Great video !

Trying to realign w/o Embrillance Essentials was 😬, purchased Essentials over the weekend….Game Changer! Reducing time and mistakes. I noticed the basting was getting caught in my design making it harder to pick out without destroying my stitches. So I pin my fabric to the stabilizer and skip the basting stitch by hitting the spool+ sign once, it advances to the actual design. If I need to move the design side to side, I write down the mm and used the same dimensions for the second half to keep alignment. The repositional hoop and software that offers split design expands what you can do with a 4 x 4 machine. So if you’re looking to start small don’t think that you’re limited. Use the software and hardware on the market to expand your creativity. Good luck!

You can use the same coordinates and that’s how ur able to line it up so it connects properly

Thank you! I will be getting the software. What do you do if your design needs more space up or down? I can only stitch something 4 inches high?

@BreanaFaith

3 ай бұрын

The software will allow the file to size down and/or up a bit. Another option is to split the design into two like I did in the video.

do you have a video of how you did the rehooping method?

@BreanaFaith

Ай бұрын

yes, here is the video --> kzread.info/dash/bejne/pXeezcqiqNCng7g.html

Can we use a 5x7 too for a multi position hoop on the Brother PE or only a 4x6?

@BreanaFaith

3 ай бұрын

I do not believe that a 5"X7" would work because the field can only go out 4" at a time. The field varies by machine so it would depend on which one you have. Most of the multi-position hoops will say what machines they are compatible with before you purchase them.