I don't know what it is about this channel but the cinematography and studio setup is so calming. Always makes my day when you upload...

@bmwt4k

3 жыл бұрын

he has the best combination of information (Gamer's Nexus levels imo) and arguably the best cinematography as noted, definitely hard to match

@bmwofboganville456

3 жыл бұрын

@@bmwt4k This channel is Pure Kino

@ampere7220

3 жыл бұрын

@@bmwt4k agreed

@anirudhprabhu8521

3 жыл бұрын

True

@KessuPutte

3 жыл бұрын

The professionalism is why I like this channel. He doesn't force obnoxious cringey "comedy" but keeps things straightforward and clear. The content is mature. Not naive like in some others. Also the aesthetic of the videos is lovely.

Biggest lol moment: "here is an idea what it sounds like under full load" - ad for German navy starts with a ships fog horn blasting full volume

@Breadfan00

3 жыл бұрын

Ach ja die gute Marine

@ryanmassie448

3 жыл бұрын

I got a prageru ad staring Ben Shapiros stupid voice lol.

@Shieftain

3 жыл бұрын

@@ryanmassie448 oy vey

@lewissmith495

3 жыл бұрын

I got an ad called "life is noisy" at the same time too lol

@bonzai199

3 жыл бұрын

My ad was "LOOK AT THIS PHOTOGRAPH" by Nickelback

It's always a well explained walk through, problems or new builds! Thanks for bringing us along!

It's nice to see someone reviewing a build that didn't work as a warning to others ! It probably highlights more useful considerations than if it had all worked smoothly !

@KoriJram_Big

2 жыл бұрын

i dont like chips

@prxzmsAU

10 ай бұрын

​@@KoriJram_Biggood to know

You can also plug your GPU right into the PCIE slot and set the PCIE Gen to 3, before building your system.

@Vulper

3 жыл бұрын

200IQ move :D

@rickdiantres8873

3 жыл бұрын

U genius maybe?

@deanholland5601

3 жыл бұрын

Sure, and when a BIOS update after building resets it back to Gen 4? Easier to connect a cheap card on another riser than it is to disassemble the system and custom loop.

@your_average_cultured_dude

3 жыл бұрын

@@deanholland5601 just get a gen4 riser cable?

@markdavenportjr5129

3 жыл бұрын

Yep that what I plan on doing when I get my H1 case next year after I get my 5700 xt next month. :)

I think even failed builds still make very interesting videos, it's great to be able to see what works and what doesn't work! It's all educational and as always you present the information succinctly and through simple yet stunning visuals.

@janpetelinsek

3 жыл бұрын

Problem w this is that is a small form factor and that the airflow is limited. Just my guess, so a bigger more ventilated case should fix it, and a better cpu cooler

@jetpil0t

3 жыл бұрын

Definitely interesting to see how much power consumption is really practical in specific sized configurations. Getting any thing like 500W in 10L is pretty excellent, even compared to a console (assuming you sherk all reasonable considerations for cost).

@benjaminnrgaard9758

3 жыл бұрын

@@janpetelinsek it's really not the airflow or the cpu cooler. The problem here is the size of the radiator.

@kasimirdenhertog3516

3 жыл бұрын

I think it’s in fact more interesting, certainly if you’re an experimental person yourself

watching your channel for so long already, I really love how much you get into detail on such a niche category (sff).. thanks for providing those Infos always and in such a nice way! have a good one and I am very excited for the update! cheers

The production quality and presentation of your videos are phenomenal dude and athough I’ve been watching your channel for a while now, today I’ve thought to give you a shout to show you my love and support. Your channel is my 100% go to for awesome builds, informative reviews and detailed thermal testing. You represent us proudly here in Australia Ali, keep up the amazing work Yours truly A proud computer enthusiast from Sydney Australia

Ncase M1 dual radiator setup: "allow me to introduce myself"

@holden4278

3 жыл бұрын

*Allow me to

@DerechteWutz

3 жыл бұрын

@@holden4278 thanks

@NeVErseeNMeLikEDis

3 жыл бұрын

He wants this case thought

@holden4278

3 жыл бұрын

@@DerechteWutz oh wow thanks for responding so kindly. I’m not used to that on KZread lol.

