Must see!! Budget Super kayak Lifetime Tamarack angler (links in description)
Lifetime Tamarack angler kayak review rundown with mods.
including kayak outriggers, push pole, anchor trolley, anchor, milk crate, upgraded seat, hatch, anchor pole, cooler, tethers, pole holders, stand assist strap, baitboard, pontoons, etc.
amazon affiliate links! please support the channel 🙏!
kayak, lifetime Tamarack
amzn.to/3z5GIBf
outrigger floats
amzn.to/3Od9DYs
outrigger rod holders
amzn.to/3AP3nD0
anchor trolley
amzn.to/3yF0fGZ
hatch
amzn.to/3Iz19JM
tethers
amzn.to/3IAoZES
baitboard
amzn.to/3uMzFKW
chair
amzn.to/3AP3L4q
bait knife
amzn.to/3yGbSNW
scupper plugs
amzn.to/3o2vZRu
anchor pole clips
amzn.to/3AN0By0
anchor
amzn.to/3uLf89C
boat cleat
amzn.to/3ANUw4D
milk crate
amzn.to/3nXXZps
cooler
amzn.to/3IzPzxY
Пікірлер: 524
gearcloud.net/diy-kayak-outriggers/ Diy tutorial for outriggers.
@adamfulco1556
5 жыл бұрын
Awesome
@samuelvigil392
5 жыл бұрын
Fishy fingers I just bought the tamarak 100 and want the outrigger setup you have up front but dont really want to cut big hole and add hatch just to bolt rod holders. Is there an alternative way to properly secure them. If not do you think I could mount them a little further back from where you first put yours to avoid paddling issues. I've already ordered the parts. I'm very impressed with how your yak came out. Any advice will be greatly appreciated. Thanks F.F please reply
@lfaulk36
5 жыл бұрын
You say tamarack 120?
@sergeantklein6026
4 жыл бұрын
Samuel Vigil kayak rivets
@samuelvigil392
4 жыл бұрын
@@sergeantklein6026 thanks D. Just now putting it together
this is by far the best mode update on this kayak i have seen. good job bud
dude, you went ham on this Tamarack! Respect!
@ninjabic
5 жыл бұрын
I tried spray painting the scupper plugs too and they immediately chipped lol. tilted me out so I bough black ones off amazon.
@KayakKingdom
5 жыл бұрын
@@ninjabic I'm all about function over astetics! But if I can make it functional AND aesthetically pleasing, I'm all about that too! LoL
@dj_crusherr1523
3 жыл бұрын
@@KayakKingdom what diameter is that front hatch and does it leak around the edges as i want to add this but don't want to take on water thru it? Ty my email is djcrusherr@gmail.com
@KayakKingdom
3 жыл бұрын
8" hatch on amazon. look it up, they're pretty much all the same. you have to use nuts and bolts, because tightening it straightens on the slight "v" dip in the front. a little bead of silicone around the entire perimeter of the hatch and your golden
@dj_crusherr1523
3 жыл бұрын
@@KayakKingdom i found a 9" hatch but I might be pushing it lol I want to fit a battery in the front I added boat bumpers to mine, 3" cushioned stadium seat, custom crate (walmart brand) triple rod holder, paddle leash, dive flag, led flashlight stern light, battery box with usb ports, cigarette plug, volt gauge connected to two momentary switches which will measure 11.1v LIPO4 battery and the trolling motor 12v battery I like your mods the only thing I havent done is the tomato pole and the anchor trolley
Thoroughly enjoyed your videos there buddy. We share a lot of similarities in between our kayaks and not just brand, make, model, and color but ideas. And given me a lot to think about and I truly appreciate it. I hope you have a nice safe time in your kayaking adventures.
Nice Kayak, I'm digging the front hatch and the stabilizers. Definitely going to try doing both.
SWEET.. I really dig everything you did too your kayak seems like you thought of everything.👍👍
Best mods to this model, to-date!! Great job, thx for the ideas!!
Some very thoughtful and useful mods. Thanks for sharing.
Wow! You decked it out nicely.
Lots of pretty brilliant ideas and solutions. i'm marking this one for future reference. Thank you for posting this.
