I've always been a Mopar guy, but I have found myself really wanting one of these trucks. Your truck is about what I pictured of what I'd want to do to one. Your truck is very nice!

@AllTimePerformance

Жыл бұрын

Thanks 👍

@armandovaldovinos1110

Жыл бұрын

This shit made me smile any LS turbo headers and tune will keep up with almost anything

@hernanbarrios6305

Жыл бұрын

@@armandovaldovinos1110 no ac?

Man it looks great simple and clean.

"These trucks are extremely hot right now" THAT'S a SERIOUS understatement. If you have one, you're blessed! Had mine for 28 years. Your truck looks great bro. 👍 I subbed

@dreamersgarage8307

10 ай бұрын

My dads uncle bought his brand new in 1989 then went to my dad in the early 90’s and I grew up in the passenger side. It was sitting for 5 years n my dad didn’t want it no more I said I always wanted to restore it as it brings good memories, well now it’s mine and I. Was gonna go 100% oem restored but I have a LS3 and the truck already has a new 700r so I am gonna lower it with some wheels.

@nonameisthename138

10 ай бұрын

@@dreamersgarage8307 Congrats bro 💯

LOVE THE TRUCK ....ME AND MY DAD FINISHD REBUILDIN HIS 1992 REG CAB SHORT BED MONTH BEFORE HE PASSD

Very Nice! I have a 95 Silverado and a 6.0LS is going in mine next month.

This thing is clean I have a 93 long bed crew cab lowered two tone paint job but I need a lot of upgrades to the power train

Love the build.

I’m a new owner of a 95 sbo and looking forward to watching this build and learning more about it 🎉🎉.

@AllTimePerformance

8 ай бұрын

New video coming.

That is one damn nice obs, like what you have done so far

Nice job. I have a 94 Silverado black and red interior. Love the tail lights on your truck.

@AllTimePerformance

8 ай бұрын

Yeah very nice tail lights.

Working on restoring my 90 right now. I love what you've done with your truck. I'm torn between a boosted lq4 or an all motor lq9 with a healthy cam, heads, and intake. Leaning more toward N/A at the moment. I'll sub for more content on the truck. 👍

Sweet truck, Got to chat with you about it at C10 Nationals this year. So many content creators turn out to be snobs at shows but you talked to me for 30 minutes about this truck. Super cool dude. I’ll be watching.

@AllTimePerformance

Жыл бұрын

Yeah I remember talking to you. I am glad I was able to meet fan. It was great talking to you.

I blasted my Chrome bumper and sanded it came out great

I’ve seen your truck at caffeine I love it 🔥 I got a 6.0 too but not built that much I think imma put a procharger on mine

Sharp looking OBS GMC

@AllTimePerformance

Жыл бұрын

Thanks

Great video Chris! 💪

@AllTimePerformance

Жыл бұрын

Appreciate it!

very tastefully modded

I prefer the stock taillights but watching yours has me rethinking that, looks great

@AllTimePerformance

Жыл бұрын

I appreciate that!

sweet

Nice clean truck a 6.0 is a LS motor 😅

What are your wheel size / offset,thx your truck is perfect.

Whats the measurements for the truck from the floor to the bottom of truck ? I’m asking because I want to know if I have a 4/6 drop , and your looks way lower then mine . If you can help me with that , that would be great thanks

What year tahoe did the seats and console come out of?? Direct bolt up? Are your door panels factory??

Put C-5 brakes on your truck. They stop very well and it is not expensive.

What brakes did you go with/suspension setup?

Beautiful truck, what size rims, and tires and offset?🇺🇸👍

What your tire and wheels size??? Lowering heights???

I must know where you got those tail lights??

💪🏾

Love the truck building a white OBS with twin turbo LS. May i ask who makes the GMC grill emblem thank you

@AllTimePerformance

8 ай бұрын

I can’t recall where I got it from. I think eBay.

😍😍😍😍😍

what oil pan u running mines dropped 5/6 and truck oil pan sits lower them frame

@AllTimePerformance

8 ай бұрын

It’s a f-body pan. Holley makes a low pro oil pan.

What starter? I'm having starting issues and I'm being told I need a reduction gear starter.

@AllTimePerformance

Жыл бұрын

Stock start for a late model truck

Buen video y muy bonita troca Me gusta el color blanco

What tire set up you running, I have exact same truck wheel set up and drop but I rub a little. Thank you

@AllTimePerformance

Жыл бұрын

I have my rear funders rolled

@AllTimePerformance

Жыл бұрын

I am running a 305 in the rear

Which engine control harness did you go with?

