2:20 That ant is running for its life from that awesome sound!

Dude those Hotrod cams sound awesome and I love the wheels. That's one stang done RIGHT. Love it.

@nola504boy1

8 жыл бұрын

LOL thanks

man if I had this setup, I would only drive it with cutouts open. sounds so much better than my 5.0 :(

@nola504boy1

7 жыл бұрын

It's too loud IMO

I kept trying to kill the ant at the bottom of my screen .

@nola504boy1

9 жыл бұрын

Lol

@jormanuikkinen6669

4 жыл бұрын

"it came from desert" :)

@dreygrach

4 жыл бұрын

Bruh thats hecka cute😂

Damn man, hell of a nice sound!! Nicely done with the cutouts as well.

This thing sounds AMAZING! can't wait for my Stang to sound like this!!

Of all the videos you posted, this is the one that sounds the best. Your car looks an sounds great. Love the way it idles.

@nola504boy1

6 жыл бұрын

Roland Landry thanks, it was a fun car.

One of the best sounding s197 man

Superclean! Amazing look…so classic😍

Good looking stang, sounds good too! Chrome Bullitt wheels look great on the color!

@nola504boy1

7 жыл бұрын

The01Cav Thanks man

That thing is clean ... Sweet looking 3valve

This whole car is clean and beautiful

The most beautiful video I have ever seen 🔥🙏

Beautiful Ride man The sound is great 👍

Sounds incredible dude

I could listen to this all day , can you make longer videos ?

I miss your mustang 😞🥺😭

Man now I want some cutouts lol!!!!! Nice bro nice!!!!

@nola504boy1

9 жыл бұрын

Thanks bro it made a huge difference.

I love the Borla S-Type and these, they are the deep sounds I prefer on a V8. Nice ride Bruh.

@nola504boy1

8 жыл бұрын

thanks

@macraggeblues

8 жыл бұрын

I don't think I could get any of those exhausts here in Germany tho... the cops would be all over me in no time. :'D

That thing looks and sounds amazing.

@nola504boy1

8 жыл бұрын

thanks bro

Beastly car and you seem like a cool dude so I subbed, I am graduating in april and with this car you're making my decision between getting a 09 and modding right away or a 13-14 and waiting it out so much harder lol

@nola504boy1

8 жыл бұрын

+Brandon Bradley Get a 13-14 bro. Their fast ass they are so you don't have to rush into modding it. I love my car but i had it before 5.0's came out. You can't beat the performance of a stock 5.0 I'm just being honest.

@toppdogg485

8 жыл бұрын

yeah thats what I hear thanks for the advice. The one thing I do love about the 3v is that lope the cams give, the ghost tunes just aren't the same ha.

@nola504boy1

8 жыл бұрын

+Brandon Bradley no they're not lol. If you put enough money into the 3v they can be quick, but the 5.0 are already fast stock LOL

@smackledorfmcsween

8 жыл бұрын

Brandon Bradley flat top pistons on a 3V w/ properly degreed cams would rival or beat any 5.0 out right now. I love ford engines to death. But, a 3V is deadly when built right. You'd also be shocking the hell out of a lot of people.

Beastly. I love it! :D

I love this car sir... 👍😋

Which electric cutouts are those you had on this 3v? I got electric cutouts installed on my 07 GT, but when I close the valve you can still hear the car making more noise from the middle instead of the rear, but my god they sound like hell is loose when opened.. When you closed the valves on the video the noise was reduced by A LOT, and you can hear the exhaust goes all the way to the mufflers... Mine are eBay cutouts probably why the valves don't completely seal the sound when closed... Thanks in advance 👍

I hope to have mustang like bad ass like this

Car sounds amazing, I remember this was Nate Riders favorite😁, soon this gonna be like mine.

@michaelhillard4158

11 ай бұрын

Love my 06 Windveil blue vert. The 2024 Mustang has a very similar color in vapor blue.

Super cool! What lowering kit do you have on that beauty?

Man she sounds amazing, what’s the full exhaust list you have setup if you don’t mind me asking

dam! sounds sick man!

