Outer sleeves didn't come about until the 1970's. I've been collecting since 1962 when the only protection was the shrink-wrap. I was in the military stationed in Europe 1970-74. Records in the base exchange were pressings from Germany, Netherlands and UK. The Greman discs came in plastic sleeves that were perforated at the rught edge -- just tear at the perforation and you had a nice outer sleeve. While stationed in Britain I bought plastic outer sleeves for my whole collection from W.H. Smith & Sons that I still have in use. Then in 1983 a friend worked delivering telephone books that used clear plastic bags to deliver the books. My friend had quite a surplus of bags after making the deliveries and passed the surplus on to me. That was 38 years ago and I still have plenty that haven't been used.

Great list! Here's an additional tip for those Vinyl Storage Solution outer sleeves - Insert the jacket so the spine is in the same side as the sealable flap. This accomplishes two things. Number one, you can read the spine, undistorted from the seam while stored on a shelf. Number two, you can store the vinyl itself in more tradition manner with the pocket opening on the side of the jacket.

Great tips as always. This stuff may seem basic to long time collectors, but with so many new people taking up vinyl, it's a good idea to revisit these topics.

@Channel33RPM

3 жыл бұрын

Thanks for watching!

I never thought to wet clean brand new records till I saw your video. Thanks for the tip, Frank. Keep pumping those videos!

@Channel33RPM

3 жыл бұрын

Thanks Terry! Glad you found some value in the vid! I find that cleaning new records can make a big difference (some more than others, of course).

Great list. I own a few of these and swear by the Zerodust and the Zerostat.

My essentials as of now: 1) The Thunderon Conductive brush to reduce static. I always start out brushing the side of a record I'm not going to listen to, and then the one I'm going to listen to. Same when I flip sides. Plan to add the Furutec Destat III later, but that's quit costly. 2) The Argon Audio BR2 carbon brush. The Thunderon brush doesn't work well for removing dust, so I use this at every spin as well 3) Argon Audio stylus brush, the stylus gets a brushing quite often 4) Inner sleeves essentially mofi-like. Ran out this week and they are no longer available... Looking for alternative 5) Outer sleeves. Using gatefold sleeves even for non-gatefold releases Haven't got to it yet (only had a turntable for a few months) but for deep clean, I think I'll rely on out-of-house service. I found a company that offers cleaning with a ultra sonic cleaning machine. I'd probably ruin my records if I try something with fluids myself

I still have my original Discwasher I bought in 1977 in the box. Also the Spin Cleaner & Onzow Zerodust. Works for me!

Awesome list. Always delivering the goods, as Halford said best!

@zephead64

3 жыл бұрын

Megatron, Goliathon!!

@Channel33RPM

3 жыл бұрын

Slipping in a Halford reference, Love it! Thanks Guru!

I used a Discwasher brush for 40+ years now; I’ve had others but I keep going back to it. I found a second one at a yard sale and snatched it up, even though I’ve never worn one out. I use the Onzow but keep an eye out for residue, and more likely to use a stylus brush instead. Don’t change inner sleeves when they’re album-specific. Outer sleeves only when I’ve bought it new or it’s a valuable copy of something. Pro-Ject record cleaner because the Spin-Clean was messy and you end up cleaning some records in dirty solution. Found no need for an anti-static gun - my record playing obsession just doesn’t go that far. With that said, I would add that a good microscope is essential to setting up your cartridge and checking your stylus from time to time.

When I mix a solution for Spin Clean in a clean SC tub, I siphon off a couple of ounces of solution into my old Disc Washer G4 bottle which had been emptied many years ago. I use an "Acrylate' machined acrylic platter from Pro-ject on my turntable mainly for the high mass and density, but one other advantage--my static problem disappeared. I live in the high plains with ultra low humidity and static is a major issue. With the felt and metal platter more than once the static buildup was so bad there was a spark going from tonearm to my finger along with a pop which I know was not too good for my system.