@hannover3254

3 жыл бұрын

@@DerechteWutz what a wholesome reply

This is very honest to speak about something that failed. Reality is far from smooth sometimes when it is about making a build.

Looking forward to the update! I usually don't even bother watching mini builds but your channel has peaked my interest in them.

First video I've seen by your channel. I very much enjoyed it. Really cool build! Bummer there is so much compromise.

Honest and informative content combined with good and calming vibes. you're doing it right. thank you.

Thanks for showing builds that don't work out too, not only the impossibly successful ones. Would be very interesting to see a follow-up on the cpu/motherboard performance issue.

Can't wait for the Ncase build. I just bought one, so I waiting to see what you build!

First time watching one of your videos. I really liked the way you broke down the issues with your system, as you mentioned at the end, I had the same thought about a slim 240 rad being unable to cool down all that boling water. I'll be sticking around to watch your solution to this. Thanks for sharing!

5:00 An easier way would be to mount the GPU directly to the motherboard and solve the driver issues, set the BIOS settings Gen 3 and then connect via the PCIe riser. Of course in your case it would need disassembly etc so if you have a Gen 3 GPU lying around I understand how that'd be easier! I had been debugging this issue since days and finally found this fix some time back.

@sparkplugbarrens

3 жыл бұрын

This is a really good idea. I though about buying a gen 4 riser cable, but the one on Amazon doesn't seem to work on ITX motherboards according to a German KZreadr.

@butifarras

3 жыл бұрын

Yeah, buy a gt 1030! lmao just skip the riser

@abunchofiguanaswithinterne2186

3 жыл бұрын

@@butifarras in Thanos voice "I used the GPU to use the GPU"

@VEN0M415

3 жыл бұрын

When I had a 5700xt even in gen 3 mode it had black screens and other issues, but it was reduced drastically, it's a real shame that these cards have hiccups with gen 3 mode and the gen 4 riser cables cost a hefty amount.

@nhuljpm

3 жыл бұрын

I was anticipating this issue for my own build, but planned on using the mobos integrated output to switch to pcie 3 (before connecting the gpu). Is there a reason this won’t work?

This is exactly why I say the NCASE M1 is such a great case... I"ve tried lots of other SFF cases including the Louqe Ghost S1. And I realized the compromises of all of those others just aren't worth it to save few couple of liters. The M1 is small enough, but has almost no compromises.

I absolutely love your videos, very thorough and we'll explained. I especially like your low profile cooler test where the black ridge was champion. I can't fit the black ridge on my motherboard unfortunately so I have looked at the AXP-90 full copper cooler and thought you would be able to give it a great breakdown review with stock fan or noctua.

Respect for keeping it real! Pushing the boundaries of a mini PC is what you are doing here, which is fantastic. There is always a wall that you will hit, and maybe this is it. Sick looking system, though!

Pure SFF madness! love it.

So close but yet so far. You started with the Ncase M1, now going back to it is like coming home.

The NCase M1 is such a well designed case. Even after the amount of time on the market it still has the least compromise per liter.

Always love your videos; they've always been an excellent source for the enthusiast. The cherry on top? Your video production is the most polished tech series out there. Well done. Sorry about the build.

I was expecting Flight Simulator 2020 tests with this build. But I guess we'll have to wait for the Dual Radiator setup.

@ayoadebiyi6121

3 жыл бұрын

Did you really think he was gonna try flight some with the problems he’s having

@Optimum Tech I had the exact same issue on the B550-I with the 5900X and after only updating the Bios to the latest version from Asus. Installing the latest B550 chipset drivers and setting the overclock to auto fixed the issue for me. The CPU is now boosting to 4425 on Conebench R23 and ~4900 in games.

Oh, man... bummer. Sorry to hear, but grateful for your testing and reporting. I was just about to attempt this build, but will follow suit on your M1 build. Thanks, Ali.

