My Dream Garage Full of Sh*t is DONE!
Ойын-сауық
It's done! Kind of. My Dream Workshop is finally presentable! After being in this new house for 2 years it was surreal to break ground on this project. Did it end up costing more than I had planned? You bet! Was it worth it? Boy I sure hope so!
In this video I'll be covering the basic renovations that we're performed, from the electrical changes, to the insulation, HVAC, and eventually to the quality of life improvements and the layout of the new workspace!
3D Printer shelving, Resin printing wash n cure stations, mobile benches and racks, desks, toolboxes, paintbooth, lighting and more!
This entire space got such an amazing overhaul and I could have never imagined it turning out the way it did! Thank you everyone who helped and supported me! Enjoy the video!
▼ MENTIONED IN VIDEO
Amazon Cart | amzn.to/3QLGqIR
Kobalt Workbench | shorturl.at/DLNY0
Kobalt Cabinet | shorturl.at/DGP56
Nanoleafs | shorturl.at/uLOY0
Craftsman Toolbox| shorturl.at/oDTV1
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitch | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
ELEGOO| tinyurl.com/yvf6v6cm
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
▼TIME STAMPS
0:00 - Intro
#3DPrinting #Workshop #maker
Пікірлер: 192
thats not a workshop. thats a garage thats full of shit
@FranklyBuilt
10 ай бұрын
Please elaborate on what your definition of workshop is? My understanding was a place or “Shop” where I’m able to do the “work” I need to in order to make things. But you seem to know more 🧐
@creatorkarl5968
10 ай бұрын
That's not a comment, that's jealousy masked by hate.
@IsThereAnEkkoInHere
10 ай бұрын
That's not delivery, that's digiorno
@Banished_Builds
10 ай бұрын
Imagine saying this when his 3D printers alone get more done in a year then you do ☠️
@sidneyprints4846
10 ай бұрын
You need a hug ? Sounds like you don't get enough love
You should print a mount for your camera to attach to the peg board
Being disorganized is the biggest time waster. You never know where anything is. One of the cleanest and nicest setups ive seen. Congrats
Incredible set up Frank! Thanks for sharing man. You have your dream workshop that looks like its going to make more dreams come true. Absolutely amazing man.
Hey, NC here too! Might not get super cold but does get nice and humid in the summer.
You could always print labels and put them on some magnetic strips. Be easy to rearrange, and that way, you won't procrastinate and forever be stuck with the tape 😂
good video but just so you know, resin doesn't really expire. those expiration dates are more or less pointless, you can use resins that are 10+ years old no problem. just make sure you give it a *good* shake before you use it to make sure it's mixed properly
Keep up the good work frank!
@KickBass3d
10 ай бұрын
:3
because you don't need to watch youtube live :) it's not a chat. Nice layout downstairs in your garage Frank, the printbooth looks familiar, you've shown that before but White Cars? dirt is way to visible on those :)
Awesome! Such a cool workshop! Can't wait for new videos from this new workshop.
Frank (the goat)- you won't be able to replicate this workshop exactly. My mind- challenge accepted
Looks 🔥🔥🔥
Man such a great workshop and video Frank! Keep up the amazing work bro!!!!
This video was completely awesome, I love these kind of videos, thank you so much, I’ve been following your channel for a while and I think this video really boosted up this channel
Dam nice set up!
This set up is beautiful!!!
I just received my first printer Qidi X Max 3! I'm so excited. Thanks for your videos, they are a big encouragement. Now time to watch your set up!
Thanks for sharing and for all the videos.
Hey Frank thank for showing us the workshop gave me a lot of ideas for my future workshop.However now that I'm thinking about it you have a lot of demon slayer swords but you don't have Hawkeyes ronin sword so that would be cool.
Awesome video and great space. Make sure to follow-up with the final HVAC air cleaner parts. Cause the carbon filters can take the resin smell out of your work area but they don't do much to remove the harmful VOCs in the air.
Amazing
Love the workshop. It's a big inspiration to get my workspace finished.
Look so good and functional, usually those two things don't work in tandem
Nice! I'm on the workshop journey as well. My walls just went into my new building, finished painting last night. Next step is flooring, cabinets, and shelves! I'm hoping it is finished within the month!