You hit all my essentials and I have all of them, including the original Discwasher brush, fluid and static gun! I purchased them in closeout sales back in the day.

@Channel33RPM

3 жыл бұрын

Man, those discwashers last forever if treated well. Thanks for watching. Frank

Basically you covered everything that I also use, maybe some different brands etc. I agree with you on the spin clean, I use that for al my vinyl new & old.

I just purchased a leather turntable mat from Jake’s turntable mats. It is deer hide and really seems to help minimize static and may even dampen some external noise. I fully endorse your list and use all of them. I get more crud off new albums than my older albums when using the spin washer! Remember when All the disc washer items came in one kit, including the anti-static gun?? (Late 70’s early 80’s)

@iggy9955

2 жыл бұрын

I have antistatic brush and if is record new in collection and fingerprint all over record, good all wather and clean liquid and record is like new.

I'm surprised at how many people don't consider static elimination a main component of their vinyl playback. It resolves so many problems. Great vid Frank.

@Channel33RPM

3 жыл бұрын

Thanks Chris. Static is the enemy.

Great Video Frank. I agree the Zero Stat is worth the money, a very effective tool.

The Record Butler. I love this little doohickey, and I’m stunned no one has thought of it until recently.

I’ve said these things before, but here they are again: Record sleeves: I only use Diskeeper Ultimate sleeves from Sleeve City for my records. Yes, they cost more, but they’re smooth as silk, and I’ve never had a problem with them scuffing or scratching my records. Sleeve City also has their version of the MoFi sleeves if you’re interested. Outer sleeves: I use Collector Protector resealable sleeves. Unlike you, Frank, I place my records back into their outer sleeve. This protects the outer sleeve, and when the sticky strip goes bad, all it takes is one swipe with a glue stick and you’re back in business. I just recently purchased an anti static brush and wished I had done so sooner. So if someone is reading this and doesn’t have one, I strongly suggest that you get one. It alone will make a noticeable difference in cracks and pops. To clean my records, I still use the tried and true soap and warm (not hot or cold) water method. There are several videos here on KZread that demonstrate the process. You may want to purchase a set of label protectors. But if you don’t, then make sure you dry off the label completely first to prevent any puckering up or loosening around the edges. I’ve been cleaning my records for some time now using this method, and my records are cleaned without any problems. This is particularly a good tip if someone can’t or won’t buy a Spin Clean or other record cleaning device. I wholeheartedly agree about using an Onzow Zerodust for cleaning your stylus. I have tried cheaper ones that are out there, and nothing that I’ve tried has worked as well. It’s worth paying the extra bucks IMHO. The cheapest and easiest way to take care of static is water. Yes, water. I have found that if you put water on your record using a spray bottle, the light mist does NOT damage your stylus or record. I’ve played my records this way for some time now, and cracks and pops disappear (unless it’s due to damage on the record, which will never go away). You didn’t mention record storage. I store my records in the small boxes from Walmart. These are good, sturdy boxes, and they can hold up to approximately 75 albums, give or take. The best thing is that they cost well under $2 each, so they won’t break the bank. I hope that these tips are useful!!! Always enjoy your videos, Frank!!! Keep them coming!!!

@Channel33RPM

3 жыл бұрын

Thanks! Good call on the storage. I miss the days when milk crates fit record perfectly!

I can’t imagine not using inner and outer sleeves. It makes maintaining my record collection so easy.

@Channel33RPM

3 жыл бұрын

I agree.

Nicely done recommendations!

Ultrasonic record cleaning opens up the sound like nothing else. Huge upgrade. Blows away any other cleaning regimen.

@Channel33RPM

3 жыл бұрын

I will have to look into an ultrasonic cleaner at some point. Thanks for the comment.

@alanarakelian5021

3 жыл бұрын

@@Channel33RPM Yes. I have a DIY ultrasonic cleaner that has yielded nice results. The Degritter cleaner is reportedly the gold standard but pricey at $3,000.

You always leave me wanting more! Love your videos. Keep up the great work.

