Velf Creation is top tier for tips and tricks with the F1 ! Since following, I have learned so much. If you liked this video and any other video, please give them a follow and a like it helps them out so much !

@VelfCreations

5 ай бұрын

Thank you so much for the support! You’re the best!

Great video! Thanks!

Love the swan! Stunning 🤩

@VelfCreations

5 ай бұрын

Thank you! 😊

loved the swan one

Love All of them...

Here it is 👍🏼

I the origami one loook really good 👍

AWESOME

Great tutorial! New to laser field but am eager to learn. Thank you for sharing your expertise. I have a 34 1/4" x 41" x 1/2" piece of plywood to close off our fire place during summer months and I would like to burn some type of patch pattern design on it. I know the project size is limited on the pass thru of the F1 but I have not experimented with it yet. It seems logical that with the laser head set at the lowest z axis position shooting laser thru the opening with base plate removed the project area would increase, if that makes sense. Have you experimented with this at all?

Can you show how to take a picture like Mario and break it into sections that you can set differently. I’m having trouble understanding how to prepare the image

Need more vids like this. Anyone think this could be possible on airpod cases?

@VelfCreations

5 ай бұрын

Thank you! We will keep them coming! AirPods case unfortunately only really engrave in a grey color.

@VelfCreations

5 ай бұрын

To be specific you can engrave on AirPods cases, we have videos on that. But not different colors. Hope that helps!

@LegacyOutlook

5 ай бұрын

@@VelfCreations it does thanks. It’s be really cool if they could get different color

How much time did each piece take?

okay I blow away !!!!! how coooooooooooooooool , any tag is work or have to some special tag?

@VelfCreations

Ай бұрын

Thank you! They are just normal stainless steel tags! But sometimes you may get different results. Some stainless changes colors better than others

Hello, thanks for the video, where can I get the configurations for all the colors? greetings

@VelfCreations

27 күн бұрын

There are files on Xtools projects websites that have test grids you can run. Each metal is a bit different so if one color works for us it may not work for you. Running a test grid always helps!

HI! Thanks for the video! Do you know how I can duplicate the image using a MacBook? I just got an F1 today and trying out different projects. Your videos are very helpful. Thanks!

@VelfCreations

3 ай бұрын

If I am understanding correctly you just want to have 2 copies of the photo in XCS? If so you can select your photo and click CMD and C on your keyboard then CMD V to paste a copy. I believe you can also right click on the image to duplicate it.

@allthingscre8ted

3 ай бұрын

Thanks! It worked. @@VelfCreations

@VelfCreations

3 ай бұрын

You bet! Happy to help

Looking for the round stainless blank you used for the swan - do you have an affiliate link or source?

@VelfCreations

2 ай бұрын

Hey, these are just ones we already had laying around, but we ordered a few that look similar and will arrive today, we will do a test to make sure we get similar results and will let you know

@VelfCreations

2 ай бұрын

@janepanzer5084 The ones we received from amazon are a bit bigger but engraved the swan design just as well, here is our affiliate link if you are interested amzn.to/4aTPNge

I have the S 1 - can the colors be done with it? I’m not understanding how the colors appear 😮

@VelfCreations

4 ай бұрын

Yeah technically you should be able to, we believe. If you have done a test array before on the S1 it will help a lot to see what colors you can get. Unfortunately we don’t have one, sorry!

Hi, tried to download the files but the Google Drive folder is empty. Are these files still available?

@VelfCreations

2 ай бұрын

Hey should be fixed, give it another try and let me know if you still have issues

Hallo how can I engrave on pvc cards what is the settings thanks a lot for your such a videos ❤

@VelfCreations

5 ай бұрын

Hey 👋 We haven’t tried PVC and just a warning for anyone else who doesn’t know engraving PVC releases some really toxic fumes so you need to either engrave outside or have really good ventilation. With that being said we would use the IR laser, power set to 100% and a really high speed maybe 1500 to start and work our way down. Use 300 for lines per cm Hope that helps

@ferdowssadat9643

4 ай бұрын

Thank you so much will gonna try it and I have watched this full video and give the same settings on my keychain to make such black smile but it turned to golden brown color not really black any other settings please 🙏 😊 that I can try it

Thank you! When I open the Google Drive folder, I only see the Multi-color xcs file which is the origami swan. Is the smiley flag file supposed to be there too?

