My DIY 3D Sculpture Pantograph for under $50
Тәжірибелік нұсқаулар және стиль
I built a pantograph or pointing machine to resize sculptures by hand. I used materials on hand and gathered from the junk yard and thrift stores. I spent less than $50. Thanks to Spencer Schubert of "Sculptor's Apprentice" KZread channel, and Jason Arkles of "The Sculptor's Funeral" blog for their insights, support and recommendations. stay tuned as I will be adding more videos and information about this tool, and show it in progress while I make sculptures. Come say hi on facebook at / christopheryanceyart
or check out my art www.christopheryancey.com
and don't forget to subscribe so you don't miss any of my projects.
Пікірлер: 70
master!!!
MAGNIFICO
wow - you were very inventive in creating this!
This is really cool! I'm planning to build a 1:1 pointing machine after watching the Sculptor's Funeral video, and I'll definitely come back here if and when I need to scale up any pieces. Thanks for showing how (relatively) straightforward the principles and build can be!
Wonderful!!! Thank you for sharing!
Good Job. Thanks for posting !
Thanks for sharing your project with us man. It looks amazing. I'm sure you're gonna inspire many people to build their own versions.
@arthardware5560
6 жыл бұрын
go for it and I hpe they let me know how it works out for them.
Incredible!
Great Job - Impressive!
Well done pal 👍
Отлично! 👍Респект мастеру!
гениальное изобретение!
I really like it, great! I built me one sort of like yours, but I couldn't get it accurate enough and I had other work waiting, so I left it. I think I'll redo it one day. If you'd put something like a loop too for clay in the receiving end, you could scrape the clay into form, following the original. At least that's what I saw others do... That would save a lot of time. Any chance of you emailing me that page or selling drawings? I thought of making a copying saw that works like a pantograph too, but as I'm very unexperienced in metalworking, I'll leave that for now. But this pantograph mechanism sure comes in handy.
You should continue these videos!
Very nice.
Thanks bro nice work!
great work!buddy
Simple and very ingineous.
It would be nice to see you using it. Do you have a video sculpting with it? Great job!
PARABÉNS!!!!!!
good idea for triangle and tangant
thanks
You're a genius
Genius! I'd buy one if there's an evolved version.
nice done...
Smart idea, you could sell them.
Fantástico,,,,,
Great presentation.After looking at it once I thought that I shall build a same machine. But now I still did not understand if this precise machine you made is only capable to do one scale-up ? Because the 3 bicycle wheels positions cannot be spaced differently. Would one have to build another machine for each different scale,?
와우!
Olá meu querido onde posso comprar os ponteiros ajustáveis
Excellent, you really are above industry standard thinking, you should have been around in the days of great inventors, I'm sure you would be a household name. Keep up the innovative solutions my friend, nice video.
@arthardware5560
7 жыл бұрын
Comments like these make it all worth while. thank you!
Brilliant All the best from Liverpool England xx
@arthardware5560
7 жыл бұрын
Thanks Phil, I'm just getting ready to sculpt this morning. Hope you're staying warm, it's freezing here.
@karelseelt653
7 жыл бұрын
Phil Bimpson B
@wagdyziada4503
5 жыл бұрын
I like Liverpool FC, Mo Salah, wish they win the UEFA CHAMPIONS.
Amazing!!!!!!!!!!!!!!!!!!!!!!! Work😇😇😇 i like it and hope we collaboration later
thanks for posting. great job. your explanation of the measurements needs to be simplified though. I watched it about ten times and still am guessing. if my distance is 60" the center point is 20" from pivot? with a 20" pointer? then 40" to outer pivot ? with a 40" pointer?
Exactly what I was searching for! How can you put a tool like a drill in top?
thx, I know how kids can mess up your video... great :)
Good 👍 Handy
I love youtube without editing.
You look just like an Italian renaissance monk.
@arthardware5560
6 жыл бұрын
Thanks for the laugh, with the hoodie on I and my involuntary hairstyle, I guess I do.
Oh nice so the turntable provides a third axis? I'm still not sure how it works because I don't carve stone. Is it carving the stone? Is it for measurement? Either way pretty impressive. Thanks for your explanation.
I do believe that a device similar to this built most of ancient Egypt.
Where i van buy this pantograf
Do.you have any plans for sale
hey! Are you still working with this? How goes 7 years later?
Is it possible to put a router on this pantograph
@arthardware5560
7 жыл бұрын
I wouldn't put one on this particular machine as the pointer arms are not sturdy enough, a dremel tool or a hot wire foam cutter yes. I would have to make the pointer arm stronger to get a router on it, but it could definitely be done. the other thing you would have to change is the counter balancing weights to account for the weight of the router, and make the pointer tip on the smaller piece a sized down version of the router bit, so you could maintain accuracy. keep the questions coming! thanks
A Dremel and a block of foam would get the copy done faster 😋
Amigo, show demais, sou escultor e achei o que precisava, como faço para conseguir algumas medidas do equipamento?
Do you have the plan of that pantograph?
@arthardware5560
7 жыл бұрын
Nope not yet, I'll break it down and make a how to video with plans probably this fall. (sorry, I'm swamped with commissions ;))
@edmanalves9623
7 жыл бұрын
I'll be waiting for the video.
Can I have your website I like to send email.
Hi I would like to know , if you are still in business, and if there’s a way to comunícate with you , I have a friend that wants you to build one of this machines for him .
Hi ! Meeen this video is AWESOME ))) Thanks for this Great sharing )) its just your Camera Men either is drunk or just its Camera tooo heavy for him ,,keeps shaking and its terrible ))) get a Video stand or something and fix the Camera Body ))) because of this is ruined the Fantastic Tutorial Video ))) Thank you ,I am enjoying except the shaking my head ))))))) Appreciate!
Any chance you can post that email? I watched this 3 times, and there's just not enough info to build it and scale your items..
@enriquegaona8389
10 ай бұрын
Es suficiente con la idea que da el maestro. Usa un poco más tu cerebro. La idea principal está dada.
Selamünaleyküm Çok güzel SÜPER bir uygulama 👏 👏 ( TÜRKÇE ) ALT YAZI OLSA DAHA İYİ OLURDU 👍 ⁉ Like + Subscribe 👍
I stopped watching as soon as the crying baby
@arthardware5560
5 жыл бұрын
I understand, Life happens, but thanks for the comment, it reminds me that if i stop because something is imperfect I could really miss out on information or success that may come by perseverance.
@wagdyziada4503
5 жыл бұрын
@@arthardware5560 Sorry, for me I continuing watching, that mean how you are a good dad, thank you for sharing this wonderful experience.
@SMRo7
Жыл бұрын
@@arthardware5560 After you came back on screen and the kids were quiet, I was wondering what it was you did to silence them? And later after I heard them again, I was relieved to hear them again.
@arthardware5560
Жыл бұрын
@@SMRo7 Nothing sinister I assure you. you just have to look at my work to see how I feel about children. Kids are great we have six and they are my biggest source of inspiration.