@AllTimePerformance

Жыл бұрын

had a PSI but I have Holley Terminator X now

Any link to the bed cover ?

@brayangonzalez9901

Жыл бұрын

Link ?

What the guy was asking is how much did you lower tour truck

@AllTimePerformance

8 ай бұрын

5-7 drop.

Love the truck building one extremely similar myself. I'm surprised by your horsepower number with a 408. Richard holdner's Channel he tested a 6.0 with Trailblazer intake truck Norris cam headers no accessories electric water pump 520 crank hp. And everybody always says take 100 hp off at the wheel. I guess that's not accurate? Or yours has much in it, should be able to be around 475 at wheels with good low end type cam and up from there. If 100 off was/is accurate. 👏👍

@AllTimePerformance

Жыл бұрын

Biggest thing that kills my power is the lower compression from the dished -10cc pistons. My LQ9 is build for 20lbs of boost.

@kevinwest3689

Жыл бұрын

@@AllTimePerformance well actually, the Boost mirrors what you have naturally aspirated. You can safely run 20 lb of boost on a junkyard stock crank block and rods 706 heads on a 5.3 but I sure don't know everything, I imagine with dished more than to say an lq4 piston and you could run some seriously higher boost than 20 lb if you wanted. Cant wait till mine is as purdy as yours, I'm liable to sleep underneath it first couple days after it's painted. 👍

@AllTimePerformance

Жыл бұрын

@@kevinwest3689 Yeah my compression ratio is a little lower than a LQ4. I Just know my engine builder gapped the rings for 20lbs and he said the motor would out live the truck in tunned properly. I cant say the same for a stock junk yard LS. A stock LS on 20lbs is on numbered days.

@kevinwest3689

Жыл бұрын

@@AllTimePerformance I've never heard of gapped for a certain level of boost but I'm still learning. I would like to disagree with your tuner but I'm not even a tuner, the gap between my ears could probably handle at least 50 lb of boost lol

@AllTimePerformance

Жыл бұрын

@@kevinwest3689 LOL cleetus has some videos where they did some experiments with sock iron block LS they were lucky to get 5 pass out of them before the blew up.

Where you get the mirrors. Please post link

@AllTimePerformance

Жыл бұрын

ebay

Whats the size of those tires?

@AllTimePerformance

Жыл бұрын

20in

Where do you purchase your cold air intake 😮?

@AllTimePerformance

8 ай бұрын

I made it with some 4in pipe and a 90 degrees coupling

Were can I get those side mirrors?

@AllTimePerformance

Жыл бұрын

rzlightz.com/collections/mirrors/products/88-98-gm-led-signal-mirrors-sport-mirrors

Whats your wheels size , offset etc?

@AllTimePerformance

Жыл бұрын

I dont remember this off the top of my head but will get this information for you. thanks for subscribing!

@AllTimePerformance

Жыл бұрын

Rear- 20x10.5 BS 6.25 OS 13 Front- 20x8 BS 4.50 OS 0

Truck for sale?

You have a link to the mirrors?

@AllTimePerformance

Жыл бұрын

I’ll have to dig through my receipts. Check back in a few days.

@AllTimePerformance

Жыл бұрын

rzlightz.com/collections/mirrors/products/88-98-gm-led-signal-mirrors-sport-mirrors

30 min turn sig is CAP.

Who sells the headlights?

@AllTimePerformance

Жыл бұрын

got them off amazon

@AllTimePerformance

Жыл бұрын

rzlightz.com/collections/mirrors/products/88-98-gm-led-signal-mirrors-sport-mirrors

Very uncomfortable cab, with those seats,, Plus a tall guy,,, Why tall guys likes single cab trucks!!!

@AllTimePerformance

Жыл бұрын

I fit fine in it. But I will say I do not ride around with the seat at a 45 degree angle

blah blah blah never shows the fuckin motor

Whats the measurements for the truck from the floor to the bottom of truck ? I’m asking because I want to know if I have a 4/6 drop , and your looks way lower then mine . If you can help me with that , that would be great thanks

@AllTimePerformance

Жыл бұрын

if you have a c notch in the back then it is most likely you have a 4/6 I don't have the truck to measure it