Currently saving to buy my first home and this type of video is such an inspiration for me when I finally get my own place and can make a workshop!
Please do dino thunder white helmet
Im really impressed frank!! Looks so good!!!
Love how he's a low-key car guy the injen sticker in the tool box the inter cooler and bumper reinforcement right inside the garage door glad to see its not just me who has a love for more than just 1 thing
Well done sir! I'm using the 3rd bay of my garage as my maker-space (well... 1 of my maker-spaces!) 😂
This workshop is very cool
Awesome!!!
you have a really slick workshop setup frank. Enjoyed this video!
Nice set up! I would like to see a video on that 3in1 printer/laser/cnc engraver you have there if posible. Thanks
You have really inspired me thank you
amazing workshop !!! well done!
20:10 best moment of the whole vid
this is so cool to look at. just watched your first video a few moments ago. Got myself my first printer this month and I´m already knee-deep in the 3D-Printing-Rabbithole and I LOVE it :D
Can you do a video on what filaments you recommend?
Great job 🙂
just next level setup
Congratulations on your workshop. looks awesome! as for your air compressor noise - I put my compressor outside in its own little insulated, shed-like box. The shop has more room and it is quieter. until I fire up the angle grinder.
Love the setup 👌
That's awesome man!
I need this so bad, I'm in awe 🤩. Congrats bro , hard work pays off 👏
I would have a whole home surge suppressor installed in the panel for that extra layer of protection with all of those printers. Amazing set up, hoping to get my second printer soon.
Nice job. You’re good at what you do. I certainly don’t have the patience to do it but I do like to look. For me it’s the post work lol. Great space.
loving the setup! and seems like everyone is going to NC nowadays but so cool knowing you were a jet troop. Im in joint base charleston crew chief.
amazing!!!
Amazing videos as always frank!
Nice set up Frank
Bro that is so sick your awesome I hope I can be like you one day
Wow Really looks good! Wish I had that much space ^^
setup is beautiful, I suggest getting an air purifier for the printer room if there already isn't one to help with the VOCs
Your shop is awesome! You could replace that "treacherous " ladder with those insulated attic ladders at lowes or home depot, they fold up into your ceiling.
Was here at 75k and the vids just keep getting better 😁
Love those Harbor Freight magnetic bars, I've got a few on my bench and it's nice to be able to easily stow/pull your tools but you're not a fan of stuff like pegboard
Looks awesome, all i have is a spare bedroom ;-)
Congratulations Frank! I convinced my engineering teacher to let me build a iron man helmet as a project!
Nice genesis at 1:25. I have a 2015 3.8 with the same fog light delete.
@FranklyBuilt
10 ай бұрын
Thanks. It doesn’t have a fog light delete. The 2.0s didn’t have fogs
17:36 it's a very common mistake to think that the little charcoal filter inside those resin printers acctualy filter the air. They don't! They just filter out smells. Not fumes
Nicely done 👍
Those dog matts work great. Way cheaper then the wham bam matts.
Damn that jab at the AnkerMake M5 though. I feel attacked, lol.
Why is no one else watching? Edit: I only commented because when I clicked on the video, I was the only one watching
@fastgrimjay3092
11 ай бұрын
There we go
@blazinfuelcan
11 ай бұрын
idk
@cooperweller5472
11 ай бұрын
I am
Next change out garage door for a roll up then fir out for more shelving space. 🤔
With the scrap filament/removed print supports etc, you can use a solvent in a jar and put those pieces in to make a plastic paste for filling etc. Pretty sure Punished Props did it and talk about it in one of their videos
Great video, I love 3d printing but also like a nice rack 😂
absolutely insane, it's looking good, also I have a helmet request, if you haven't already do you thing you could make Deathstroke's iconic helmet, he is one of my favorite dc characters design wise. pls...
Loving the new intro!!!
Would be great to have a Jarvis arm at this roof
The workshop looks awesome! Just bought my first 3D printer a month ago and am working on a full armour set for a Clone Trooper. Just going for something massive straight away. Have you got any advice for doing something like this?
Just go ahead and print your labels and hold them on with magnets. ;)
@FranklyBuilt
11 ай бұрын
Smart!