@Channel33RPM

3 жыл бұрын

Thank you. More to come!

I bought a VPI like 12 years ago, and that's my "go to" cleaner. Amazing what it can do.

Hi Frank, great video again. The RCA Discwasher brush is a Chinese made poor clone of the original. The Groovewasher is also a clone but not bad. Local store in Australia said it cant use directional cloth because of design infringement rules, don't know if its true, could be. One word of warning with the SpinClean: clean the pads very regularly because if you clean a really dirty record with it it can have embeded grit in the pad which can badly scratch records. I use VinylStyle with SpinClean fluid because of the brushes it has but dont its fluid because it leaves residue. The Milty ZeroStat is very good but there is an equally good product that is much lower prices: Ionic Electronic Candle Lighters. Enjoy the music

Great video again Frank. I'm gonna have to get some of those double outer sleeves!

@Channel33RPM

3 жыл бұрын

Thanks!

The disc washer is all I ever used in my radio career. Our station engineer mixed his own record cleaning solution with 99% alcohol and distilled water. Today I use the Groove Washer combo package with brush, solution and stylus brush. The Onzow is just too dammed expensive for me so I use Moongel damping pads.

@Channel33RPM

3 жыл бұрын

Good call! I find the moongel works just as well as the Onzow, and you are right -- at a fraction of the price.

Love your channel! I have the whole boxed set of Discwasher products including the stylus brush and red Zerostat gun! Love it all and looks so try in the box!

@Channel33RPM

2 жыл бұрын

Very cool. Thanks Matt!

My zero stat broke. Miss it so much. Came from a 70s or 80s era cleaning kit I got from my dad. Brush, solution, stylus brush. Looked at replacing it or getting another of those old kits, and man prices are crazy

@Channel33RPM

3 жыл бұрын

Those cleaning kits are great!!! Here's hoping you find a replacement.

Great list and I live in western Canada so a Zerostat is a must have.

Good vid, Frank! Yes, tons of static here in upstate NY! Especially when I use my 70's Discwasher on a record. Like popping corn! I just ordered an arc lighter after seeing comments here. No big loss at $7.50 if it bombs out. I had a big SpinClean session yesterday here. I do that when it rains mostly. Love that device.

Dry cleaning: audio quest anti static brush and a sticky roller Wet cleaning: groovewasher fluids with ragcompany eagle microfiber applicator Sleeves: vinyl storage solutions

A quick wet clean with just distilled water will help with static.

I ordered some inner and outer sleeves from VSS because of your show. I love them. The double pocket sleeves are the best. Great show as always.

@Channel33RPM

3 жыл бұрын

Thanks Jamie. Those are my favourite sleeves as well. Frank

Great list of essential items. When your collection grows it's also nice to have alphabetized record dividers to quickly locate the album you're looking for and it adds a nice look to your vinyl storage shelf.

@Channel33RPM

3 жыл бұрын

Dividers sure help me find what I am looking for. Good call!

I have to have nice inner sleeves like you said, and the outer sleeves of course. stylus cleaner record cleaner is a must for me! Great video my friend. I've heard a lot about those sleeves with the extra Pocket on it to store the album I'm going to have to check in on that man!

I love all your ideas that you use I pretty much use the same thing but I have started using my own solution it seems to work so much better than the stuff that I used in the past I love that gun it works great And The sticky bubble I always call it works great it's a quick fix but I do like to use to clean the stylus once in a while is Distilled water on a brush it works awesome Great video keep on spinning 😛🤘

Believe it or not Frank, this is what I found works for me. I clean my records with dish detergent and water. And that wet washing even gets rid of the static. I never had a problem with the paper sleeves the records come in.

So cool Frank thank you for sharing I do listen to music that on cd I use a cloth to clean them . Thanks for all you do I a fan of your videos . Landon

I use a deer leather mat with the smooth side down unfinished side up I've noticed no static except some spatter vinyl. I also use antistatic inner sleeve .