I love your ingenuity. Great job, man
Great mods bro! All you're missing is a trolling motor! Your well thought out attention to detail makes my ocd very happy!! Great job!
Congratulations great job. We have similar float stabilizers on our two Kayaks. For grab-n-go we purchased two inexpensive large duffle bags to store life jacket, basket, float stabilizers, and fishing gear. Both Kayaks are then carried on fold down J racks on top of SUV.
Truly inspiring, great and genius job with all the adaption.
Solved my bait board need. Thanks for some great ideas for me.
Very nice setup. Everything looks handy and quick to get at.
Very well done. I'm 68 and need some extra's to help me along. I'm looking at a lot of ideas, and so far for simplicity for my needs, it looks promising.
Very thoughtful! Excellent presentation. Thanks so much.
NIce job! Love the Stabilizers!
Outta hand quality ... really enjoyed the tour
Thx for this man, tight lines.
MacGyveryak! Brilliant.
WOW!! I just picked up my Tamarack Angler today and even though I had a lot of ideas already, your video gave me even more! I’m definitely going to consider the stabilizers now. Thanks so much for sharing your great, creative mods!
@KayakKingdom
5 жыл бұрын
Thanks!
@TheFishingMommy
5 жыл бұрын
Fishy Fingers have you considered doing a detailed video on exactly how you made your stabilizers?
@KayakKingdom
5 жыл бұрын
@@TheFishingMommy unfortunately, I sold the yak and got a center console boat. But I followed this DIY. (With some modifications) gearcloud.net/2017/07/diy-kayak-outriggers/
@KayakKingdom
5 жыл бұрын
For the price it's a great kayak. Mine was dirty and dusty (no damage) from being stored in the patio section at walmart. Just from mentioning how it was dirty I got walmart to lower the price to $230.00 from 279.00 lol
Sweet set up. I love the kayak. Lots of good ideas.
Real ingenuity love it
My goodness I love this. Im going to do all these things to mine
I like how much you upgraded the Tamarack... shows me what i can do to mine! thanks and happy fishing buddy
Thanks for the great idea definitely doing this with mine when it worms up i have the same kayak
i just ordered mine. cant wait.
Awesome set up I like the cutting table removable Niceeeeee 👍👍👍👍👍
Thanks for some really great ideas
Awesome. Gave me some great ideas. Thanks.
Awesome idea for the stabilizers and hatch !! nice vid!
@KayakKingdom
5 жыл бұрын
Thanks. Alot of work went into it. Hopefully have another one soon. After I get the skiff up and running proper
Very creative and budget friendly 👌 👍
Clever stuff. Nice video.
Having owned several kayaks in the past, I can say this build is awesome. You have everything that the high dollar kayaks have. Nice work on this!
@KayakKingdom
5 жыл бұрын
Thanks! Even having an actual boat. Which I love! I miss this little kayak
@KayakKingdom
5 жыл бұрын
It's called a micro power pole. And unfortunately its about 600$ out the door
That's a really great looking boat
Bad ass set up on a budget
Man... Lots of good ideas for mods.
Thanks for some great ideas
Sweet great setup
Love the stabilizers
Wow man, u went crazy on that thing! Mod champ!! Nice build
@KayakKingdom
4 жыл бұрын
still stayed under $400-450 max
Love the mods bro ! igot the same kayak, thanks for the motivation and the upload.
@KayakKingdom
6 жыл бұрын
Thanks man. I enjoyed working on it. Was fun. And enjoying fishing out of it even more!!
New friends here from Trail Trash Outdoors! Love the stabelizers! I have the same kayak and would love to have something simular! Thanks for sharing you have one sweet ride!
Great video! Thanks. I'm getting one!
Very nice work. It looks similar to some of the early versions of my Superyak.
Nice job bro impressive work on the kayak
Fishy....A "shout out" to YOU for this video. It was the outriggers that you made, that motivated me. I took your basic design and added outriggers to my Ozark Trail Pro Fisherman (same as Boss 12 SS). BUT....I added pivoting joints so that I can push a button and fold the pontoons up vertically. The outriggers work GREAT !! THX.
@CoconutWaterfalls
3 жыл бұрын
I would love to know what outrigger parts you got. i really want to do this to mine. amazing idea!
