryItWithTim true friends right there. I have a buddy of mine that I though heating and air and home remodeling and he is pretty good with videos pics and recording. He’s gonna be my camera man for my upcoming vids for the Tesla and my road glide. I been watching ur vids since I had my barracuda silver 2020 low rider. Im almost 2 year with you bro

@TryItWithTim

2 жыл бұрын

Indeed man! looking forward to seeing your vids and your point of view. Trust me man your one of the few I know since day 1, Thanks J!

Thanks, great video

Love the bike, Tim!

@TryItWithTim

2 жыл бұрын

Thank you bro!

Awesome looking bike!!!!!

Sounds awesome!

@TryItWithTim

Жыл бұрын

Thank you!

Good stuff bro

What size screws did you use for mounting the saddlebags?

Getting a 2021 FXLRS myself. Will be a nice bike for me to do up.

@TryItWithTim

2 жыл бұрын

Dope yo! Its a really fun bike bro enjoy riding and making it your own!

Usaly don’t comment but very very nicely done, love it.

@TryItWithTim

2 жыл бұрын

Thank you, much appreciated!

What tank pads do you have?

Awesome bike

Hi Tim, how many db loud is the exhaust? Thanks

👍🏽Best harley davidson low rider s😎 safe ride👍🏽✌🏽

@TryItWithTim

Жыл бұрын

Thanks brotha you too!

What is the sissy bar measurements?

You make great and useful videos! Thank you for that. I have a question for you: I suppose your bike does not have that Harley traction control. Do you think you would prefer to have such or have you managed well without? Please elaborate shortly! Thanks

@TryItWithTim

Жыл бұрын

Thank you I appreciate the feedback! Honestly I’ve manage well without, with almost 40k miles on the bike and I just recently rode on some dirt roads and had a great time :)

Very nice. Ur build offers me ideas. Kool channel.

@TryItWithTim

2 жыл бұрын

Thanks bro!

@LifeTrod

2 жыл бұрын

@@TryItWithTim Kool channel bro. Presently rebranding. You're doing a lot of things right with your platform, storyline, edits, value, audiance connection. Keep it up. Maybe we may ride one day lol. Peace bro.

@TryItWithTim

2 жыл бұрын

@@LifeTrod Much appreciated man that keeps me motivated to keep creating! I'll be on the lookout for your vids! Always down to ride as well.

@LifeTrod

2 жыл бұрын

@@TryItWithTim Heck yah!

I was interested in getting the same sissy bar, is there anything different that you have to do while running the leatherpro’s mounts through the strut?

@TryItWithTim

2 жыл бұрын

Not from what I recall it was a straightforward attachment. I think the Leatherpros comes with two sets of bolts. A short set and long set, I used the long ones.

Where did you get those brown tank badges that match the color of your seat?

@TryItWithTim

2 жыл бұрын

Got them at pazomaracing.com Search for Vintage Motorcycle Rubber Gas Tank Knee Pad Light Brown

I love your bike man! Where’d you get those pads on your tanks?

@TryItWithTim

2 жыл бұрын

Thanks yo! They are from pazomaracing.com and heres the description "Vintage Motorcycle Rubber Gas Tank Knee Pad Side Panels Decal Protector 3M Sticker Universal Cafe Racer Harley Honda Uzeal Triumph Yamaha"

Are those tank knee pads? Love them. Where can I get some? I just bought a 2023 FXLRS in the latte-champagne white and the tan ones would look great for me.

@TryItWithTim

Жыл бұрын

Indeed, man they will look super nice on the white! I got them here in the light brown color. www.pazomaracing.com/collections/gas-tank/products/pazoma-vintage-class-style-motorcycle-rubber-gas-fuel-tank-traction-knee-pads-side-panels-decal-sticker-for-harley-honda-suzuki-yamaha?variant=19629243269231

hi , Tim I just ordered an Edward richie sissybar and I also have leatherpros v3 can you tell me which bolts you used to mount your sissybar , the longest bolts or the short ones ? Thank you

@TryItWithTim

2 жыл бұрын

Nice! I used the longer ones

Sharp looking and tailored for your usage case. A+ 10/10

@TryItWithTim

2 жыл бұрын

Thanks brotha! Almost in its final form :)

Any tips on getting that golden color I got a two brothers that I'm working with to get that color

@TryItWithTim

2 жыл бұрын

I have the Raw finish and just ride the crap out of it and don’t clean it lol

🤩

I need that back rest it’s bad ass

@TryItWithTim

2 жыл бұрын

The sissy bar?

One of the best looking low rider S Iv seen.