I looking into mini pc builds too. I didn’t know they will have this much issue. Mini pc just looks cool and convenient to have. It stands out when putting on a desk. Looks simple and clean

"task failed successfully"

Really quite worried about the CPU + Mobo issue. Was looking to get a 5950X and Asus X570/B550. Really hope you can update us on whether another mobo worked, like the Aorus

@somedude2492

3 жыл бұрын

Bios support for asus mini itx is quite good, you could wait a sec for a new bios update.

@photofrode

3 жыл бұрын

This could be a memory issue as well. Others have seen performance drops when using 2 sticks as opposed to 4 but it could be more to it than that, e.g. 4 vs 8 vs 16 gb sticks.

@pacoa-kdbg9303

3 жыл бұрын

I have read some other people with asus x570 and b550 complaining about boost clocks, it is a matter of waiting for updates

@KnightHasen

3 жыл бұрын

@@photofrode The memory kit he's using should be dual rank, so that shouldn't be the issue. I could be wrong though.

@Zaj88

3 жыл бұрын

Would I need to flash the Bios with another CPU in it, in order to use the ROG Strix x570-i out of the box, in order to use it along with an 5900x?

that POV cam is insane! nice work Ali

Very interesting... Super looking forward to the future solution!

You’re the dr Frankenstein of SFF PCs my guy

1:08 can we take a moment to appreciate the PCB layout design of the 3090? that card so densely packed it's gorgeous

@ATP-Flo

3 жыл бұрын

The Founders Edition is even smaller/shorter.

@dario4496

Жыл бұрын

for that price you cant expect anything else :D

Good effort, mate :) It's just as much fun seeing what didn't work as it is seeing what did. It's the only reason I watch GN's case reviews ;)

Amazing work love the video. Keep it up!

My heart goes out to Ali since I know he loves this case and I was really pulling for this one. Fingers crossed for a bios update that makes this beast possible.

Amazing video! SIDE NOTE: your fingers turn grey on the left side around the 2:30 mark as you reach into the colour altered area. Just fyi.

@jeanbiroute

3 жыл бұрын

it's the upside down

@optimumtech

3 жыл бұрын

Haha, it's a desaturation mask. oops.

@GunBlasts

3 жыл бұрын

Omg i thought i was trippin’ so hard HAHAHA

@nosferathu258

3 жыл бұрын

That orange lamp is actually his lifesource. As he gets away from it, his body quickly decays.

Your videos are a visual treat! I have been asking you for a long time to make tutorials on how you shoot & edit your videos!

@dakalla

3 жыл бұрын

One does not simply reveal business secrets. ;)

@briandsouza7854

3 жыл бұрын

@@dakalla That's not a secret! There are other ways but it would be time consuming. If he teaches it directly then it could save us time.

Wow excellent video, learned a lot, what not to do and etc. Thanks!

Perhaps only external cooling water system would work, like the ones in our lab for the turbo pumps.

Holy crap i think you might of just saved me from returning my thought bricked 3070... I just realized the two builds i tested it on where the exact same thing, x570+b550 boards with gen 3 riser (sm550 and xita proto)

@RamjeProductions

3 жыл бұрын

You can force PCIe Gen 3 in your motherboard settings. So you'll still be able to use your RTX 3070 in your system. Other option is exchanging your PCIe riser cable to 4.0. Remember the latter is preferably much better as you'd probably update the BIOS.

@faded_taco1816

3 жыл бұрын

He just saved me from doing the same build as him. So glad I didn't waste my money.

@Lead_Foot

3 жыл бұрын

@@RamjeProductions Pci-e gen 4 has no official support for risers. Some of the risers sold claiming they support gen 4 are exactly the same as their gen 3 risers. All you can do is get the best quality riser you can and hope the signal quality is good enough.

@naynyamish270

3 жыл бұрын

@@faded_taco1816 I still dont understand the actual issue with his build that ended up perform not great. Is it the motherboard or is it the riser cable?

@AlbertoNoys

3 жыл бұрын

@@shadyyogainstructor932 I still don't fully understand how to avoid the first issue.