@nola504boy1

8 жыл бұрын

Thanks bro

nice sound and great car :-)

@nola504boy1

8 жыл бұрын

Thanks

Oh my gawwwwd I love it.

How did the pacesetter longtubes and h pipe hold up.

perfection!!!

I love those cams and yeah what kind of wheels are those?

What kind of cutouts did you use and where do you get them are they electric controlled

Any performance upgrade with cam?

Do you still have that car? What was the full exhaust setup when you took that video?

Is that 125 shot of NOS on the stock bottom end?

Hey man what’s your set up I like it might want to do it on mine

What power gains did it give you

Are you running any mufflers behind the cutouts?

What size rims do you have installed

thaz the sound !.."like a lot" :D

What hot rod cams are installed in this video anybody k ow

Sheeesh!

Man that thing sounds good!!!

@nola504boy1

9 жыл бұрын

Thanks bro

@mgerren88

9 жыл бұрын

Yea its sick...aye Chris Frazier when you posting some more vids of that beast you...and check out vids on my channel fellas...

@nola504boy1

9 жыл бұрын

Yeah I know Chris doesn't post enough vids of his beast. Ok mgerren88 I'm about to check yours out now. Sub to mines as well bro.

@2BrotherProductions1

9 жыл бұрын

nola504boy1 Sounds mean. Congrats

@mgerren88

9 жыл бұрын

Ight nola504boy1 been subscribed man...ight we do a lil running down here in thibodaux, la...nothing like the pad in da city tho lol

3v sounds good with just about any setup..4v can't compare sound when it comes to a 2v or 3v...but I'm not talking hp just sound..

Oh my Goodness

Nice car bro

@nola504boy1

8 жыл бұрын

Thanks

what’s the RPM at idle here?

hey nola!! i was thinking of getting long tube headers. and i noticed in the description you have pacesetter long tube headers!! i saw these on american muscle for a fraction of the cost of what everything else is selling for, have you ran into any problems at all with them ?

@nola504boy1

7 жыл бұрын

No I like them, only issue is the paint burns off them

1/4 mile time?

Might be a stupid question but would you post up a vid of data logging? i can't seem to find one and have not tried to do it yet because of that.

@nola504boy1

9 жыл бұрын

Not a stupid question at all. I can do that because I need to do another tune because of my electric cutouts, when they're open the car isn't getting any back pressure so I want them to tune for the cutouts. I'll datalog & record it

Badass 👍

sounds good!

@nola504boy1

9 жыл бұрын

Thanks

I know this is an old video. Looking to get some. What brand cut outs were these and do you recommend? Did they ever leak?

@nola504boy1

4 жыл бұрын

Tony I forgot the name, they were DHM or something like that. They never leaked or anything.

what’s the cam specs

Love the car beautiful!!!...sounds amazing You from new orleans or texas?

@nola504boy1

9 жыл бұрын

Thanks bro, I'm from New Orleans but I stay in Houston.

@04Bl0wnCobra

9 жыл бұрын

nola504boy1 ahhh ok...i see the usernane then i saw the license plate so i had to ask lol in from denham about an hour from NO i hear alot goes on in Houston friend of mine goes up there alot drives a black mach 1

Were there any issues with the Pacesetter headers and h-pipe during install? Clearance issues? Did they come with all the necessary gaskets and o2 extensions? I have read mixed reviews about these headers, but you can't beat the price for the ceramic coated ones and they are 1 3/4 instead of 1 5/8. Any help or insight you can give me would be much appreciated! Beautiful car and sounds freakin sweet!

@nola504boy1

8 жыл бұрын

+Clean93GT Thanks bro, but only issue I had was it rubbing against the steering colum at first. After that everything was okay.

hey bro, did you upgrade your fuel pump or plugs? and if not is it still running good?

@nola504boy1

7 жыл бұрын

Yes I upgraded my plugs to a colder plugs because I'm running nitrous. Still have the stock fuel pump

Love the way the car sound in looked bro what side rims are those in how many inches is its drop bc I have a mustang just like yours dude

@nola504boy1

8 жыл бұрын

Thanks, the wheels are 20x8 & 20x10 in the rear. I have the eibach sportlines springs for the drop.