@FelixtheMetalcat

3 жыл бұрын

Gr8 product, I have the same and was shocked at how much better the entire record playing experience is.

@Channel33RPM

3 жыл бұрын

I hear a lot of good things about those leather mats. I will have to try that at some point. Thanks for the info. Frank

@FelixtheMetalcat

3 жыл бұрын

I have cork, acrylic and leather Frank and the leather is my favorite.

use most of them but dont have a spin clean great video keep them coming

I have all the cleaning products you have. Use new paper sleeves from Big Fudge. Great product breakdown review Frank!

@Channel33RPM

3 жыл бұрын

Thanks Lawrence. I am not familiar with Big Fudge. I will look into that.

I pretty much use all the same stuff, other than the Spin Clean. I find the Groovewasher fluid works well when i need a deeper clean.

@Channel33RPM

3 жыл бұрын

Groovewasher seem to always knock it out of the park!

I live in dry Colorado and the Milty Zerostatic gun makes a huge difference.

Great list. Makes me think I need to update my stylus cleaning and have some additional record cleaning solutions on hand. Also the zerostat. I have held off buying one. Thank you for the recommendations. I have tried many products you have reviewed and agree on the spin clean. In Ohio and ordered the inner and outer sleeves from Vinyl Storage Solutions. Fantastic products and great prices. Reminds me…. I owe the VSS team a review. Thanks Frank!

@Channel33RPM

3 жыл бұрын

Thanks for weighing in, Joe!

I clean my stylus after every session (1-2 records) I have the little brush. I also have a bottle of stylus cleaner with its own, nail polish type brush. And finally a Zero Dust type of product.

Love the list and use all of them but the spinwasher. Have been looking for a solution for that, but really want a more automated system than me pushing it around in a circle.

Also essential- an accurate digital tracking force gauge. The Zerostat? I’ve owned mine since the 80’s. Completely essential.

@NateEll

2 жыл бұрын

@Taco lucky

@crusheverything4449

2 жыл бұрын

@Taco - You use a lint brush on records?!!

Hi Frank. Thanks for this video. It'll help me a lot.

@TheVinylGuru

3 жыл бұрын

Hes the best!

@Channel33RPM

3 жыл бұрын

Glad you found some value in the video. Douglas. Cheers, Frank

Great vid as always tks Frank.

@Channel33RPM

3 жыл бұрын

Thanks 👍

I've been using outer Sleeves from Crystal Clear Bags in Ontario Canada with an adhesive seal

RE onzow. Blue tack works just as well, IMHO. Use it on a $2K MIMC* cartridge. Agree on inner and outer sleeves (Mofi/RSL), but not the resealable version. Any adhesive will eventually turn into a mess. A wet cleaning machine (Project RCM) while pricey, is essential, IMHO. Even thinking about an ultrasonic bath, but may adapt something available cheaper for other application and re-purpose.

New subscriber here; I ran into your channel a couple weeks ago and had to follow. I've been accumulating* vinyl for over 50 years so of course I want to see if you do what I have been doing to keep it alive. I used Discwasher for years and yeah, the new RCA version sucks big time. I may have to grab the one you recommend here. Stylus cleaner -- absolutely. Good inner sleeves -- check. I only use outer sleeves on records with covers that can catch and tear on neighbouring albums. One thing I have never ever done is use a cleaning machine. Everyone says they work but I just cannot bring myself to do it....OTOH I've never needed to buy an album that was so grotty it needed that kind of cleaning. I am willing to be convinced, though. I do use an anti-static brush though, religiously, every single time an album gets played. *I use the word "accumulate" because I don't consider myself a Collector. I buy vinyl because I play it; I have sold some things for very good prices but that is not my motiviation.

@Channel33RPM

3 жыл бұрын

Welcome to the channel Deb! I like how you differentiate between collector vs accumulate (or accumulater?). Makes sense to me. Have a great week. Frank

Great list of essentials. I love the outer sleeves with two pockets. Man, I am going to start getting those. I would add a cork turntable mat. For me, it has been helpful.