Im impressed you were even able to fit half that rig in that tiny box. Well played man.

Perfect video Ali, again, thanks! And a bit of a surprise in some aspects. Total indifferent question regarding the video's main concern, but I need to know: why are the WiFi antennas plugged into your board? Im guessing you go with cable when it comes to competitive shooters, so Im really curious :)

It's going to be interesting to see how "cool" the rx6900 xt will be in these sff cases.

I'm really happy we have optimum and everything He does for us but I feel like he enjoys actually building and tweaking far more than the actual games. Keep it up though.

Ah! I was *literally* discussing whether this was possible and how far you could push those super-small cases. Good to know where the limits are!

As always:Really nice video! I like your content very much. The atmosphere you're creating in your videos combining on point information with the cinematic scenes and music is just awesome. But I have a question. A few vids back you showed us your dream CPU waterblock become reality: the Barrow waterblock, reservoir and pump combo. But since then I haven't seen you using it in any of your setups. Is there any certain reason for that? I'm new to watercooling and am planning on building a new SFF PC Build with a custom loop and would like to use said combo block from Barrow. Is it too weak for a full loop including GPU?

I think in this case a 3-slot aircooled GPU + a liquid cooled CPU is probably the best option... unless you're one of those crazy ppl cramming 2 240mm rads into the T1.

@Dr01nE

3 жыл бұрын

lmao. Fabio doin' God's work tho.

@achannelhasnoname5182

3 жыл бұрын

That does sound like a good idea!

@sushimshah2896

3 жыл бұрын

Does the T1 allow for 3-slot/FE 3090?

@hoanglh94

3 жыл бұрын

But not many RTX 3080 and 3090 can fit since all the AIB gone with 315mm++ card length

@Heartl1ne

3 жыл бұрын

This is my exact build and it works fantastically, RTX 3090 FE air cooled with an i9-9900K cooled by an AIO

“This is what is sounds like at full load” KZread ad starts playing My god this PC fan makes an annoying sound

@informitas0117

3 жыл бұрын

Don't give hardware manufacturers any ideas.

@GATOtyger

3 жыл бұрын

KZread premium = wait for the g pro clicks

@wesleymckee9462

3 жыл бұрын

same

@GATOtyger

3 жыл бұрын

@SOUL SEEKER isn't your ads time money?

Yep, back to the M1 with dual 240 rads. It’s just such a great setup! I rebuild my main PC about once a year, jumping cases and components, but my last several builds have been M1 and dual 240s. For peak single-GPU gaming, this is my favorite combination of size, acoustics, and performance. My system is a 3700X and 2080Ti now. I’m planning to upgrade to a 5900X and 3080/6900XT, and I will still have no problem dealing with the heat quietly. The 30-series’ smaller reference boards will even give better airflow to the bottom rad while being much easier to build around.

So glad this channel growed so fast

The song at the start is Endless Sunset for anyone who wants to know. I think the artist is called Nastya?

@skzeeman007

3 жыл бұрын

It is by Nastya Kazantseva

The Ncase M1 is just a phenomenal case...

@8bitsamurai6

3 жыл бұрын

It's a legend. The real og. I got a v5. Really want the v6.1 but idk really worth switching. And love the nr200p for a cheaper alternative. Itx scene. Just keeps evolving.

Have you considered running an FE card with the new EK FE water blocks ? It's a lot shorter and you might be able to fit an additional 120mm rad at the end of the gpu. ALSO I know you need an nvidia card for encoding but will you build an all AMD comp in the T1 just to show benchmark / potential of the system?

wish i had discovered your channel years back before my current build or laptop purchase. all i wanted was extreme sfx build

Production level is becoming truly awe inspiring.... I remember when you had a few thousand subscribers and I jumped on the bandwagon due to your slick editing and well-researched informative content. The evolution is simple mad. You are blowing the big channels out of the water. You used to make them look la little lazy, now you are making them look cheap,bland, and unprofessional.

