I had a jack failer as well, and yes it was operator error as well!

How were the led drl lights next to the fog lights? Do you recommend them?

Every blow off valve must be serviced at every oil change.

Do you run the oem 6gti injectors or any aftermarket ones? Generally how did you prepared the fuelling system from lpfp and hpfp to injectors bedsides ethanol system for the big turbo setup?

@dannyhampton

3 жыл бұрын

Hello, I ran these injectors www.hamptontuning.net/product/mk5-mk6-mabotech-high-flow-injectors/ This lpfp (stage 2.5) www.hamptontuning.net/product/audi-vw-performance-lpfp/

Are the golf R side skirts you put on OEM? Or aftermarket non OEM?

@dannyhampton

4 жыл бұрын

They are ebay oem lookalikes

I have a mk6 engine is blown. Trying to get another can you send tips on where you got the work done thanks!

@dannyhampton

2 жыл бұрын

Call A & A junk yard. Where are you located?

Are you running a short shift kit? If so, which one?

@dannyhampton

2 жыл бұрын

Yes, deisel geek

Did you ever run of the shelf tunes or just maestro? If you used off the shelf tunes how did they compare to custom. Would you recommend custom tuning on a stock gti or go off the shelf? Thanks

@dannyhampton

5 жыл бұрын

Yes I started with eurodyne base files. Custom tunes are soooo much better because they are based off you mods. On a stock gti a custom tune will not get much more then a ots. I'm running mabotech custom tune. If you want one yourself, contact me. 👍

@westmountainmotorsports

5 жыл бұрын

@@dannyhampton so if later on down the road I wanted to go custom, should I just buy maestro for custom tuning and only run their base stage tunes? Or buy another companies of the shelf?

@dannyhampton

5 жыл бұрын

@@westmountainmotorsports yes, buy the eurodyne cable. You can buy from me for free shipping. It comes with stage 1 and 2 and is pre registered for maestro.

Are you running stock turbo?

@dannyhampton

4 жыл бұрын

It is mabotech m500. Available on my website

What kind of turbo you have in your car ?

@dannyhampton

4 жыл бұрын

Mabotech M500 Can be found here: www.hamptontuning.net/product/mk5-mk6-turbo-kit/

What did you dyno at??

@dannyhampton

5 жыл бұрын

440whp... but more power now. Probably 450whp+

Every mod on my GTI has been a rough patch...

@dannyhampton

4 жыл бұрын

Exactly lol

@mrch1ll773

2 жыл бұрын

This needs to be a sticker 😂

Running a bov will not give a check engine or mess with your maf because it recirculates right back into the turbo and does not go past the maf

@dannyhampton

4 жыл бұрын

Bov does not recirculate. A diverter valve does.

@elplopplo

4 жыл бұрын

Diverter valve and bov are the same thing, the diverter valve feeds right back into the turbo so a spacer or relocation kit will not give any issues

@dannyhampton

4 жыл бұрын

@@elplopplo you are saying so many things that do not match up. A spacer connects to a dv to make it let off pressure atmospheric. A relocation kit can let you run a dv or BOV. If you want to run the release back to the intake that is your choice.. Yes I know they are the same thing. You could open up a dv to atmosphere by not rerouting as well. But car will eventually notice