@ricksoutdooradventures5250
3 жыл бұрын
@@CoconutWaterfalls Bro....I am swamped right now, but i'll start gathering the parts & pieces and at least post something within the next couple weeks. Here's a link to the joints I used...... Link adjustajoints.com/ and here's one for the top cross-bar support.... kzread.info/dash/bejne/Yp-qp8eEedGTnaw.html Hope these help, for now. The cross bar between the two outriggers "is key" to successful stabilization. Without the cross-bar between the two, there is a LOT of flex on each individual side....not good.
Nicely done, thanks
Nicely Done 👍🏼
Need some links to where you found all this gear! Nice job!
PEACE...EXCELLENT walk through and work done , you are detailed and experienced....
U did a great job!
Unreal, and awesome
@KayakKingdom
5 жыл бұрын
Thanks so much for
Great ideas!...nice job....
Very nice mods.... I think this is the nicest Tamarack I have seen tricked out; Good Job. I own several expensive Yaks to include the 2019 Hobie Outback but, I can say the Tamarack for under $300 is one of the best small yaks I have spent 6 hours on in the Arkansas Buffalo river, it tracks really well for how cheap it is. I am gonna buy one for my daughter this Spring and give me an excuse to trick it out too haha. Keep up the vids, I am a new Yak channel and will def be checking yours out.
Love the stabilizers!!! I’m 150lbs I can stand in this kayak but it’s real sketchy. Hands down for what you pay you can’t beat the tamarack.
@KayakKingdom
5 жыл бұрын
Add the stabilizers they make a huge difference. Anytime the yak wants to roll the stabilizers stop it from rolling.
Luv it bro!!! About to get my 1st kayak and I definitely use alot of your ideas!!! Checking in from the Dallas Tx Metroplex!!! Thanks for sharing!!
@KayakKingdom
5 жыл бұрын
No problem. Dont forget to subscribe!
@hortfishing2812
5 жыл бұрын
Hey Michael check Oceans State Job Lot they have a kayak for $250 ship to store and its a battleship (big) it was there were I got mine in camo! kaya fishing its another game best regards to you and family.
I have this exact kayak haven’t done much to it yet but boy do I have the ideas now well your ideas thank you
@KayakKingdom
4 жыл бұрын
no problem man. I want people to use these ideas 💡, it took me a lot of internet research and brainstorming to finish this kayak. I posted it for others to have ALL that info in 1 video
@melodygarrison7531
3 жыл бұрын
Fishy Fingers thanks again
thats a cadillyak of of kayaks well done dude
@chappelchastain9194
5 жыл бұрын
I see what you done there
Nice job, I have the same kayak and was just looking for ideas.
Nice job!!
That tomato stake shallow anchor is genious!!!
@KayakKingdom
Жыл бұрын
it's not. after several uses. being hollow it is not up to the task and will bend. better going to grainger and getting a fiberglass rod
@jefferybarron929
Жыл бұрын
@@KayakKingdom thank you Fort he reply. Even with that, in premise tho, still genius.
Subbed and ordered outrigger parts. Thanks
Awesome! 👍
Nice job!
Awesome!
@KayakKingdom
4 жыл бұрын
thanks!
Such an obvious idea!!!!! Thank you so much for sharing.
@jdalend
4 жыл бұрын
When I say obvious I mean why didnt I think of that....excellent idea.
@KayakKingdom
4 жыл бұрын
@@jdalend which part? LoL
@jdalend
4 жыл бұрын
Using rod holders as a place to attach the rigs...
Nice Man!👍
Nice kayak set up.
Thats a dope kayak!! Im gana make one!!
@buddyhield7462
5 жыл бұрын
Sell u mines lol
Great video! I'd love to see more videos of your kayak or you slaying some bass on it
@KayakKingdom
5 жыл бұрын
Sold it. Bought a 17 ft. Center console boat
this vid shows me what is possible.
I have three Tamaracks. They are pretty stable starting out. But I really do appreciate you posting this video. I learned a lot from it. And don't be bothered by all of the other morons that want to condemn you for some reason. I don't know why but there's a bunch of haters in the world. Keep on doing what you're doing!