I'm not a tech-head by any means and the only times I check out tech related videos is whenever I am building a new rig which is maybe every 4 years or so... But whenever you upload a new video and it pops up in my subbox I refuse to not click on it - Your videos are by far the most aesthetically pleasing tech videos on this website and considering how saturated the tech-video market of youtube is, that's something to be super proud of. Keep doing what you're doing, 'cause you're doing it right man! 🖤

Hey, I've been having the same performance issues with my Crosshair VIII Formula and my 5950X, thanks for the sanity check. I've played around the BIOS and found a few settings tweaks greatly improved performance, both single and multi-core. So far, going in and simply setting a -0.0875V offset has increased my effective all core boost up to 3.8GHz, up from the 3.6GHz I had when everything was "Asus stock settings." My processor also kept boosting up to 4.9G8Hz or on a single thread when using CBR20 (615pts, much higher than the stock 589 I was getting). Temps went also down considerably when a single thread was being used (was getting upwards of 70°C when stock on a dual 360 radiator open loop with a similar DDC pump, down to 60°C-ish). Explicitly disabling PBO max enhancer also improved the accuracy of reported clock speeds (it reported 4.4GHz all core when enabled, which was obviously wrong as was visible on HWinfo64). Enabling PBO expectedly increased multi-core thermals (50°C on average without PBO vs 79°C with PBO in CBR20), as the current limits went off the roof (215W reported vs 120W without PBO), but the all core boost clocks went over 4.3GHz and the single core boost kept hovering around 4.9GHz. All in all, the max VCore I observed stock was 1.5V on single core workloads, which went down to 1.413V max with my undervolt. PBO raised the average 1V all core workload to 1.25V with a 500MHz or so boost to all core frequency. I think this is the result of an incredibly inefficient BIOS on the 'older' X570 boards which blasts current and voltage to extremely inefficient levels on lightly threaded workloads while throttling the voltage down hard to remain in the 120W official PPT limit. I'm equally disappointed that performance is so comparatively poor relative to other motherboards as Strix and Crosshair motherboards represent the higher end of Asus motherboards and one would expect they'd be paying closer attention to those to make sure performance stays top notch. Hopefully a BIOS update in the future will fix this. Thanks for the video. It motivated me to look for more intricate solutions than I usually would. I hope this helps in the off-chance you read this, as that build looked very cool. I may or may not do a follow-up to this with after playing around more with PBO settings if anyone's interested.

I had zero interest in sff builds until I found your channel. Fucking amazing content and I can't wait to see where you go next with the build.

This was to be expected after just giving up the huge heatsink of the GPU and hooking it up to the CPU's radiator.

5950x+RX 6900 XT? I would guess IN GAME they are visibly faster than 5950x+3090.

@ryanyogianto

3 жыл бұрын

Smart Access Memory feature ? Well maybe... but I think the main problem is still that PCIe gen 3 riser, dont u think so ?

@illietw

3 жыл бұрын

And less power draw

@kye3k1

3 жыл бұрын

He does video encoding so he'll be sticking with the 3000 series. Nvenc is really that good.

@choatus

3 жыл бұрын

DLSS and RTX one or the other or both will make the Nvidia card faster.

@ca9inec0mic58

3 жыл бұрын

@@choatus but then DLSS isn't supported in 99% of the games, and amd has their own equivalent of DLSS called super resolution launching on December 10th i believe

Hi Ali, long fan of yours. Ever since the Nvidia Ampere presentation of the 3080 and 3090 I knew you would try them in a custom liquid cooled loop in the FormD T1 and in the Ncase M1. My impressions at the time, even before seeing them confirmed by your videos, were that the FormD T1 could have been a good candidate for the FE 3080 to be almost viable in air-cooled configuration, thanks to the possibility to have the extra 1 slot space at the exhaust due to the possibility offered by the case to have a 3 slot GPU compartment. Still I though that the 320W were too much to truly be comfortably viable, but the actual results were a little bit better than I expected. Now onto this video, even before watching this, I thought that both the 3090 and 3080 would have been too power hungry for the FormD T1 with their super high TDP for a single radiator that has to cool a 120W CPU as well. I imagine that the performance in the Ncase M1 will be probably adequate with your dual radiator set-up that you used for your OC 10900K and 2080TI (with a combined wattage at just under 500W if I remember correctly). Making a quick calculation an undervolted 3090 at 335W + the stock 5950X at120W totals to about 455W under a sustained load witch puts in a comparable power envelope to your previous system! By the way, your work and this channel is a huge inspiration for me, as you really create some exceptional videos, with truly mesmerizing cinematography skills and the quality of information is also very high!