Hi Dude, nice Video! does it work with the original HD detachable Sissy bar? Nice set up. Kind regards from germany

@TryItWithTim

Жыл бұрын

thank you, and no I do not have the detachable sissy bar

Great video, what size windshield and how tall are you? Look's great!!

@TryItWithTim

2 жыл бұрын

Im 5'9 , windshield is 11 inches in this video. Just recently picked up the 13 inch one. Seems to block more wind but need to get more rides in to see if there helmet buffeting. The 11 inch was good, but I got the vented one which lets some air in.

Everyone always posts videos of cam upgrades by the exhaust. But never of the valve train. Did you get any excessive noise coming from the engine?

@TryItWithTim

2 жыл бұрын

No excessive noise, been running real smooth

Dude that is such a sick bike - basically my dream build.

@TryItWithTim

Жыл бұрын

Thank you bro, have fun with your build!

Tim, how do you handle the California emissions requirements (CARB) with the exhaust set up? Is there any trouble with that, at all? Great video as always, thank you!

@TryItWithTim

2 жыл бұрын

Thanks bro! I have not had any issues with it whatsoever, and the motorcycle doesnt need to have a smog check in CA

@ModelGarage

2 жыл бұрын

@@TryItWithTim Thank you!

Nice setup i just put tab zombies and a torque cam on mines.

@TryItWithTim

2 жыл бұрын

sick yo! feel a good difference in performance?

@GLH1213

2 жыл бұрын

@@TryItWithTim oh yeah performance is excellent now and the sound is definitely a safety plus. if they do not see you they can hear you.

I was thinking of a windshield

What tank grips are those and I love that seat

@TryItWithTim

2 жыл бұрын

Thank you, the grips are from pazoma racing

Traded mine in for a Roadglide boy do I regret that stupid move! Miss my Lowrider S so damn much!

@TryItWithTim

3 ай бұрын

The Roadglide is nice tho! What do you miss about the low rider in comparison to the road glide?

Nice Low Rider S. Question: When you did the performance upgrades (Exhaust System and 472 Cam), did you retune the bike? Presuming yes. Opportunity to tune it on a Dyno? Which tuner did you go with? [re: SE Tuner, V&H Fuelpak FP3, TTS, Powervision, or Thundermax (ECM)]? Any results available? Thanks. Tom M., Hawthorne Ca. '22 FXLRS.

@TryItWithTim

2 жыл бұрын

I did this back in Jun 21'. Dyno was 110hp 122tq tuned at Mickey Cohen performance. Powervision tuner. We should ride sometime

@christianjimenez6163

Жыл бұрын

@@TryItWithTim since you’re in Cali too is your tuner available? I’m getting all my parts soon I’ll be installing mine parts with a friend but he’ll be doing most of the work. I just don’t know where to take it to get tuned

@TryItWithTim

Жыл бұрын

To get the power jet tuner, have it shipped to someone you know outside of cali. The other option is to take it to a professional shop which I would recommend. You can get an autotune with the power jet by inputting all you specs on the website but I dont think its a real accurate tune and had some issues doing it that way.

Hey again, question, how tall is your sissy bar?

Hey brotha, did you get saddlebags and sissy bar that was compatiable together or is it just a detachable sissy bar

@TryItWithTim

Жыл бұрын

Sup bro the sissy bar is essentially detachable and sits right up against the rear fender. The leatherpro saddlebags came with two sets of bolts, short set and a long set. The sissy bar worked with the long set.

Hi! 👋🏼 female rider here! I also have a 2020 low rider s. Got it during the pandemic. And I am looking to upgrade my bike but I’m super scared to touch it. When I did the oil change myself I did what anyone not knowing what to do did, and dropped the wrong fluid. Ended up fixing it myself but have yet to touch it again. Can Brian show me how to be more comfortable with modifying my own bike? I want to get risers and a new exhaust. Your video definitely helped me in the direction I’d love to go with the upgrades!! Thanks

@bcelectricco

2 жыл бұрын

My advice to you is buy a service manual and necessary tools. Sockets, torque wrench etc. If you know anyone that wrenches on their own bikes, ask them if you can assist. You can learn and become more comfortable this way. Or learn from your mistakes and try again. ✌🏽

You have any issues with the stitching and water if the bike gets caught in rain does the seat hold a lot of water?

@TryItWithTim

11 ай бұрын

Nope not at all and I’ve don’t plenty of rain riding and leaving it outside

Hey, did you get a custom taller sissybar? Definitely taller and different than your video on it. What height is the new one? Also, great looking FXLRS!