@VelfCreations

2 ай бұрын

Yup there are multiple examples all under their own canvases

@michelle45827

2 ай бұрын

@@VelfCreations Found it! Learned something new :) Thanks!

@VelfCreations

2 ай бұрын

@@michelle45827 Hey Awesome! Happy to help 😄

can you please do a video for the F1 to make clear acrylic lights no one has a video on how to make and create these with the f1

@VelfCreations

5 ай бұрын

Could you explain what the clear acrylic lights are? To make sure we are understanding correctly

My F1 laser has small gap between blue lase and IR one. So do you know how to align them?

@VelfCreations

5 ай бұрын

We will look into this! And let you know!

@janepanzer5084

5 ай бұрын

Check out this KZread video at about 5:14 for fixing F1 focus: kzread.info/dash/bejne/hoagk8FqXaeXgrw.htmlsi=UasmwsRT21fAiuFq This worked for me. I didn't have to move mine as hard as in the video.

@VelfCreations

5 ай бұрын

@@janepanzer5084 Awesome! that’s perfect thank you for sharing!

Can you showbus how to engrave a photo on stainless steel?

@VelfCreations

Ай бұрын

Hey, So sadly we are actually not huge fans of how photos are engraved on stainless, that's why we never made a video to cover it. The photo looks fine when you look at it at a very specific angle but it mostly looks like an X-ray. Also every photo will need different settings but if you want to give it a try this may be a starting point IR Light Bitmap Mode: Jarvis Dot Duration: 1500 Power: 100% DPI: 900

Thank you for the video! It says the folder is empty, would you please add the file back? I would love to try it!

@VelfCreations

2 ай бұрын

Weird! I think it is fixed now, it was a permissions thing. Give it another try if you still have issues let me know

@williamolson5358

2 ай бұрын

@@VelfCreationsThank you, it's there now, I can't to try it out!

What material do the keychains have?

@VelfCreations

5 ай бұрын

Stainless steel

@trendit5370

5 ай бұрын

@@VelfCreations do the colours work on 925 Silver?

How to know when to use IR or Blue

@VelfCreations

27 күн бұрын

Typicall IR would be for Metals, Plastics and blue light for wood, acrylic, leather, leather, paper, stone. Really it’s just trial and error. If it doesn’t work with one you switch to the other. But there is an “xTool F1 Official” Facebook group that helps a lot. A lot of users including us will post settings on their of projects that we have made. Hope that helps!

I downloaded your video and it comes out to 69 mm. How do I resize it or is that the correct size? Thx!

@VelfCreations

3 ай бұрын

You can resize it to any size you want

I only see one file on Google drive

@VelfCreations

5 ай бұрын

Hey! Yup it’s one file but when you open it up all the projects are on the bottom tabs in XCS. Hope that helps!

Hello ! Do you know how Setting white letter ?with F1 Material is stainless steel

@VelfCreations

5 ай бұрын

Hey unfortunately we haven’t really found a setting for white with stainless. Aluminum does turn a nice bright white at full power and higher speeds around 400. Sorry we couldn’t help with this!

@user-zd5co5hu3t

5 ай бұрын

@@VelfCreations I understand!! Do you think impossible white letter with F1? (Power weak maybe ?:() Thank you !

@VelfCreations

5 ай бұрын

Possibly or very fast speed, but it might be hard to see the engraving. We will do some tests and let you know if we are able to get a good result

@user-zd5co5hu3t

4 ай бұрын

@@VelfCreations really thank you !! I hope can possible white letter with F1! Waiting!

@Danny-vv5wl

2 ай бұрын

I'm also very curious how to engrave white color. But in stainless steel. I have these stainless steel discs with a gold coating and online you see people who engrave it in white. But mine always turns out black. Just curious how to be able to do both!