@DeJay023

8 жыл бұрын

+nola504boy1 ok thx bro :)

nice

Did you have to change out your springs with the cams

@nola504boy1

7 жыл бұрын

No

Say bro which cam you think would be best for my 2011 gt bro, um stuck. .i know the gains or not like ls motors..but i want as much as i can get out my gt n/a...this wt i have installed so far, cobra jet intake manifold, cold air, throttle body, 3.73 gears , bbk long tube headers and xpipe??? Would really like your opinion an thoughts on possible gains..thanks

@nola504boy1

9 жыл бұрын

Stage 3 comp cams. But like you said the gains are no where near the same as a LS motor. You'll gain around 30-35 rwhp with them on your coyote.

@mgerren88

9 жыл бұрын

nola504boy1 once again thanks...much appreciate it...um trynna get at least 530-600 to flywheel n/a bro

@nola504boy1

9 жыл бұрын

You must be buying heads also then right?

wat springs are u using and wat drop I need this setup!

@nola504boy1

8 жыл бұрын

Eibach sportline springs

how streetable was this car cam wise before you changed the gears ? could you take distance trips in it?

@nola504boy1

8 жыл бұрын

Yes never had any issues

Dude was this with/without the M80's (when closed)? Those resonators killed the lope right?

@nola504boy1

8 жыл бұрын

no this wasn't it. I had pypes violators in this video

@YouPube_X

8 жыл бұрын

+nola504boy1 cool thanks man, m80s removed and the violators on. Gotcha. I appreciate the quick replies.

How much did you lower the car? What springs?

@nola504boy1

9 жыл бұрын

Eibach sportlines

Sounds mean!

@nola504boy1

8 жыл бұрын

Thanks

Nice

@nola504boy1

9 жыл бұрын

Thanks

This is a clean ride! Have you done anymore upgrades?

@nola504boy1

8 жыл бұрын

Thanks bro, no I added 4.10 gears since this video that's all.

@FASTU-mz3tm

2 жыл бұрын

@@nola504boy1 naaaahhhhh this cant just be cams and exhaust, this engine sound build up, no way its a stock a 4.6..........................

@prodigioustortuga1107

Жыл бұрын

@@FASTU-mz3tmCam Swap.

Brooo...sounds sick.How does the electric cutouts work and how much to install

@nola504boy1

8 жыл бұрын

Just a button I press & it open & close my exhaust. So I'm quiet or loud whenever I want to be I love it.

@jaspaldhunna2395

5 жыл бұрын

@@nola504boy1 where did you put the cutouts?

all those mods on a stock engine? just wondering because I have every single bolt on my car ,I want to add nitrous but I'm scared I'm going to blow up the engine.

@nola504boy1

8 жыл бұрын

Stock engine can hold 450-500 rwhp without a problem with a good tune. Tune has a lot to do with it.

@blackrooster91

8 жыл бұрын

Thanks bro I might do it then

I've been searching for your account on Instagram but couldn't find it

@nola504boy1

5 жыл бұрын

davidv my Instagram is mustang_rider_

Eyyyy look who I found.... Lol its mustangmooch bro

@nola504boy1

8 жыл бұрын

Lmao what's up

Ant taking a stroll at 2:23 lol

@nola504boy1

9 жыл бұрын

LOL I saw that

Torque thrust 20's?

@nola504boy1

9 жыл бұрын

Eric Hovermale American muscle 20's

what degree?

@nola504boy1

8 жыл бұрын

not sure

did you just quiet the cams?? I didn't even know you can do that

@nola504boy1

8 жыл бұрын

Lol yes, I have electric cutouts so I can be loud or quiet by just pressing a button.

@brucesoto90

8 жыл бұрын

that's awesome bro, I wanna get cams soon

@brucesoto90

8 жыл бұрын

how much did that run you? the cams with the electric cut offs

@brucesoto90

8 жыл бұрын

outs*

@nola504boy1

8 жыл бұрын

+Bruce Soto cams were around $800 + $500 labor. Cutouts were around $300 + $250 labor

where is the electric cut out located?