Hi! Great video and presentation as always. Having just finished an external cooling tower custom loop, and hearing what you were in pursuit at the time, may I suggest keeping with this case and just adding an external cooling setup? As you said you could make it work with 2x240s or maybe an easier to setup 1x560, that you could have resting at the wall and below the desk with acool's quickdc's for easy maintenance. I decided to have a separate fan controller and power supply for the tower but you can def make it more elegant as you prefer. Thank you.

I was having the same kind of issue with my 5900x and my x570 tomahawk where it would not boost up even close to the rated speeds. I was getting like 4.1 all core and 4.5 single core. Turns out in the bios that if you enable PBO and manually set an additional 200mhz clock in a setting that pops up AFTER that then you can get the rated speeds. Then there is also the AMD Curve Optimizer which tremendously helps with temps. I am now boosting to 4.9-5ghz single core and 4.55 all core while running much colder than before, so I am hitting about 70C exact. You also have to manually set the PPT, TDC, and EDC as mine would be stuck at stock thereby limiting my performance to 4.1ghz. With my board I can go up to 500 for PPT (maxing out currently at 260), 210 TDC, and 290 EDC. To access this part of the bios for me it was in the advanced bios mode, then select settings, then advanced, then AMD Overclocking. From there you can find the Precision Boost option and set it to advanced. This is technically an overclock but my system is somehow running up to 10C colder than stock, at slightly higher voltages, and hitting much higher boost speeds.

I hope this setup works for the NR200

Enjoy your video so much, the music, cinematography and pace... Everything is just so enjoyable. Thank you!! One question i wanna ask, the RTX30 series are much longer and practically is reach the width limits of NCase M1. Do you think you can put RTX3090 into the dual Rad setup? BTW that dual Rad setup is amazing and I'm thinking to replicate it.

Did a similar build in terms of space in a wall cavity 2 years ago. Had similar issues. I was able to resolve it by splitting the cooled liquid coming out of the loop and sending 2 independently cooled lines to the inlets and then taking the 2 independent hot lines out of the components and combing them back into the loop. I also kept the fan speed at full speed on the rad at all times. Another issue you need to resolve is have another fanned exhaust in the case to get eid of the residual heatbfeom other components

Can't wait to see this build transplanted into the NCase M1

@matt090385

3 жыл бұрын

From what research I’ve done, water cooling the 3080/3090 is a no go at present in the ncase m1 because the water block inlet/outlet values stick out further than the case side panel. It looks like the founders edition card with the special ekwb block for it might work, (depending on if they interfere with the bottom radiator inlet/outlet in an M1. Regardless the founders edition water blocks aren’t on sale yet.

@albin3399

3 жыл бұрын

@@matt090385 It shouldn't be an issue for the reference cards either. The reference PCBs are pretty tiny.

Wondering why you don't just go for air cooled GPU? From previous videos you got cooler 3090 in the T1 using undervolted air cooled GPU.

@matthewtompkins5540

3 жыл бұрын

Then it’s not his dream PC!

@odinsplaygrounds

3 жыл бұрын

@@matthewtompkins5540 I guess so lol. I get it though, sick watercooled setup and the particular waterblock & pump etc.

Nice video! Always enjoyed how to build these systems. Can you do a video of building 5950x + RTX 3090 in NZXT H1?

sir .. your videos is extremely professional .. i exceptionally love every video you make

I just bought all of these components with the hopes of fitting them into my T1.1 whenever it arrives. This is a real bummer. Please update us on any advancements on how you get it working! Also, thanks for the great videos, they are thoroughly enjoyable to watch.

