Tips on painting - use a white, off white or cream color on the walls. Darker colors absorb more heat from sunlight and you will cook in the summer. Same for the roof - pick white corrugated metal. Tar shingles are heavy and hold heat a long time. Last tip - paint the interior before installing anything. The wood will get wet during the time the roof is open and soak into uncoated surfaces. All this learned while building my own observatory :). Good luck!!

@LearnToStargaze

6 ай бұрын

This is super helpful! I’m going to keep this in mind for my build.

@OGParzoval

5 ай бұрын

Yeah you could also do radiant paint for the wood before the roof is installed so the roof wood reflects heat away. Though my idea is going with what Astrobackyard did. Quick and easy, and if we move it moves. If I ever build out on land then I'd go ham on a new setup.

@Youtuber-ku4nk

5 ай бұрын

Good idea not to use dark colors. Not only you wont cook inside, but more importantly the structure will not radiate heat and make distortion in the air that the telescope will be looking through :)

The reason you may be off a little when lining up your cuts, because when you make a cut, you have to account for the width of the blade itself. That is called the Kerf. Great bulding plan though. I have 60 acres in East Texas where you can see the Milky way, and want to build an observatory.

I don’t know if you’ve completed building your roof outriggers yet, but you haven’t, don’t make the tracks level with those of the building. On my observatory I have metal plates and angle iron for the casters to roll on. Because I made my outriggers level, I get water rolling back into the observatory which then drip down the walls. I think a slight downward angle would have prevented that.

Came for the astrophotography, stayed for the carpentry.

The flooding around me in New Hampshire with that heavy rain storm took out some bridges. Glad to see you didn't get washed away

Awesome project, its nice to see the progress. And I love your backyard too. Looks so peaceful there.

I give you a lot of credit for staying so patient with this build!!! It’s going to be amazing!!!

Your construction process makes me very glad we have dry sunny weather most of the time. Wind was my biggest enemy when I built mine.

Such an exciting project, Nico! I doubt I'll ever have the space to build an observatory but I always vicariously enjoy watching people make spaces that work just the way they want :)

Nice job! I've built two homes for myself. Lumber is a bitch. Crowns, bows, twists, etc. Nice job.

I've finished a 1.7m tall pier, 1ft high deck, just waiting on my shed to arrive and I'll have my observatory up and running! It is so exciting seeing it come together!

Definately coming along nicely. I can relate to double marking the studs as I do the same. Same frustrastion with the rain during the build. When you get to the roof, consider using 3/4" shims between the wall top-caps and the runners holding the trusses in place. This will let you put all the trusses in place and squared up adding in the rails afterwards. I found that by doing this, once the rails were fit and the rollers screwed in place, the roof actually lifted off the shims. It also let me function the rolling roof before adding the additional weight of the full roof. There was no problem supporting my weight to close up the roof panneling - Food for thought. Would love to see you do a follow-up presentation on how to determine your FOV within the shed when looking to shoot DSO's.

most outstanding job, now i have no reason not to build mine seeing you can do it by yourself. Thanks so much for the in-depth information very helpful.

It's looking good. I know what you mean about doing something like this by yourself. It's nice to be able to say 'I built it' rather than 'we built it'. I'll be starting my 2 metre x 2 metre storage shed/observatory in the next few days and using heavy duty drawer slides for a lightweight flat roof.

Looking good! El Nino winter, hopefully you will be dryer than normal.

I just looked last night to see if there was an update! So excited for you!

Only a couple of hours ago wondering where you had gone. Glad to see more content.

Looking great Nico.. That storm was insane down here on the cape

For the siding paint the bottom to stop wicking moisture over time. Nice work looks awesome

Your building looks nice. SCREWS for constructing the framework. Years ago Habitat for Humanity built 2 houses almost side by side. In one house they used common (not galvanized) nails and in the other they used screws. That's in an area where the wind gets high at times. During a strong wind the house constructed with nails stood, but the one built solely with screws suffered damage because many screws broke because screws were brittee while the nails were more pliable and bent instead of breaking. The house built with nails survived because the nails bent a little in the wind, yet sprang back to their original shape when the wind let up. That was years ago and the screws might not ne as brittle now as they were back in those days. You might already know that galvanized nails are required when building with pressure treated material. The chemicals in pressure treated material attacks and weakens non galvanized nails. I got that galvanized nail information years ago. My understanding is that more recently different chemical(s) are used for pressure treated (insect resistant) wood is different now. I think galvanized nails are still recommended. The only other thing I noticed is: in my location nail spacing for sheathing is much closer than 12 inches. That's because of the wind loading where I'm located. 12 inches might be correct for you. Your lumber supplier should have that information. OR a builder who is required to meet building codes. All the best to you.

I like de creative way you work on this, great job

The project looks great! I admire your fortitude doing this yourself.

Super excited for your first light with the observatory

Use a section of Z flashing along the top edge of the wall when you add the filler panel on, after installing the roll off beams. This will help keep water out of the observatory.

Nice job so far, but I am Really surprised you did not put a waterproof breathable membrane around the framing before covering with your exterior boarding, this is a normal thing to do with any exterior type building of this nature and design….🤔🤔

Looks real good. You are so accurate and precise. I have had my observatory for 17 years. After about 6years the roll off rails made of 4x6’s started slowly bending and warping.i had a 14 ft span with a 4x4 in the middle. I eventually switched to steel ibeams and the problem went away. My angle iron which the V groove wheels ride on was welded to the i-beam.