@nola504boy1

6 жыл бұрын

Dyson Williams on the h pipe

@smoke_oguwop

5 жыл бұрын

nola504boy1 did you buy one or two

sick cams bro will that do any type of damage to the vehicle? ?and what about a ghost tune do you know of that

@nola504boy1

9 жыл бұрын

No the cams won't hurt the car. If you on a 5.0 you can ghost cam it. But there's no ghost cams available for the 3V.

what's the idle set to in this video?

@nola504boy1

7 жыл бұрын

John Whitehead I'm not sure bro. I think it was at 740 in this video. It's at 690 now

@theonetheycallsix2526

7 жыл бұрын

nola504boy1 sweet because i just got the hot rod cams in yesterday and looking to get cut outs next and hows driving around with it at 690?

@nola504boy1

7 жыл бұрын

John Whitehead it's fine no issues. My video with me idling with my drag setup is at 690. Check that video out

@theonetheycallsix2526

7 жыл бұрын

oh I've seen them all haha very gorgeous car you've got , you're the one that made me pull the trigger on the hot rods

@nola504boy1

7 жыл бұрын

John Whitehead lol ok cool man. If you have any questions just ask brother. I'm doing a total different build now. No more nitrous I'm doing a turbo setup now

man I'm not a ford guy but got dang that thing sounds so good

@nola504boy1

7 жыл бұрын

Thanks brother

IS this just a tune?

@189646

7 жыл бұрын

He probably had it tuned but the sound 99% comes from the hot rod cams and the exhaust cutouts

@nola504boy1

7 жыл бұрын

Brian James you're right bro

Bruh you have an ant 😂😂

Those 20 inch rims

@carlitosbrillante3329

3 жыл бұрын

Wanna know exactly what size of tires and width of rims

fucking badass

@nola504boy1

8 жыл бұрын

thanks bro

@YouPube_X

8 жыл бұрын

+nola504boy1 yeah that is sick man. Gonna do the same on mine now! Love it!

@nola504boy1

8 жыл бұрын

+Gavin F thanks man.

@nola504boy1

8 жыл бұрын

+Gavin F the car is actually slower with the Cutouts open due to not having any back pressure. I only open them for car shows & car meets.

@YouPube_X

8 жыл бұрын

+nola504boy1 thanks for the info! Yeah i want it just for the sound when the occasion arises. Ill keep it closed for the the hard driving. Once again man, best sounding s197 i've heard so far!

Who does your tunes bro? I got my custom ones from Mpt and the freakin suck! I did my own custom one on there was better than there's im terrified to run the nitrous tune they sent me now that my kits hooked up lol.. It smokes a good bit and is a turd with no spray I mean not anywhere even close to stock hp torque wise can't be right Huh lol?

@nola504boy1

9 жыл бұрын

Lol I use Bama tunes. I haven't had any problems with them. I have free tunes for life with Bama. You see how my car performs with the Bama tune. It beats a lot of car with custome dyno tunes all the time. When Bama sends me a tune what I do is datalog it & send it back to them. The look at what the car is doing and make changes where it's needed. Most people just get a tune and never datalog it.

@nola504boy1

9 жыл бұрын

David Martin Yes I can help you bro

Deficit ride tube characteristic sudden actress orange pull deliver adjustment penalty.

Believe it or not like it better with no cut outs! Sounds so low tone and fat!

Yup I kinda jumped the gun lol they wanted me to get it and data log it lmao I didn't know I was just like what the hell did Yall do to my car bro lol

@nola504boy1

9 жыл бұрын

LOL yeah send it back to them so they can see what your car is doing. The tubes they send to people are generic tunes.

@nola504boy1

9 жыл бұрын

Yeah bama

@nola504boy1

9 жыл бұрын

I don't have any issues with mines. But like I said I usually datalog mines

@nola504boy1

9 жыл бұрын

yep

NAAAAAAAAHHHHHHHHHHH..... IM not eating this, this engine is not just cammed and exhaust, this thing sounds build up..............................

Oh my Goodness