@Channel33RPM

3 жыл бұрын

I do love my turntable mat. Thanks for the comment!

Great video Frank. This kind of info is really helpful for someone like me who is getting back into vinyl after about 30 years. I started getting back into vinyl over the past two years and some of the things you mentioned I used back in the 80's and 90's like the disc washer. I also use the groove washer brush and fluid now since my old stuff is long gone. I don't currently have a stylus cleaner but that sounds essential for sure so I'll put that on my list. I don't currently use the inner sleeves but I can see a benefit there as well. I probably won't purchase outer sleeves at this point because I don't have a huge collection yet and I don't really have trouble keeping the album jackets in good condition. I don't have a lot of problems with static where I live so I don't plan getting a static gun. I do use a carbon fiber brush, but mostly just to dust off a record that has already been cleaned previously and just needs a quick dust off. Thanks again for the tips.

@Channel33RPM

3 жыл бұрын

Welcome back to the world of vinyl, Neil!

Great tips as always, Frank! I use the VnylStyl cleaning system - slightly less expensive than the SpinClean, but it works very well, and also protects the labels; I should stress I do NOT like their fluid, however - I make my own solution. I also have an anti-static brush and gummy stylus cleaner too. For me, this combo works. I'd love to get one of those awesome vacuum machines, but they're' really out of the range of most collectors when it comes to price, unfortunately...

@brianconneranweig1772

3 жыл бұрын

I have a Vinyl Styl cleaner as well and love it. I use the Spin Clean solution and get great results.

While not as convenient at the spin clean, I’ve found that a label protecting clamp, a cleaning solution and a Paint Pad work way better. The paint pad really gets in those grooves. The only thing that makes this a slower process is the label protecting screw clamp (about $20 on Amazon)

@johncochran5509

3 жыл бұрын

I have good luck with this method as well (protecting clamp, paint pad), tho I’ve never tried the spin cleaner.

@koprcord5338

3 жыл бұрын

I have some used records ultrasonically cleaned and was not satisfied with the sound so made a vinyl vac attachment for a few bucks and two paint pads, one to wash one for rinse. Fantastic method if your willing to put in the time.

I honestly use a dry swiffer pad to dust any records I buy. Because of it's design, it actually does a pretty good job getting dust, grime and dirt off the surface and the grooves.

All of your recommendations are agreed ironically I still have and use my dishwasher kit with zerostat and love it! I would say there is one item I would add to your list that I feel is a must. That is stylist force gauge I have two and maybe about twice a year I will double check just as a feel good my tone arm weight. Nope it never changes. But I did recently move houses and bet I made sure my tone arm was adjusted properly. Even if it never changed it is a pice of mind because it hurts when you needle goes ripping across your favorite album 💿 makes one want to cry 😭

@Channel33RPM

3 жыл бұрын

Good call on the stylus force gauge.

@davedavenport8176

3 жыл бұрын

@@Channel33RPM Thanks and I love your Chanel and the information you put out

@davedavenport8176

2 жыл бұрын

So I as I watched this video one more item came to mind it actually goes hand in hand with the Stylus weight force gauge. What is it? A level make sure your turn table is level. Simple item that is actually very important or I think 🤔 so!

Hello Frank ! Excellent video. I checked off 6 from your list , but not the anti stat. For myself , I’d like to ad my argon leather mat and my center weight. Stay safe.

@Channel33RPM

3 жыл бұрын

After reading some of these comments, I am not also eyeing a leather turntable mat!

I never had to geek out like this with my 1968 Magnavox Astro-Sonic console. You tossed a record in and clicked the auto and it sounded awesome. Then you danced.

For a few dollars you can use a plasma arc lighter as an anti-static gun. Much cheaper than a Zerostat!

