My CHEAP 2003 SVT Cobra has BIG PROBLEMS: Hurt Motor!!
Turns out this cheap cobra just got a lot more expensive. Hate it when that happens! The cobra motor is hurt, so time to tear it out and figure out what happened!
Instagram: chris_sullyvan
chris_sully...
Boroscope: amzn.to/40rWtyo
Пікірлер: 626
Does anybody else hit the like button before watching?
@brianchambers5119
8 ай бұрын
Hit the like button, saw your comment😂, hit play!
@Huntinghogs
8 ай бұрын
Yep!!
@JNunez1994
8 ай бұрын
Yes, Chris is awesome
@ChevyS10LSUK
8 ай бұрын
Yeah, the title had me click the like
@mmid8960
8 ай бұрын
Hahahaha that’s a good one I just did that too
I don't mind the length of the videos I actually enjoy being able to sit down and watch something for more than 9 minutes
@S2NAZ
8 ай бұрын
I agree, and without all the shaky camera junk and click bait drama. 👍🏻
@johnc.9133
8 ай бұрын
Same here. I could watch a hour video easily!
@victorcorona8008
7 ай бұрын
This is facts just found this channel and it’s cool to have found a new project makes it cool having to wait for next video 😂
@jimmybeam66
7 ай бұрын
Same
The bell housing is cracked at the throwout bearing hole forward towards the bottom at 4:59. On another note, I love the project. Keep it up!
@tylerrobinson6158
8 ай бұрын
Wondering if anyone else seen that as well.
@bobbymccourt6794
8 ай бұрын
@@tylerrobinson6158I saw it also
@bubbadw60
8 ай бұрын
I was just going to comment this.
@PntBtrNjelus
8 ай бұрын
Came looking to see if anyone else caught it too.
@heefie8659
8 ай бұрын
add me to the list of going to the comments for this. I haven't even gone past that part yet to see if he noticed.
You're gonna need a bigger whiteboard for this one.
@ChrisSullivan69
8 ай бұрын
Lmao I was just thinking about that
@sleveille44
8 ай бұрын
Good one 😄
Damn, a cracked bellhousing..that sucks
@thedankteamexplores
8 ай бұрын
Came here to look for this comment
@dylanstadjuhar3954
8 ай бұрын
Saw that too..
@chitoBC
8 ай бұрын
was about to comment the same @@dylanstadjuhar3954
@tonydelgado6965
8 ай бұрын
5:03 I saw that too came to see if anyone noticed it
Nothing is ever too bad with knowledge, tools, the internet, and supporters. What may seem to be a mess, can overtime become a beautiful unit
Bell housing is cracked on the bottom.
@3rd_coast223
8 ай бұрын
This ^ is what i came here to say.
Man I've been watching back so many of your videos for the last 5 days, so much of a great content, so many great cars, your work ethics its on a different level 👌 thanks
@ChrisSullivan69
8 ай бұрын
Much appreciated man! 🤝
Poor cobra looks like it was rode hard and put away wet!! I know Chris you will bring it back to its former glory! Definitely needs some love! Bummer man but it will be like new when you are done!
It’s bad ass how many projects you take on at once. Been watching the channel ever since the cheapest cts v and the amount of vehicles you’ve had on the channel since then is crazy.much respect💯
@ChrisSullivan69
8 ай бұрын
Thanks for the support 💪💪
@J35Nate
8 ай бұрын
@@ChrisSullivan69 of course man‼️ love the amg btw.
Looks like a wild rides 8.8 brace system with torque box reinforcements. Clutch looks like a SPEC unit. Shes got some parts on her but shes def been driven in anger a lot.
Coming up on 50k, you’re finally getting some recognition for this quality!
@ChrisSullivan69
8 ай бұрын
Onward and upward 🤙🤙
Hey man!! Sorry to hear about the engine issues. I have done a ton of 79-04 engine swaps and with the hoist you have in your shop you can get the engine and transmission out in 4-5 hours from dropping it threw the bottom. And just bolt the k member back in after you take rhe engine out and you can roll the vehicle around. You will love unbolting those headers off the engine while sitting on the floor instead of in the car. Good luck with your build
Love the longer videos. I'm looking forward to watching you bring this back to its former glory.
5:10 the cable looks good but i just wanna make sure you saw what looked to be a crack in the bell housing.
@dustinsmith9822
8 ай бұрын
Yup. I saw it too.
This guys content has me constantly waiting to see what he’s doing next. Great stuff!
I'm addicted to this channel
Looking forward to the teardown and progress. The perks in parts surely help. Your content is real and not drama inflated and a key reason most probably keep coming back! Thanks Chris
Thanks for another awesome video Chris! I always enjoy them. Cant wait see this project mature. I also really enjoyed your mini bike video.