@TryItWithTim

2 жыл бұрын

Yooo good eyes man! Thats exactly what I did lol. Its taller than the standard height, not sure exactly what the height is. I just sent him a picture of a bike with a similiar height and he made it

@mikeshelafoe

2 жыл бұрын

@@TryItWithTim that’s dope! I’m thinking about doing the same! Definitely looks awesome! Ride safe, fists to the wind brother!

Looks nice idles nice runs unknown. Yea so what tuner did you go with? How did your dyno tuning session to take advantage of the cam & pipes come out? Please don’t tell me you showed people how to do a half ass job. There is a part 2 where you finish the job right?

@bcelectricco

2 жыл бұрын

Dyno was 110hp 122tq tuned at Mickey Cohen performance. Powervision tuner.

@TryItWithTim

2 жыл бұрын

Thank you lol

What size Memphis shade fairing are you running?

@TryItWithTim

Жыл бұрын

13 inch windshield and it’s perfect

How is the seat holding up stop comfortable?

@TryItWithTim

2 жыл бұрын

The seat is great and still looks new after several road trips

hey I have the same kind of setup but the pillion riders seem to have a hard time getting on and off due to the size of the sissy bar any tips ?

@TryItWithTim

Жыл бұрын

Hmm maybe they are used getting in and off other bikes? I usually have my lady get off the side left side just by stepping on the peg and swinging the leg over

@vishwajithbalaji5507

Жыл бұрын

@@TryItWithTim getting on wasn’t that big of an issue but getting off seems difficult for a lot of ppl as they can’t swing their legs due to the sissy bar

Great bike!! I too have a 2020 FLXLRS with the same black & bronze color scheme. I love the bike and ride it as much as I can. I still have a long way to go with the modifications I would like to do. Little by little and I will eventually get there. I do have a little ding/dent on the gas tank which I think those tank knee pads of your would work perfectly to cover it up. Can you tell me where you got them from?

@TryItWithTim

2 ай бұрын

Nice man! yes they are from pazoma racing. www.pazomaracing.com/products/pazoma-vintage-class-style-motorcycle-rubber-gas-fuel-tank-traction-knee-pads-side-panels-decal-sticker-for-harley-honda-suzuki-yamaha?currency=USD&variant=19629243203695&Google%20Shopping&stkn=0ac2fdf1ecfb&gad_source=1&gclid=Cj0KCQjw6uWyBhD1ARIsAIMcADrNFBk6AxZiYp_pouM5lpt1invB5DA_nz99iKZG4NLJQXMkhIhbb4UaAkbrEALw_wcB

@stuartnewall6346

Ай бұрын

@@TryItWithTim Thanks Tim. Did you get the Brown or Light Brown?

@TryItWithTim

Ай бұрын

@@stuartnewall6346 light brown

How the comfort for the passenger part of the seat?

@TryItWithTim

2 жыл бұрын

Havent had to sit on it myself, but my lady loves it. We've been on 500+ mile long road trips on it as well

Love the bike. But you got to clean up that exhaust. Some 3M scouring pads in an up and down motion plus mother's metal polish will bring that exhaust back to life

@TryItWithTim

2 жыл бұрын

Thanks brotha gonna try that out!

I been thinking about getting that exhaust for my 2020 low rider s as well.Same bike but silver just ordered 8” biltwel slanted risers keeping the stock bars though.You recommend that pipe ?? Did you have to tune that baby to ?

@TryItWithTim

2 жыл бұрын

Sounds like a sick setup! I've been loving the exhaust, its on the loud side if thats what your looking for. The bike needed to be tuned after the install, and I got the Dyno Jet Power Vision from fuelmoto.com

@JR-eq3qh

2 жыл бұрын

@@TryItWithTim awsome thanks man thank you for taking the time to get back to me ! Love your bike

@JR-eq3qh

2 жыл бұрын

@@TryItWithTim so I was checking fuelmoto out so I put my info in for my mods and it comes ready to install ??? Looks like it says ones I receive it to let them know so they can send me my map...

@TryItWithTim

2 жыл бұрын

@@JR-eq3qh yessir they send you a pretty decent mapping with the specs you give them. I wouldn’t say it’s the best though. My buddy transferred his mapping to my bike after he got his bike tuned at a shop. That’s what’s cool about the power vision is you can share fuel maps if the set up is the same

@JR-eq3qh

2 жыл бұрын

@@TryItWithTim sounds good man thanks again I’ll look more into it.I ordered the stealth pipe so I am looking for a tune and it’s worth checking out thank you

Do you have an issue with sound decibel with stealth pipe in socal?