Nice job
Like the idea
Looks like you did a nice job
Your stabilizers are genius. I never thought of using rod mounts for a temp mount. And the shallow anchor is pretty nice too. Scupper hole is a good idea, except it would be in the way when fishing
@KayakKingdom
5 жыл бұрын
You can also put it through the anchor trolley
@cleatussfmo7437
5 жыл бұрын
@@KayakKingdom right. I was just pointing out that scupper mount would get in the way. Great idea none the less.
Nice set up you got there...
@KayakKingdom
6 жыл бұрын
Thanks!
Have a great weekend
More videos please! 😎
Best setup I’ve seen for the Tamarack or similar. I am starting to get close to your configuration and raised the seat, put on some outriggers (in the back in my case) but am starting to see the negatives as well. The setup and breakdown for each trip is killing me, I need to streamline it somehow or something. Sometimes I daydream about my first simple sit-inside kayak lol. Just grab your poles and go.
@KayakKingdom
4 жыл бұрын
I just order a vibe shearwater 125. I hauled it on my pickup bed with a hard tonneau cover so left almost everything on. except the stabilizers which come off with the press of 1 button.
I'M DEFINITELY GONNA USE SOME OR YOUR IDEAS!!!, WILL GIVE YOU A SHOTOUT WHEN I DO!!!
@KayakKingdom
6 жыл бұрын
Josean Rivera let me know if you have any questions.
Awesome
wow you have so many good ideas on this thing. I hope it’s still serving you well
@KayakKingdom
4 жыл бұрын
sold it and bought a 17ft bay boat. but I wish I would've kept it for really skinny water
@chrisroach4022
4 жыл бұрын
Fishy Fingers sometimes you can’t beat a boat. glad you recorded video of the rig though, i’d love to use some of your ideas. you did it the right way for sure
Nice rig!
@KayakKingdom
3 жыл бұрын
thanks! check my other vids I got a new rig
@mickeyjohnson2127
3 жыл бұрын
That outrigger link is dead. Do you have an up dated link?
Sick mods man
Good video I subscribed....getting ready to get one for Christmas. I hope to add vids also. God bless. I’m like you I want all the necessities and be prepared always.
I have one of these, best thing I bought for $200+
Nice fishing rig.
Hella cool
Thank you, I was wondering about the parts with the clips
@KayakKingdom
5 жыл бұрын
Gus Cardenas ya, those are or were rod holders made by brocraft, the poles are pvc
@jodale1972
4 жыл бұрын
@@KayakKingdom What size PVC did you use?
@KayakKingdom
4 жыл бұрын
i pinned the DIY to the top of the comments section. its a step-by-step on how to make the stabilizers. make sure to use all stainless steel hardware.
Sweet
Love the set up I'm big guy ide love one bit busted my knees bad had surgery need one replaced. So the seats to low for me. But also busted up my back so yea of I could find higher seat and with the stabilizers ide love to go out in one. But been looking at the roundabout really want one of them. It great video I'll deff remember some of the stuff you did. Have a great week. God bless you
Have to say, the "power pole" through the scupper drain holes is brilliant! I'm kicking myself for not thinking of that! I wonder if a telescoping painters pole or similar would fit so you could adjust the length of the pole for what depth you're in. Hmm
@KayakKingdom
4 жыл бұрын
you could. but if its not fiberglass or stainless, it'll rust with a quickness
@bennytierney
2 жыл бұрын
@@KayakKingdom What clips did you use to attach the stake to the side of the kayak?
@KayakKingdom
2 жыл бұрын
@@bennytierney clips are for a boat "anchor light" stotage. look up on amazon
Wow 👍
@KayakKingdom
3 жыл бұрын
new kayak coming dont forget to subscribe
First video where I dont feel like you just youtube copy and paste I really want a nice setup like this but all the stuff you see is literally stadium seat and anchor line like that guy did thanks for the video
Those stabilizers in the bow of the kayak are a great idea. Thanks for posting this video; it was very enjoyable to watch. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@KayakKingdom
6 жыл бұрын
Norwood BayBridge thanks man
Pimp my kayak...Lol. This kinda reminds me of guys with their Ar 15s who kit them out with every attachment under the sun but the difference is your attachments are useful.
@KayakKingdom
4 жыл бұрын
I have a glock 17 with attachments. No AR..........yet