Back in the late 70s early 80s my friend had a needle brush that mounted on the shell head. Even after cleaning before playing that brush would pick up what looked like dust. Looked like a tiny flat paint brush.

my fluance record brush stylis gauge onzow stylis cleaner thats my needs for best sounds have a great week

Ok Frank…you talked me into getting a Spin Clean. These days, my new records are only out to play and then it’s right back in their three layers of sleeves. Got a lot of older inventory and some recent used LPs that could use a nice bath. That Milty Zerostat is intriguing. I would maybe add a storage solution to the list since they need to be kept as vertical as possible.

@Channel33RPM

3 жыл бұрын

Good luck with the Spin Clean! Good call on the storage solution. Frank

@bigirishe

3 жыл бұрын

The spin clean is absolutely worth it!

@tomkershaw4384

2 жыл бұрын

I recommend the Zerostat highly. One way to test its effectiveness after treating is to slide a piece of tissue paper over your record . It should slip right off.

I live on Long Island in New York. Specifically on the south shore on the water. The Atlantic Ocean is my backyard. The humidity here is literally 75% to 85% sometimes in my house. I obviously use an air conditioner/dehumidifier to combat it but it doesn’t help much. Anyways. I still get SUPER static that I battle everyday. It never ends. Lol.

@Channel33RPM

3 жыл бұрын

The struggle is real!!!

hey frank...cool video....right now, the only essential of my record collection is collecting records....although i do wanna get a spin clean one day....good stuff all around....best to the family...peace to you always...rocky

@Channel33RPM

3 жыл бұрын

Stay well my friend!

Hey Frank, I'm Chris, a follow Winnipeger. I started following your channel a few weeks ago & like your content. I agree with all of your points in this video & have a few recommendations/points of my own: 1) When possible, buy a used Zerostat device. I have purchased two of them for only $40 each. In fact, I'm waiting for FedEx to deliver one today. 2) From what I hear, liquid stylus cleaners should not be used on some aftermarket styli. Some of these liquid cleaners have caused separation of the stylus from the shank. For this reason, I chose to use the Fluance dry stylus brush. 3) There are three types of GrooveWasher brushes that can be attached to the GW brush handle: - Black Terry Microfiber Pad - Suede Style Microfiber Pad - Black Magic Cleaning Pad I'll be buying all three options myself, when I can afford the expense. Chris

If I bought those outer sleeves for every record I have, I could afford an ultrasonic cleaner. Lol

@Channel33RPM

3 жыл бұрын

Not far from the truth...

For static, I use a rechargeable plasma candle lighter. It works really, really well. ten bucks for two of them.

Great video. Great Channel 👍

@Channel33RPM

2 жыл бұрын

Thank you! 👍

For Me it we have to be number 1 carbon fiber brush number 2 Groovenater record cleaner solution. Number three 3 the inexpensive record vac. Number 4 the onzow zero dust / magic eraser for your stylus. number 5 , 3 mil rice papwr inner sleeves . Number 6, 3mil outter sleeves. Number 7 , anti static cork mat

@Channel33RPM

3 жыл бұрын

Good list!

I pre-ordered the humminguru. Hope it works well

I am fond of the "groove master" label protector. for blasting thrift store records clean under the tap. I plan on trying a product called tergiklee.

Frank, I use Pfan-Stat record cleaner with a Discwasher brush. Kills any static on the LP and cleans all in one. I live in a low humidity area and never suffer from static on my records. The manufacturer of my cartridge suggests to not use a stylus cleaning solution as it may negatively affect the bond of the stylus to the cantilever. Onzow works great. I am a little surprised you put the LP in a good sleeve and then into the outer sleeve with the opening at the top on both. Seems to be counter to good dust control on the LP.

Great tips as always. I am waiting on my first Canada Storage Solutions order. I found my last batch of MOFI innersleeves to be a bit larger cut and did not fit back into album sleeve easiy. You mentioned you had covered why you store outside of the sleeve. Can you update as I cannot find the video. Thanks for all the fun and useful information.

@Channel33RPM

3 жыл бұрын

Thanks Jeff. I will do a vid on that soon. Cheers.