@TryItWithTim

2 жыл бұрын

Have not ran into any issues with it. I like that this pipe is kind of low key when your just casually riding and it really wakes up when you give it throttle. I should do a decibel test and see how loud it is

@paulson9616

2 жыл бұрын

@Try It With Tim sounds good

does your bike pull left if you ride with your hands off the bars?

@TryItWithTim

Жыл бұрын

Yep! I believe its normal and I balance it out by loading the right tourpack with more items.

Beautiful looking bike man. I was wondering, does your buddy brian do any work on the side? I would like to have him install risers on my 2023 low rider s.

@TryItWithTim

11 ай бұрын

Thank you bro! I can ask him to see if hes interested

@pogospooky

11 ай бұрын

@@TryItWithTim thank you

@bcelectricco

10 ай бұрын

​@pogospooky when do you want it done?

@pogospookyg2187

9 ай бұрын

Hey man, I ordered a born scum seat and they are taking a while to get deliver it. I want to get the seat before I put risers on it, just in case it raises my seating position. I will let you know.

Where’d you get the tank knee pads?

@TryItWithTim

6 ай бұрын

pazoma racing .com

Did you have to do anything different to have both the saddlebags and sissy bar fit?

@TryItWithTim

2 жыл бұрын

Nope just used the longer set of bolts the saddlebags came with

@californiabro8774

2 жыл бұрын

Thanks for the reply! One more question, what's the height of your sissy bar? 30'?

1. What height windshield is that 2. Any issues with helmet buffeting?

@TryItWithTim

Жыл бұрын

I believe 13, I’m 5’9 and zero issues with buffeting

What size is the memhis shade

@TryItWithTim

4 ай бұрын

This one is 11 inches. I also have the 13 inch for longer road trips.

Hey Tim! Hope you see this comment, I got the Edward Richie sissy bar also and thinking of getting Leather Pros, you know which mounting hardware you used? I know they send you a shorter and longer bolt and mount if you have the Harley mounting bracket. Since the sissy bar mounts outside, is it sissy bar, leather pros, long bolt? Or short bolt? Or something different? Thanks and badass bike!

@TryItWithTim

3 ай бұрын

Hey sup yo! I used the longer ones. It’s gonna be sissy bar, long bolt and the leatherpros. I have a video on the leatherpros and install as well. Thanks for checking out the video and good luck on your setup!

@texasfedtexasbred1803

3 ай бұрын

@@TryItWithTim kickass bro! Appreciate your response

@TryItWithTim

3 ай бұрын

@@texasfedtexasbred1803 of course anytime!

Hi! can you tell me where the cover is from? Thanks

@TryItWithTim

Жыл бұрын

Which cover?

@bad.zoli.8625

Жыл бұрын

@@TryItWithTim front windshield

Hey man. Im thinking of getting one of these but im a short guy. How tall are you?

@TryItWithTim

Жыл бұрын

Hey bro I’m 5’9, I think you’ll be alright the seat height is pretty low

Where is the seat from?😍

@TryItWithTim

Жыл бұрын

Whiplash speed co. It’s called the Gambler and I have a video on it as well

Where is Bryan’s shop located? I have a 2023 low rider ST and need my 1k mile service done

@TryItWithTim

9 ай бұрын

his shop is his garage lol

@dinhzil

9 ай бұрын

@@TryItWithTim would you recommend him? I’m located in SD, Cali

What tuner are u running. Bike is awesome man!

@TryItWithTim

2 жыл бұрын

Thanks bro! I have the power vision tuner and was running a tune from fuel moto website. The most recent tune I have is from my buddy Brian who got it tuned in a shop and shared the tune via power vision with me since he has the same setup

@ericlang6065

2 жыл бұрын

@@TryItWithTim i have a question for ya. Did u wait for ur warranty to expire to do a full exhaust system and tuner. . or did u just say fuck it. i see u had slip ons for a while. .

@TryItWithTim

2 жыл бұрын

I did not wait, I said F it man because I know im going to keep this bike and my friend is a great mechanic

Curious what is the average mpg with the cam and exhaust? Sweet bike btw probably gonna pick one up as soon as I get some money freed up😂

@TryItWithTim

8 ай бұрын

Its around 50 mpg which is jus as good as my prius lol. Its a dope bike for sure...def a little pricey but if you ride alot its worth it

@frontieroverland4502

8 ай бұрын

@@TryItWithTim that’s actually better than the 650 I ride now. Definitely be worth it I am averaging about 9,000 every six months.

@TryItWithTim

8 ай бұрын

@@frontieroverland4502 you def ride! for sure it’s a great everyday commuter and road tripper

Hey how much did you get the bike?