I'll be doing this come spring... taking notes from all the videos I'm watching right now...

looking good lot of progress for this time of year. a trick we found while doing craft show on popup canopies was to bow a pool noodles in the corners to hold the top from sagging similarly a couple of pvc pipes could be bowed against the walls to keep your tarp from sagging in the middle ( also good to use for conduit latter) looking forward to learn more from your build hope to someday get an observatory made for us as we live in one of those good dark spaces (3/4 mile to nearest neighbor and12 to the nearest town) HAVE FUN and happy holidays

Nothing like fresh lumbar

@AnomalousAstro

6 ай бұрын

My lumbar gets sore from too much lumber

If you ever build another observatory, framing lumber is normally fine if it gets rained on, so you don't need to cover it in tarps and stuff.

Amazing journey, thank you so much for sharing !

Looking great Nico!

Looking super, Nico!

Very good to know about observatory, congratulation.

Great progress. Thanks for sharing and have a Merry Christmas. 🎄🎅🏻❄👍🏻

Those beams outside could be from cider. Critical beams and post could be microlams. They are very weather resistant.

Congratulations to the walls!

Excellent progress!

This is AMAZING,Nico!!! AWESOME work!!!

Nico, nice work and it looks to be coming along quickly.

I use to live outside of Keene. Yeah, snow shows up when it feels like it. Miss living there.

I’m learning a ton from these videos. Thanks for going into so much detail, especially on the finer points.

Great project. Love the wood work. I still wonder how much costs and efforts this is compared to a pre-built dome.

Love your work! I know that feeling once it all starts coming together, relish it!

Looks great, your logical and detailed orientated approach is excellent. Jigs, templates and methodical procedures really pay off.

Awesome work, Nico! You’re really starting to fly through progress now!

Great vid as always :)

Love watching the process and the trail and error of this ❤

So impressed with your videos. Keep it up!

Absolutely love this project, it's coming along quite nicely! Inspiring, to say the least. ♥

Can't wait to see the finished observatory!

I'm greatly enjoying your project even if I'll never build one (I live in one of the top light-polluted cities in the world...). It does make me laugh the effect that having so many fine tools and helpers (you do have great choices of equipment!) makes you tend to forget how people have built stuff before CNC and precision machining. Boy! How I laughed at your laser level when -as someone already pointed out- a transparent water-filled tube would have done the job better!😆 Thanks for sharing and I look forward to the rest of the process. Have a happy new year!

Awesome work, Nico! Very much looking forward to more! I plan to start on mine sometime in the coming year.

Great job Nico!

Can't wait for the next video :)

So impressed with your work! Great astrophotographer and builder! Looking forward to seeing you on Astroworld in Jan!

Fantastic video, really enjoyed it. Thanks.

With so much wood involved I guess you'll have to deal with wasps and hornets at least twice a week in the warm seasons to get them out as they simply love wood! :-)

i love your videos. i just started my astrophotography journey and i am learning sooooo mutch from you

Nico, amazing work, you creating a great observatory, I envy you, awesome observatory! Congrats

Progress ❤ always forward

Lookin good!

You're encouraging me to get started on my observatory. You have really come a long way. Thanks for sharing. I can get an idea now what I am up against. I will be glad to see what it looks like when you're finished. Godspeed!

Looking real nice Nico! Looking forward to the next update. BTW, how’s the analemma project going?

looking goof! getting the urge to go build an addon to mine :) Do I need it, of course not but I like the planning part and then building !!

Better than the fisher-price-like observatory than the canadian ytr had at some point and remove it quickly from his backyard bc was very ugly.

This is very impressive work Nico. Sure, you’ve made mistakes (everyone does), you’ve done some stuff that others want to tell you a “better way” but who cares? You’re doing a great job, especially for someone building something like this for the first time. Can’t wait to see the next video, even though it may be some time due to weather. Regardless, keep up the great work you’re doing! Happy Holidays ~ Phil

looking good. My only question is where is the door and window headers?

How ya been Nico, haven’t seen you up in a while. Hope all is well .

I remember when I was building my observatory not that long ago, and every day it kept feeling more real. That was never so strong as when I built the walls.

what size instruments is your obsy intended for. any newts in the cards or only refractors

I wish I knew how roofing squares worked when I built mine. I made my walls too tall and had to cut the tops off of them. Trial and error.

Looks great but aren't the piers too low compared to the walls?

@NebulaPhotos

6 ай бұрын

Nope, they are correct for my location, I can only image down to 25-30 degrees above the horizon due to the tree line on my property, so the tree line is my limit not the walls. I’ve now had the chance to test this and all my measurements were correct thankfully.

@Bortle10

6 ай бұрын

@@NebulaPhotos good to hear :)

To eliminate the floor induced vibrations, the telescope should be on a separate foundation, no?

@NebulaPhotos

6 ай бұрын

Yep, I have two independent piers with air gap coming through the floor. Check out the last couple video in this series for details

@Ab20222

6 ай бұрын

@@NebulaPhotos fantastic, good job! I didn’t notice the piers under the plastic bags

Why did you decide against putting on a wrap (eg Tyvek) before putting the siding on? Do you not plan on temperature controlling the interior?

@NebulaPhotos

6 ай бұрын

Correct, it won't be sealed / temperature controlled - difficult with a roll-off roof. Some people add a warm room that can be temp. controlled, but I didn't do one mostly to cut down on cost/complexity.

Warning guys, “All Star telescopes” out of Canada, will sell you “used” telescopes as new, then they ghost you.

Metal framed structure would eliminate any settling and rocking.

I’m J E A L O U S

Of course, a dome can only hold one scope…

seems elaborate for a cat house but ok