Level headed and mature approach to a surprise, if expect nothing less. Looking forward to the upcoming content, sorry that it's more than you expected!
This is going to be a long ride. And I’m here for it.
I also dont mind the long videos, watching you wrench on cool cars is better than any junk Netflix has to offer. Such a variety and you dont skip over the real stuff and only show the bling. Its good to see the down and dirty of project cars because thats what its all about. Keep up the awsome content that motivates us to get off our asses and work on our own junk..lol
@ChrisSullivan69
8 ай бұрын
That's what it's all about! Thanks for the support 🤙🤙
Yes! Needed this episode today! Love the longer videos!
Love your vids, I’m learning new things as you go , and it’s so motivational ‼️
I can’t wait to follow this rebuild? I’ve been antes to get more information on pulling my 03 Mach 1 motor and someday adding the cobra parts so this will be very informative and fun to watch!
Also, I just moved back to PA from NH. Figures I’d find you channel after the fact. It was lonely up there by myself, would’ve been nice to have a fellow mechanically inclined friend. And I do agree, it is nice and peaceful there with all the space, even though PA is still country, it feels like a big city now. Still not as bad as when I lived in Scottsdale AZ. That’s crazy busy.
I love your videos and the length of them! I’m dialed in the whole time.
Just came across you a few weeks ago. Top notch videos and tons of talent to do all work yourself and how great they turn out. Keep up the amazing work man
@ChrisSullivan69
8 ай бұрын
Thanks for watching!
Enjoy watching your videos , fun and funny but full of information with your great ways to explain things
Channel is good man, keep at it and it will grow. Been watching a bunch of the videos, love the cars you have, and I miss living in New England, at least till fall that is
just found the channel and following this build. Love it so far. Subbed!
I had a feeling from the first video that this thing was going to be a bigger project than expected. Don't be surprised when this car costs you two or three times what you estimated (just throw your wallet at it). New Sub here to get updates on the tear down and build up of this car. Good luck, sir.
These videos make my day. Thanks man!
Like everything else you’ve worked on Chris, I have absolutely no doubt this car will turn out spectacular 👍🏻 Looking forward to living vicariously through you here on you tube! 😂 Have a great week!
Love the channel 🔥. Im addicted, cant get enough. What u did with the 69 is amazing. Keep it coming.
CHRIS A GREAT PROJECT FOR YOU OVER THE WINTER !!! AND WHEN YOU FINISH WITH IT ,YOU'LL BE PROUD ,WITH ALL OF YOUR FINISHED COBRA !! KEEP THEM VIDEOS COMING !! JESSE VIA LAS VEGAS
Gonna be a great winter watching the master revive blue!!! Z06 prettiest violent car ever!!
Great stuff man, super informative. Looking forward to watching this rebuild. Ran my LS3 swapped GTO low on oil and found some shavings so working up the courage to open her up and see whats wrong.
@ChrisSullivan69
8 ай бұрын
Nothing to it but to do it. LS is not that complex
Can’t wait to see the build I’ll be waiting 🔥
Just went through the same thing with my 03. Rings and exhaust valves both were the culprit. You took this much better than I did…..look forward to more videos!
@ChrisSullivan69
8 ай бұрын
Sucks but you gotta move forward. Sounds like you might be able to get away with a reasonable cost rebuild as well
I’ve been waiting on this upload 🙏🏼
Looking forward to this rebuild. Cool car. Definitely needs some love but will be a fun street car once its done!
I love a good terminator build series!
Carnage! I love it. I know that it sucks but the education that comes from situations like this is priceless. Yes, I hit the “Like” button within the first five minutes. This is gonna be a heater! Can’t wait for the next video.
New subscriber here. Love this so far. Love how you have so much progress in one video. Keep it up. I like it!
@ChrisSullivan69
7 ай бұрын
Thanks!
This is going to be an epic project, can't wait for the entire process.
This video was dope, hype to see the carnage for the next one!
Your KZread videos on project car are the best on KZread you actually document like 90% of the actual build
@ChrisSullivan69
8 ай бұрын
Appreciate the kind words 🤙🤙
My favorite KZread channel at the moment
keep it up brother !! you're making my V6 proud.
Easiest way to tell a magnum…factory has a 4 bolt shifter plate and a magnum has 6. Also the rear end is piece together, torque boxes are hacked with an attempt to mend it. It’s an 8.8 with UPR uppers, Max Motorsport lowers, Team Z bracing. There’s a video on our channel explaining some of the issues. But! I like the beater versions, they’re fun to build and race.