Can see the edge of your desaturation mask at 2:19 your fingertips keep turning grey ;)

@optimumtech

3 жыл бұрын

Haha!

@jev233

3 жыл бұрын

@@optimumtech hi ali, did you try something like this? www.reddit.com/r/FormD/comments/j6s400/formd_t1_with_2x240_radiators_nouvolo_aquanaut/

@CaveyMoth

3 жыл бұрын

I knew that he was an engineer...

I feel like you could make this work by keep the raditor external to the inside of the case. like take the extension off, and pedastal the radiator on top with some rubber feet, exposed to clean air

What are those vertical tube lamps that you use for lighting? They look amazing. Where can I get one of those?

Ali we see you with the gun show homie. 💪

@22Tech

3 жыл бұрын

Smh not sff arms

@toddpiedad651

3 жыл бұрын

@@22Tech ATX arms

@22Tech

3 жыл бұрын

@@toddpiedad651 lmao trueee

@optimiumtech Is that the LG monitor u recently reviewed ? 4k 144hz 27'' ?

@cthzierp5830

3 жыл бұрын

Please don't mention it, it's already impossible to buy 🐄

@akaidi1270

3 жыл бұрын

@@cthzierp5830 and it hurts not being able to get while seeing it :v

Lol thanks for the review i really needed this. i have a 3060ti and 5600x really was thinking of this board but not so sure anymore

Have you considered reviewing Small ATX form factor cases? I know ITX and such is typically your focus, but was wondering if you found any value to looking for the smallest possible ATX case to take advantage of additional I/O and such available on full ATX sized ATX boards.

Always annoys me when you dont tell us what music you use. You have great taste!

When recommended shows me the video before "all" notifications being turned on 😑

@claritoresdiano1021

3 жыл бұрын

KZread A.I

Comino Otto fits the 5950X + RTX3090 fully watercooled or aircooled, and looks awesome!

Just last month, I also did 5950x + 3090 in an 13L ITX zzaw B2 plus. All air-cooled, C7 Cu+conductonaut on cpu, stock fan on RTX Gigabyte Vision, and four fans for push-pull bottom-to-top config. CPU and GPU is set to Eco mode and 90% PL; 48°C and 38°C at idle; 83°C and 73°C at full load, respectively. Very inspired with your work.

Witcher 3 still shredding top of the line GPUs years later lol Year is 2120: humans colonised mars, made contact with alien species, fully defeated the nature and became immortal, Cyberpunk 2077 still not released and Witcher 3 100% loading newest RTX8090Ti.

@iamf6641

3 жыл бұрын

it will never happen because we have never penetrated the van allen belts. its all cinematography.

@iamf6641

3 жыл бұрын

ie "CGI"

@BenjaminSodos

3 жыл бұрын

You think nVidia is only going to release 1 new generation of Video card every 20 Years?!

@pineaplejuicegg7667

3 жыл бұрын

Fun fact ...witcher 2 shreds them even worse theres a forest which is highly populated by well ...plants and trees is a forest duh, that destroys frames

@JohnyScissors

3 жыл бұрын

Yeah and so will crysis. Its what happens when things aren't optimized

You can buy Gen4 riser cables (search for LINKUP)

@syruphi

3 жыл бұрын

I've heard mixed reviews for those, have you tried them? I don't want to jump the gun for my nzxt h1 build for a pcie3 cable with fixed bsods rebranded as a pcie4 cable

@BENBOBBY

3 жыл бұрын

@@syruphi Yeh I have one. Though currently I have a 2080 with is Gen3, when I finally get my 3090 I'll let you know!... It gets great ratings on Amazon so hopefully works well.

@syruphi

3 жыл бұрын

@@BENBOBBY damn looks like it'll be a long wait lol

@BENBOBBY

3 жыл бұрын

@@syruphi Yeh lol. Im number 87 in the queue from the store I bought it from and they emailed today to say they arent getting any more stock until the 4th December ugh :( Also waiting for my 5950X. If only I was a famous KZreadr!