Still so jelly about your setup man. With the amount of printing you do, have you thought about getting a shredder? They're expensive at about a grand but considering the scale of your production it may be worth considering
Bro the hexagonal lighting and fixtures… I’m a sucker for hexagons
The workshop looks awesome! Where do you do your sanding and what do you do to control the dust?
Love love love the video! I am tackling the same project for my print farm in my garage right now. What tabletop leg solution would you have for a gigantic format printer (I'm receiving a 5 toolhead Prusa XL in about a week)
This is great! Well done... although I get sad whenever I lose garages to hobbies :-D (which is always)
Wow dude you must be so proud!!! I know I would be. It look awesome man. So do you do all of this as your proper job or do you do something else too? I only ask because I'd love this stuff to develop into being a full time job for me too and if I know you managed to buy your house and do all this from printing/ painting etc it would be very inspiring to me
Nice workshop! I wish I could do something like this. Unfortunately living in expen$ive CA means my printer is in my spare room!
Would love a link to that repair kit or something similar.
Poor Ankermake, it and it's M5C brother should have been more popular but bambu stole their thunder. Oh well. Sweet setup frank! Hope your security system is Mossberg and Smith and Wesson here in America.....
An organized shop makes all the difference in the world. Of course I don’t know why someone needs 25 printers but then again people ask me why I have 25 rod/reel outfits in my bass boat 🎣. I just tell them it’s to keep the 4 different sonar units company … 😳
Bro I wish I could be like you I am trying to save up for a bamboo lab printer i don’t think I will be able to get it but there is no shame in trying but you are soooooooooo cool thank so much for the inspiration
Yo I'm in North Carolina as well
That looks great. Do you happen to have a link to the shelving legs you got from Amazon for that butcher block shelf?
YYYIOOOOOO NICCEEEE❤❤🎉🎉🎉
Why not make your own filament factory? 13:39 probably would just need a hot end with a 1.75 nozzle, a tub, or a chamber to melt down the failed/supports and then a way to reel the brand new filament on to a empty spool.🤔🤔🤔 Edit: just looked it up its called pultrusion!!
My college had a Lulzbot 5 and I got exceptionally good with it (2019ish). They asked me to write the bible on it for future students! Now I am trying to get into it for myself but have home restrictions (toddlers, Border Collies, no garage, and live in Northeast). Looking to get a K1 Max or Neptune 3 Max or P1S or CR-M4 so I can print helmets. Any suggestions on making a corner of a well trafficked room into a small shop?
Im pretty new to the 3d printing world. Do you share your printer settings for some of your machines? If not where is a good spot to look?
I’ve been trying to 3d print stormbreaker but I can’t figure out the right settings for the size
My garage is hot as balls, and I'm in Georgia. But I rent so ill suck it up! 😫😫
What about a UPS? I bought an APC 1500va just for my Neptune 3 Max after the last power outage killed my print.
@FranklyBuilt
11 ай бұрын
I would need a lot of them haha
@ConnersWorld
11 ай бұрын
@@FranklyBuilt No kidding! Love the setup!
can you do a video on a ender 3 vs 2 with a glass bed?
@FranklyBuilt
11 ай бұрын
No I’m sorry. That printer is kinda old and dated at this point.
1:47 So does hot weather not effect printing as much? I would think it could get pretty hot. Computers need to be in cool spaces and I know printers aren't computers necessarily but Id figure hot temps could be too much
Can you please make a aquaman trident please 🙏🙏🙏
I have been printing for a month now and you have inspired me to print a iron man suit since you first showed it. It is ike a childhood dream to have a suit like Tony Stark. I have been watching your videos and learning all I can. I have a couple questions and I hope you can answer them. First where can I get the stl for the full iron man suit that is a quality file? Second can I size the iron man helmet the same way i would any other helmet using a caliper? Lastly securing armor cosplay pieces to you, what is used as far as velcro, printed clips, hot glue and other things?
Do you have a link for that little tool box?
Looks really awesome!! :) Isn't a bit dangerous to store those spray paints in a place which can very hot? As far as I know it's not recommended and maybe even dangerous. Please correct me if I am wrong. :)
@FranklyBuilt
11 ай бұрын
It needs to get over 150+ degrees. Normal 90-100 degrees is fine
The only thing I wanna ask is what cosplay magnets should I use for helmets and cosplay
pls make upgraded titan cameraman head and jetpack