Just a suggestion. Drop the subframe, engine and trans together. Seperate them, out the engine in a stand Put the subframe back in. From experience, it's a lot easier (In my experience) to go out through the bottom
@boosted_red8294
8 ай бұрын
I thought about that too although its another step to put subframe back in & then take it back off when replacing engine.
@jamesgeorge4874
8 ай бұрын
@@boosted_red8294 Ever work on one ? If you got a hoist, dropping the powertrain is WAY better. Just like a 4th gen F body......
I agree with previous comment...likely a SPEC clutch. Bell is cracked. Also, NOT a factory rear end. 03/04 Cobra's came with an IRS. That is NOT a factory IRS. Appears to be a welded Explorer or Mustang 8.8 rear-end with modified (Skinny Kid racecars or similar) torque boxes. Solid upper control arm bushings. Great control arms (upper and lowers). Aftermarket aluminum driveshaft. Rear looks beefy though (welds are pretty terrible) and the subframe looks slightly bent. Check for rear-end gears (3.90s were popular). Front springs are factory. Clutch cable is a non-adjustable OEM replacement. Upper pulley and billetflow idler pulley on the blower. Stock Cobra throttle body, unmodded EGR tree. Oil spooge on the piston tops could also mean a leaky blower seal. Check to make sure there is no oil on the blower rotors. Coming from the Cobra world, this car sadly has some issues.
Great Content! Can't wait to see what's next.
Can’t wait for the next video !🔥
Came to comment about what looks like a crack in the bell housing. I see I’m not the only one to see it. Love your videos.
New subscriber here. Awesome content bro fr fr been watching past 5 days 😂
@ChrisSullivan69
8 ай бұрын
Thanks for subbing!
Dude I randomly came across your channel when looking up mustang shit. First video I watched was you picking up this stang from my state. No not all of Jersey is like what you experienced getting it lol. I'm hooked and subbed. Love that body style mustang and the color is bad ass.........same as my 03 f250 v10. Can't wait to see where this build goes.
I enjoy this channel/content far more than almost all other car channels on the tube. Albeit far from perfect (due to piss poor sports teams & fords) but this is definitely my go to for sports/muscle car content! Keep it up Chris, you da Man! Oh just a suggestion, get a quality camera (not a GoPro/iPhone) for future content. It makes a big difference, IMO. Aloha! 🤙🏽
At least you kept your sense of humor despite all the bad news Chris.
love your advice for buying used vehicles. Sage wisdom young man!
bro I hit the like button as soon as I saw the office meme hahah. Good Luck with build my man! Will definitely be watching
@ChrisSullivan69
8 ай бұрын
Never gets old lol
Excellent video Chris. Looks like you have your hands full with this one. Time to "Tame the Snake" it seems as that's going to be a fun rebuild.
Killin it bro, the fleet is sickkk!
Awsome video... cant wait to see the next steps for the motor!
I know you will do this car right like u do always spot on love your work your a pro great job
Probably never got a head cooling mod. Drivers side head doesn’t get much coolant flow from factory which leads to high temps normally resulting in head tick/valve issues but can also fry rings after years of abuse which this car clearly had. Get the heads decked valves done do the rings and the head cooling mod. And if you’re on a budget I recommend 98-99 cobra cams they have more lift intake and exhaust duration so will make more power with more boost. Do all new gaskets and studs and a billet oil pump gears and you’re set. Take it out of the bottom by the way. Or else you are in for a nightmare.
Oh boy, you got your hands full! But I subbed cuz I can't wait to see her back on the road!
@ChrisSullivan69
7 ай бұрын
Thanks man!
Never seemed to idle smooth. I heard the miss the first time you fired it up. I told my son who was watching with me "That thing has a miss". I guarantee he knew and just wanted to wash his hands of the car because of it. But like you said, it has enough extras to justify the price so you did good. Can't wait to see the tear down!
Try a wet compression test. You said you looked at that car a couple years ago, if it’s been sitting for a while the rings may be a little stuck. A wet compression test will let you know if it’s rings or a hole in the piston/valve train issue.
@jamesgeorge4874
8 ай бұрын
First thing he showed was a cylinder leakdown test bro........
Great video as always man! I think I would've tried one thing before taking the engine out though. I'd put a mix of transmission fluid and WD40 in that cylinder to see if the rings were just stuck. Not exactly kosher but, worth a shot anyway.
Solid rear axle conversion cobras it takes away what made part of them special in my opinion
We have a problem??? No, you have a problem.....but I like watching you solve them. Keep up the good work. Please try a C5 Corvette.