I would suggest the Disco Antistat record cleaner because unlike your third tip the Antistat cleaner has brushes with fine hairs either side of the record which gets into the grooves. I have been using the same one for over 6 years and it has transformed my old records. The only downside is the litre bottle of cleaning fluid supplied, it leaves a residue on the record. I make my own cleaning solution so that's not a problem now.

Static control is far more important and difficult to achieve than the value of outer sleeves to me.

Thanks Frank! I use the drum gel pads instead of a stylus brush. I think you mentioned it in the Hacks video. It's more affordable than the other gel. I always wanted to get a ZeroStat gun especially when I lived in the northern Rockies. Now im in a humid area all year long and not sure if it's as worth it.

@Channel33RPM

3 жыл бұрын

Yes, the drum pads are great!!!!

I use an arc lighter, (for lighting candles), to reduce static. Seems to work as well as the zerostat but only costs about 8 dollars. I was shocked at how well it worked, (shocked, ha).

@Channel33RPM

3 жыл бұрын

I am going to have to track one of those down and check it out!

@seanflannery777

2 жыл бұрын

@@Channel33RPM amzn.to/2VK3PzX

I use two directional clothes brushes from The Reject Shop. 3 Bucks each. One used with BioDegadeable White board cleaner and the other with Ironing water instead on the Discwasher brush and fluid. Better. Also, I don't use outer sleeves any more as they can create a chemical disturbance with the inner sleeve and "Haze" your LP creating heavy distortion. I've had this a couple of times and used "PLASTX" to remove the haze. Hard work but worth it if you love the LP and it's rare. 3 thousand plus outer sleeves thrown out or recycled. This is after I culled my collection and now, do not have anything not worth playing.

Haha! I'm LIKE number 33! It's a sign, Frank. Keep on spinnin'. :)

Great video Frank! This is beneficial to all who collect and play records. I’d like a link to your video about storing the record behind the cover. I’m on the fence about this. Thanks!

@Channel33RPM

3 жыл бұрын

Now that I am looking for it, I am not sure if I have a video just about (I think I mention it in my room tours). I may have to do a dedicated video on this topic. Frank

@jmfloyd23

3 жыл бұрын

@@Channel33RPM Hi Frank! That would be a great topic to discuss. How do others store their records?

I use the Groovewasher brush, but their cleaning solution leaves some stuff in the grooves that gets picked up by my stylus, so I make my own stuff now. For deep cleaning I bought a Knosti Disco Antistat II. But it's a tricky thing to use that one. I want to write a review about i anytime soon.

Cleaning cloth, cleaning solution, a record cleaning brush and something to keep the stylus clean. Don't use anything else. Never used outer sleeves as the extra thickness takes too much space. Since your channel concentrates on vinyl, is there any chance of showing pictures of your subscribers turntables and their hi fi gear. Something similar to the rooms videos you did. I would find it interesting.

@thorbampougias311

3 жыл бұрын

Nope... you don't use out sleeves? Yes you save space,and you destroy the coves, cleaning solution spay? Nope only laundry machine for records.

Awesome video brother

@Channel33RPM

3 жыл бұрын

Thanks 👍 JC

Excellent video Frank. like you, I store my records outside the jacket. Maybe I'm just anal about things but I turn the rice paper side of the inner sleeve toward the outside. You can't see the record but I feel it gives the records just a little bit more protection.

@Channel33RPM

3 жыл бұрын

I should do that as well, with the inner sleeves. Thanks!

Great show Frank. Always love your accessories shows and "Hacks". The next one on my list is the spin-clean washer. Just a quick question but how hot did your music room get a couple of months ago when Canada had that big heat wave. Did it create lots more static on your records and was the zerostat brought into action ?? Keep on spinning !!!

@Channel33RPM

3 жыл бұрын

Thanks Graham. It has been +30 C where I am almost every day now for 2 months (ready for a break - lots of smoke in the air from fires too - has barely rained this year). We didn't get the +48C though (that was further west). My basement (where the music room is) typically gets humid in summer, so we actually have to use a de-humidifier from June to September every year, to keep the humidity around 45-50%. Cheers man!