@TryItWithTim

2 жыл бұрын

Too much to be honest lol....roughly 22k, I paid a hefty markup since I got it right when it came out

Did the seat move you further back?

@TryItWithTim

2 жыл бұрын

Compared to stock seat it does feel a little further back

@jakeb.1318

2 жыл бұрын

@@TryItWithTim ahhh gotcha, I'm 5'5 with short arms lmao so good to know

@TryItWithTim

2 жыл бұрын

the saddlemen seat feels like it pushes you more forward, that could be a great option

Why did you take down the "ultimate touring setup" video? Do the advan black bags not work anymore?

@TryItWithTim

4 ай бұрын

how did you notice?

@2WheelPursuit

4 ай бұрын

@TryItWithTim I was looking for it cause I wanted to see what bags you put on it but I couldn't find the video in my history, then when I clicked on the link to it in this video's description it said the video was private.

@TryItWithTim

4 ай бұрын

ahh gotcha...do you ride a Harley? Well the bags essentially fell apart on me during a roadtrip. The left saddlebag hardware rattled loose, the bracket holding the right saddlebag broke leaving the bag dangling. The tourpack lights stopped working. Advanblack isn't rushing to help me fix these issues and the bags are unusable so I'm back to my tried and trust worthy setup. Don't feel right leaving the videos up if I can't even use the bags.

@2WheelPursuit

4 ай бұрын

@@TryItWithTim Wow! That is good to know. I am looking at picking up a Low Rider S very soon to replace my Sportster 48 and was thinking of getting those bags, but glad to hear your experience first! Thanks for the update!

How tall is your sissy bar?

What are the things on the side of tank?

@TryItWithTim

2 жыл бұрын

They are rubber grips. Sometimes I hug the tank with my knees so I got them to prevent scratches and for grip

@jamesbrusius9920

2 жыл бұрын

@@TryItWithTim do you have an exact name of what their called?

@TryItWithTim

2 жыл бұрын

@@jamesbrusius9920 they are on pazomaracing.com website

@jamesbrusius9920

2 жыл бұрын

@@TryItWithTim appreciate your time my friend

@TryItWithTim

2 жыл бұрын

@@jamesbrusius9920 Vintage Motorcycle Rubber Gas Tank Knee Pad Side Panels in Light Brown :)

You need to show off the idle once the bike is warmed up. Idle changes and sounds like a muscle car.

@TryItWithTim

2 жыл бұрын

For sure! We can do a side by side of idle and warmed up with our bikes

@bcelectricco

2 жыл бұрын

@@TryItWithTim I got u bro😎

What size and name is your fairing bro?

@TryItWithTim

13 күн бұрын

Memphis Shades Road warrior with an 11 inch wind screen

@TryItWithTim

13 күн бұрын

kzread.info/dash/bejne/fJWblM-Hh5Cpn5M.html

Those green screen transitions can only be described as traumatic, when yours is an AMD graphics card.

@TryItWithTim

Жыл бұрын

Lmao 🤣 I will keep that in mind for future videos

How tall are you?

@TryItWithTim

13 күн бұрын

5'9

I have a 2017 street glide special M8 in 107, before that I had a 2004 road king with a gear cam kit in it. Here in 2022, there is nothing new about this bike and let's keep it real. It's still a bottom-end cam, hot air cooled engine with pushrods, lifters, and a big huge primary chain on the left side which is nothing more than outdated 1950's/1960s technology. I am leaving towards a liquid cooled bike bagger now so if harley davidson doesn't move forward with the Revolution Max platform Indian motorcycles are in my future because it's time.

@TryItWithTim

2 жыл бұрын

You aint wrong man! I had a Sportster now this Low Rider and Softail Deluxe. Love my Harley but not sure if I would get another. Definitely want to try out different bikes even electric ones if you want to talk about future tech.

@barrybarnes96

2 жыл бұрын

What diff does the tech make as long as it puts a smile on your face. Probably better gas mpg and reliability I suppose but most metric bikes are heinous looking and I can't stomach any of my bikes having a huge carbuncle of a car radiator hanging off the front of the bike.

I absolutely hated your video man. Before watching I had $25k in my pocket and now I have zero…this is your fault. In all seriousness that is the best looking bike I’ve ever seen, was never a Harley guy before watching but now I’m sold. My mt-09 needs a friend.

@TryItWithTim

3 ай бұрын

Lol best comment ever, thank you! I only saw a preview of the first sentence and was like oh nuuuu! It cost a pretty penny but I love this thing and have about 43k miles on it. Great everyday motorcycle and roadtripper. Would love to have an MT-09 tho!