Hey Chris just discovered your channel. I feel for you on the "something always goes way wrong" no laughing at you here. Good luck I can't wait to see you restore this awesome car.
first bud i’ve ever seen of urs smashed the subscribe good video
Been waiting for this upload since you first bought the car. Amazing video bro 🫡
i have an 03 sonic blue f250 7.3 which was my dream truck and the sonic blue cobra is my dream car to have the matching set would be amazing my truck is the last year of 7.3 and the rare color like this dream car you have . cant wait to watch this series and live vicariously through you with my dream mustang lol .
What you have going for you is you have a forged crank you have manly rods which you can just simply upgrade the bolts to arp 2000 and grab a higher compression pistons and a good ring pack Very budget-friendly Cobra rebuild
You have completely won if that trans is in the works man 👏👏 but overall priceless parts my guy 🔥💯💯
This mans everything is the stuff men like us love, and I'm working on getting for myself! I want some land with an old air strip and a hanger, then convert it to my own personal car garage and test strip. Very cool setup, and it gives me nothing but motivation! I've already looked for properties, and surprisingly, a lot of places are out here in Alabama. I love this content, and good luck with the build!
@ChrisSullivan69
7 ай бұрын
Go get it man 💪
@majikk9123
7 ай бұрын
@@ChrisSullivan69 Roger that!
Looks like the left torque box has a cracked weld also. I noticed it at 7:14 of the video. Define fixable but something to address for sure. Your right those they are notorious for ripping out. I reinforced mine in my foxbody wasn’t to bad of a job. But I still like the project ivy always likes the 03-04 terminator cobras. Ill be looking forward to following the build. 🚙💨
I have an 03 cobra as well, really looking forward to you rebuilding/fixing the 4.6 DOHC motor!!!!
Awesome car to see come back to life. I love this
Your a smart guy Chris! I'm tuned in with you on this build for sure. I'd love for you to coyote swap my 03 mustang gt. Ty for posting! God bless you brother
Caint wait for this build is going to be 🔥🔥🔥
Longer videos for sure chris we love the longer videos if i am being honest i would watch an hour long video minimum 30 minutes.
You have great content.To help a new car hobby person to understand how to fix.
Just think of all the cool stuff that you get to do now 🍻 By the way cover that left fender. You covered the right one and started working from the left one 🍻Looking forward to seeing what you come up with for this project. 🚙
Great content. Just came across your channel. Thinking about picking up terminator again. Just finish my top to bottom fox rebuild. Overall, gotta say I'm impressed with your positive attitude. As you said, it's the "name of the game" when buying used performance vehicle... especially one's with signs of a hard life. Great advice on how not to be a d-bag and hold yourself accountable. Look forward to your progress!
@ChrisSullivan69
7 ай бұрын
Appreciate it man!
I always hit the like button before watching!😂
I had a beautiful black 2003 Cobra. Added a Whipple with all the supporting mods, and swapped out all the rear IRS bushings with Full Tilt Boogie Racing Delrin bushings. I owned it for 8 years, garage kept, and only had 22,000 miles on it when I sold it. The moron I sold it to swapped the IRS with a friend's 8.8" solid axle out of a GT. He then completely ruined the car by treating it like hell. I truly hope someone saves it someday like what your doing.
Nothing to laugh about it. Its great content, I wish I had the half of the skills, knowledge and experience you have. (And garage so I dont work on my stuff in the driveway) I learn a lot from you! Keep it up.
I noticed your tee shirt from Suck Bang Blow Murrells Inlet SC. We go down every spring for Harley week and camp at Lakewood Campground. Even though I don’t have a Harley as of yet but maybe a three wheeler Harley down the road. We love going down and checking out all the Harley’s. Love your content bummer about the Mustang’s engine but look forward to seeing you work your magic.
good work man, you got the right mindset for this car 💪
@ChrisSullivan69
7 ай бұрын
I appreciate that!
Sorry for your pocketbook but I’m looking forward to the project! Dealt with my crank pulley 2 years ago, not sure how but the “forged” hex bit broke off inside the pulley. Ended up taking a brass punch and just kept hitting the ears of the pulley and it finally popped loose. I’ve seen a few flywheel tools to help keep the flywheel in place when the engines out.
Thanks for the content loved it.
@ChrisSullivan69
8 ай бұрын
Glad you enjoyed it!
Representing SBB shout out from South Carolina
Greetings Chris, well it looks like it's going to be a long build., great for content. I wish you well on this one...
Your videos are better than watching Netflix 😂 keep it up.
These videos are nice to wind down to at the end of the day. Chris looks like he may have been prior Military.