My advice is to use stylus cleaning fluid sparingly and not too often. Any liquid on the stylus can migrate up the stylus potentially degrading the cartridge suspension.

You should use a humidifier in the room you store your LP's and also your playback room. Better sound quality and no static.

For me the MoFi Geodisc is an essential tool for properly aligning any cartridge. It's so simple to use and completely worth the price!

2:00 The classic Discwasher is fantastic and yes, the later RCA version was garbage apparently and did not clean records properly while just pushing the dust around the grooves. Classic Discwasher brushes can fetch pretty enthusiastic prices on eBay since vinyl lovers recognize their quality and reliability. :)

@danmartinez5502

3 жыл бұрын

Yes you are right RCA cheapens the pad and changed the formula. Jensen sold Discwasher to Recoton then it went to RCA in 2003 and went down hill.

@Channel33RPM

3 жыл бұрын

The classic is the best!

Another great video! Hey I know this is channel is about vinyl but how about a video about care of CDs and Tapes? Oh and to answer your question to me abotu RSD drop 2 I didn't pick up anything new but my RS had Good Vibrations 30 years of the Beach Boys box set on CD soI picked that up.

@Channel33RPM

3 жыл бұрын

I'll definitely keep that in mind Dan. Thanks!

I have almost one identical from Big Fudge

I’ve had my full Discwasher cleaning set since the early 80’s. It seems to last forever. Perhaps that’s why the manufacturer disappeared.

I have a disc washer form the early 80s, still. It's been kept in a box, and looks like it did a long time ago. Could I still use it, with some new cleaning solution?

how about a good turntable light? useful for skipping to those deep cuts!

I have the Zerostat Minty and i was wondering if the crystal inside of it ever needs replaced and how to go and do it...also, how long does a crystal that's in side of it last?

Great video Frank as usual 👏 You should repeat this every year or so as new items come out on the market. I have an older original Zerostat that is still functional, an original Discwasher kit with the stylus brush, a Spinclean (that I haven't used yet) and the record sleeves ftom Vinyl Storage Solutions. Those sleeves are amazing!! All the new records I bought over the last few years at RSD are in a milk crate waiting to get cleaned. Lol. What do you think about adding an air purifier to your list? Also I have linear tracking turntable and you can't put the tone arm down unless the platter is turning. So would I be able to use the Onzow manually? Thanks Frank! Keep on spinning 👍

@Channel33RPM

3 жыл бұрын

You can use an Onzow manually, yes. Using the cueing lever is more of a safety precaution against shaky hands.

@jimb2416

3 жыл бұрын

@@Channel33RPM thanks! What about adding an air purifier?

Hey Frank, have you had any issues using the Zerodust on your Ortofon 2M Blue? The website says not use one, so I was wondering what your experience may be.

@Channel33RPM

3 жыл бұрын

I have not had any issues. I wonder why they caution against it? The only issue I could see, is if you slip, or jerk it around, you could really damage your needle.

6:14 I bought a brand new 'Fritz the Cat' soundtrack recently on Amazon and it arrived already having fine scratches on the vinyl due to the cheap paper sleeve included. I just couldn't believe it and I had bought a different album as part of the same order ('Alice' by Meatbodies) which was in a nice plastic sleeve and was absolutely flawless and perfect .

@TheVinylGuru

3 жыл бұрын

That sucks!

@Cimone90

3 жыл бұрын

PRO TIP! rip the paper sleeve open and lift the lp instead of sliding the lp out.

@TorontoJon

3 жыл бұрын

@@Cimone90 Thanks, Peter. Yes, that is a great tip. :)

@Channel33RPM

3 жыл бұрын

That sucks... and all too common.

@Cimone90

2 жыл бұрын

@Taco oh I never would with one with artwork, but regular paper ones I just rip them open and put into a nice inner sleeve

Bout Time , had all that stuff - but not anymore . Missing :( Keep On Spinin