@eirayu2439

3 жыл бұрын

Sadly not in the correct lengths, yet.

Have you tried to use XMP? I heard that it completely changes the way that the CPU operates, allowing for temperature and benchmarks to be achieved as advertised. It is often overlooked

Would also love to see this in a Ghost S1

Damn I have the same board and wanted to go with the 5900X. If it underperforms so much I need to get a different board. BTW that PCIe 4.0 problem is common across all X570 boards. I read the same on the MSI Unify.

@AlexanderJones88

3 жыл бұрын

I'm doing the same build as you (nCase m1 tho) - it's a gut punch when SFF Jesus goes and says the mobo sucks. I've already got it... hope there is a BIOS update...

@vusun123

3 жыл бұрын

Have the same board and CPU as Ali, and yes it boosted only to 3.7Ghz, very odd. Must be a problem in the Bios, hopefully Asus fix this

@yummypugs

3 жыл бұрын

damn, i ordered this board last month asewell and am getting my cpu on Friday. :/ I hope this isn't a widespread problem cause he said this was the best board for itx... Not sure what to do

@vusun123

3 жыл бұрын

@@yummypugs wait for newer bios perhaps

@yummypugs

3 жыл бұрын

@@vusun123 yeah I know but my return window is closing soon, on Friday actually :(

“There was plenty of thermal headroom, don’t know why I’m throttling” Runs heaven benchmark and CPU goes to 90 Celsius....

@djdorant2556

3 жыл бұрын

Right! I didn't even see a rad on it.

Recently got the Watercool MoRa 3 - 420 radiator in stainless steel version with 4 noctua 200mm chromax fans. The radiator is really goog looking actually. I understand if you prefer small cases but in this case an external radiator with some quick connectors just makes so much more sense. The MoRa is great and you could even hide it somewhere if you don't like to see it and just use longer tubing.

Keep us posted on that badass 5950X (or 5900X) / 3090 combo in an itx case. 👍👍👍

I think you should wait for AMD 5000 CPU series new bios ..

@Alobster1

3 жыл бұрын

It was completely a cooling issue. The cpu isn't going to boost higher when it is sitting at 79c in blender. That is way too hot to be boosting higher. It was getting up to 89c in games and 90c is listed as the max temperature for these cpus

You're saying you got 10% less perf on this MoBo compared to the full review one. Did you use different memory for this build? Or what was the RAM setup there?

@essenceofsias

3 жыл бұрын

You thinking what I’m thinking? Needs moar ranks?

@matrix1303

3 жыл бұрын

@@essenceofsias Yeah. But I wrote the comment too hastily. Maybe the lower perf is really due to insufficient cooling.

i love the orange light behind u~

Great video, please do the Ncase m1 build!

Keen to see this same build with a mobo swap. If that’s still no good, I’d be more keen to see this build in a slightly larger case with the new Radeon flagship gpu.

Hey Ali, you seen the 10% performance drop video’s when using dual single dimm vs quad dimm with Ryzen CPU’s on other major KZreadr channels? Great video regardless

@TheDrHao

3 жыл бұрын

He is using dual channel kit g-skill 32gb 4000mhz trident-z

@tawl-x

3 жыл бұрын

Its about Dualrank (DR) and Singlerank (SR). With 2x DR you have the biggest bandwith, like with 4x SR. Less will reduce the bandwith, so performance will drop. Like with every other Zen gen oder Intel.

Well done for trying! Wonder if performance issues could be a chipset driver issue? It is still very new of course...

I have a 3080, MSI B550i and I went through that same issue you did with a gen 3 riser. Even after you get through the issue with the BIOS, I still have a ton of graphical issues with 3 different gen 3 risers even when the bios is set to gen3. Slotted straight into the board, I have absolutely no issues. Those same risers function perfectly in my kids b450i builds with 3070's inside. I switched my build over to a non riser SFF. I think I am done with risers for the time being. It is just an another possible point of failure and headaches I really don't need.